Allow flag NO_TIMESTAMP to turn timestamping on again, like other flags,
with a negation of the flag like !NO_TIMESTAMP.

Also document the option flag NO_TIMESTAMP.

Fixes: afb84b62 ("pktgen: add flag NO_TIMESTAMP to disable timestamping")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trying to use burst capability (aka xmit_more) on a virtual device
like bonding is not supported.

For example, skb might be queued multiple times on a qdisc, with
various list corruptions.

Fixes: 38b2cf29 ("net: pktgen: packet bursting via skb->xmit_more")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Spelling errors caught by codespell.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes two issues in UDP checksum computation in pktgen.

First, the pseudo-header uses the source and destination IP
addresses. Currently, the ports are used for IPv4.

Second, the UDP checksum covers both header and data.  So we need to
generate the data earlier (move pktgen_finalize_skb up), and compute
the checksum for UDP header + data.

Fixes: c26bf4a5 ("pktgen: Add UDPCSUM flag to support UDP checksums")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The proc_remove() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch demonstrates the effect of delaying update of HW tailptr.
(based on earlier patch by Jesper)

burst=1 is the default. It sends one packet with xmit_more=false
burst=2 sends one packet with xmit_more=true and
        2nd copy of the same packet with xmit_more=false
burst=3 sends two copies of the same packet with xmit_more=true and
        3rd copy with xmit_more=false

Performance with ixgbe (usec 30):
burst=1  tx:9.2 Mpps
burst=2  tx:13.5 Mpps
burst=3  tx:14.5 Mpps full 10G line rate
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the more common pr_warn.
Realign arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Then testing the TX limits of the stack, then it is useful to
be-able to disable the do_gettimeofday() timetamping on every packet.

This implements a pktgen flag NO_TIMESTAMP which will disable this
call to do_gettimeofday().

The performance change on (my system E5-2695) with skb_clone=0, goes
from TX 2,423,751 pps to 2,567,165 pps with flag NO_TIMESTAMP. Thus,
the cost of do_gettimeofday() or saving is approx 23 nanosec.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For now it will always be false.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

That way we don't have to audit every call site to make sure it is
doing this properly.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace occurences of skb_get_queue_mapping() and follow-up
netdev_get_tx_queue() with an actual helper function.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The if_lock()/if_unlock() in next_to_run() adds a significant
overhead, because its called for every packet in busy loop of
pktgen_thread_worker().  (Thomas Graf originally pointed me
at this lock problem).

Removing these two "LOCK" operations should in theory save us approx
16ns (8ns x 2), as illustrated below we do save 16ns when removing
the locks and introducing RCU protection.

Performance data with CLONE_SKB==100000, TX-size=512, rx-usecs=30:
 (single CPU performance, ixgbe 10Gbit/s, E5-2630)
 * Prev   : 5684009 pps --> 175.93ns (1/5684009*10^9)
 * RCU-fix: 6272204 pps --> 159.43ns (1/6272204*10^9)
 * Diff   : +588195 pps --> -16.50ns

To understand this RCU patch, I describe the pktgen thread model
below.

In pktgen there is several kernel threads, but there is only one CPU
running each kernel thread.  Communication with the kernel threads are
done through some thread control flags.  This allow the thread to
change data structures at a know synchronization point, see main
thread func pktgen_thread_worker().

Userspace changes are communicated through proc-file writes.  There
are three types of changes, general control changes "pgctrl"
(func:pgctrl_write), thread changes "kpktgend_X"
(func:pktgen_thread_write), and interface config changes "etcX@N"
(func:pktgen_if_write).

Userspace "pgctrl" and "thread" changes are synchronized via the mutex
pktgen_thread_lock, thus only a single userspace instance can run.
The mutex is taken while the packet generator is running, by pgctrl
"start".  Thus e.g. "add_device" cannot be invoked when pktgen is
running/started.

All "pgctrl" and all "thread" changes, except thread "add_device",
communicate via the thread control flags.  The main problem is the
exception "add_device", that modifies threads "if_list" directly.

Fortunately "add_device" cannot be invoked while pktgen is running.
But there exists a race between "rem_device_all" and "add_device"
(which normally don't occur, because "rem_device_all" waits 125ms
before returning). Background'ing "rem_device_all" and running
"add_device" immediately allow the race to occur.

The race affects the threads (list of devices) "if_list".  The if_lock
is used for protecting this "if_list".  Other readers are given
lock-free access to the list under RCU read sections.

Note, interface config changes (via proc) can occur while pktgen is
running, which worries me a bit.  I'm assuming proc_remove() takes
appropriate locks, to assure no writers exists after proc_remove()
finish.

I've been running a script exercising the race condition (leading me
to fix the proc_remove order), without any issues.  The script also
exercises concurrent proc writes, while the interface config is
getting removed.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid calling set_current_state() inside the busy-loop in
pktgen_thread_worker().  In case of pkt_dev->delay, then it is still
used/enabled in pktgen_xmit() via the spin() call.

The set_current_state(TASK_INTERRUPTIBLE) uses a xchg, which implicit
is LOCK prefixed.  I've measured the asm LOCK operation to take approx
8ns on this E5-2630 CPU.  Performance increase corrolate with this
measurement.

Performance data with CLONE_SKB==100000, rx-usecs=30:
 (single CPU performance, ixgbe 10Gbit/s, E5-2630)
 * Prev:  5454050 pps --> 183.35ns (1/5454050*10^9)
 * Now:   5684009 pps --> 175.93ns (1/5684009*10^9)
 * Diff:  +229959 pps -->  -7.42ns
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly to commit 43279500 ("packet: respect devices with
LLTX flag in direct xmit"), we can basically apply the very same
to pktgen. This will help testing against LLTX devices such as
dummy driver (or others), which only have a single netdevice txq
and would otherwise require locking their txq from pktgen side
while e.g. in dummy case, we would not need any locking. Fix this
by making use of HARD_TX_{UN,}LOCK API, so that NETIF_F_LLTX will
be respected.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similarly as in commit 8e2f1a63 ("packet: fix packet_direct_xmit
for BQL enabled drivers"), we test for __QUEUE_STATE_STACK_XOFF bit
in pktgen's xmit, which would not fully fill the device's TX ring for
BQL drivers that use netdev_tx_sent_queue(). Fix is to use, similarly
as we do in packet sockets, netif_xmit_frozen_or_drv_stopped() test.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The documentation misses a few of the supported flags. Fix this. Also
respect the dependency to CONFIG_XFRM for the IPSEC flag.

Cc: Fan Du <fan.du@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'out' label is just a relict from previous times as pgctrl_write()
had multiple error paths. Get rid of it and simply return right away
on errors.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a privileged user writes an empty string to /proc/net/pktgen/pgctrl
the code for stripping the (then non-existent) '\n' actually writes the
zero byte at index -1 of data[]. The then still uninitialized array will
very likely fail the command matching tests and the pr_warning() at the
end will therefore leak stack bytes to the kernel log.

Fix those issues by simply ensuring we're passed a non-empty string as
the user API apparently expects a trailing '\n' for all commands.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use ether_addr_copy instead of memcpy(a, b, ETH_ALEN) to
save some cycles on arm and powerpc.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

0-DAY kernel build testing backend reported below error:
All error/warnings:

   net/core/pktgen.c: In function 'pktgen_if_write':
>> >> net/core/pktgen.c:1487:10: error: 'struct pktgen_dev' has no member named 'spi'
>> >> net/core/pktgen.c:1488:43: error: 'struct pktgen_dev' has no member named 'spi'

Fix this by encapuslating the code with CONFIG_XFRM.

Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

CC: Fan Du <fan.du@windriver.com>
CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

If user run pktgen plus ipsec by using spi, show spi value
properly when cat /proc/net/pktgen/ethX
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Introduce xfrm_state_lookup_byspi to find user specified by custom
from "pgset spi xxx". Using this scheme, any flow regardless its
saddr/daddr could be transform by SA specified with configurable
spi.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

IPsec tunnel mode encapuslation needs to set outter ip header
with right protocol/ttl/id value with regard to skb->dst->child.

Looking up a rt in a standard way is absolutely wrong for every
packet transmission. In a simple way, construct a dst by setting
neccessary information to make tunnel mode encapuslation working.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

User could set specific SPI value to arm pktgen flow with IPsec
transformation, instead of looking up SA by sadr/daddr. The reaseon
to do so is because current state lookup scheme is both slow and, most
important of all, in fact pktgen doesn't need to match any SA state
addresses information, all it needs is the SA transfromation shell to
do the encapuslation.

And this option also provide user an alternative to using pktgen
test existing SA without creating new ones.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

so /proc/net/xfrm_stat could give user clue about what's
wrong in this process.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

xfrm_state lock protects its state, i.e., VALID/DEAD and statistics,
not the transforming procedure, as both mode/type output functions
are reentrant.

Another issue is state lock can be used in BH context when state timer
alarmed, after transformation in pktgen, update state statistics acquiring
state lock should disabled BH context for a moment. Otherwise LOCKDEP
critisize this:

[   62.354339] pktgen: Packet Generator for packet performance testing. Version: 2.74
[   62.655444]
[   62.655448] =================================
[   62.655451] [ INFO: inconsistent lock state ]
[   62.655455] 3.13.0-rc2+ #70 Not tainted
[   62.655457] ---------------------------------
[   62.655459] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[   62.655463] kpktgend_0/2764 [HC0[0]:SC0[0]:HE1:SE1] takes:
[   62.655466]  (&(&x->lock)->rlock){+.?...}, at: [<ffffffffa00886f6>] pktgen_thread_worker+0x1796/0x1860 [pktgen]
[   62.655479] {IN-SOFTIRQ-W} state was registered at:
[   62.655484]   [<ffffffff8109a61d>] __lock_acquire+0x62d/0x1d70
[   62.655492]   [<ffffffff8109c3c7>] lock_acquire+0x97/0x130
[   62.655498]   [<ffffffff81774af6>] _raw_spin_lock+0x36/0x70
[   62.655505]   [<ffffffff816dc3a3>] xfrm_timer_handler+0x43/0x290
[   62.655511]   [<ffffffff81059437>] __tasklet_hrtimer_trampoline+0x17/0x40
[   62.655519]   [<ffffffff8105a1b7>] tasklet_hi_action+0xd7/0xf0
[   62.655523]   [<ffffffff81059ac6>] __do_softirq+0xe6/0x2d0
[   62.655526]   [<ffffffff8105a026>] irq_exit+0x96/0xc0
[   62.655530]   [<ffffffff8177fd0a>] smp_apic_timer_interrupt+0x4a/0x60
[   62.655537]   [<ffffffff8177e96f>] apic_timer_interrupt+0x6f/0x80
[   62.655541]   [<ffffffff8100b7c6>] arch_cpu_idle+0x26/0x30
[   62.655547]   [<ffffffff810ace28>] cpu_startup_entry+0x88/0x2b0
[   62.655552]   [<ffffffff81761c3c>] rest_init+0xbc/0xd0
[   62.655557]   [<ffffffff81ea5e5e>] start_kernel+0x3c4/0x3d1
[   62.655583]   [<ffffffff81ea55a8>] x86_64_start_reservations+0x2a/0x2c
[   62.655588]   [<ffffffff81ea569f>] x86_64_start_kernel+0xf5/0xfc
[   62.655592] irq event stamp: 77
[   62.655594] hardirqs last  enabled at (77): [<ffffffff810ab7f2>] vprintk_emit+0x1b2/0x520
[   62.655597] hardirqs last disabled at (76): [<ffffffff810ab684>] vprintk_emit+0x44/0x520
[   62.655601] softirqs last  enabled at (22): [<ffffffff81059b57>] __do_softirq+0x177/0x2d0
[   62.655605] softirqs last disabled at (15): [<ffffffff8105a026>] irq_exit+0x96/0xc0
[   62.655609]
[   62.655609] other info that might help us debug this:
[   62.655613]  Possible unsafe locking scenario:
[   62.655613]
[   62.655616]        CPU0
[   62.655617]        ----
[   62.655618]   lock(&(&x->lock)->rlock);
[   62.655622]   <Interrupt>
[   62.655623]     lock(&(&x->lock)->rlock);
[   62.655626]
[   62.655626]  *** DEADLOCK ***
[   62.655626]
[   62.655629] no locks held by kpktgend_0/2764.
[   62.655631]
[   62.655631] stack backtrace:
[   62.655636] CPU: 0 PID: 2764 Comm: kpktgend_0 Not tainted 3.13.0-rc2+ #70
[   62.655638] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[   62.655642]  ffffffff8216b7b0 ffff88001be43ab8 ffffffff8176af37 0000000000000007
[   62.655652]  ffff88001c8d4fc0 ffff88001be43b18 ffffffff81766d78 0000000000000000
[   62.655663]  ffff880000000001 ffff880000000001 ffffffff8101025f ffff88001be43b18
[   62.655671] Call Trace:
[   62.655680]  [<ffffffff8176af37>] dump_stack+0x46/0x58
[   62.655685]  [<ffffffff81766d78>] print_usage_bug+0x1f1/0x202
[   62.655691]  [<ffffffff8101025f>] ? save_stack_trace+0x2f/0x50
[   62.655696]  [<ffffffff81099f8c>] mark_lock+0x28c/0x2f0
[   62.655700]  [<ffffffff810994b0>] ? check_usage_forwards+0x150/0x150
[   62.655704]  [<ffffffff8109a67a>] __lock_acquire+0x68a/0x1d70
[   62.655712]  [<ffffffff81115b09>] ? irq_work_queue+0x69/0xb0
[   62.655717]  [<ffffffff810ab7f2>] ? vprintk_emit+0x1b2/0x520
[   62.655722]  [<ffffffff8109cec5>] ? trace_hardirqs_on_caller+0x105/0x1d0
[   62.655730]  [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen]
[   62.655734]  [<ffffffff8109c3c7>] lock_acquire+0x97/0x130
[   62.655741]  [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen]
[   62.655745]  [<ffffffff81774af6>] _raw_spin_lock+0x36/0x70
[   62.655752]  [<ffffffffa00886f6>] ? pktgen_thread_worker+0x1796/0x1860 [pktgen]
[   62.655758]  [<ffffffffa00886f6>] pktgen_thread_worker+0x1796/0x1860 [pktgen]
[   62.655766]  [<ffffffffa0087a79>] ? pktgen_thread_worker+0xb19/0x1860 [pktgen]
[   62.655771]  [<ffffffff8109cf9d>] ? trace_hardirqs_on+0xd/0x10
[   62.655777]  [<ffffffff81775410>] ? _raw_spin_unlock_irq+0x30/0x40
[   62.655785]  [<ffffffff8151faa0>] ? e1000_clean+0x9d0/0x9d0
[   62.655791]  [<ffffffff81094310>] ? __init_waitqueue_head+0x60/0x60
[   62.655795]  [<ffffffff81094310>] ? __init_waitqueue_head+0x60/0x60
[   62.655800]  [<ffffffffa0086f60>] ? mod_cur_headers+0x7f0/0x7f0 [pktgen]
[   62.655806]  [<ffffffff81078f84>] kthread+0xe4/0x100
[   62.655813]  [<ffffffff81078ea0>] ? flush_kthread_worker+0x170/0x170
[   62.655819]  [<ffffffff8177dc6c>] ret_from_fork+0x7c/0xb0
[   62.655824]  [<ffffffff81078ea0>] ? flush_kthread_worker+0x170/0x170
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

commit a553e4a6 ("[PKTGEN]: IPSEC support")
tried to support IPsec ESP transport transformation for pktgen, but acctually
this doesn't work at all for two reasons(The orignal transformed packet has
bad IPv4 checksum value, as well as wrong auth value, reported by wireshark)

- After transpormation, IPv4 header total length needs update,
  because encrypted payload's length is NOT same as that of plain text.

- After transformation, IPv4 checksum needs re-caculate because of payload
  has been changed.

With this patch, armmed pktgen with below cofiguration, Wireshark is able to
decrypted ESP packet generated by pktgen without any IPv4 checksum error or
auth value error.

pgset "flag IPSEC"
pgset "flows 1"
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes this on PowerPC (at least):

net/core/pktgen.c: In function 'fill_packet_ipv6':
net/core/pktgen.c:2906:3: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration]
   udph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, udplen, IPPROTO_UDP, 0);
   ^
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

UDP checksums are optional, hence pktgen has been omitting them in
favour of performance. The optional flag UDPCSUM enables UDP
checksumming. If the output device supports hardware checksumming
the skb is prepared and marked CHECKSUM_PARTIAL, otherwise the
checksum is generated in software.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently allow for numa-node aware skb allocation only within the
fill_packet_ipv4() path, but not in fill_packet_ipv6(). Consolidate that
code to a common allocation helper to enable numa-node aware skb
allocation for ipv6, and use it in both paths. This also makes both
functions a bit more readable.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_set_network_header() expects an offset based on the data pointer
whereas skb_tail_offset() also includes the headroom. This resulted
in the ip header being written in a wrong location.

Use return values of skb_put() directly and rely on skb->len to
set mac, network, and transport header.

Cc: Simon Horman <horms@verge.net.au>
Cc: Daniel Borkmann <dborkmann@redhat.com>
Assisted-by: NDaniel Borkmann <dborkmann@redhat.com>
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NDaniel Borkmann <dborkmann@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This corrects an regression introduced by "net: Use 16bits for *_headers
fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In
that case skb->tail will be a pointer however skb->network_header is now
an offset.

This patch corrects the problem by adding a wrapper to return skb tail as
an offset regardless of the value of NET_SKBUFF_DATA_USES_OFFSET. It seems
that skb->tail that this offset may be more than 64k and some care has been
taken to treat such cases as an error.
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Supply a function (proc_remove()) to remove a proc entry (and any subtree
rooted there) by proc_dir_entry pointer rather than by name and (optionally)
root dir entry pointer.  This allows us to eliminate all remaining pde->name
accesses outside of procfs.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NGrant Likely <grant.likely@linaro.or>
cc: linux-acpi@vger.kernel.org
cc: openipmi-developer@lists.sourceforge.net
cc: devicetree-discuss@lists.ozlabs.org
cc: linux-pci@vger.kernel.org
cc: netdev@vger.kernel.org
cc: netfilter-devel@vger.kernel.org
cc: alsa-devel@alsa-project.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove duplicate statements by using do-while loop instead of while loop.

- A;
- while (e) {
+ do {
	A;
- }
+ } while (e);
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>