- 16 5月, 2018 2 次提交
-
-
由 Xiaojie Yuan 提交于
Fix the NULL pointer dereference while running amdgpu_test: [ 54.972246] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 54.972265] IP: (null) [ 54.972273] PGD 0 P4D 0 [ 54.972280] Oops: 0010 [#1] SMP PTI [ 54.972288] Modules linked in: amdkfd amd_iommu_v2 amdgpu(OE) chash gpu_sched ttm drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep intel_rapl snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_seq snd_seq_device kvm irqbypass snd_timer crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd soundcore joydev input_leds aesni_intel aes_x86_64 crypto_simd glue_helper cryptd idma64 virt_dma mei_me intel_lpss_pci serio_raw intel_cstate intel_rapl_perf shpchp intel_pch_thermal mei mac_hid intel_lpss acpi_pad parport_pc ppdev nfsd lp auth_rpcgss nfs_acl lockd grace sunrpc parport autofs4 hid_generic [ 54.972434] usbhid mxm_wmi e1000e psmouse ahci hid libahci wmi pinctrl_sunrisepoint video pinctrl_intel [ 54.972457] CPU: 6 PID: 1393 Comm: uvd Tainted: G OE 4.16.0-rc7-27fb84fda777 #1 [ 54.972473] Hardware name: MSI MS-7984/Z170 KRAIT GAMING (MS-7984), BIOS B.80 05/11/2016 [ 54.972489] RIP: 0010: (null) [ 54.972497] RSP: 0018:ffffaea002c8bcc0 EFLAGS: 00010202 [ 54.972508] RAX: 0000000000000000 RBX: ffff9d30d3c56f60 RCX: 00000000007c0002 [ 54.972522] RDX: 000000000001a6fb RSI: 000000000001a6e9 RDI: ffff9d30d3c56f60 [ 54.972536] RBP: ffffaea002c8bd10 R08: 0000000000000002 R09: ffffffffc06977d0 [ 54.972550] R10: 0000000000000040 R11: 0000000000000000 R12: 0000000000000002 [ 54.972564] R13: ffff9d30d3c5001c R14: ffff9d30d3c50000 R15: 0000000000000006 [ 54.972579] FS: 0000000000000000(0000) GS:ffff9d30eed80000(0000) knlGS:0000000000000000 [ 54.972594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 54.972606] CR2: 0000000000000000 CR3: 00000002dbc0a001 CR4: 00000000003606e0 [ 54.972620] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 54.972634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 54.972648] Call Trace: [ 54.972685] ? gmc_v9_0_emit_flush_gpu_tlb+0x111/0x140 [amdgpu] [ 54.972721] uvd_v7_0_ring_emit_vm_flush+0x31/0x70 [amdgpu] [ 54.972751] amdgpu_vm_flush+0x5dc/0x6c0 [amdgpu] [ 54.972787] ? pp_dpm_powergate_uvd+0x50/0x80 [amdgpu] [ 54.972816] amdgpu_ib_schedule+0x120/0x4e0 [amdgpu] [ 54.972850] amdgpu_job_run+0x17b/0x1c0 [amdgpu] [ 54.972861] drm_sched_main+0x2cc/0x490 [gpu_sched] [ 54.972873] ? wait_woken+0x80/0x80 [ 54.972882] kthread+0x121/0x140 [ 54.972891] ? drm_sched_job_finish+0xf0/0xf0 [gpu_sched] [ 54.972902] ? kthread_create_worker_on_cpu+0x70/0x70 [ 54.972914] ret_from_fork+0x35/0x40 [ 54.972922] Code: Bad RIP value. [ 54.972932] RIP: (null) RSP: ffffaea002c8bcc0 [ 54.972943] CR2: 0000000000000000 [ 54.972951] ---[ end trace 5feb349263bbf633 ]--- Signed-off-by: NXiaojie Yuan <Xiaojie.Yuan@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
This adds support for writing and reading back using the helper since the engines doesn't have a oneshot packet. Reviewed-by: NHuang Rui <ray.huang@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 3月, 2018 1 次提交
-
-
由 Oak Zeng 提交于
This is preparation for sharing client ID definitions between amdgpu and amdkfd Signed-off-by: NOak Zeng <Oak.Zeng@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 2月, 2018 8 次提交
-
-
由 Christian König 提交于
Stuffing the PASID mapping into the VM flush isn't flexible enough since the PASID mapping changes not as often as we need a VM flush. v2: add missing use of gmc_v7_0_emit_pasid_mapping Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Keep that at a common place instead of spread over all engines. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Add emit_reg_wait implementation for UVD v7. v2: call new function directly from the existing code Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
All HDP invalidation and most flush can now be replaced by the generic ASIC function. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Unify tlb flushing for gmc v9. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Needed for vm_flush unification. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
rd the pasid from the VM code to the emit_vm_flush function and update all implementations with the new parameter. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
And rename it to struct gmc_funcs. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NSamuel Li <Samuel.Li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 28 12月, 2017 1 次提交
-
-
由 Christian König 提交于
sed -i "s/vm_id/vmid/g" drivers/gpu/drm/amd/amdgpu/*.c sed -i "s/vm_id/vmid/g" drivers/gpu/drm/amd/amdgpu/*.h Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 13 12月, 2017 1 次提交
-
-
由 Christian König 提交于
And also provide the level for which we need a PDE. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 12月, 2017 3 次提交
-
-
由 Shaoyun Liu 提交于
Remove the header where it's not used. Acked-by: NChristian Konig <christian.koenig@amd.com> Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Shaoyun Liu 提交于
Acked-by: NChristian Konig <christian.koenig@amd.com> Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Shaoyun Liu 提交于
Handle dynamic offsets correctly in static arrays. Acked-by: NChristian Konig <christian.koenig@amd.com> Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 12月, 2017 1 次提交
-
-
由 Lucas Stach 提交于
This moves and renames the AMDGPU scheduler to a common location in DRM in order to facilitate re-use by other drivers. This is mostly a straight forward rename with no code changes. One notable exception is the function to_drm_sched_fence(), which is no longer a inline header function to avoid the need to export the drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures. Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 07 12月, 2017 7 次提交
-
-
由 Feifei Xu 提交于
Remove asic_reg/vega10 folder. Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Feifei Xu 提交于
Cleanup asic_reg/vega10/NBIF folder. Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Feifei Xu 提交于
Cleanup asic_reg/vega10/MMHUB folder. Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Feifei Xu 提交于
Cleanup asic_reg/vega10/VCE folder. Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Feifei Xu 提交于
Cleanup asic_reg/vega10/UVD folder,remove unused uvd_7_0_default.h. Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Feifei Xu 提交于
Cleanup asic_reg/vega10/HDP folder, remove hdp_4_0_default.h Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Piotr Redlewski 提交于
When UVD bo is created, its size is based on the information from firmware header (ucode_size_bytes). The same value should be be used when programming UVD mc controller offsets, otherwise it can happen that (mmUVD_VCPU_CACHE_OFFSET2 + mmUVD_VCPU_CACHE_SIZE2) will point AMDGPU_GPU_PAGE_SIZE bytes after the UVD bo end. Second issue is that when programming the mmUVD_VCPU_CACHE_SIZE0 register, AMDGPU_UVD_FIRMWARE_OFFSET should be taken into account. If it isn't, (mmUVD_VCPU_CACHE_OFFSET2 + mmUVD_VCPU_CACHE_SIZE2) will always point AMDGPU_UVD_FIRMWARE_OFFSET bytes after the UVD bo end. v2: move firmware size calculation into macro definition v3: align firmware size to the gpu page size Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NPiotr Redlewski <predlewski@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 05 12月, 2017 2 次提交
-
-
由 pding 提交于
When this VF stays in exclusive mode for long, other VFs will be impacted. The redundant messages causes exclusive mode timeout when they're redirected. That is a normal use case for cloud service to redirect guest log to virtual serial port. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: Npding <Pixel.Ding@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Monk Liu 提交于
this member will be used later, it will points to the real var inside of context and CS_SUBMIT & gpu schdduler can decide if skip a job depends on context->guilty or *entity->guilty Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChunming Zhou <David1.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 26 10月, 2017 1 次提交
-
-
由 Tom St Denis 提交于
The workaround is not required anymor and would result in hangs during suspend/resume cycles if the uvd block were busy. Signed-off-by: NTom St Denis <tom.stdenis@amd.com> Acked-by: NLeo Liu <leo.liu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 27 9月, 2017 1 次提交
-
-
由 Monk Liu 提交于
Signed-off-by: NMonk Liu <Monk.Liu@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 8月, 2017 5 次提交
-
-
由 Frank Min 提交于
1.Since in sriov there is no need of decoding, so skip the related code; 2.Vcpu boot up and umc enable need to take at the end of the init sequence; Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank Min 提交于
Now uvd doorbell is from 0xf8-0xfb and vce doorbell is from 0xfc-0xff Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank Min 提交于
Since rptr would not be accessed on later secure asics in sriov, remove the ring test. Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank Min 提交于
Add uvd and vce re-init after gpu reset. Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank Min 提交于
MMSCH FW need to get the wptr from 0 after it get the mailbox request from driver, since every time kick the mailbox, mmsch thinks that it is the first time engine start to initialize. Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 6月, 2017 1 次提交
-
-
由 Tom St Denis 提交于
Signed-off-by: NTom St Denis <tom.stdenis@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 01 6月, 2017 1 次提交
-
-
由 Christian König 提交于
Rename adjust_mc_addr to get_vm_pde and check the address bits in one place. v2: handle vcn as well, keep setting the valid bit manually, add a BUG_ON() for GMC v6, v7 and v8 as well. v3: handle vcn_v1_0_enc_ring_emit_vm_flush as well. v4: fix the BUG_ON mask for GFX6-8 Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 25 5月, 2017 3 次提交
-
-
由 Christian König 提交于
That GFX9 needs a PDE in the registers is entirely GFX9 specific. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NChunming Zhou <david1.zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank Min 提交于
According to HW design, need to clean doorbell after setup MMSCH table. Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: NMonk Liu <Monk.Liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Trigger Huang 提交于
On vega10, some hw finish operations should not be applied in SR-IOV case. This works as workaround to fix multi-VFs reboot/shutdown issues. Signed-off-by: NTrigger Huang <trigger.huang@amd.com> Reviewed-by: NXiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: NMonk Liu <monk.liu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 29 4月, 2017 2 次提交
-
-
由 Frank Min 提交于
Add UVD hw init. Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Frank Min 提交于
Add UVD doorbell for SRIOV. Signed-off-by: NFrank Min <Frank.Min@amd.com> Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-