- 13 12月, 2008 6 次提交
-
-
由 Ben Hutchings 提交于
Replace efx_nic::link_options bitfield with link_speed (speed in Mbit/s) and link_fd (full duplex flag). Remove broken auto-negotiation functions. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Allocate IRQs with the name format <device>[-<type>]-<number> so that future versions of irqbalanced understand what we're doing. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Turton 提交于
In a bidirectional forwarding test, we find that the best performance is achieved by sending the TX completion interrupts from one NIC to a CPU which shares an L2 cache with RX completion interrupts from the other NIC. To facilitate this, add an option (through a module parameter) to create separate channels for RX and TX completion with separate IRQs when MSI-X is available. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This is needed for recovery in case a PHY firmware upgrade is aborted. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steve Hodgson 提交于
Each reset is serialised by the rtnl_lock anyway, so there's no win per-NIC. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Set dummy monitor method for unrecognised boards. Clean up board resources if efx_pci_probe_main() fails after board has been initialised. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
Convert driver to new net_device_ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2008 2 次提交
-
-
由 Ben Hutchings 提交于
The TX watchdog should trigger a reset, but a temperature/power alarm should not as this is unlikely to solve the problem. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
The boot code that appears as a PCI expansion ROM on the SFC4000 is stored in flash. Expose this as a standard MTD device to allow for in-place upgrades. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 28 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2008 3 次提交
-
-
由 Ben Hutchings 提交于
Increase the potential retry count for RX flushes from 5 to 100. Stop polling the RX_DESC_PTR_TBL to infer that a flush might have happened. Instead absolutely rely on the flush events, unless bug 7803 applies (Falcon rev A only). To keep things quick, request flushes for every TX and RX queue up front, and match up the events to requests. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
There was a bug in XAUI synchronisation in early 10Xpress firmware versions. This is fixed in released firmware and we do not need to work around it. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Match pci_request_region() with pci_release_region(), not release_mem_region(). From: Steve Hodgson <shodgson@solarflare.com> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 03 9月, 2008 20 次提交
-
-
由 Ben Hutchings 提交于
When !port_enabled, defer the write to reconfigure_mac_wrapper. Whilst here, simplify the logic now that efx_start_port() always calls efx_reconfigure_port(). From: Steve Hodgson <shodgson@solarflare.com> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
This was originally a kludge to fix broken locking, which has since been fixed properly. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Include PMA/PMD in loopback self-tests as intended. Add NVRAM checksum validation and include it in self-tests. Add register self-tests. Run PHY self-tests where available. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Move more code from efx_reset() into efx_reset_down() and efx_reset_up(). Stop propagating MAC/PHY setting failures from efx_reset_down() and efx_reset_up() as these should not be fatal. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Some functions return an error code which is always 0. Change their return types to void and simplify their callers accordingly. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Update comment on the dummy operation implementations. Line up the board operation initialisers. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Steve Hodgson 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
This allows updating PHY firmware for one interface without removing all other interfaces handled by the driver. Replace tx_disabled flags and 10Xpress status enumeration with flags in enum efx_phy_mode. Prevent an interface from being brought up while in PHY flash mode. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Make efx_process_channel() and falcon_process_eventq() return the number of packets received rather than updating the quota, consistent with new NAPI. Since channels and RX queues are mapped one-to-one, remove return value from falcon_handle_rx_event() and add a warning for events with the wrong RX queue number. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
It is redundant with efx_channel::channel. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Rename efx_nic::rss_queues to the more obvious n_rx_queues Remove efx_rx_queue::used and other stuff that's redundant with it. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
efx_channel::has_interrupt is redundant with efx_channel::used_flags. Remove efx_test_eventq() because it is now obviously unreachable. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
gcc will automatically inline static functions with only one caller, and may inline other functions depending on the kernel configuration and size of the intermediate code. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Replace (cond ? 1 : 0) with cond or !!cond as appropriate, and (cond ? 0 : 1) with !cond. Remove some redundant boolean temporaries. Rename one field that looks like a flag but isn't. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
efx.c does not use hardware workarounds. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Checksum generation is an attribute of our hardware TX queues, not TX descriptors. We previously used a single queue and turned checksum generation on or off as requested through ethtool. However, this can result in regenerating checksums in raw packets that should not be modified. We now create 2 hardware TX queues with checksum generation on or off. They are presented to the net core as one queue since it does not know how to select between them. The self-test verifies that a bad checksum is unaltered on the queue with checksum generation off. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
Use of the net_device::priv field is deprecated. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 7月, 2008 2 次提交
-
-
由 Ben Hutchings 提交于
Using multiple cores in the same package to handle received traffic does not appear to provide a performance benefit. Therefore use CPU topology information to count CPU packages and use that as the default number of RX queues and interrupts. We rely on interrupt balancing to spread the interrupts across packages. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
This avoids deadlock in case a reset is triggered during self-test. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 15 7月, 2008 2 次提交
-
-
由 David S. Miller 提交于
Now that we have a specific lock to protect the network device unicast and multicast lists, remove extraneous grabs of the TX lock in cases where the code only needs address list protection. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Add netif_addr_{lock,unlock}{,_bh}() helpers. Use them to protect operations that operate on or read the network device unicast and multicast address lists. Also use them in cases where the code simply wants to block calls into the driver's ->set_rx_mode() and ->set_multicast_list() methods. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2008 1 次提交
-
-
由 Ben Hutchings 提交于
Remove our own implementation of I2C bit-banging. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 22 5月, 2008 2 次提交
-
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ben Hutchings 提交于
These comments have been revised in response to questions raised by Andrew Morton in <20080501120858.207b6dd6.akpm@linux-foundation.org>. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-