If CONFIG_RCU_NOCB_CPU_ALL=y, then no CPU will ever have RCU callbacks
because these callbacks will instead be handled by the rcuo kthreads.
However, the current version of RCU_FAST_NO_HZ nevertheless checks for RCU
callbacks.  This commit therefore creates static inline implementations
of rcu_prepare_for_idle() and rcu_cleanup_after_idle() that are no-ops
when CONFIG_RCU_NOCB_CPU_ALL=y.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

If CONFIG_RCU_NOCB_CPU_ALL=y, then rcu_needs_cpu() will always
return false, however, the current version nevertheless checks
for RCU callbacks.  This commit therefore creates a static inline
implementation of rcu_needs_cpu() that unconditionally returns false
when CONFIG_RCU_NOCB_CPU_ALL=y.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

If CONFIG_RCU_NOCB_CPU_ALL=y, then rcu_is_nocb_cpu() will always
return true, however, the current version nevertheless checks
rcu_nocb_mask.  This commit therefore creates a static inline
implementation of rcu_is_nocb_cpu() that unconditionally returns
true when CONFIG_RCU_NOCB_CPU_ALL=y.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

RCU must ensure that there is the equivalent of a full memory
barrier between any memory access preceding grace period and any
memory access following that same grace period, regardless of
which CPU(s) happen to execute the two memory accesses.
Therefore, downgrading UNLOCK+LOCK to no longer imply a full
memory barrier requires some adjustments to RCU.

This commit therefore adds smp_mb__after_unlock_lock()
invocations as needed after the RCU lock acquisitions that need
to be part of a full-memory-barrier UNLOCK+LOCK.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1386799151-2219-7-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Whenever a CPU receives a scheduling-clock interrupt, RCU checks to see
if the RCU core needs anything from this CPU.  If so, RCU raises
RCU_SOFTIRQ to carry out any needed processing.

This approach has worked well historically, but it is undesirable on
NO_HZ_FULL CPUs.  Such CPUs are expected to spend almost all of their time
in userspace, so that scheduling-clock interrupts can be disabled while
there is only one runnable task on the CPU in question.  Unfortunately,
raising any softirq has the potential to wake up ksoftirqd, which would
provide the second runnable task on that CPU, preventing disabling of
scheduling-clock interrupts.

What is needed instead is for RCU to leave NO_HZ_FULL CPUs alone,
relying on the grace-period kthreads' quiescent-state forcing to
do any needed RCU work on behalf of those CPUs.

This commit therefore refrains from raising RCU_SOFTIRQ on any
NO_HZ_FULL CPUs during any grace periods that have been in effect
for less than one second.  The one-second limit handles the case
where an inappropriate workload is running on a NO_HZ_FULL CPU
that features lots of scheduling-clock interrupts, but no idle
or userspace time.
Reported-by: NMike Galbraith <bitbucket@online.de>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NMike Galbraith <bitbucket@online.de>
Toasted-by: NFrederic Weisbecker <fweisbec@gmail.com>

After commit #10f39bb1 (rcu: protect __rcu_read_unlock() against
scheduler-using irq handlers), it is no longer possible to enter
the main body of rcu_read_lock_special() from an NMI, interrupt, or
softirq handler.  In theory, this implies that the check for "in_irq()
|| in_serving_softirq()" must always fail, so that in theory this check
could be removed entirely.

In practice, this commit wraps this condition with a WARN_ON_ONCE().
If this warning never triggers, then the condition will be removed
entirely.

[ paulmck: And one way of triggering the WARN_ON() is if a scheduling
  clock interrupt occurs in an RCU read-side critical section, setting
  RCU_READ_UNLOCK_NEED_QS, which is handled by rcu_read_unlock_special().
  Updated this commit to return if only that bit was set. ]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Dave Jones got the following lockdep splat:

>  ======================================================
>  [ INFO: possible circular locking dependency detected ]
>  3.12.0-rc3+ #92 Not tainted
>  -------------------------------------------------------
>  trinity-child2/15191 is trying to acquire lock:
>   (&rdp->nocb_wq){......}, at: [<ffffffff8108ff43>] __wake_up+0x23/0x50
>
> but task is already holding lock:
>   (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230
>
> which lock already depends on the new lock.
>
>
> the existing dependency chain (in reverse order) is:
>
> -> #3 (&ctx->lock){-.-...}:
>         [<ffffffff810cc243>] lock_acquire+0x93/0x200
>         [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80
>         [<ffffffff811500ff>] __perf_event_task_sched_out+0x2df/0x5e0
>         [<ffffffff81091b83>] perf_event_task_sched_out+0x93/0xa0
>         [<ffffffff81732052>] __schedule+0x1d2/0xa20
>         [<ffffffff81732f30>] preempt_schedule_irq+0x50/0xb0
>         [<ffffffff817352b6>] retint_kernel+0x26/0x30
>         [<ffffffff813eed04>] tty_flip_buffer_push+0x34/0x50
>         [<ffffffff813f0504>] pty_write+0x54/0x60
>         [<ffffffff813e900d>] n_tty_write+0x32d/0x4e0
>         [<ffffffff813e5838>] tty_write+0x158/0x2d0
>         [<ffffffff811c4850>] vfs_write+0xc0/0x1f0
>         [<ffffffff811c52cc>] SyS_write+0x4c/0xa0
>         [<ffffffff8173d4e4>] tracesys+0xdd/0xe2
>
> -> #2 (&rq->lock){-.-.-.}:
>         [<ffffffff810cc243>] lock_acquire+0x93/0x200
>         [<ffffffff81733f90>] _raw_spin_lock+0x40/0x80
>         [<ffffffff810980b2>] wake_up_new_task+0xc2/0x2e0
>         [<ffffffff81054336>] do_fork+0x126/0x460
>         [<ffffffff81054696>] kernel_thread+0x26/0x30
>         [<ffffffff8171ff93>] rest_init+0x23/0x140
>         [<ffffffff81ee1e4b>] start_kernel+0x3f6/0x403
>         [<ffffffff81ee1571>] x86_64_start_reservations+0x2a/0x2c
>         [<ffffffff81ee1664>] x86_64_start_kernel+0xf1/0xf4
>
> -> #1 (&p->pi_lock){-.-.-.}:
>         [<ffffffff810cc243>] lock_acquire+0x93/0x200
>         [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90
>         [<ffffffff810979d1>] try_to_wake_up+0x31/0x350
>         [<ffffffff81097d62>] default_wake_function+0x12/0x20
>         [<ffffffff81084af8>] autoremove_wake_function+0x18/0x40
>         [<ffffffff8108ea38>] __wake_up_common+0x58/0x90
>         [<ffffffff8108ff59>] __wake_up+0x39/0x50
>         [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0
>         [<ffffffff81111450>] __call_rcu+0x140/0x820
>         [<ffffffff81111b8d>] call_rcu+0x1d/0x20
>         [<ffffffff81093697>] cpu_attach_domain+0x287/0x360
>         [<ffffffff81099d7e>] build_sched_domains+0xe5e/0x10a0
>         [<ffffffff81efa7fc>] sched_init_smp+0x3b7/0x47a
>         [<ffffffff81ee1f4e>] kernel_init_freeable+0xf6/0x202
>         [<ffffffff817200be>] kernel_init+0xe/0x190
>         [<ffffffff8173d22c>] ret_from_fork+0x7c/0xb0
>
> -> #0 (&rdp->nocb_wq){......}:
>         [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0
>         [<ffffffff810cc243>] lock_acquire+0x93/0x200
>         [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90
>         [<ffffffff8108ff43>] __wake_up+0x23/0x50
>         [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0
>         [<ffffffff81111450>] __call_rcu+0x140/0x820
>         [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30
>         [<ffffffff81149abf>] put_ctx+0x4f/0x70
>         [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230
>         [<ffffffff81056b8d>] do_exit+0x30d/0xcc0
>         [<ffffffff8105893c>] do_group_exit+0x4c/0xc0
>         [<ffffffff810589c4>] SyS_exit_group+0x14/0x20
>         [<ffffffff8173d4e4>] tracesys+0xdd/0xe2
>
> other info that might help us debug this:
>
> Chain exists of:
>   &rdp->nocb_wq --> &rq->lock --> &ctx->lock
>
>   Possible unsafe locking scenario:
>
>         CPU0                    CPU1
>         ----                    ----
>    lock(&ctx->lock);
>                                 lock(&rq->lock);
>                                 lock(&ctx->lock);
>    lock(&rdp->nocb_wq);
>
>  *** DEADLOCK ***
>
> 1 lock held by trinity-child2/15191:
>  #0:  (&ctx->lock){-.-...}, at: [<ffffffff81154c19>] perf_event_exit_task+0x109/0x230
>
> stack backtrace:
> CPU: 2 PID: 15191 Comm: trinity-child2 Not tainted 3.12.0-rc3+ #92
>  ffffffff82565b70 ffff880070c2dbf8 ffffffff8172a363 ffffffff824edf40
>  ffff880070c2dc38 ffffffff81726741 ffff880070c2dc90 ffff88022383b1c0
>  ffff88022383aac0 0000000000000000 ffff88022383b188 ffff88022383b1c0
> Call Trace:
>  [<ffffffff8172a363>] dump_stack+0x4e/0x82
>  [<ffffffff81726741>] print_circular_bug+0x200/0x20f
>  [<ffffffff810cb7ca>] __lock_acquire+0x191a/0x1be0
>  [<ffffffff810c6439>] ? get_lock_stats+0x19/0x60
>  [<ffffffff8100b2f4>] ? native_sched_clock+0x24/0x80
>  [<ffffffff810cc243>] lock_acquire+0x93/0x200
>  [<ffffffff8108ff43>] ? __wake_up+0x23/0x50
>  [<ffffffff8173419b>] _raw_spin_lock_irqsave+0x4b/0x90
>  [<ffffffff8108ff43>] ? __wake_up+0x23/0x50
>  [<ffffffff8108ff43>] __wake_up+0x23/0x50
>  [<ffffffff8110d4f8>] __call_rcu_nocb_enqueue+0xa8/0xc0
>  [<ffffffff81111450>] __call_rcu+0x140/0x820
>  [<ffffffff8109bc8f>] ? local_clock+0x3f/0x50
>  [<ffffffff81111bb0>] kfree_call_rcu+0x20/0x30
>  [<ffffffff81149abf>] put_ctx+0x4f/0x70
>  [<ffffffff81154c3e>] perf_event_exit_task+0x12e/0x230
>  [<ffffffff81056b8d>] do_exit+0x30d/0xcc0
>  [<ffffffff810c9af5>] ? trace_hardirqs_on_caller+0x115/0x1e0
>  [<ffffffff810c9bcd>] ? trace_hardirqs_on+0xd/0x10
>  [<ffffffff8105893c>] do_group_exit+0x4c/0xc0
>  [<ffffffff810589c4>] SyS_exit_group+0x14/0x20
>  [<ffffffff8173d4e4>] tracesys+0xdd/0xe2

The underlying problem is that perf is invoking call_rcu() with the
scheduler locks held, but in NOCB mode, call_rcu() will with high
probability invoke the scheduler -- which just might want to use its
locks.  The reason that call_rcu() needs to invoke the scheduler is
to wake up the corresponding rcuo callback-offload kthread, which
does the job of starting up a grace period and invoking the callbacks
afterwards.

One solution (championed on a related problem by Lai Jiangshan) is to
simply defer the wakeup to some point where scheduler locks are no longer
held.  Since we don't want to unnecessarily incur the cost of such
deferral, the task before us is threefold:

1.	Determine when it is likely that a relevant scheduler lock is held.

2.	Defer the wakeup in such cases.

3.	Ensure that all deferred wakeups eventually happen, preferably
	sooner rather than later.

We use irqs_disabled_flags() as a proxy for relevant scheduler locks
being held.  This works because the relevant locks are always acquired
with interrupts disabled.  We may defer more often than needed, but that
is at least safe.

The wakeup deferral is tracked via a new field in the per-CPU and
per-RCU-flavor rcu_data structure, namely ->nocb_defer_wakeup.

This flag is checked by the RCU core processing.  The __rcu_pending()
function now checks this flag, which causes rcu_check_callbacks()
to initiate RCU core processing at each scheduling-clock interrupt
where this flag is set.  Of course this is not sufficient because
scheduling-clock interrupts are often turned off (the things we used to
be able to count on!).  So the flags are also checked on entry to any
state that RCU considers to be idle, which includes both NO_HZ_IDLE idle
state and NO_HZ_FULL user-mode-execution state.

This approach should allow call_rcu() to be invoked regardless of what
locks you might be holding, the key word being "should".
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>

It is all too easy to forget that wait_event() does not necessarily
imply a full memory barrier.  The case where it does not is where the
condition transitions to true just as wait_event() starts execution.
This is actually a feature: The standard use of wait_event() involves
locking, in which case the locks provide the needed ordering (you hold a
lock across the wake_up() and acquire that same lock after wait_event()
returns).

Given that I did forget that wait_event() does not necessarily imply a
full memory barrier in one case, this commit fixes that case.  This commit
also adds comments calling out the placement of existing memory barriers
relied on by wait_event() calls.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

RCU and the fine grained idle time accounting functions check
tick_nohz_enabled. But that variable is merily telling that NOHZ has
been enabled in the config and not been disabled on the command line.

But it does not tell anything about nohz being active. That's what all
this should check for.

Matthew reported, that the idle accounting on his old P1 machine
showed bogus values, when he enabled NOHZ in the config and did not
disable it on the kernel command line. The reason is that his machine
uses (refined) jiffies as a clocksource which explains why the "fine"
grained accounting went into lala land, because it depends on when the
system goes and leaves idle relative to the jiffies increment.

Provide a tick_nohz_active indicator and let RCU and the accounting
code use this instead of tick_nohz_enable.
Reported-and-tested-by: NMatthew Whitehead <tedheadster@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: john.stultz@linaro.org
Cc: mwhitehe@redhat.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311132052240.30673@ionos.tec.linutronix.de

Suggested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-p9ijt8div0hwldexwfm4nlhj@git.kernel.org
[ Fixed build failure in kernel/rcu/tree_plugin.h. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NIngo Molnar <mingo@kernel.org>

If a non-lazy callback arrives on a CPU that has previously gone idle
with no non-lazy callbacks, invoke_rcu_core() forces the RCU core to
run.  However, it does not update the conditions, which could result
in several closely spaced invocations of the RCU core, which in turn
could result in an excessively high context-switch rate and resulting
high overhead.

This commit therefore updates the ->all_lazy and ->nonlazy_posted_snap
fields to prevent closely spaced invocations.
Reported-by: NTibor Billes <tbilles@gmx.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NTibor Billes <tbilles@gmx.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The rcu_try_advance_all_cbs() function is invoked on each attempted
entry to and every exit from idle.  If this function determines that
there are callbacks ready to invoke, the caller will invoke the RCU
core, which in turn will result in a pair of context switches.  If a
CPU enters and exits idle extremely frequently, this can result in
an excessive number of context switches and high CPU overhead.

This commit therefore causes rcu_try_advance_all_cbs() to throttle
itself, refusing to do work more than once per jiffy.
Reported-by: NTibor Billes <tbilles@gmx.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NTibor Billes <tbilles@gmx.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

The rcu_try_advance_all_cbs() function returns a bool saying whether or
not there are callbacks ready to invoke, but rcu_cleanup_after_idle()
rechecks this regardless.  This commit therefore uses the value returned
by rcu_try_advance_all_cbs() instead of making rcu_cleanup_after_idle()
do this recheck.
Reported-by: NTibor Billes <tbilles@gmx.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NTibor Billes <tbilles@gmx.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Some architectures have sparse cpu mask. UltraSparc's cpuinfo for example:

CPU0: online
CPU2: online

So, set only possible CPUs when CONFIG_RCU_NOCB_CPU_ALL is enabled.

Also, check that user passes right 'rcu_nocbs=' option.
Signed-off-by: NKirill Tkhai <tkhai@yandex.ru>
CC: Dipankar Sarma <dipankar@in.ibm.com>
[ paulmck: Fix pr_info() issue noted by scripts/checkpatch.pl. ]
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit adds event traces to track all of rcu_nocb_kthread()'s
blocking and awakening.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

One way to distinguish between NOCB and non-NOCB rcu_callback trace
events is that the former always print zero for the lazy and non-lazy
queue lengths.  Unfortunately, this also means that we cannot see the NOCB
queue lengths.  This commit therefore accesses the NOCB queue lengths,
but negates them.  NOCB rcu_callback trace events should therefore have
negative queue lengths.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Match operand size per kbuild test robot's advice. ]

Lost wakeups from call_rcu() to the rcuo kthreads can result in hangs
that are difficult to diagnose.  This commit therefore adds tracing to
help pin down the cause of these hangs.
Reported-by: NClark Williams <williams@redhat.com>
Reported-by: NCarsten Emde <C.Emde@osadl.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Add const per kbuild test robot's advice. ]

__get_cpu_var() is used for multiple purposes in the kernel source. One
of them is address calculation via the form &__get_cpu_var(x). This
calculates the address for the instance of the percpu variable of the
current processor based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

__get_cpu_var() always only does an address determination. However,
store and retrieve operations could use a segment prefix (or global
register on other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into
a percpu area and use optimized assembly code to read and write per
cpu variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations
that use the offset. Thereby address calcualtions are avoided and less
registers are used when code is generated.

At the end of the patchset all uses of __get_cpu_var have been removed
so the macro is removed too.

The patchset includes passes over all arches as well. Once these
operations are used throughout then specialized macros can be defined in
non -x86 arches as well in order to optimize per cpu access by f.e. using
a global register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
   variable.

	DEFINE_PER_CPU(int, u);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(this_cpu_ptr(&x), y, sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	this_cpu_inc(y)
Signed-off-by: NChristoph Lameter <cl@linux.com>
[ paulmck: Address conflicts. ]
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

This commit replaces an incorrect (but fortunately functional)
bitwise OR ("|") operator with the correct logical OR ("||").
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Because RCU's quiescent-state-forcing mechanism is used to drive the
full-system-idle state machine, and because this mechanism is executed
by RCU's grace-period kthreads, this commit forces these kthreads to
run on the timekeeping CPU (tick_do_timer_cpu).  To do otherwise would
mean that the RCU grace-period kthreads would force the system into
non-idle state every time they drove the state machine, which would
be just a bit on the futile side.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit adds the state machine that takes the per-CPU idle data
as input and produces a full-system-idle indication as output.  This
state machine is driven out of RCU's quiescent-state-forcing
mechanism, which invokes rcu_sysidle_check_cpu() to collect per-CPU
idle state and then rcu_sysidle_report() to drive the state machine.

The full-system-idle state is sampled using rcu_sys_is_idle(), which
also drives the state machine if RCU is idle (and does so by forcing
RCU to become non-idle).  This function returns true if all but the
timekeeping CPU (tick_do_timer_cpu) are idle and have been idle long
enough to avoid memory contention on the full_sysidle_state state
variable.  The rcu_sysidle_force_exit() may be called externally
to reset the state machine back into non-idle state.

For large systems the state machine is driven out of RCU's
force-quiescent-state logic, which provides good scalability at the price
of millisecond-scale latencies on the transition to full-system-idle
state.  This is not so good for battery-powered systems, which are usually
small enough that they don't need to care about scalability, but which
do care deeply about energy efficiency.  Small systems therefore drive
the state machine directly out of the idle-entry code.  The number of
CPUs in a "small" system is defined by a new NO_HZ_FULL_SYSIDLE_SMALL
Kconfig parameter, which defaults to 8.  Note that this is a build-time
definition.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
[ paulmck: Use true and false for boolean constants per Lai Jiangshan. ]
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
[ paulmck: Simplify logic and provide better comments for memory barriers,
  based on review comments and questions by Lai Jiangshan. ]

This commit adds control variables and states for full-system idle.
The system will progress through the states in numerical order when
the system is fully idle (other than the timekeeping CPU), and reset
down to the initial state if any non-timekeeping CPU goes non-idle.
The current state is kept in full_sysidle_state.

One flavor of RCU will be in charge of driving the state machine,
defined by rcu_sysidle_state.  This should be the busiest flavor of RCU.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit adds the code that updates the rcu_dyntick structure's
new fields to track the per-CPU idle state based on interrupts and
transitions into and out of the idle loop (NMIs are ignored because NMI
handlers cannot cleanly read out the time anyway).  This code is similar
to the code that maintains RCU's idea of per-CPU idleness, but differs
in that RCU treats CPUs running in user mode as idle, where this new
code does not.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit adds fields to the rcu_dyntick structure that are used to
detect idle CPUs.  These new fields differ from the existing ones in
that the existing ones consider a CPU executing in user mode to be idle,
where the new ones consider CPUs executing in user mode to be busy.
The handling of these new fields is otherwise quite similar to that for
the exiting fields.  This commit also adds the initialization required
for these fields.

So, why is usermode execution treated differently, with RCU considering
it a quiescent state equivalent to idle, while in contrast the new
full-system idle state detection considers usermode execution to be
non-idle?

It turns out that although one of RCU's quiescent states is usermode
execution, it is not a full-system idle state.  This is because the
purpose of the full-system idle state is not RCU, but rather determining
when accurate timekeeping can safely be disabled.  Whenever accurate
timekeeping is required in a CONFIG_NO_HZ_FULL kernel, at least one
CPU must keep the scheduling-clock tick going.  If even one CPU is
executing in user mode, accurate timekeeping is requires, particularly for
architectures where gettimeofday() and friends do not enter the kernel.
Only when all CPUs are really and truly idle can accurate timekeeping be
disabled, allowing all CPUs to turn off the scheduling clock interrupt,
thus greatly improving energy efficiency.

This naturally raises the question "Why is this code in RCU rather than in
timekeeping?", and the answer is that RCU has the data and infrastructure
to efficiently make this determination.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Currently, RCU tracepoints save only a pointer to strings in the
ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file
they are referenced like the printf "%s" that looks at the address
in the ring buffer and prints out the string it points too. This requires
that the strings are constant and persistent in the kernel.

The problem with this is for tools like trace-cmd and perf that read the
binary data from the buffers but have no access to the kernel memory to
find out what string is represented by the address in the buffer.

By using the tracepoint_string infrastructure, the RCU tracepoint strings
can be exported such that userspace tools can map the addresses to
the strings.

 # cat /sys/kernel/debug/tracing/printk_formats
0xffffffff81a4a0e8 : "rcu_preempt"
0xffffffff81a4a0f4 : "rcu_bh"
0xffffffff81a4a100 : "rcu_sched"
0xffffffff818437a0 : "cpuqs"
0xffffffff818437a6 : "rcu_sched"
0xffffffff818437a0 : "cpuqs"
0xffffffff818437b0 : "rcu_bh"
0xffffffff818437b7 : "Start context switch"
0xffffffff818437cc : "End context switch"
0xffffffff818437a0 : "cpuqs"
[...]

Now userspaces tools can display:

 rcu_utilization:      Start context switch
 rcu_dyntick:          Start 1 0
 rcu_utilization:      End context switch
 rcu_batch_start:      rcu_preempt CBs=0/5 bl=10
 rcu_dyntick:          End 0 140000000000000
 rcu_invoke_callback:  rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback
 rcu_invoke_callback:  rcu_preempt rhp=0xffff880077b5b230 func=__d_free
 rcu_dyntick:          Start 140000000000000 0
 rcu_invoke_callback:  rcu_preempt rhp=0xffff880077563980 func=file_free_rcu
 rcu_batch_end:        rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c<
 rcu_utilization:      End RCU core
 rcu_grace_period:     rcu_preempt 9741 start
 rcu_dyntick:          Start 1 0
 rcu_dyntick:          End 0 140000000000000
 rcu_dyntick:          Start 140000000000000 0

Instead of:

 rcu_utilization:      ffffffff81843110
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32
 rcu_batch_start:      ffffffff81842f1d CBs=0/4 bl=10
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c
 rcu_grace_period:     ffffffff81842f1d 9939 ffffffff81842f80
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu
 rcu_grace_period:     ffffffff81842f1d 9939 ffffffff81842f95
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free
 rcu_grace_period:     ffffffff81842f1d 9939 ffffffff81842f80
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu
 rcu_batch_end:        ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c<
 rcu_utilization:      ffffffff8184311f
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The RCU_STATE_INITIALIZER() macro is used only in the rcutree.c file
as well as the rcutree_plugin.h file. It is passed as a rvalue to
a variable of a similar name. A per_cpu variable is also created
with a similar name as well.

The uses of RCU_STATE_INITIALIZER() can be simplified to remove some
of the duplicate code that is done. Currently the three users of this
macro has this format:

struct rcu_state rcu_sched_state =
	RCU_STATE_INITIALIZER(rcu_sched, call_rcu_sched);
DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);

Notice that "rcu_sched" is called three times. This is the same with
the other two users. This can be condensed to just:

RCU_STATE_INITIALIZER(rcu_sched, call_rcu_sched);

by moving the rest into the macro itself.

This also opens the door to allow the RCU tracepoint strings and
their addresses to be exported so that userspace tracing tools can
translate the contents of the pointers of the RCU tracepoints.
The change will allow for helper code to be placed in the
RCU_STATE_INITIALIZER() macro to export the name that is used.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the drivers/rcu uses of the __cpuinit macros
from all C files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@freedesktop.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Now that TINY_PREEMPT_RCU is no more, exit_rcu() is always an empty
function.  But if TINY_RCU is going to have an empty function, it should
be in include/linux/rcutiny.h, where it does not bloat the kernel.
This commit therefore moves exit_rcu() out of kernel/rcupdate.c to
kernel/rcutree_plugin.h, and places a static inline empty function in
include/linux/rcutiny.h in order to shrink TINY_RCU a bit.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

After a release or two, features are no longer experimental.  Therefore,
this commit removes the "Experimental" tag from them.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Because note_gp_changes() now incorporates rcu_process_gp_end() function,
this commit switches to the former and eliminates the latter.  In
addition, this commit changes external calls from __rcu_process_gp_end()
to __note_gp_changes().
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

This commit converts printk() calls to the corresponding pr_*() calls.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

When rcu_init() is called we already have slab working, allocating
bootmem at that point results in warnings and an allocation from
slab.  This commit therefore changes alloc_bootmem_cpumask_var() to
alloc_cpumask_var() in rcu_bootup_announce_oddness(), which is called
from rcu_init().
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Tested-by: NRobin Holt <holt@sgi.com>

[paulmck: convert to zalloc_cpumask_var(), as suggested by Yinghai Lu.]

Commit c0f4dfd4 (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
callbacks) introduced a bug that can result in excessively long grace
periods.  This bug reverse the senes of the "if" statement checking
for lazy callbacks, so that RCU takes a lazy approach when there are
in fact non-lazy callbacks.  This can result in excessive boot, suspend,
and resume times.

This commit therefore fixes the sense of this "if" statement.
Reported-by: NBorislav Petkov <bp@alien8.de>
Reported-by: NBjørn Mork <bjorn@mork.no>
Reported-by: NJoerg Roedel <joro@8bytes.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: NBjørn Mork <bjorn@mork.no>
Tested-by: NJoerg Roedel <joro@8bytes.org>

We need full dynticks CPU to also be RCU nocb so
that we don't have to keep the tick to handle RCU
callbacks.

Make sure the range passed to nohz_full= boot
parameter is a subset of rcu_nocbs=

The CPUs that fail to meet this requirement will be
excluded from the nohz_full range. This is checked
early in boot time, before any CPU has the opportunity
to stop its tick.
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

Adaptive-ticks CPUs inform RCU when they enter kernel mode, but they do
not necessarily turn the scheduler-clock tick back on.  This state of
affairs could result in RCU waiting on an adaptive-ticks CPU running
for an extended period in kernel mode.  Such a CPU will never run the
RCU state machine, and could therefore indefinitely extend the RCU state
machine, sooner or later resulting in an OOM condition.

This patch, inspired by an earlier patch by Frederic Weisbecker, therefore
causes RCU's force-quiescent-state processing to check for this condition
and to send an IPI to CPUs that remain in that state for too long.
"Too long" currently means about three jiffies by default, which is
quite some time for a CPU to remain in the kernel without blocking.
The rcu_tree.jiffies_till_first_fqs and rcutree.jiffies_till_next_fqs
sysfs variables may be used to tune "too long" if needed.
Reported-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>

CPUs going idle will need to record the need for a future grace
period, but won't actually need to block waiting on it.  This commit
therefore splits rcu_start_future_gp(), which does the recording, from
rcu_nocb_wait_gp(), which now invokes rcu_start_future_gp() to do the
recording, after which rcu_nocb_wait_gp() does the waiting.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

CPUs going idle need to be able to indicate their need for future grace
periods.  A mechanism for doing this already exists for no-callbacks
CPUs, so the idea is to re-use that mechanism.  This commit therefore
moves the ->n_nocb_gp_requests field of the rcu_node structure out from
under the CONFIG_RCU_NOCB_CPU #ifdef and renames it to ->need_future_gp.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

If CPUs are to give prior notice of needed grace periods, it will be
necessary to invoke rcu_start_gp() without dropping the root rcu_node
structure's ->lock.  This commit takes a second step in this direction
by moving the release of this lock to rcu_start_gp()'s callers.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>

Dyntick-idle CPUs need to be able to pre-announce their need for grace
periods.  This can be done using something similar to the mechanism used
by no-CB CPUs to announce their need for grace periods.  This commit
moves in this direction by renaming the no-CBs grace-period event tracing
to suit the new future-grace-period needs.
Signed-off-by: NPaul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>