- 29 6月, 2013 2 次提交
-
-
由 Andy Adamson 提交于
The GETDEVICEINFO gdia_maxcount represents all of the data being returned within the GETDEVICEINFO4resok structure and includes the XDR overhead. The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC headers (including security flavor credentials and verifiers). Split out the struct pnfs_device field maxcount which is the gdia_maxcount from the pglen field which is the reply (the total) buffer length. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Fallback should happen only when the request_key() call fails, because this indicates that there was a problem running the nfsidmap program. We shouldn't call the legacy code if the error was elsewhere. Signed-off-by: NBryan Schumaker <bjschuma@netappp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 6月, 2013 1 次提交
-
-
由 Andy Adamson 提交于
We need to ensure that we clear NFS4_SLOT_TBL_DRAINING on the back channel when we're done recovering the session. Regression introduced by commit 774d5f14 (NFSv4.1 Fix a pNFS session draining deadlock) Signed-off-by: NAndy Adamson <andros@netapp.com> [Trond: Changed order to start back-channel first. Minor code cleanup] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org [>=3.10]
-
- 19 6月, 2013 5 次提交
-
-
由 Trond Myklebust 提交于
Give them names that are a bit more consistent with the general pNFS naming scheme. - lo_seg_contained -> pnfs_lseg_range_contained - lo_seg_intersecting -> pnfs_lseg_range_intersecting - cmp_layout -> pnfs_lseg_range_cmp - is_matching_lseg -> pnfs_lseg_range_match Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Also strip off the unnecessary 'inline' declarations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The other protocols don't use it, so make it local to NFSv4, and remove the EXPORT. Also ensure that we only compile in cache_lib.o if we're using the legacy DNS resolver. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Bryan Schumaker <bjschuma@netapp.com>
-
由 Jeff Layton 提交于
We had a report of a reproducible WARNING: [ 1360.039358] ------------[ cut here ]------------ [ 1360.043978] WARNING: at fs/dcache.c:1355 d_set_d_op+0x8d/0xc0() [ 1360.049880] Hardware name: HP Z200 Workstation [ 1360.054308] Modules linked in: nfsv4 nfs dns_resolver fscache nfsd auth_rpcgss nfs_acl lockd sunrpc sg acpi_cpufreq mperf coretemp kvm_intel kvm snd_hda_codec_realtek snd_hda_intel snd_hda_codec hp_wmi crc32c_intel snd_hwdep e1000e snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd sparse_keymap rfkill soundcore serio_raw ptp iTCO_wdt pps_core pcspkr iTCO_vendor_support mei microcode lpc_ich mfd_core wmi xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif radeon i2c_algo_bit drm_kms_helper ttm ahci libahci drm i2c_core libata dm_mirror dm_region_hash dm_log dm_mod [last unloaded: auth_rpcgss] [ 1360.107406] Pid: 8814, comm: mount.nfs4 Tainted: G I -------------- 3.9.0-0.55.el7.x86_64 #1 [ 1360.116771] Call Trace: [ 1360.119219] [<ffffffff810610c0>] warn_slowpath_common+0x70/0xa0 [ 1360.125208] [<ffffffff810611aa>] warn_slowpath_null+0x1a/0x20 [ 1360.131025] [<ffffffff811af46d>] d_set_d_op+0x8d/0xc0 [ 1360.136159] [<ffffffffa05a7d6f>] __rpc_lookup_create_exclusive+0x4f/0x80 [sunrpc] [ 1360.143710] [<ffffffffa05a8cc6>] rpc_mkpipe_dentry+0x86/0x170 [sunrpc] [ 1360.150311] [<ffffffffa062a7b6>] nfs_idmap_new+0x96/0x130 [nfsv4] [ 1360.156475] [<ffffffffa062e7cd>] nfs4_init_client+0xad/0x2d0 [nfsv4] [ 1360.162902] [<ffffffff812f02df>] ? idr_get_empty_slot+0x16f/0x3c0 [ 1360.169062] [<ffffffff812f0582>] ? idr_mark_full+0x52/0x60 [ 1360.174615] [<ffffffff812f0699>] ? idr_alloc+0x79/0xe0 [ 1360.179826] [<ffffffffa0598081>] ? __rpc_init_priority_wait_queue+0x81/0xc0 [sunrpc] [ 1360.187635] [<ffffffffa05980f3>] ? rpc_init_wait_queue+0x13/0x20 [sunrpc] [ 1360.194493] [<ffffffffa05d05da>] nfs_get_client+0x27a/0x350 [nfs] [ 1360.200666] [<ffffffffa062e438>] nfs4_set_client.isra.8+0x78/0x100 [nfsv4] [ 1360.207624] [<ffffffffa062f2f3>] nfs4_create_server+0xf3/0x3a0 [nfsv4] [ 1360.214222] [<ffffffffa06284be>] nfs4_remote_mount+0x2e/0x60 [nfsv4] [ 1360.220644] [<ffffffff8119ea79>] mount_fs+0x39/0x1b0 [ 1360.225691] [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20 [ 1360.231348] [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0 [ 1360.236822] [<ffffffffa0628396>] nfs_do_root_mount+0x86/0xc0 [nfsv4] [ 1360.243246] [<ffffffffa06287b4>] nfs4_try_mount+0x44/0xc0 [nfsv4] [ 1360.249410] [<ffffffffa05d1457>] ? get_nfs_version+0x27/0x80 [nfs] [ 1360.255659] [<ffffffffa05db985>] nfs_fs_mount+0x5c5/0xd10 [nfs] [ 1360.261650] [<ffffffffa05dc550>] ? nfs_clone_super+0x140/0x140 [nfs] [ 1360.268074] [<ffffffffa05da8e0>] ? param_set_portnr+0x60/0x60 [nfs] [ 1360.274406] [<ffffffff8119ea79>] mount_fs+0x39/0x1b0 [ 1360.279443] [<ffffffff81153880>] ? __alloc_percpu+0x10/0x20 [ 1360.285088] [<ffffffff811b7ccf>] vfs_kern_mount+0x5f/0xf0 [ 1360.290556] [<ffffffff811b9f5d>] do_mount+0x1fd/0xa00 [ 1360.295677] [<ffffffff81137dee>] ? __get_free_pages+0xe/0x50 [ 1360.301405] [<ffffffff811b9be6>] ? copy_mount_options+0x36/0x170 [ 1360.307479] [<ffffffff811ba7e3>] sys_mount+0x83/0xc0 [ 1360.312515] [<ffffffff8160ad59>] system_call_fastpath+0x16/0x1b [ 1360.318503] ---[ end trace 8fa1f4cbc36094a7 ]--- The problem is that we're ending up in __rpc_lookup_create_exclusive with a negative dentry that already has d_op set. A little debugging has shown that when we hit this, the d_ops are already set to simple_dentry_operations. I believe that what's happening is that during a mount, idmapd is racing in and doing a lookup of /var/lib/nfs/rpc_pipefs/nfs/clnt???/idmap. Before that dentry reference is released, the kernel races in to create that file and finds the new negative dentry, which already has the d_op set. This patch just avoids setting the d_op if it's already set. simple_dentry_operations and rpc_dentry_operations are functionally equivalent so it shouldn't matter which one it's set to. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Djalal Harouni 提交于
Make sure that NFSv4 SETCLIENTID does not parse the NETID as a format string. Signed-off-by: NDjalal Harouni <tixxdz@opendz.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 6月, 2013 17 次提交
-
-
由 Trond Myklebust 提交于
State recovery currently relies on being able to find a valid nfs_open_context in the inode->open_files list. We therefore need to put the nfs_open_context on the list while we're still protected by the sp->so_reclaim_seqcount in order to avoid reboot races. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Instead of having the callers set ctx->state, do it inside _nfs4_open_and_get_state. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
All the callers have an open_context at this point, and since we always need one in order to do state recovery, it makes sense to use it as the basis for the nfs4_do_open() call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We already check the EXEC access mode in the lower layers. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The RPC_TASK_RUNNING flag will always have been set in rpc_make_runnable() once we get past the test for out_of_line_wait_on_bit() returning ERESTARTSYS. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the rpc_task is asynchronous, it could theoretically finish executing on the workqueue it was assigned by rpc_make_runnable() before we get round to testing RPC_IS_ASYNC() in rpc_execute. In practice, however, all the existing callers hold a reference to the rpc_task, so this can't happen today... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
ctx->cred == ctx->state->owner->so_cred, so let's just use the former. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Use the EXCHGID4_FLAG_BIND_PRINC_STATEID exchange_id flag to enable stateid protection. This means that if we create a stateid using a particular principal, then we must use the same principal if we want to change that state. IOW: if we OPEN a file using a particular credential, then we have to use the same credential in subsequent OPEN_DOWNGRADE, CLOSE, or DELEGRETURN operations that use that stateid. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This is not strictly needed, since get_deviceinfo is not allowed to return NFS4ERR_ACCESS or NFS4ERR_WRONG_CRED, but lets do it anyway for consistency with other pNFS operations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want to use the same credential for reclaim_complete as we used for the exchange_id call. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to use the same credential as was used for the layoutget and/or layoutcommit operations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Ensure that we use the same credential for layoutget, layoutcommit and layoutreturn. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 5月, 2013 1 次提交
-
-
由 Chuck Lever 提交于
Darrick J. Wong <darrick.wong@oracle.com> reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Tested-by: NDarrick J. Wong <darrick.wong@oracle.com> Acked-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 30 5月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
- 24 5月, 2013 1 次提交
-
-
由 Chuck Lever 提交于
Commit 79d852bf "NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE" did not take into account commit 23631227 "NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available". Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 5月, 2013 1 次提交
-
-
由 Trond Myklebust 提交于
The lockless RPC_IS_QUEUED() test in __rpc_execute means that we need to be careful about ordering the calls to rpc_test_and_set_running(task) and rpc_clear_queued(task). If we get the order wrong, then we may end up testing the RPC_TASK_RUNNING flag after __rpc_execute() has looped and changed the state of the rpc_task. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
- 21 5月, 2013 1 次提交
-
-
由 Andy Adamson 提交于
On a CB_RECALL the callback service thread flushes the inode using filemap_flush prior to scheduling the state manager thread to return the delegation. When pNFS is used and I/O has not yet gone to the data server servicing the inode, a LAYOUTGET can preceed the I/O. Unlike the async filemap_flush call, the LAYOUTGET must proceed to completion. If the state manager starts to recover data while the inode flush is sending the LAYOUTGET, a deadlock occurs as the callback service thread holds the single callback session slot until the flushing is done which blocks the state manager thread, and the state manager thread has set the session draining bit which puts the inode flush LAYOUTGET RPC to sleep on the forechannel slot table waitq. Separate the draining of the back channel from the draining of the fore channel by moving the NFS4_SESSION_DRAINING bit from session scope into the fore and back slot tables. Drain the back channel first allowing the LAYOUTGET call to proceed (and fail) so the callback service thread frees the callback slot. Then proceed with draining the forechannel. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 5月, 2013 3 次提交
-
-
由 Trond Myklebust 提交于
This seems to have been overlooked when we did the namespace conversion. If a container is running a legacy version of rpc.gssd then it will be disrupted if the global 'pipe_version' is set by a container running the new version of rpc.gssd. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Recent changes to the NFS security flavour negotiation mean that we have a stronger dependency on rpc.gssd. If the latter is not running, because the user failed to start it, then we time out and mark the container as not having an instance. We then use that information to time out faster the next time. If, on the other hand, the rpc.gssd successfully binds to an rpc_pipe, then we mark the container as having an rpc.gssd instance. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If wait_event_interruptible_timeout() is successful, it returns the number of seconds remaining until the timeout. In that case, we should be retrying the upcall. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 5月, 2013 6 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing/kprobes update from Steven Rostedt: "The majority of these changes are from Masami Hiramatsu bringing kprobes up to par with the latest changes to ftrace (multi buffering and the new function probes). He also discovered and fixed some bugs in doing so. When pulling in his patches, I also found a few minor bugs as well and fixed them. This also includes a compile fix for some archs that select the ring buffer but not tracing. I based this off of the last patch you took from me that fixed the merge conflict error, as that was the commit that had all the changes I needed for this set of changes." * tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Support soft-mode disabling tracing/kprobes: Support ftrace_event_file base multibuffer tracing/kprobes: Pass trace_probe directly from dispatcher tracing/kprobes: Increment probe hit-count even if it is used by perf tracing/kprobes: Use bool for retprobe checker ftrace: Fix function probe when more than one probe is added ftrace: Fix the output of enabled_functions debug file ftrace: Fix locking in register_ftrace_function_probe() tracing: Add helper function trace_create_new_event() to remove duplicate code tracing: Modify soft-mode only if there's no other referrer tracing: Indicate enabled soft-mode in enable file tracing/kprobes: Fix to increment return event probe hit-count ftrace: Cleanup regex_lock and ftrace_lock around hash updating ftrace, kprobes: Fix a deadlock on ftrace_regex_lock ftrace: Have ftrace_regex_write() return either read or error tracing: Return error if register_ftrace_function_probe() fails for event_enable_func() tracing: Don't succeed if event_enable_func did not register anything ring-buffer: Select IRQ_WORK
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull second SCSI update from James "Jaj B" Bottomley: "This is the final round of SCSI patches for the merge window. It consists mostly of driver updates (bnx2fc, ibmfc, fnic, lpfc, be2iscsi, pm80xx, qla4x and ipr). There's also the power management updates that complete the patches in Jens' tree, an iscsi refcounting problem fix from the last pull, some dif handling in scsi_debug fixes, a few nice code cleanups and an error handling busy bug fix." * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (92 commits) [SCSI] qla2xxx: Update firmware link in Kconfig file. [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type [SCSI] pm80xx: thermal, sas controller config and error handling update [SCSI] pm80xx: NCQ error handling changes [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers [SCSI] pm80xx: Changed module name and debug messages update [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files [SCSI] pm80xx: MSI-X implementation for using 64 interrupts [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve [SCSI] pm80xx: Multiple inbound/outbound queue configuration [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC [SCSI] lpfc: fix up Kconfig dependencies [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd [SCSI] sd: change to auto suspend mode [SCSI] sd: use REQ_PM in sd's runtime suspend operation [SCSI] qla4xxx: Fix iocb_cnt calculation in qla4xxx_send_mbox_iocb() [SCSI] ufs: Correct the expected data transfersize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull idle update from Len Brown: "Add support for new Haswell-ULT CPU idle power states" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: initial C8, C9, C10 support tools/power turbostat: display C8, C9, C10 residency
-
git://git.infradead.org/users/eparis/audit由 Linus Torvalds 提交于
Pull audit changes from Eric Paris: "Al used to send pull requests every couple of years but he told me to just start pushing them to you directly. Our touching outside of core audit code is pretty straight forward. A couple of interface changes which hit net/. A simple argument bug calling audit functions in namei.c and the removal of some assembly branch prediction code on ppc" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: fix message spacing printing auid Revert "audit: move kaudit thread start from auditd registration to kaudit init" audit: vfs: fix audit_inode call in O_CREAT case of do_last audit: Make testing for a valid loginuid explicit. audit: fix event coverage of AUDIT_ANOM_LINK audit: use spin_lock in audit_receive_msg to process tty logging audit: do not needlessly take a lock in tty_audit_exit audit: do not needlessly take a spinlock in copy_signal audit: add an option to control logging of passwords with pam_tty_audit audit: use spin_lock_irqsave/restore in audit tty code helper for some session id stuff audit: use a consistent audit helper to log lsm information audit: push loginuid and sessionid processing down audit: stop pushing loginid, uid, sessionid as arguments audit: remove the old depricated kernel interface audit: make validity checking generic audit: allow checking the type of audit message in the user filter audit: fix build break when AUDIT_DEBUG == 2 audit: remove duplicate export of audit_enabled Audit: do not print error when LSMs disabled ...
-
- 11 5月, 2013 1 次提交
-
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd fixes from Bruce Fields: "Small fixes for two bugs and two warnings" * 'for-3.10' of git://linux-nfs.org/~bfields/linux: nfsd: fix oops when legacy_recdir_name_error is passed a -ENOENT error SUNRPC: fix decoding of optional gss-proxy xdr fields SUNRPC: Refactor gssx_dec_option_array() to kill uninitialized warning nfsd4: don't allow owner override on 4.1 CLAIM_FH opens
-