- 15 10月, 2009 13 次提交
-
-
由 Eilon Greenstein 提交于
When working with DCC, a function can be disabled or enabled (virtual link down or up). Using the function state introduced some race conditions with the load/unload flow. Using a separate flag to indicate that the function is disabled. Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Value of zero was used to disable the fairness mechanism. Though the code (driver and FW) allowed changing the value at run time, it did not allow to do that if the mechanism was disabled to begin with. Fixed the FW to allow turning on and off the mechanism at run time. Fixed the code to read the value from the chip at the right sequence. Without this fix, if the initial value was set to zero, traffic could not run on the interface. Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
sock_queue_rcv_skb() can update sk_drops itself, removing need for callers to take care of it. This is more consistent since sock_queue_rcv_skb() also reads sk_drops when queueing a skb. This adds sk_drops managment to many protocols that not cared yet. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Sailer 提交于
Signed-off-by: NThomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
The Phonet "universe" only has 64 addresses, so we keep a trivial flat routing table. Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rémi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Reported-by: N"Tony Luck" <tony.luck@intel.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Acked-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2009 18 次提交
-
-
由 Thomas Gleixner 提交于
The lock_kernel/unlock_kernel() in cycle_kernel_lock() which is called in tun_chr_open() is not serializing against anything and safe to remove. tun_chr_fasync() is serialized by get/put_tun() and fasync_helper() has no dependency on BKL. The modification of tun->flags is racy with and without the BKL so removing it does not make it worse. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Sriram 提交于
The mechanism to clear the statistics register is dependent on the status of GMIIEN bit in MAC control register. If the GMIIEN bit is set, the stats registers are write to decrement. If the GMIIEN bit is cleared, the stats registers are plain read/write registers. The stats register clearing operation must take into account the current state of GMIIEN as it can be cleared when the interface is brought down. With existing implementation logic, querying for interface stats when the interface is down, can corrupt the statistics counters. This patch examines the GMIIEN bit status in MAC_CONTROL register before choosing an appropriate mask for clearing stats registers. Signed-off-by: NSriramakrishnan <srk@ti.com> Acked-by: NChaithrika U S <chaithrika@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Extracted from Realtek's 8.012.00 r8168 driver. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Tested-by: NSimon Farnsworth <simon.farnsworth@onelan.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manuel Lauss 提交于
Extend the driver to accept a MAC address specified in platform_data. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manuel Lauss 提交于
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Commit 5675f221 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Commit 337e067d overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Commit 23d26497 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Commit fd8235bb overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ajit Khaparde 提交于
Commit 59aa3cc4 overlooked the way offsets for netdev stats were considered. Because of this some of the stats shown by ethtool -S were wrong. This patch fixes it. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Add sysfs entries to enable register and memory access for diagnostic tools. Signed-off-by: NNarender Kumar <narender.kumar@qlogic.com> Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Since register and onboard memory access has separate window registers, they need not be kept under same lock. Also, memory is always accessed from process context (mostly for firmware init and diagnostic tools). Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Use common variables crb_win, ocm_win for all revisions of chip. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Add access to on chip memory, this is used by debug and diagnostic tools only. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Sub 64-bit / unaligned access to oncard memory was only used by old diagnostic tools, causes some intermittent issues when memory controller agent is used. The new access method was added by commit ea6828b8 ("netxen: improve pci memory access"). Firmware init anyway uses 8-byte strides. This also fixes address/offset calculation for NX2031 context memory (SIU). For NX3031, SIU uses same register offsets as packet memory (MIU). Signed-off-by: NAmit Kumar Salecha <amit@netxen.com> Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2009 9 次提交
-
-
由 roel kluin 提交于
The bit V_MAC_RX_PL_THRSH(4) was already set a few lines higher. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
The negation makes it a bool before the comparison and hence it will never evaluate to true. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 roel kluin 提交于
Looking at commit ebc3f64b it appears that this was intended and not the original, equivalent to `if (facilities.reverse & ~0x81)'. In x25_parse_facilities() that patch changed how facilities->reverse was set. No other bits were set than 0x80 and/or 0x01. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karen Xie 提交于
This patch added support of private MAC address per port and provisioning packet handler for iSCSI traffic only. The above changes are isolated to the cxgb3 driver, independent of any scsi or iscsi driver changes. Acked-by: NKaren Xie <kxie@chelsio.com> Acked-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NRakesh Ranjan <rakesh@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Magnus Damm 提交于
Add Runtime PM support to the sh_eth driver. The clock to the ethernet hardware block will be enabled as long as the network device is up. Signed-off-by: NMagnus Damm <damm@opensource.se> Tested-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Magnus Damm 提交于
Extend the sh_eth driver to allow passing the mac address using the platform data structure. This to simplify board setup code. Signed-off-by: NMagnus Damm <damm@opensource.se> Tested-by: NKuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfgang Grandegger 提交于
This patch allows the CAN controller driver to define the number of echo skb's used for the local loopback (echo), as suggested by Kurt Van Dijck, with the function: struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max); The CAN drivers have been adapted accordingly. For the ems_usb driver, as suggested by Sebastian Haas, the number of echo skb's has been increased to 10, which improves the transmission performance a lot. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NKurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Instead of hardcoding NET_IP_ALIGN stuff in various network drivers, we can add a helper around netdev_alloc_skb() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Storing the mask (size - 1) instead of the size allows fast path to be a bit faster. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-