- 21 5月, 2009 31 次提交
-
-
由 Vinay Sridhar 提交于
Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Becky Bruce 提交于
Currently, the 32-bit code uses sg->length instead of sg->dma_lentgh to report sg_dma_len. However, since the default dma code for 32-bit (the dma_direct case) sets dma_length and length to the same thing, we should be able to use dma_length there as well. This gets rid of some 32-vs-64-bit ifdefs, and is needed by the swiotlb code which actually distinguishes between dma_length and length. Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jan Blunck 提交于
This patch removes an unnecessary double check if the dentry returned by lookup_create() is actually non-negative. Since lookup_create() itself returns an error in this case just remove the check. Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
I have been looking at sources of OS jitter and notice that after a long NO_HZ idle period we wakeup too early: relative time (us) event timer irq exit 999946.405 timer irq entry 4.835 timer irq exit 21.685 timer irq entry 3.540 timer (tick_sched_timer) entry Here we slept for just under a second then took a timer interrupt that did nothing. 21.685 us later we wake up again and do the work. We set a rather low shift value of 16 for the decrementer clockevent, which I think is causing this issue. On this box we have a 207MHz decrementer and see: clockevent: decrementer mult[3501] shift[16] cpu[0] For calculations of large intervals this mult/shift combination could be off by a significant amount. I notice the sparc code has a loop that iterates to find a mult/shift combination that maximises the shift value while keeping mult under 32bit. With the patch below we get: clockevent: decrementer mult[35015c20] shift[32] cpu[15] And we no longer see the spurious wakeups. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
The pcnet32 driver has had in its device id table for some time a match against the "broken" vendor ID. No need to fake out the vendor ID with an explicit fixup. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Removed building setup-irq on ppc32, we don't use it anymore * Remove duplicate prototype for setup_grackle() code that needs it gets it from <asm/grackle.h> * Removed gratuitous pci_io_size type differences between ppc32/ppc64 Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
There doesn't appear to be any specific reason that we need to setup the pseries specific notifier in generic arch pci code. Move it into pseries land. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node to just go get the pci_controller. We can call pci_bus_to_host() for this purpose. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node but call pci_bus_to_OF_node() for this purpose. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node but call pci_bus_to_OF_node() for this purpose. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
This adds the PowerPC 2.06 tlbie mnemonics and keeps backwards compatibilty for CPUs before 2.06. Only useful for bare metal systems. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
powerpc: Enable MMU feature sections for inline asm This adds the ability to do MMU feature sections for inline asm. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Cleans up the VSX load/store instructions by moving them into ppc-opcode.h. Signed-off-by: NMichael Neuling <mikey@neuling.org> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Make macros more braces happy. Signed-off-by: NMichael Neuling <mikey@neuling.org> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We believe if a toolchain supports PT_GNU_STACK that it sets the proper PHDR permissions. Therefor elf_read_implies_exec() should only be true if we don't see PT_GNU_STACK set. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
So select GENERIC_HARDIRQS_NO__DO_IRQ to disable it. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Don't call __do_IRQ() directly in gatwick_action(), use generic_handle_irq(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
We should no longer have any irq code that needs __do_IRQ(), so remove the fallback to __do_IRQ(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
The guts of do_IRQ() isn't really the right place to be documenting the ppc_md.get_irq() interface. So move the comment into machdep.h Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Makes do_IRQ() shorter and clearer. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Rather than a giant ifdef in the body of do_IRQ(), including a dangling else, move the irq stack logic into a separate routine and do the ifdef there. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
ps3 has 4 ipis per cpu and can use the new smp_request_message_ipi to reduce path length when receiving an ipi. This has the side effect of setting IRQF_PERCPU. Signed-off-by: NMilton Miller <miltonm@bga.com> Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Robert Jennings 提交于
Adds support for the "unused" page hint which can be used in shared memory partitions to flag pages not in use, which will then be stolen before active pages by the hypervisor when memory needs to be moved to LPARs in need of additional memory. Failure to mark pages as 'unused' makes the LPAR slower to give up unused memory to other partitions. This adds the kernel parameter 'cmo_free_hint' to disable this functionality. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tony Breeds 提交于
mpic_find() was overloaded to do two things, finding the mpic instance for a given interrupt and returning if it's an IPI. Instead we introduce mpic_is_ipi() and simplify mpic_find() to just return the mpic instance Also silences the warning: arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority': arch/powerpc/sysdev/mpic.c:1382: warning: 'is_ipi' may be used uninitialized in this function Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Acked-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Sean MacLennan 提交于
Now that leds-gpio is a proper OF platform driver, the Warp can use the leds-gpio driver rather than the old out-of-kernel driver. One side-effect is the leds-gpio driver always turns the leds off while the old driver left them alone. So we have to set them back to the correct settings. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 19 5月, 2009 9 次提交
-
-
由 Kumar Gala 提交于
Previouslly we just always set the inbound window to 2G. This was broken for systems with >2G. If a system has >=4G we will need SWIOTLB support to handle that case. We now allocate PCICSRBAR/PEXCSRBAR right below the lowest PCI outbound address for MMIO or the 4G boundary (if the lowest PCI address is above 4G). Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: NTed Peters <Ted.Peters@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Updated the binding spec to use "fsl,eshdc" as the base compatible rather than the first chip in the family. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Li Yang 提交于
Instead of fixed address in old code. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
We we build with resource_size_t as a 64-bit quantity we get: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_setup': arch/powerpc/sysdev/fsl_rio.c:1029: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' arch/powerpc/sysdev/fsl_rio.c:1029: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
In these configuration we expect to have large amounts of memory (> 4G) and thus will bounce via swiotlb some region of PCI address space. The outbound windows were wasting 512M of address space by leaving a gap between the top of the outbound window and the 4G boundary. By moving the top of the outbound window up to the 4G boundary we can reclaim the vast majority of the 512M (minus space needed for PEXCSRBAR) and thus reduces the amount of memory we have to bounce. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Its feasible based on how the PCI address map is setup that the region of PCI address space used for MSIs differs for each PHB on the same SoC. Instead of assuming that the address mappes to CCSRBAR 1:1 we read PEXCSRBAR (BAR0) for the PHB that the given pci_dev is on. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The MPC8568/9 chips support MSIs on PCIe so no reason not to enable them. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-