To check whether a given file extent is referenced by multiple snapshots, the
checker walks down the fs tree through dead root and checks all tree blocks in
the path.

We can easily detect whether a given tree block is directly referenced by other
snapshot. We can also detect any indirect reference from other snapshot by
checking reference's generation. The checker can always detect multiple
references, but can't reliably detect cases of single reference. So btrfs may
do file data cow even there is only one reference.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

A large reference cache is directly related to a lot of work pending
for the cleaner thread.  This throttles back new operations based on
the size of the reference cache so the cleaner thread will be able to keep
up.

Overall, this actually makes the FS faster because the cleaner thread will
be more likely to find things in cache.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This changes the reference cache to make a single cache per root
instead of one cache per transaction, and to key by the byte number
of the disk block instead of the keys inside.

This makes it much less likely to have cache misses if a snapshot
or something has an extra reference on a higher node or a leaf while
the first transaction that added the leaf into the cache is dropping.

Some throttling is added to functions that free blocks heavily so they
wait for old transactions to drop.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Inode ref item can be in the next leaf when we find "path->slots[0] ==
btrfs_header_nritems(...)".
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Remove a unused variable 'path' in fixup_tree_root_location.
Signed-off-by: NBalaji Rao <balajirrao@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Checksum items are not inserted into the tree until all of the io from a
given extent is complete.  This means one dirty page from an extent may
be written, freed, and then read again before the entire extent is on disk
and the checksum item is inserted.

The checksums themselves are stored in the ordered extent so they can
be inserted in bulk when IO is complete.  On read, if a checksum item isn't
found, the ordered extents were being searched for a checksum record.

This all worked most of the time, but the checksum insertion code tries
to reduce the number of tree operations by pre-inserting checksum items
based on i_size and a few other factors.  This means the read code might
find a checksum item that hasn't yet really been filled in.

This commit changes things to check the ordered extents first and only
dive into the btree if nothing was found.  This removes the need for
extra locking and is more reliable.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Stress testing was showing data checksum errors, most of which were caused
by a lookup bug in the extent_map tree.  The tree was caching the last
pointer returned, and searches would check the last pointer first.

But, search callers also expect the search to return the very first
matching extent in the range, which wasn't always true with the last
pointer usage.

For now, the code to cache the last return value is just removed.  It is
easy to fix, but I think lookups are rare enough that it isn't required anymore.

This commit also replaces do_sync_mapping_range with a local copy of the
related functions.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before, extent buffers were a temporary object, meant to map a number of pages
at once and collect operations on them.

But, a few extra fields have crept in, and they are also the best place to
store a per-tree block lock field as well.  This commit puts the extent
buffers into an rbtree, and ensures a single extent buffer for each
tree block.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* In btrfs_delete_inode, wait for ordered extents after calling
truncate_inode_pages.  This is much faster, and more correct

* Properly clear our the PageChecked bit everywhere we redirty the page.

* Change the writepage fixup handler to lock the page range and check to
see if an ordered extent had been inserted since the improperly dirtied
page was discovered

* Wait for ordered extents outside the transaction.  This isn't required
for locking rules but does improve transaction latencies

* Reduce contention on the alloc_mutex by dropping it while incrementing
refs on a node/leaf and while dropping refs on a leaf.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

It was possible for stale mappings from disk to be used instead of the
new pending ordered extent.  This adds a flag to the extent map struct
to keep it pinned until the pending ordered extent is actually on disk.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Data checksumming is done right before the bio is sent down the IO stack,
which means a single bio might span more than one ordered extent.  In
this case, the checksumming data is split between two ordered extents.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_drop_extents is always called with a range lock held on the inode.
But, it may operate on extents outside that range as it drops and splits
them.

This patch adds a per-inode mutex that is held while calling
btrfs_drop_extents and while inserting new extents into the tree.  It
prevents races from two procs working against adjacent ranges in the tree.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Checksum items are not inserted until the entire ordered extent is on disk,
but individual pages might be clean and available for reclaim long before
the whole extent is on disk.

In order to allow those pages to be freed, we need to be able to search
the list of ordered extents to find the checksum that is going to be inserted
in the tree.  This way if the page needs to be read back in before
the checksums are in the btree, we'll be able to verify the checksum on
the page.

This commit adds the ability to search the pending ordered extents for
a given offset in the file, and changes btrfs_releasepage to allow
ordered pages to be freed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_commit_transaction has to loop waiting for any writers in the
transaction to finish before it can proceed.  btrfs_start_transaction
should be polite and not join a transaction that is in the process
of being finished off.

There are a few places that can't wait, basically the ones doing IO that
might be needed to finish the transaction.  For them, btrfs_join_transaction
is added.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This changes the ordered data code to update i_size after the extent
is on disk.  An on disk i_size is maintained in the in-memory btrfs inode
structures, and this is updated as extents finish.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Higher layers sometimes call set_page_dirty without asking the filesystem
to help.  This causes many problems for the data=ordered and cow code.
This commit detects pages that haven't been properly setup for IO and
kicks off an async helper to deal with them.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The old data=ordered code would force commit to wait until
all the data extents from the transaction were fully on disk.  This
introduced large latencies into the commit and stalled new writers
in the transaction for a long time.

The new code changes the way data allocations and extents work:

* When delayed allocation is filled, data extents are reserved, and
  the extent bit EXTENT_ORDERED is set on the entire range of the extent.
  A struct btrfs_ordered_extent is allocated an inserted into a per-inode
  rbtree to track the pending extents.

* As each page is written EXTENT_ORDERED is cleared on the bytes corresponding
  to that page.

* When all of the bytes corresponding to a single struct btrfs_ordered_extent
  are written, The previously reserved extent is inserted into the FS
  btree and into the extent allocation trees.  The checksums for the file
  data are also updated.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

The existing throttle mechanism was often not sufficient to prevent
new writers from coming in and making a given transaction run forever.
This adds an explicit wait at the end of most operations so they will
allow the current transaction to close.

There is no wait inside file_write, inode updates, or cow filling, all which
have different deadlock possibilities.

This is a temporary measure until better asynchronous commit support is
added.  This code leads to stalls as it waits for data=ordered
writeback, and it really needs to be fixed.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This allows us to delete an unlinked inode with dirty pages from the list
instead of forcing commit to write these out before deleting the inode.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Extent alloctions are still protected by a large alloc_mutex.
Objectid allocations are covered by a objectid mutex
Other btree operations are protected by a lock on individual btree nodes
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The allocation trees and the chunk trees are serialized via their own
dedicated mutexes.  This means allocation location is still not very
fine grained.

The main FS btree is protected by locks on each block in the btree.  Locks
are taken top / down, and as processing finishes on a given level of the
tree, the lock is released after locking the lower level.

The end result of a search is now a path where only the lowest level
is locked.  Releasing or freeing the path drops any locks held.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Split the ioctl handling out of inode.c into a file of it's own.
Also fix up checkpatch.pl warnings for the moved code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs has been using workqueues to spread the checksumming load across
other CPUs in the system.  But, workqueues only schedule work on the
same CPU that queued the work, giving them a limited benefit for systems with
higher CPU counts.

This code adds a generic facility to schedule work with pools of kthreads,
and changes the bio submission code to queue bios up.  The queueing is
important to make sure large numbers of procs on the system don't
turn streaming workloads into random workloads by sending IO down
concurrently.

The end result of all of this is much higher performance (and CPU usage) when
doing checksumming on large machines.  Two worker pools are created,
one for writes and one for endio processing.  The two could deadlock if
we tried to service both from a single pool.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

These ioctls let a user application hold a transaction open while it
performs a series of operations.  A final ioctl does a sync on the fs
(closing the current transaction).  This is the main requirement for
Ceph's OSD to be able to keep the data it's storing in a btrfs volume
consistent, and AFAICS it works just fine.  The application would do
something like

	fd = ::open("some/file", O_RDONLY);
	::ioctl(fd, BTRFS_IOC_TRANS_START);
	/* do a bunch of stuff */
	::ioctl(fd, BTRFS_IOC_TRANS_END);
or just
	::close(fd);

And to ensure it commits to disk,

	::ioctl(fd, BTRFS_IOC_SYNC);

When a transaction is held open, the trans_handle is attached to the
struct file (via private_data) so that it will get cleaned up if the
process dies unexpectedly.  A held transaction is also ended on fsync() to
avoid a deadlock.

A misbehaving application could also deliberately hold a transaction open,
effectively locking up the FS, so it may make sense to restrict something
like this to root or something.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We need to invalidate an existing dcache entry after creating a new
snapshot or subvolume, because a negative dache entry will stop us from
accessing the new snapshot or subvolume.

---
  ctree.h       |   23 +++++++++++++++++++++++
  inode.c       |    4 ++++
  transaction.c |    4 ++++
  3 files changed, 31 insertions(+)
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Use btrfs_release_file instead of a put_inode call
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent_io writepage calls needed an extra check for discarding
pages that started on th last byte in the file.

btrfs_truncate_page needed checks to make sure the page was still part
of the file after reading it, and most importantly, needed to wait for
all IO to the page to finish before freeing the corresponding extents on
disk.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When duplicate copies exist, writes are allowed to fail to one of those
copies.  This changeset includes a few changes that allow the FS to
continue even when some IOs fail.

It also adds verification of the parent generation number for btree blocks.
This generation is stored in the pointer to a block, and it ensures
that missed writes to are detected.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Once part of a delalloc request fails the cow checks, just cow the
entire range

It is possible for the back references to all be from the same root,
but still have snapshots against an extent.  The checks are now more strict,
forcing cow any time there are multiple refs against the data extent.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before, nodatacow only checked to make sure multiple roots didn't have
references on a single extent.  This check makes sure that multiple
inodes don't have references.

nodatacow needed an extra check to see if the block group was currently
readonly.  This way cows forced by the chunk relocation code are honored.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This required a few structural changes to the code that manages bdev pointers:

The VFS super block now gets an anon-bdev instead of a pointer to the
lowest bdev.  This allows us to avoid swapping the super block bdev pointer
around at run time.

The code to read in the super block no longer goes through the extent
buffer interface.  Things got ugly keeping the mapping constant.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>