This patch fixes the following deadlock bug during the recovery.

INFO: task mount:1322 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount           D ffffffff81125870     0  1322   1266 0x00000000
 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046
 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8
 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520
Call Trace:
[<ffffffff81125870>] ? __lock_page+0x70/0x70
[<ffffffff816a92d9>] schedule+0x29/0x70
[<ffffffff816a93af>] io_schedule+0x8f/0xd0
[<ffffffff8112587e>] sleep_on_page+0xe/0x20
[<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0
[<ffffffff81125867>] __lock_page+0x67/0x70
[<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40
[<ffffffff81126857>] find_lock_page+0x67/0x80
[<ffffffff8112698f>] find_or_create_page+0x3f/0xb0
[<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs]
[<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs]
[<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs]
[<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40
[<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs]
[<ffffffff81184cf9>] mount_bdev+0x1c9/0x210
[<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs]
[<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs]
[<ffffffff81185a13>] mount_fs+0x43/0x1b0
[<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20
[<ffffffff811a0796>] vfs_kern_mount+0x76/0x120
[<ffffffff811a2cb7>] do_mount+0x237/0xa10
[<ffffffff81140b9b>] ? strndup_user+0x5b/0x80
[<ffffffff811a3520>] SyS_mount+0x90/0xe0
[<ffffffff816b3502>] system_call_fastpath+0x16/0x1b

The bug is triggered when check_index_in_prev_nodes tries to get the direct
node page by calling get_node_page.
At this point, if the direct node page is already locked by get_dnode_of_data,
its caller, we got a deadlock condition.

This patch adds additional condition check for the reuse of locked direct node
pages prior to the get_node_page call.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce a simple macro function for readability.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Majianpeng reported a lockdep splat for f2fs. It turns out mutex_lock_all()
acquires an array of locks (in global/local lock style).

Any such operation is always serialized using cp_mutex, therefore there is no
fs_lock[] lock-order issue; tell lockdep about this using the
mutex_lock_nest_lock() primitive.
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

I found a bug when testing power-off-recovery as follows.

[Bug Scenario]
1. create a file
2. fsync the file
3. reboot w/o any sync
4. try to recover the file
 - found its fsync mark
 - found its dentry mark
   : try to recover its dentry
    - get its file name
    - get its parent inode number
     : here we got zero value

The reason why we get the wrong parent inode number is that we didn't
synchronize the inode page with its newly created inode information perfectly.

Especially, previous f2fs stores fi->i_pino and writes it to the cached
node page in a wrong order, which incurs the zero-valued i_pino during the
recovery.

So, this patch modifies the creation flow to fix the synchronization order of
inode page with its inode.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch is for passing a locked node page to get_dnode_of_data.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

During the dentry recovery routine, recover_inode() triggers __f2fs_add_link
with its directory inode.

In the following scenario, a bug is captured.
 1. dir = f2fs_iget(pino)
 2. __f2fs_add_link(dir, name)
 3. iput(dir)
  -> f2fs_evict_inode() faces with BUG_ON(atomic_read(fi->dirty_dents))

Kernel BUG at ffffffffa01c0676 [verbose debug info unavailable]
[<ffffffffa01c0676>] f2fs_evict_inode+0x276/0x300 [f2fs]
Call Trace:
 [<ffffffff8118ea00>] evict+0xb0/0x1b0
 [<ffffffff8118f1c5>] iput+0x105/0x190
 [<ffffffffa01d2dac>] recover_fsync_data+0x3bc/0x1070 [f2fs]
 [<ffffffff81692e8a>] ? io_schedule+0xaa/0xd0
 [<ffffffff81690acb>] ? __wait_on_bit_lock+0x7b/0xc0
 [<ffffffff8111a0e7>] ? __lock_page+0x67/0x70
 [<ffffffff81165e21>] ? kmem_cache_alloc+0x31/0x140
 [<ffffffff8118a502>] ? __d_instantiate+0x92/0xf0
 [<ffffffff812a949b>] ? security_d_instantiate+0x1b/0x30
 [<ffffffff8118a5b4>] ? d_instantiate+0x54/0x70

This means that we should flush all the dentry pages between iget and iput().
But, during the recovery routine, it is unallowed due to consistency, so we
have to wait the whole recovery process.
And then, write_checkpoint flushes all the dirty dentry blocks, and nicely we
can put the stale dir inodes from the dirty_dir_inode_list.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In order to avoid build_free_nid lock contention, let's change the order of
function calls as follows.

At first, check whether there is enough free nids.
 - If available, just get a free nid with spin_lock without any overhead.
 - Otherwise, conduct build_free_nids.
  : scan nat pages, journal nat entries, and nat cache entries.

We should consider carefullly not to serve free nids intermediately made by
build_free_nids.
We can get stable free nids only after build_free_nids is done.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, background GC submits many 4KB read requests to load victim blocks
and/or its (i)node blocks.

...
f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb61, blkaddr = 0x3b964ed
f2fs_gc : block_rq_complete: 8,16 R () 499854968 + 8 [0]
f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb6f, blkaddr = 0x3b964ee
f2fs_gc : block_rq_complete: 8,16 R () 499854976 + 8 [0]
f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb79, blkaddr = 0x3b964ef
f2fs_gc : block_rq_complete: 8,16 R () 499854984 + 8 [0]
...

However, by the fact that many IOs are sequential, we can give a chance to merge
the IOs by IO scheduler.
In order to do that, let's use blk_plug.

...
f2fs_gc : f2fs_iget: ino = 143
f2fs_gc : f2fs_readpage: ino = 143, page_index = 0x1c6, blkaddr = 0x2e6ee
f2fs_gc : f2fs_iget: ino = 143
f2fs_gc : f2fs_readpage: ino = 143, page_index = 0x1c7, blkaddr = 0x2e6ef
<idle> : block_rq_complete: 8,16 R () 1519616 + 8 [0]
<idle> : block_rq_complete: 8,16 R () 1519848 + 8 [0]
<idle> : block_rq_complete: 8,16 R () 1520432 + 96 [0]
<idle> : block_rq_complete: 8,16 R () 1520536 + 104 [0]
<idle> : block_rq_complete: 8,16 R () 1521008 + 112 [0]
<idle> : block_rq_complete: 8,16 R () 1521440 + 152 [0]
<idle> : block_rq_complete: 8,16 R () 1521688 + 144 [0]
<idle> : block_rq_complete: 8,16 R () 1522128 + 192 [0]
<idle> : block_rq_complete: 8,16 R () 1523256 + 328 [0]
...

Note that this issue should be addressed in checkpoint, and some readahead
flows too.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In the previous version, f2fs uses global locks according to the usage types,
such as directory operations, block allocation, block write, and so on.

Reference the following lock types in f2fs.h.
enum lock_type {
	RENAME,		/* for renaming operations */
	DENTRY_OPS,	/* for directory operations */
	DATA_WRITE,	/* for data write */
	DATA_NEW,	/* for data allocation */
	DATA_TRUNC,	/* for data truncate */
	NODE_NEW,	/* for node allocation */
	NODE_TRUNC,	/* for node truncate */
	NODE_WRITE,	/* for node write */
	NR_LOCK_TYPE,
};

In that case, we lose the performance under the multi-threading environment,
since every types of operations must be conducted one at a time.

In order to address the problem, let's share the locks globally with a mutex
array regardless of any types.
So, let users grab a mutex and perform their jobs in parallel as much as
possbile.

For this, I propose a new global lock scheme as follows.

0. Data structure
 - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS]
 - f2fs_sb_info -> node_write

1. mutex_lock_op(sbi)
 - try to get an avaiable lock from the array.
 - returns the index of the gottern lock variable.

2. mutex_unlock_op(sbi, index of the lock)
 - unlock the given index of the lock.

3. mutex_lock_all(sbi)
 - grab all the locks in the array before the checkpoint.

4. mutex_unlock_all(sbi)
 - release all the locks in the array after checkpoint.

5. block_operations()
 - call mutex_lock_all()
 - sync_dirty_dir_inodes()
 - grab node_write
 - sync_node_pages()

Note that,
 the pairs of mutex_lock_op()/mutex_unlock_op() and
 mutex_lock_all()/mutex_unlock_all() should be used together.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes a bitmap for victim segments selected by foreground GC, and
modifies the other bitmap for victim segments selected by background GC.

1) foreground GC bitmap
 : We don't need to manage this, since we just only one previous victim section
   number instead of the whole victim history.
   The f2fs uses the victim section number in order not to allocate currently
   GC'ed section to current active logs.

2) background GC bitmap
 : This bitmap is used to avoid selecting victims repeatedly by background GCs.
   In addition, the victims are able to be selected by foreground GCs, since
   there is no need to read victim blocks during foreground GCs.

   By the fact that the foreground GC reclaims segments in a section unit, it'd
   be better to manage this bitmap based on the section granularity.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When we recover fsync'ed data after power-off-recovery, we should guarantee
that any parent inode number should be correct for each direct inode blocks.

So, let's make the following rules.

- The fsync should do checkpoint to all the inodes that were experienced hard
links.

- So, the only normal files can be recovered by roll-forward.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes data_version check flow during the fsync call.
The original purpose for the use of data_version was to avoid writng inode
pages redundantly by the fsync calls repeatedly.
However, when user can modify file meta and then call fsync, we should not
skip fsync procedure.
So, let's remove this condition check and hope that user triggers in right
manner.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We should handle errors during the recovery flow correctly.
For example, if we get -ENOMEM, we should report a mount failure instead of
conducting the remained mount procedure.
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Correct spelling typo in comments
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In function check_nid_range, there is no need to trigger BUG_ON and make kernel stop.
Instead it could just check and indicate the inode number to be EINVAL.
Update the return path in do_read_inode to use the return from check_nid_range.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
[Jaegeuk: replace BUG_ON with WARN_ON]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Correct spelling typo in comments
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Previously, f2fs reads several node pages ahead when get_dnode_of_data is called
with RDONLY_NODE flag.
And, this flag is set by the following functions.
- get_data_block_ro
- get_lock_data_page
- do_write_data_page
- truncate_blocks
- truncate_hole

However, this readahead mechanism is initially introduced for the use of
get_data_block_ro to enhance the sequential read performance.

So, let's clarify all the cases with the additional modes as follows.

enum {
	ALLOC_NODE,	/* allocate a new node page if needed */
	LOOKUP_NODE,	/* look up a node without readahead */
	LOOKUP_NODE_RA,	/*
			 * look up a node with readahead called
			 * by get_datablock_ro.
			 */
}
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>

adding compat_ioctl to provide support for backward comptability - 32bit binary
execution on 64bit kernel.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch makes clearer the ambiguous f2fs_gc flow as follows.

1. Remove intermediate checkpoint condition during f2fs_gc
 (i.e., should_do_checkpoint() and GC_BLOCKED)

2. Remove unnecessary return values of f2fs_gc because of #1.
 (i.e., GC_NODE, GC_OK, etc)

3. Simplify write_checkpoint() because of #2.

4. Clarify the main f2fs_gc flow.
 o monitor how many freed sections during one iteration of do_garbage_collect().
 o do GC more without checkpoints if we can't get enough free sections.
 o do checkpoint once we've got enough free sections through forground GCs.

5. Adopt thread-logging (Slack-Space-Recycle) scheme more aggressively on data
  log types. See. get_ssr_segement()
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce accessor to get the sections based upon the block type
(node,dents...) and modify the functions : should_do_checkpoint,
has_not_enough_free_secs to use this accessor function to get
the node sections and dent sections.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

1. Background

Previously, if f2fs tries to move data blocks of an *evicting* inode during the
cleaning process, it stops the process incompletely and then restarts the whole
process, since it needs a locked inode to grab victim data pages in its address
space. In order to get a locked inode, iget_locked() by f2fs_iget() is normally
used, but, it waits if the inode is on freeing.

So, here is a deadlock scenario.
1. f2fs_evict_inode()       <- inode "A"
  2. f2fs_balance_fs()
    3. f2fs_gc()
      4. gc_data_segment()
        5. f2fs_iget()      <- inode "A" too!

If step #1 and #5 treat a same inode "A", step #5 would fall into deadlock since
the inode "A" is on freeing. In order to resolve this, f2fs_iget_nowait() which
skips __wait_on_freeing_inode() was introduced in step #5, and stops f2fs_gc()
to complete f2fs_evict_inode().

1. f2fs_evict_inode()           <- inode "A"
  2. f2fs_balance_fs()
    3. f2fs_gc()
      4. gc_data_segment()
        5. f2fs_iget_nowait()   <- inode "A", then stop f2fs_gc() w/ -ENOENT

2. Problem and Solution

In the above scenario, however, f2fs cannot finish f2fs_evict_inode() only if:
 o there are not enough free sections, and
 o f2fs_gc() tries to move data blocks of the *evicting* inode repeatedly.

So, the final solution is to use f2fs_iget() and remove f2fs_balance_fs() in
f2fs_evict_inode().
The f2fs_evict_inode() actually truncates all the data and node blocks, which
means that it doesn't produce any dirty node pages accordingly.
So, we don't need to do f2fs_balance_fs() in practical.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

In f2fs_inode_info structure, the description for data_version
has a typo mistake. It should be latest instead of lastes.
So, correcting that.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch enhances the checkpoint routine to cope with IO errors.

Basically f2fs detects IO errors from end_io_write, and the errors are able to
be occurred during one of data, node, and meta page writes.

In the previous code, when an IO error is occurred during writes, f2fs sets a
flag, CP_ERROR_FLAG, in the raw ckeckpoint buffer which will be written to disk.
Afterwards, write_checkpoint() will check the flag and remount f2fs as a
read-only (ro) mode.

However, even once f2fs is remounted as a ro mode, dirty checkpoint pages are
freely able to be written to disk by flusher or kswapd in background.
In such a case, after cold reboot, f2fs would restore the checkpoint data having
CP_ERROR_FLAG, resulting in disabling write_checkpoint and remounting f2fs as
a ro mode again.

Therefore, let's prevent any checkpoint page (meta) writes once an IO error is
occurred, and remount f2fs as a ro mode right away at that moment.
Reported-by: NOliver Winker <oliver@oli1170.net>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>

those should never be used for a lot of reasons...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

for one thing, it doesn't (and shouldn't) use anything else from dentry;
for another, on some call chains the dentry is fake and should
be eliminated completely.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add __init to functions in init_f2fs_fs for code consistency.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

As the "status" debugfs entry will be maintained for entire F2FS filesystem
irrespective of the number of partitions.
So, we can move the initialization to the init part of the f2fs and destroy will
be done from exit part. After making changes, for individual partition mount -
entry creation code will not be executed.
Signed-off-by: NJianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

I'd like to revisit the f2fs_gc flow and rewrite as follows.

1. In practical, the nGC parameter of f2fs_gc is meaningless. So, let's
  remove it.
2. Background GC marks victim blocks as dirty one at a time.
3. Foreground GC should do cleaning job until acquiring enough free
  sections. Afterwards, it needs to do checkpoint.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch resolves Coverity #753112.

In practical, the existing code flow does not fall into the reported errorneous
path. But, anyway, let's avoid this for future.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduced f2fs_msg function to differentiate f2fs specific messages in
the log. And, added few informative prints in the mount path, to convey
proper error in case of mount failure.
Signed-off-by: NNamjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: NAmit Sahrawat <a.sahrawat@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch is intended to unify string length declarations and usage.
There are number of calls to strlen which return size_t object.
The size of this object depends on compiler if it will be bigger,
equal or even smaller than an unsigned int
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, f2fs didn't track the parent inode number correctly which is stored
in each f2fs_inode. In the case of the following scenario, a bug can be occured.

Let's suppose there are one directory, "/b", and two files, "/a" and "/b/a".
 - pino of "/a" is ROOT_INO.
 - pino of "/b/a" is DIR_B_INO.

Then,
 # sync
  : The inode pages of "/a" and "/b/a" contain the parent inode numbers as
    ROOT_INO and DIR_B_INO respectively.
 # mv /a /b/a
  : The parent inode number of "/a" should be changed to DIR_B_INO, but f2fs
    didn't do that. Ref. f2fs_set_link().

In order to fix this clearly, I added i_pino in f2fs_inode_info, and whenever
it needs to be changed like in f2fs_add_link() and f2fs_set_link(), it is
updated temporarily in f2fs_inode_info.

And later, f2fs_write_inode() stores the latest information to the inode pages.
For power-off-recovery, f2fs_sync_file() triggers simply f2fs_write_inode().
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Do cleanup more for better code readability.

- Change the parameter set of f2fs_bio_alloc()
  This function should allocate a bio only since it is not something like
  f2fs_bio_init(). Instead, the caller should initialize the allocated bio.

- Introduce SECTOR_FROM_BLOCK
  This macro translates a block address to its sector address.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Reviewed-by: NNamjae Jeon <namjae.jeon@samsung.com>

As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment
blocks. Instead, just use "/*".
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch should resolve the bugs reported by the sparse tool.
Initial reports were written by "kbuild test robot" managed by fengguang.wu.

In my local machines, I've tested also by running:
> make C=2 CF="-D__CHECK_ENDIAN__"

Accordingly, I've found lots of warnings and bugs related to the endian
conversion. And I've fixed all at this moment.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Including <linux/version.h> is not necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>

This adds the following major in-memory structures in f2fs.

- f2fs_sb_info:
  contains f2fs-specific information, two special inode pointers for node and
  meta address spaces, and orphan inode management.

- f2fs_inode_info:
  contains vfs_inode and other fs-specific information.

- f2fs_nm_info:
  contains node manager information such as NAT entry cache, free nid list,
  and NAT page management.

- f2fs_node_info:
  represents a node as node id, inode number, block address, and its version.

- f2fs_sm_info:
  contains segment manager information such as SIT entry cache, free segment
  map, current active logs, dirty segment management, and segment utilization.
  The specific structures are sit_info, free_segmap_info, dirty_seglist_info,
  curseg_info.

In addition, add F2FS_SUPER_MAGIC in magic.h.
Signed-off-by: NChul Lee <chur.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>