In most of the time, the driver needs to check if the cts flow control
is enabled. But now, the driver checks the ASYNC_CTS_FLOW flag manually,
which is not a grace way. So add a new wraper function to make the code
tidy and clean.
Signed-off-by: NHuang Shijie <shijie8@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

this patch is in preparation to a few other changes
which will align on the prototype for function
pointers passed through pdata.

It also helps cleaning up the driver a little by
agregating checks for pdata in a single location.
Tested-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

current code only works because struct uart_port
is the first member on the uart_omap_port structure.

If, for whatever reason, someone puts another
member as the first of the structure, that cast
won't work anymore. In order to be safe, let's use
a container_of() which, for now, gets optimized into
a cast anyway.
Tested-by: NShubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds note about migration to driver SCCNXP in the code
of driver SC26XX and in MIPS SNI board initialization with example.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is a replacement for a SC26XX driver with a lot of
improvements and new features.
The main differences from the SC26XX driver:
- Removed dependency on MIPS. Driver can be used on any platform.
- Added support for SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
  SC28L202, SCC68681 and SCC68692 ICs.
- Using devm_-related functions.
- Improved error handling of serial port, improved FIFO handling.
- Ability to load multiple instances of drivers.

To avoid the possibility of regression, driver SC26XX left in the
system to confirm the stability of the driver on platforms where
it is being used.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

To allow parport_serial to handle the card the same PCI ids are blacklisted
in 8250_pci.c using the existing software blacklist mechanism.

The blacklist array is also renamed because it now covers this new use
case.

Since the two serial ports are auto-detected as XScale instead of 16550A
clones, we also add a quirk to 8250_pci.c to skip autodetection and set the
correct port type.
Signed-off-by: NGianluca Anzolin <gianluca@sottospazio.it>
[Fold in fixes for the uart_8250 change]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following errors and warnings:
ERROR: trailing whitespace
ERROR: return is not a function, parentheses are not required
WARNING: suspect code indent for conditional statements (32, 36)
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Silences checkpatch warnings regarding use of printks.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If the order of UART nodes is changed in the device tree, then tty dev
devices are attached to different serial ports causing the console to
be directed to a different physical serial port. The "serial" aliases
in the device tree should prevent this.

This patch ensures that the UART driver creates tty devices that
honour these aliases if a device tree is present.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NMatthew Leach <matthew.leach@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This structure might have made sense many years ago, but at this
point it is only used in one specific driver, and referenced in
stale comments elsewhere.  Rather than change the sunsu.c driver,
simply move the struct to be within the exclusive domain of that
driver, so it won't get inadvertently picked up and used by other
serial drivers going forward.  The comments referencing the now
driver specific struct are updated accordingly.

Note that 8250.c has a struct that is similar in usage, with the
name serial8250_config; but is 100% independent and untouched here.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The addition of 8250-like entities continues to grow, while this
driver has a snapshot of a select few common 8250 UARTs.  So it
has no need to grow with the new additions, since it calls out
its own (largely historic) static list which does not grow.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct serial_uart_config is hardly used at all, and the
use case like this one are somewhat needless.  Remove the
trivial usage so that we can remove serial_uart_config.

Since the type field isn't really used at all, we also delete
the initialization and references of it here as well.

Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These error paths are used more often now after deep changes to the
clock code and pinctrl is still new for imx. So help debugging and give
clues in the boot log.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want them split so that we can call them from setserial functionality
where we copy to/from user space and do the locking, but also from sysfs
where in future we'll want to came them within a sysfs context.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

devm free functions should not have to be explicitly used.

A semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

(
* devm_kfree(...);
|
* devm_free_irq(...);
|
* devm_iounmap(...);
|
* devm_release_region(...);
|
* devm_release_mem_region(...);
)
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Tested on a custom MPC5200B-board using some fancy industrial protocol.
Verified that MPC512x has identical bits, so should work there as well.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

At commit 07d106d0, Linus pointed out that ENOIOCTLCMD should be
translated as ENOTTY to user mode.
For example:
	fd = open("/dev/tty", O_RDWR);
	ioctl(fd, -1, &argp);

then the errno should be ENOTTY but not EINVAL.
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no reason to explicitly call devm_kfree
in probe or remove functions.
Signed-off-by: NEmil Goode <emilgoode@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The gpiochip_remove function may fail to remove a gpio_chip
if any GPIOs are still requested. This patch informs the caller
of such a senario.

Sparse is warning because the function prototype has a
__must_check annotation.

Sparse warning:
drivers/tty/serial/max310x.c:1223:18: warning:
	ignoring return value of ‘gpiochip_remove’,
	declared with attribute warn_unused_result
	[-Wunused-result]
Signed-off-by: NEmil Goode <emilgoode@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the wrapper functions, so we can directly pass a struct
platfrom_device.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

the driver's module init and exit functions can be replaced
with module_spi_driver as they do
only spi_register_driver and spi_unregister_driver in module's init and exit
paths.
Signed-off-by: NDevendra Naga <develkernel412222@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Clk_prepare_enable and clk_disable_unprepare combine clk_prepare and
clk_enable, and clk_disable and clk_unprepare.  The9 make the code more
concise, and ensure that clk_unprepare is called when clk_enable fails.

A simplified version of the semantic patch that introduces calls to these
functions is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

- clk_prepare(e);
- clk_enable(e);
+ clk_prepare_enable(e);

@@
expression e;
@@

- clk_disable(e);
- clk_unprepare(e);
+ clk_disable_unprepare(e);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's not critical (anymore) since another thread closing the file will block
on ->device_lock before it gets to dropping the final reference, but it's
definitely cleaner that way...
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

we really need to make sure that dropping the last reference happens
under the group->device_lock; otherwise a loop (under device_lock)
might find vfio_device instance that is being freed right now, has
already dropped the last reference and waits on device_lock to exclude
the sucker from the list.
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

So we've had a fair few reports of fbcon handover breakage between
efi/vesafb and i915 surface recently, so I dedicated a couple of
days to finding the problem.

Essentially the last thing we saw was the conflicting framebuffer
message and that was all.

So after much tracing with direct netconsole writes (printks
under console_lock not so useful), I think I found the race.

Thread A (driver load)    Thread B (timer thread)
  unbind_con_driver ->              |
  bind_con_driver ->                |
  vc->vc_sw->con_deinit ->          |
  fbcon_deinit ->                   |
  console_lock()                    |
      |                             |
      |                       fbcon_flashcursor timer fires
      |                       console_lock() <- blocked for A
      |
      |
fbcon_del_cursor_timer ->
  del_timer_sync
  (BOOM)

Of course because all of this is under the console lock,
we never see anything, also since we also just unbound the active
console guess what we never see anything.

Hopefully this fixes the problem for anyone seeing vesafb->kms
driver handoff.

v1.1: add comment suggestion from Alan.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG
option off.

This patch is applicable to kernel versions starting from v3.2
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure that there is no doorbell messages left behind due to disabled
interrupts during inbound doorbell processing.

The most common case for this bug is loss of rionet JOIN messages in
systems with three or more rionet participants and MSI or MSI-X enabled.
As result, requests for packet transfers may finish with "destination
unreachable" error message.

This patch is applicable to kernel versions starting from v3.2.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Correct the offset by subtracting 20 from tm_hour before taking the
modulo 12.

[ "Why 20?" I hear you ask. Or at least I did.

  Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly -
  included in the RS5C348_HOURS_MASK define.  So it's really subtracting
  out that bit to get "hour+12".  But then because it does things modulo
  12, it needs to add the 12 in again afterwards anyway.

  This code is confused.  It would be much clearer if RS5C348_HOURS_MASK
  just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't
  need to do the silly subtract either.

  Whatever. It's all just math, the end result is the same.   - Linus ]
Reported-by: NJames Nute <newten82@gmail.com>
Tested-by: NJames Nute <newten82@gmail.com>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dynamically allocated sysfs attributes must be initialized using
sysfs_attr_init(), otherwise lockdep complains: BUG: key <address> not in
.data!

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NIlya Shchepetkov <shchepetkov@ispras.ru>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On many of our larger systems, CPU 0 has had all of its IRQ resources
consumed before XPC loads.  Worst cases on machines with multiple 10
GigE cards and multiple IB cards have depleted the entire first socket
of IRQs.

This patch makes selecting the node upon which IRQs are allocated (as
well as all the other GRU Message Queue structures) specifiable as a
module load param and has a default behavior of searching all nodes/cpus
for an available resources.

[akpm@linux-foundation.org: fix build: include cpu.h and module.h]
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delete code which sets SCSI status incorrectly as it's already been set
correctly above this incorrect code.  The bug was introduced in 2009 by
commit b0e15f6d ("cciss: fix typo that causes scsi status to be
lost.")
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: NRoel van Meer <roel.vanmeer@bokxing.nl>
Tested-by: NRoel van Meer <roel.vanmeer@bokxing.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJens Rottmann <JRottmann@LiPPERTEmbedded.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the following sparse warning:
drivers/gpu/drm/drm_proc.c:92:5:
warning: symbol 'drm_proc_create_files' was not declared. Should it be static?
drivers/gpu/drm/drm_proc.c:175:5:
warning: symbol 'drm_proc_remove_files' was not declared. Should it be static?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This turns off the crtc when its been disabled,
fixes it not turning off properly the whole time.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If you do a page flip with no flags set then event is NULL. If event is
NULL then the vmw_gfx driver likes to go digging into NULL and extracts
NULL->base.file_priv.

On a modern kernel with NULL mapping protection it's just another oops,
without it there are some "intriguing" possibilities.

What it should do is an open question but that for the driver owners to
sort out.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

When checking if a pll is in use.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This was originally for helping fabrics to determine overflow/underflow
status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>