- 19 8月, 2005 1 次提交
-
-
由 Russell King 提交于
Add support for the ARM Generic Interrupt Controller. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 8月, 2005 2 次提交
-
-
由 Brian King 提交于
This fixes a bug in the PPC64 iommu vmerge code which results in the potential for iommu_unmap_sg to go off unmapping more than it should. This was found on a test system which resulted in PCI bus errors due to PCI memory being unmapped while DMAs were still in progress. Signed-off-by: NBrian King <brking@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tony Luck 提交于
Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 17 8月, 2005 6 次提交
-
-
由 Dimitry Andric 提交于
Patch from Dimitry Andric This patch removes the initial UART I/O mapping from s3c2410_iodesc, since the same mapping is already done in the function s3c24xx_init_io in the file arch/arm/mach-s3c2410/cpu.c, through the s3c_iodesc array. I'm not sure if duplicate mappings do any harm, but it's simply redundant. Also, in s3c2440.c the UART I/O mapping is NOT done. Additionally, I put a comma behind the last mapping, to ease copy/pasting stuff around, and make the style consistent with s3c2440.c and other files. Signed-off-by: NDimitry Andric <dimitry@andric.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sean Lee 提交于
Patch from Sean Lee In the arch/arm/mm/Kconfig file, the CPU_DCACHE_WRITETHROUGH option is depend on the CPU_DISABLE_DCACHE, but the "Disable D-Cache" option is configured as CPU_DCACHE_DISABLE. The CPU_DISABLE_DCACHE should be CPU_DCACHE_DISABLE Signed-off-by: NSean Lee <beginner2arm@eyou.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stephen Rothwell 提交于
Paulus suggested that we put xLparMap in its own .c file so that we can generate a .s file to be included into head.S. This doesn't get around the problem of having it at a fixed address, but it makes it more palatable. It would be good if this could be included in 2.6.13 as it solves our build problems with various versions of binutils and gcc. In particular, it allows us to build an iSeries kernel on Debian unstable using their biarch compiler. This has been built and booted on iSeries and built for pSeries and g5. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Chubb 提交于
Just `make oldconfig' doesn't help for the zx1 defconfig --- because we need the MPT Fusion drivers, which are picked up as not selected. Tested on HP ZX2000 and ZX2600. Signed-off-by: NPeter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Greg Edwards 提交于
Signed-off-by: NGreg Edwards <edwardsg@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
Some IA64 spinlocks are not being initialized, make it so. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 16 8月, 2005 3 次提交
-
-
由 John Hawkes 提交于
Fix for ia64 sched domain building triggered by cpuset code. Acked-by: NNick Piggin <npiggin@suse.de> Acked-by: NDinakar Guniguntala <dino@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
The current one doesn't even make sense anymore on i386 where it apparently came from. Follow-up wordsmithing by Matthew Wilcox and Tony Luck. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Richard Purdie 提交于
Patch from Richard Purdie The exception handling code fails to compile if the extended precision mode is enabled. This patch fixes those compile errors and also stops _quiet functions from incorrectly raising exceptions. Reported-by: NRalph Siemsen <ralphs@netwinder.org> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 8月, 2005 2 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Robert Love 提交于
Signed-off-by: NRobert Love <rml@novell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 8月, 2005 1 次提交
-
-
由 Eric W. Biederman 提交于
Oops. I knew I didn't have the physical versus logical cpu identifiers right when I generated that patch. It's not nearly as bad as I feared at the time though. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 8月, 2005 2 次提交
-
-
由 stephane.eranian@hp.com 提交于
The PFM_LOAD_CONTEXT may fail silently and cause a session to remain reserved even though it should not. This can happen when the commands succeeds in reserving the session but fails when it actually tries to attach to the load_pid. In that case, the command has failed but will return 0. More importantly, the session will remain reserved. This patch fixes the problem. Signed-off-by: <stephane.eranian@hp.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Benjamin Herrenschmidt 提交于
The workaround for broken device-tree that prevents fan control from working on recent G5 models need to be "enabled" for machines with revision 0x37 of the bridge in addition to machines with revision 0x35. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 8月, 2005 6 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Rename the s3c2410_report_oc() to s3c2410_usb_report_oc() as this is an usb specific function. Change port power on the usb-simtec implementation to only power up the output if both are set, as per the usb 1.1 specification Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Unfortunately, we can't use the "user" bit in the page tables to control whether a page table entry is "global" or "asid" specific, since the vector page is mapped as "user" accessible but is not process specific. Therefore, give direct control of the ARMv6 "nG" (not global) bit to the mm layers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Ensure that the exclusive monitor is cleared on context switch with ARMv6 CPUs. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Morton 提交于
From: Dave Johnson <djohnson+linux-kernel@sw.starentnetworks.com> sendmsg()/recvmsg() syscalls from o32/n32 apps to a 64bit kernel will cause a kernel memory leak if iov_len > UIO_FASTIOV for each syscall! This is because both sys_sendmsg() and verify_compat_iovec() kmalloc a new iovec structure. Only the one from sys_sendmsg() is free'ed. I wrote a simple test program to confirm this after identifying the problem: http://davej.org/programs/testsendmsg.c Note that the below fix will break solaris_sendmsg()/solaris_recvmsg() as it also calls verify_compat_iovec() but expects it to malloc internally. [ I fixed that. -DaveM ] Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2005 6 次提交
-
-
由 Linus Torvalds 提交于
Revert commit fec59a71, which is breaking sparc64 that doesn't have a working pci_update_resource. We'll re-do this after 2.6.13 when we'll do it all properly.
-
由 Ken Chen 提交于
this changeset broke the "nohalt" kernel boot option. 8df5a500 default_idle() is looking at new variable can_do_pal_halt. However, that variable did not get cleared upon "nohalt" boot option. Result is that "nohalt" option is ignored until perfmon is exercised. Signed-off-by: NKen Chen <kenneth.w.chen@intel.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Olaf Hering 提交于
modprobe aes does not work on x86_64. i386 has a similar line, this could be the right fix. Would be nice to have in 2.6.13 final. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kumar Gala 提交于
The memory mappings for MPC8349 USB MPH and DR modules were reversed. Signed-off-by: NLi Yang <LeoLi@freescale.com> Signed-off-by: NJiang Bo <Tanya.jiang@freescale.com> Signed-off-by: NKumar Gala <kumar.gala@freescale.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
Update the default/example configs for ppc64. Pretty boring... Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arnd Bergmann 提交于
This adds a bpa_defconfig file and make target. The config settings are made for the current version of the Cell Processor Based Blade, so there are not too many drivers enabled. A few more drivers might get added in the future though. Signed-off-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 8月, 2005 10 次提交
-
-
由 Ravikiran G Thirumalai 提交于
Move the fix to align node_end_pfns to a proper location. The earlier fix made the node_remap_start_vaddr to get misaligned causing remap_numa_kva to barf again :-/ Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Tosatti 提交于
Touching the pte directly causes the 8Mbyte TLB entry to be invalidated. This has been fixed in v2.4 for ages. Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: commproc.c: kill unused variable Signed-off-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: restrict ENET_BIG_BUFFERS option to drivers which actually use it Signed-off-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: fix CPM Ethernet description Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: fec: fix interrupt handler prototypes Signed-off-by: NAristeu Sergio Rozanski Filho <aris@conectiva.com.br> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: using dma_alloc_coherent() instead consistent_alloc() Signed-off-by: NAristeu Sergio Rozanski Filho <aris@conectiva.com.br> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
8xx: convert fec driver to use work_struct Signed-off-by: NAristeu Sergio Rozanski Filho <aris@conectiva.com.br> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tom Duffy 提交于
This patch add stubs to allow the visws subarch to link again. Signed-off-by: NTom Duffy <thomas.duffy.99@alumni.brown.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Don't log machine check events left over from boot. Too many BIOSes leave bogus events in there. This unfortunately also makes it impossible to log events that caused a reboot. For people with non broken BIOS there is mce=bootlog Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 8月, 2005 1 次提交
-
-
由 Eric W. Biederman 提交于
When the sparse mem changes and the kexec changes were merged into setup.c they came in, in the wrong order. This patch changes the order so we don't run sparse_init which uses the bootmem allocator until we all of the reserve_bootmem calls has been made. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-