As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() and pci_enable_msix_range()
interfaces.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

There is no need to call pci_disable_msi() in case
the previous call to pci_enable_msi() failed
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

Right now every resource has exactly one connection. But we are preparing
for dynamic connections. I.e. in the future thre can be resources without
connections.

However smatch points this out as 'variable dereferenced before check',
which is correct.

This issue was introduced in
drbd: get_one_status(): Iterate over resource->devices instead of connection->peer_devices
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In the drbd_thread "infrastructure" functions, only use the resource instead of
the connection.  Make the connection field of drbd_thread optional.  This will
allow to introduce threads which are not associated with a connection.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

in w_e_ (peer request) callbacks and in peer request I/O completion handlers
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

These functions are not used as drbd_work callbacks.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

The new function can flush any work queue, not just the work queue of the data
socket of a connection.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

drbd_device_work is a work item that has a reference to a device,
while drbd_work is a more generic work item that does not carry
a reference to a device.

All callbacks get a pointer to a drbd_work instance, those callbacks
that expect a drbd_device_work use the container_of macro to get it.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Also move it to drbd_receiver.c and make it static.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

These functions actually operate on a peer device, or
need a peer device.

drbd_prepare_command(), drbd_send_command(), drbd_send_sync_param()
drbd_send_uuids(), drbd_gen_and_send_sync_uuid(), drbd_send_sizes()
drbd_send_state(), drbd_send_current_state(), and drbd_send_state_req()
drbd_send_sr_reply(), drbd_send_ack(), drbd_send_drequest(),
drbd_send_drequest_csum(), drbd_send_ov_request(), drbd_send_dblock()
drbd_send_block(), drbd_send_out_of_sync(), recv_dless_read()
drbd_drain_block(), receive_bitmap_plain(), recv_resync_read()
read_in_block(), read_for_csum(), drbd_alloc_pages(), drbd_alloc_peer_req()
need_peer_seq(), update_peer_seq(), wait_for_and_update_peer_seq()
drbd_sync_handshake(), drbd_asb_recover_{0,1,2}p(), drbd_connected()
drbd_disconnected(), decode_bitmap_c() and recv_bm_rle_bits()
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

The new function returns a peer device, which allows us to eliminate a few
instances of first_peer_device().
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Also fix drbd_calc_cpu_mask() to spread resources equally over all online cpus
independent of device minor numbers.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Also change drbd_adm_connect() to expect a resource after it requested one.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

in drbd_adm_down(), drbd_create_device() and drbd_set_role()
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

The implicit dependency on a variable inside the macro is problematic.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

With the polymorphic drbd_() macros, we no longer need the connection
specific variants.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

This allows drbd_alert(), drbd_err(), drbd_warn(), and drbd_info() to work for
a resource, device, or connection so that we don't have to introduce three
separate sets of macros for that.

The drbd_printk() macro itself is pretty ugly, but that problem is limited to
one place in the code.  Using drbd_printk() on an object type which it doesn't
understand results in an undefined drbd_printk_with_wrong_object_type symbol.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

DRBD was using dev_err() and similar all over the code; instead of having to
write dev_err(disk_to_dev(device->vdisk), ...) to convert a drbd_device into a
kernel device, a DEV macro was used which implicitly references the device
variable.  This is terrible; introduce separate drbd_err() and similar macros
with an explicit device parameter instead.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Let connection->peer_devices point to peer devices; connection->volumes was
pointing to devices.
Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>

Signed-off-by: NAndreas Gruenbacher <agruen@linbit.com>
Signed-off-by: NPhilipp Reisner <philipp.reisner@linbit.com>