- 26 5月, 2012 2 次提交
-
-
由 Jan Schmidt 提交于
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
由 Jan Schmidt 提交于
Three callers of btrfs_free_tree_block or btrfs_alloc_tree_block passed parameter for_cow = 1. In fact, these two functions should never mark their tree modification operations as for_cow, because they can change the number of blocks referenced by a tree. Hence, we remove the extra for_cow parameter from these functions and make them pass a zero down. Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
-
- 06 5月, 2012 1 次提交
-
-
由 Chris Mason 提交于
verify_parent_transid needs to lock the extent range to make sure no IO is underway, and so it can safely clear the uptodate bits if our checks fail. But, a few callers are using it with spinlocks held. Most of the time, the generation numbers are going to match, and we don't want to switch to a blocking lock just for the error case. This adds an atomic flag to verify_parent_transid, and changes it to return EAGAIN if it needs to block to properly verifiy things. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 19 4月, 2012 2 次提交
-
-
由 Josef Bacik 提交于
A user reported a panic where we were trying to fix a bad mirror but the mirror number we were giving was 0, which is invalid. This is because we don't do the transid verification until after the read, so as far as the read code is concerned the read was a success. So instead store the mirror we read from so that if there is some failure post read we know which mirror to try next and which mirror needs to be fixed if we find a good copy of the block. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Liu Bo 提交于
Our code is not ready to cope with a sectorsize that's not equal to PAGE_SIZE. It will lead to hanging-on while writing something. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
-
- 30 3月, 2012 1 次提交
-
-
由 Chris Mason 提交于
Dave Sterba had put in patches to look for mixed data/metadata groups with metadata bigger than 4KB. But these ended up in the wrong place and it wasn't testing the feature flag correctly. This updates the tests to make sure our sizes are matching Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 3月, 2012 3 次提交
-
-
由 Chris Mason 提交于
Btrfs puts the filesystem metadata into its own address space, and somehow the block device address space isn't getting onto disk properly before a mount. The end result is that a loop of mkfs and mounting the filesystem will sometimes find stale or incorrect data. This commit should fix it by sprinkling fdatawrites and invalidate_bdev calls around. This is a short term measure to make sure it is fixed. The block devices really should be flushed and cleaned up higher in the stack. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 David Sterba 提交于
With support for bigger metadata blocks, we must avoid mounting a filesystem with different block size for mixed block groups, this causes corruption (found by xfstests/083). Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
由 David Sterba 提交于
Validate checksum algorithm during mount and prevent BUG_ON later in btrfs_super_csum_size. Signed-off-by: NDavid Sterba <dsterba@suse.cz>
-
- 27 3月, 2012 6 次提交
-
-
由 Josef Bacik 提交于
Since we need to read and write extent buffers in their entirety we can't use the normal bio_readpage_error stuff since it only works on a per page basis. So instead make it so that if we see an io error in endio we just mark the eb as having an IO error and then in btree_read_extent_buffer_pages we will manually try other mirrors and then overwrite the bad mirror if we find a good copy. This works with larger than page size blocks. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The metadata write IO completion code is now simple enough that we don't need the threaded helpers anymore. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
This patch simplifies how we track our extent buffers. Previously we could exit writepages with only having written half of an extent buffer, which meant we had to track the state of the pages and the state of the extent buffers differently. Now we only read in entire extent buffers and write out entire extent buffers, this allows us to simply set bits in our bflags to indicate the state of the eb and we no longer have to do things like track uptodate with our iotree. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Because btrfs cow's we can end up with extent buffers that are no longer necessary just sitting around in memory. So instead of evicting these pages, we could end up evicting things we actually care about. Thus we have free_extent_buffer_stale for use when we are freeing tree blocks. This will make it so that the ref for the eb being in the radix tree is dropped as soon as possible and then is freed when the refcount hits 0 instead of waiting to be released by releasepage. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
We spend a lot of time looking up extent buffers from pages when we could just store the pointer to the eb the page is associated with in page->private. This patch does just that, and it makes things a little simpler and reduces a bit of CPU overhead involved with doing metadata IO. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Chris Mason 提交于
A few years ago the btrfs code to support blocks lager than the page size was disabled to fix a few corner cases in the page cache handling. This fixes the code to properly support large metadata blocks again. Since current kernels will crash early and often with larger metadata blocks, this adds an incompat bit so that older kernels can't mount it. This also does away with different blocksizes for nodes and leaves. You get a single block size for all tree blocks. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 22 3月, 2012 8 次提交
-
-
由 Jan Kara 提交于
When a filesystem got aborted due do error, transaction_kthread() will busyloop. Fix it by going to sleep in that case as well. Maybe we should just stop transaction_kthread() when filesystem is aborted but that would be more complex. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jeff Mahoney 提交于
btrfs currently handles most errors with BUG_ON. This patch is a work-in- progress but aims to handle most errors other than internal logic errors and ENOMEM more gracefully. This iteration prevents most crashes but can run into lockups with the page lock on occasion when the timing "works out." Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
由 Jeff Mahoney 提交于
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
由 Jeff Mahoney 提交于
lock_extent and unlock_extent are always called with GFP_NOFS, drop the argument and use GFP_NOFS consistently. Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
由 Jeff Mahoney 提交于
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
由 Jeff Mahoney 提交于
This pushes failures from the submit_bio_hook callbacks, btrfs_submit_bio_hook and btree_submit_bio_hook into the callers, including callers of submit_one_bio where it catches the failures with BUG_ON. It also pushes up through the ->readpage_io_failed_hook to end_bio_extent_writepage where the error is already caught with BUG_ON. Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
由 Jeff Mahoney 提交于
find_and_setup_root BUGs when it encounters an error from btrfs_find_last_root, which can occur if a path can't be allocated. This patch pushes it up to its callers where it is already handled. Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
由 Jeff Mahoney 提交于
The only error condition in clean_tree_block is an accounting bug. Returning without modifying dirty_metadata_bytes and as if the cleaning as been performed may cause problems later so it should panic instead. It should probably be a BUG_ON but we have btrfs_panic now. Signed-off-by: NJeff Mahoney <jeffm@suse.com>
-
- 23 2月, 2012 1 次提交
-
-
由 Chris Mason 提交于
When we are setting up the mount, we close all the devices that were not actually part of the metadata we found. But, we don't make sure that one of those devices wasn't fs_devices->latest_bdev, which means we can do a use after free on the one we closed. This updates latest_bdev as it goes. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 15 2月, 2012 1 次提交
-
-
由 Keith Mannthey 提交于
Gracefully fail when trying to mount a BTRFS file system that has a sectorsize smaller than PAGE_SIZE. On PPC it is possible to build a FS while using a 4k PAGE_SIZE kernel then boot into a 64K PAGE_SIZE kernel. Presently open_ctree fails in an endless loop and hangs the machine in this situation. My debugging has show this Sector size < Page size to be a non trivial situation and a graceful exit from the situation would be nice for the time being. Signed-off-by: NKeith Mannthey <kmannth@us.ibm.com>
-
- 27 1月, 2012 1 次提交
-
-
由 David Sterba 提交于
btree_releasepage is a callback and can be passed unknown gfp flags and then they may end up in kmem_cache_alloc called from alloc_extent_state, slab allocator will BUG_ON when there is HIGHMEM or DMA32 flag set. This may happen when btrfs is mounted from a loop device, which masks out __GFP_IO flag. The check in try_release_extent_state 3399 if ((mask & GFP_NOFS) == GFP_NOFS) 3400 mask = GFP_NOFS; will not work and passes unfiltered flags further resulting in crash at mm/slab.c:2963 [<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8 [<000000000024c810>] kmem_cache_alloc+0x204/0x294 [<00000000001fd3c2>] mempool_alloc+0x52/0x170 [<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs] [<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs] [<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs] [<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs] [<0000000000210d84>] shrink_page_list+0x6a0/0x724 [<0000000000211394>] shrink_inactive_list+0x230/0x578 [<0000000000211bb8>] shrink_list+0x6c/0x120 [<0000000000211e4e>] shrink_zone+0x1e2/0x228 [<0000000000211f24>] shrink_zones+0x90/0x254 [<0000000000213410>] do_try_to_free_pages+0xac/0x420 [<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0 [<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8 [<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8 Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 17 1月, 2012 5 次提交
-
-
由 Ilya Dryomov 提交于
Implement an ioctl for canceling restriper. Currently we wait until relocation of the current block group is finished, in future this can be done by triggering a commit. Balance item is deleted and no memory about the interrupted balance is kept. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Implement an ioctl for pausing restriper. This pauses the relocation, but balance is still considered to be "in progress": balance item is not deleted, other volume operations cannot be started, etc. If paused in the middle of profile changing operation we will continue making allocations with the target profile. Add a hook to close_ctree() to pause restriper and free its data structures on unmount. (It's safe to unmount when restriper is in "paused" state, we will resume with the same parameters on the next mount) Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
On mount, if balance item is found, resume balance in a separate kernel thread. Try to be smart to continue roughly where previous balance (or convert) was interrupted. For chunk types that were being converted to some profile we turn on soft convert, in case of a simple balance we turn on usage filter and relocate only less-than-90%-full chunks of that type. These are just heuristics but they help quite a bit, and can be improved in future. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
Add basic restriper infrastructure: extended balancing ioctl and all related ioctl data structures, add data structure for tracking restriper's state to fs_info, etc. The semantics of the old balancing ioctl are fully preserved. Explicitly disallow any volume operations when balance is in progress. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
由 Ilya Dryomov 提交于
{data,metadata,system}_alloc_profile fields have been unused for a long time now. Get rid of them. Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
-
- 13 1月, 2012 2 次提交
-
-
由 Mel Gorman 提交于
This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT mode that avoids writing back pages to backing storage. Async compaction maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT. For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is used. This avoids sync compaction stalling for an excessive length of time, particularly when copying files to a USB stick where there might be a large number of dirty pages backed by a filesystem that does not support ->writepages. [aarcange@redhat.com: This patch is heavily based on Andrea's work] [akpm@linux-foundation.org: fix fs/nfs/write.c build] [akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build] Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
Asynchronous compaction is used when allocating transparent hugepages to avoid blocking for long periods of time. Due to reports of stalling, there was a debate on disabling synchronous compaction but this severely impacted allocation success rates. Part of the reason was that many dirty pages are skipped in asynchronous compaction by the following check; if (PageDirty(page) && !sync && mapping->a_ops->migratepage != migrate_page) rc = -EBUSY; This skips over all mapping aops using buffer_migrate_page() even though it is possible to migrate some of these pages without blocking. This patch updates the ->migratepage callback with a "sync" parameter. It is the responsibility of the callback to fail gracefully if migration would block. Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 1月, 2012 1 次提交
-
-
由 Li Zefan 提交于
The correct lock order is uuid_mutex -> volume_mutex -> chunk_mutex, but when we mount a filesystem which has backing seed devices, we have this lock chain: open_ctree() lock(chunk_mutex); read_chunk_tree(); read_one_dev(); open_seed_devices(); lock(uuid_mutex); and then we hit a lockdep splat. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
- 09 1月, 2012 6 次提交
-
-
由 Al Viro 提交于
now that we don't need it for sget() anymore... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
the latter can be obtained from the former (by looking as ->tree_root) just as cheaply as we currently are doing the other way round. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... all the way up into btrfs_mount(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
It returns either ERR_PTR(-ve) or sb->s_fs_info. The latter can be found by caller just as well, TYVM, no need to return it. Just return -ve or 0... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
close_ctree() uses a weird mix of accesses to root->fs_info and its value at the beginning of function stored in local variable. Since ->fs_info *never* changes, let's just use the local variable to avoid confusion. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
A new helper: btrfs_alloc_root(fs_info); allocates btrfs_root and sets ->fs_info. All places allocating the suckers converted to it. At that point we *never* reassign ->fs_info of btrfs_root; it's set before anyone sees the address of newly allocated struct btrfs_root and never assigned anywhere else. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-