Just re-arrange the code a bit to make it easier to follow what is
going on.  Basically un-negating the if-statement and swapping the code
inside the if-statement with code outside.

No functional changes.
Originally-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-7-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In original NMI handler, NMI reason io port (0x61) is only processed
on BSP.  This makes it impossible to hot-remove BSP.  To solve the
issue, a raw spinlock is used to allow the port to be processed on any
CPU.
Originally-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-6-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With priorities in place and no one really understanding the difference between
DIE_NMI and DIE_NMI_IPI, just remove DIE_NMI_IPI and convert everyone to DIE_NMI.

This also simplifies default_do_nmi() a little bit.  Instead of calling the
die_notifier in both the if and else part, just pull it out and call it before
the if-statement.  This has the side benefit of avoiding a call to the ioport
to see if there is an external NMI sitting around until after the (more frequent)
internal NMIs are dealt with.
Patch-Inspired-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-5-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In order to consolidate the NMI die_chain events, we need to setup the priorities
for the die notifiers.

I started by defining a bunch of common priorities that can be used by the
notifier blocks.  Then I modified the notifier blocks to use the newly created
priorities.

Now that the priorities are straightened out, it should be easier to remove the
event DIE_NMI_IPI.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-4-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They are a handful of places in the code that register a die_notifier
as a catch all in case no claims the NMI.  Unfortunately, they trigger
on events like DIE_NMI and DIE_NMI_IPI, which depending on when they
registered may collide with other handlers that have the ability to
determine if the NMI is theirs or not.

The function unknown_nmi_error() makes one last effort to walk the
die_chain when no one else has claimed the NMI before spitting out
messages that the NMI is unknown.

This is a better spot for these devices to execute any code without
colliding with the other handlers.

The two drivers modified are only compiled on x86 arches I believe, so
they shouldn't be affected by other arches that may not have
DIE_NMIUNKNOWN defined.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: dann frazier <dannf@hp.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace the NMI related magic numbers with symbol constants.

Memory parity error is only valid for IBM PC-AT, newer machine use
bit 7 (0x80) of 0x61 port for PCI SERR. While memory error is usually
reported via MCE. So corresponding function name and kernel log string
is changed.

But on some machines, PCI SERR line is still used to report memory
errors. This is used by EDAC, so corresponding EDAC call is reserved.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1294348732-15030-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Adds perf_event_time() to try and centralize access to event
timing and in particular ctx->time. Prepares for cgroup support.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22059c.122ae30a.5e0e.ffff8b8b@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace all occurrences of:
	event->cpu != -1 && event->cpu == smp_processor_id()
by a call to:
	event_filter_match(event)

This makes the code more consistent and will make the cgroup
patch smaller.
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d220593.2308e30a.48c5.ffff8ae9@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In particular this patch move perf_event_exit_task() before
cgroup_exit() to allow for cgroup support. The cgroup_exit()
function detaches the cgroups attached to a task.

Other movements include hoisting some definitions and inlines
at the top of perf_event.c
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d22058b.cdace30a.4657.ffff95b1@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.

For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It seems that some gcc versions build by default with frame pointers
and some others omit them.

Just build the tools with frame pointers as the callchains can be an
important part of the perf workflow.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1294325513-14276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I found when specifying all tracepoints with -e to one of subcommand,
such as 'stat', the program will trigger a buffer overflow error, like
this:

*** buffer overflow detected ***: ./perf terminated
======= Backtrace: =========
/lib64/libc.so.6(__fortify_fail+0x37)[0x382cefb2c7]
....

The tracepoints are separated by comma, something like this:

$ perf stat -a -e `perf list |grep Tracepoint|awk -F'[' '{gsub(/[[:space:]]+/,"",$1);array[FNR]=$1}END{outputs=array[1];for (i=2;i<=FNR;i++){ outputs=outputs "," array[i];};print outputs}'`

The root reason of this problem is that store_event_type() is called for all
events, and will overflow the 'filename' at:

    strncat(filename, orgname, strlen(orgname));

This patch fixes it by calling store_event_type() only when the event name has
been found.

LKML-Reference: <20110106093922.GB6713@hpt.nay.redhat.com>
Signed-off-by: NHan Pingtian <phan@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Provides documentation for the following:
- the new power trace API,
- the old (legacy) power trace API,
- the DEPRECATED Kconfig option usage.
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: trenn@suse.de
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-3-git-send-email-j-pihet@ti.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Uses the machine_suspend trace point, called from the
generic kernel suspend_devices_and_enter function.
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Arjan van de Ven <arjan@linux.intel.com>
CC: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-pm@lists.linux-foundation.org
LKML-Reference: <1294253342-29056-2-git-send-email-j-pihet@ti.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Not accessed outside builtin-script, so make them static.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

That already does what was being done here. The warning is now unconditionally
given by __perf_session__process_pipe_events, just like for non pipe processing.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just like we do at __perf_session__process_events

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes the usage of the perf_event.h header file
between command modules and the supporting code in util.

It is necessary to ensure that ALL files use the SAME
perf_event.h header from the kernel source tree.

There were a couple of #include <linux/perf_event.h> mixed
with #include "../../perf_event.h".

This caused issues on some distros because of mismatch
in the layout of struct perf_event_attr. That eventually
led perf stat to segfault.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4d233cf0.2308e30a.7b00.ffffc187@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Rebooted my devel machine, first thing I ran was perf test, that expects
debugfs to be mounted, test fails. Be more clear about it.

Also add missing newlines and add more informative message when
sys_perf_event_open fails.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Prevent the long delay in io_check_error making NMI watchdog
timeout.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-3-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The spin_lock_debug/rcu_cpu_stall detector uses
trigger_all_cpu_backtrace() to dump cpu backtrace.
Therefore it is possible that trigger_all_cpu_backtrace()
could be called at the same time on different CPUs, which
triggers and 'unknown reason NMI' warning. The following case
illustrates the problem:

      CPU1                    CPU2                     ...   CPU N
                       trigger_all_cpu_backtrace()
                       set "backtrace_mask" to cpu mask
                               |
generate NMI interrupts  generate NMI interrupts       ...
    \                          |                               /
     \                         |                              /

The "backtrace_mask" will be cleaned by the first NMI interrupt
at nmi_watchdog_tick(), then the following NMI interrupts
generated by other cpus's arch_trigger_all_cpu_backtrace() will
be taken as unknown reason NMI interrupts.

This patch uses a test_and_set to avoid the problem, and stop
the arch_trigger_all_cpu_backtrace() from calling to avoid
dumping a double cpu backtrace info when there is already a
trigger_all_cpu_backtrace() in progress.
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: NBruce Ashfield <bruce.ashfield@windriver.com>
Cc: fweisbec@gmail.com
LKML-Reference: <1294198689-15447-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDon Zickus <dzickus@redhat.com>

There are some paths that walk the die_chain with preemption on.
Make sure we are in an NMI call before we start doing anything.

This was triggered by do_general_protection calling notify_die
with DIE_GPF.
Reported-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
LKML-Reference: <1294198689-15447-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: Add the final .37 tree.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ipv4/route.c: respect prefsrc for local routes
  bridge: stp: ensure mac header is set
  bridge: fix br_multicast_ipv6_rcv for paged skbs
  atl1: fix oops when changing tx/rx ring params
  drivers/atm/atmtcp.c: add missing atm_dev_put
  starfire: Fix dma_addr_t size test for MIPS
  tg3: fix return value check in tg3_read_vpd()
  Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings()
  ISDN, Gigaset: Fix memory leak in do_disconnect_req()
  CAN: Use inode instead of kernel address for /proc file
  skfp: testing the wrong variable in skfp_driver_init()
  ppp: allow disabling multilink protocol ID compression
  ehea: Avoid changing vlan flags
  ueagle-atm: fix PHY signal initialization race

The preferred source address is currently ignored for local routes,
which results in all local connections having a src address that is the
same as the local dst address. Fix this by respecting the preferred source
address when it is provided for local routes.

This bug can be demonstrated as follows:

 # ifconfig dummy0 192.168.0.1
 # ip route show table local | grep local.*dummy0
 local 192.168.0.1 dev dummy0  proto kernel  scope host  src 192.168.0.1
 # ip route change table local local 192.168.0.1 dev dummy0 \
     proto kernel scope host src 127.0.0.1
 # ip route show table local | grep local.*dummy0
 local 192.168.0.1 dev dummy0  proto kernel  scope host  src 127.0.0.1

We now establish a local connection and verify the source IP
address selection:

 # nc -l 192.168.0.1 3128 &
 # nc 192.168.0.1 3128 &
 # netstat -ant | grep 192.168.0.1:3128.*EST
 tcp        0      0 192.168.0.1:3128        192.168.0.1:33228 ESTABLISHED
 tcp        0      0 192.168.0.1:33228       192.168.0.1:3128  ESTABLISHED
Signed-off-by: NJoel Sing <jsing@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ->trim_fs has been removed meanwhile, so remove it from the documentation
as well.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

builtin-timechart must only pass -e power:xy events if they are supported by
the running kernel, otherwise try to fetch the old power:power{start,end}
events.

For this I added the tiny helper function:

   int is_valid_tracepoint(const char *event_string)

to parse-events.[hc], which could be more generic as an interface and support
hardware/software/... events, not only tracepoints, but someone else could
extend that if needed...
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NJean Pihet <j-pihet@ti.com>
LKML-Reference: <1294073445-14812-4-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add these new power trace events:

 power:cpu_idle
 power:cpu_frequency
 power:machine_suspend

The old C-state/idle accounting events:
  power:power_start
  power:power_end

Have now a replacement (but we are still keeping the old
tracepoints for compatibility):

  power:cpu_idle

and
  power:power_frequency

is replaced with:
  power:cpu_frequency

power:machine_suspend is newly introduced.

Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.

the type= field got removed from both, it was never
used and the type is differed by the event type itself.

perf timechart userspace tool gets adjusted in a separate patch.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NJean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>

power_frequency moved to drivers/cpufreq/cpufreq.c which has
to be compiled in, no need to export it.

intel_idle can a be module though...
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJean Pihet <jean.pihet@newoldbits.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>

Merge branch 'perf/test' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

Merge reason: pick up latest -rc.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

To test the use of the perf_evsel class on something other than
the tools from where we refactored code to create it.

It calls open() N times and then checks if the event created to
monitor it returns N events.

[acme@felicio linux]$ perf test
 1: vmlinux symtab matches kallsyms: Ok
 2: detect open syscall event: Ok
[acme@felicio linux]$

It does.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While writing the first user of the routines created from the ad-hoc
routines in the existing builtins I noticed that the resulting set of
calls was too long, reduce it by doing some best effort allocations.

Tools that need to operate on multiple threads and cpus should pre-allocate
enough resources by explicitely calling the perf_evsel__alloc_{fd,counters}
methods.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that later, we can pass the thread_map instance instead of
(thread_num, thread_map) for things like perf_evsel__open and friends,
just like was done with cpu_map.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that later, we can pass the cpu_map instance instead of (nr_cpus, cpu_map)
for things like perf_evsel__open and friends.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Abstracting away the loops needed to create the various event fd handlers.

The users have to pass a confiruged perf->evsel.attr field, which is already
usable after perf_evsel__new (constructor) time, using defaults.

Comes out of the ad-hoc routines in builtin-stat, that now uses it.

Fixed a small silly bug where we were die()ing before killing our
children, dysfunctional family this one 8-)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Making them hopefully generic enough to be used in 'perf test',
well see.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pxa: fix page table corruption on resume
  ARM: it8152: add IT8152_LAST_IRQ definition to fix build error
  ARM: pxa: PXA_ESERIES depends on FB_W100.
  ARM: 6605/1: Add missing include "asm/memory.h"
  ARM: 6540/1: Stop irqsoff trace on return to user
  ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers
  ARM: 6536/1: Add missing SZ_{32,64,128}
  ARM: fix cache-feroceon-l2 after stack based kmap_atomic()
  ARM: fix cache-xsc3l2 after stack based kmap_atomic()
  ARM: get rid of kmap_high_l1_vipt()
  ARM: smp: avoid incrementing mm_users on CPU startup
  ARM: pxa: PXA_ESERIES depends on FB_W100.