Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

Correct the base address of the Realtek RTL8019AS chip on the Toshiba RBTX4938
board -- this should make the driver work at least when CONFIG_PCI is enabled.
Signed-off-by: NYuri Shpilevsky <yshpilevsky@ru.mvista.com>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] block/elevator.c: remove unused exports
  [PATCH] splice: fix smaller sized splice reads
  [PATCH] Don't inherit ->splice_pipe across forks
  [patch] cleanup: use blk_queue_stopped
  [PATCH] Document online io scheduler switching

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: __NR_sys_splice --> __NR_splice

It seems latest kernel has a wrong/missing __read_mostly implementation
for x86_64

__read_mostly macro should be declared outside of #if CONFIG_X86_VSMP block
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

AMD K7/K8 CPUs only save/restore the FOP/FIP/FDP x87 registers in FXSAVE
when an exception is pending.  This means the value leak through
context switches and allow processes to observe some x87 instruction
state of other processes.

This was actually documented by AMD, but nobody recognized it as
being different from Intel before.

The fix first adds an optimization: instead of unconditionally
calling FNCLEX after each FXSAVE test if ES is pending and skip
it when not needed. Then do a x87 load from a kernel variable to
clear FOP/FIP/FDP.

This means other processes always will only see a constant value
defined by the kernel in their FP state.

I took some pain to make sure to chose a variable that's already
in L1 during context switch to make the overhead of this low.

Also alternative() is used to patch away the new code on CPUs
who don't need it.

Patch for both i386/x86-64.

The problem was discovered originally by Jan Beulich. Richard
Brunner provided the basic code for the workarounds, with contribution
from Jan.

This is CVE-2006-1056

Cc: richard.brunner@amd.com
Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- fix mddev_lock() usage bugs in md_attr_show() and md_attr_store().
  [they did not anticipate the possibility of getting a signal]

- remove mddev_lock_uninterruptible() [unused]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We don't have to #if guard prototypes.

This also fixes a bug observed by Randy Dunlap due to a misspelled
option in the #if.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There was a report of a regression in the ALSA driver for the same
hardware.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update the schedule for the removal of drivers depending on
OBSOLETE_OSS_DRIVER as follows:

- adjust OBSOLETE_OSS_DRIVER dependencie
- from the release of 2.6.16 till the release of 2.6.17:
  approx. two months for users to report problems with the ALSA
  drivers for the same hardware
- after the release of 2.6.17 (and before 2.6.18):
  remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without
  known regressions in the ALSA drivers for the same hardware

Additionally, correct some OBSOLETE_OSS_DRIVER dependencies.
A rationale of the changes is in
  http://lkml.org/lkml/2006/1/28/135Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a test to detect the ICH7 based Core Duo SONY laptops (such as the SZ1)
as type3 models.

Signed-off-by: Arnaud MAZIN < arnaud.mazin@gmail.com>
Acked-by: NStelian Pop <stelian@poppies.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a hang in mpu401_uart.c that can occur when the mpu401 interface
is non-existent or otherwise doesn't respond to commands but we issue IO
anyway.  snd_mpu401_uart_cmd now returns an error code that is passed up
the stack so that an open() will fail immediately in such cases.

Eventually discovered after wine/cxoffice would constantly cause hard
lockups on my desktop immediately after loading (emulating Windows too
well).  Turned out that I'd recently moved my sound cards around and using
/dev/sequencer now talks to a sound card with a broken MPU.

This second version changes -EFAULT to -EIO and frees open resources on
error too.  Test booted and seems to work ok.
Signed-off-by: NJon Masters <jcm@jonmasters.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix for bug #6395:

Fail to resume on Tecra M2 with ADM1032 and Intel 82801DBM

The BIOS of the Tecra M2 doesn't like it when it has to reboot or resume
after the i2c-i801 driver has left the SMBus in PEC mode.  The most simple
fix is to clear the PEC bit after after every transaction.  That's what
this driver was doing up to 2.6.15 (inclusive).

Thanks to Daniele Gaffuri for the very good report.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On the MSI-K8T-NEO2 FIR ( Athlon-64, Socket 939 with VIA-K8T800- Chipset
and onboard Sound,...  ) the BIOS lets you choose "DISABLED" or "AUTO" for
the On-Board Sound Device.

If you add another PCI-Sound-Card the BIOS disables the on-board device.

So far I have a Quirk, that does set the correspondent BIT in the
PCI-registers to enable the soundcard.

But how to ensure that the code is executed ONLY on excactly this kind of
boards (not any other with similar Chipset)?

Cc: Jaroslav Kysela <perex@suse.cz>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Cc: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the dependence on the async_icount structure in the TIOCGICOUNT
macro for Xtensa.  (Thanks Russell and Adrian for pointing this out)
Signed-off-by: NChris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] cs5535_gpio.c: call cdev_del() during module_exit to unmap kobject references and other cleanups

During module unloading, cdev_del() must be called to unmap cdev related
kobject references and other cleanups(such as inode->i_cdev being set to
NULL) which prevents the OOPS upon subsequent loading, usage and unloading
of modules(as seen in the mail thread
http://marc.theaimsgroup.com/?l=linux-kernel&m=114533640609018&w=2).

Also, remove unneeded test of gpio_base.
Signed-off-by: NThayumanavar Sachithanantham <thayumk@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

WARNING: drivers/video/pm2fb.o - Section mismatch: reference
to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd5d)
WARNING: drivers/video/pm2fb.o - Section mismatch: reference
to .init.data: from .text after 'pm2fb_set_par' (at offset 0xd82)

They are caused because pm2fb_set_par() uses lowhsync and lowvsync which
are marked __devinitdata.
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

gather_stats() is called with a spinlock held from check_pte_range.  We
cannot reschedule with a lock held.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add myself as the IPMI maintainer.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In cases where a struct kretprobe's *_handler fields are non-NULL, it is
possible to cause a system crash, due to the possibility of calls ending up
in zombie functions.  Documentation clearly states that unused *_handlers
should be set to NULL, but kprobe users sometimes fail to do so.

Fix it by setting the non-relevant fields of the struct kretprobe to NULL.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NJim Keniston <jkenisto@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes the following unused EXPORT_SYMBOL's:
- elv_requeue_request
- elv_completed_request

They are only used by the block core, hence they need not be exported.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NJens Axboe <axboe@suse.de>

It's really task private, so clear that field on fork after copying
task structure.
Signed-off-by: NJens Axboe <axboe@suse.de>

This cleanup the source to use blk_queue_stopped.
Signed-off-by: NCoywolf Qi Hunt <qiyong@freeforge.net>
Signed-off-by: NJens Axboe <axboe@suse.de>

We added the ability to change a block device's IO elevator scheduler both
at kernel boot and on-the-fly, but we only documented the elevator= boot
parameter.  Add a quick how-to on doing it on the fly.
Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJens Axboe <axboe@suse.de>

Those also break userland regs like following.

   00000000 <sys_chown16>:
      0:	0f b7 44 24 0c       	movzwl 0xc(%esp),%eax
      5:	83 ca ff             	or     $0xffffffff,%edx
      8:	0f b7 4c 24 08       	movzwl 0x8(%esp),%ecx
      d:	66 83 f8 ff          	cmp    $0xffffffff,%ax
     11:	0f 44 c2             	cmove  %edx,%eax
     14:	66 83 f9 ff          	cmp    $0xffffffff,%cx
     18:	0f 45 d1             	cmovne %ecx,%edx
     1b:	89 44 24 0c          	mov    %eax,0xc(%esp)
     1f:	89 54 24 08          	mov    %edx,0x8(%esp)
     23:	e9 fc ff ff ff       	jmp    24 <sys_chown16+0x24>

where the tailcall at the end overwrites the incoming stack-frame.
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
[ I would _really_ like to have a way to tell gcc about calling
  conventions. The "prevent_tail_call()" macro is pretty ugly ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	I've just realised that the RtNetlink code does not check the
permission for SIOCGIWENCODE and SIOCGIWENCODEEXT, which means that
any user can read the encryption keys. The fix is trivial and should
go in 2.6.17 alonside the two other patch I sent you last week.
Signed-off-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The room for the names in bcm43xx_priv_wx_args[] are IFNAMSIZ long and
IFNAMSIZ is defined as 16, so the names in bcm43xx_priv_wx_args should
be 15 characters (16 including the trailing \0). This patch fixes that
for the "set_shortpreambl", "get_shortpreambl", "set_swencryption", and
"get_swencryption" private calls. Patch is against 2.6.17-rc1.
Signed-off-by: NErik Mouw <erik@harddisk-recovery.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This cleans up the bcm43xx sysfs code and makes it compliant
with the unwritten sysfs rules (at least I hope so).
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes coverity bug:
http://marc.theaimsgroup.com/?l=linux-netdev&m=114417628413880&w=2Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch fixes a memory leak spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Use "depends on" to make all bcm43xx driver options be listed
at the same level.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix printk format warnings:
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:456: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:460: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:476: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:480: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘size_t’
drivers/net/wireless/bcm43xx/bcm43xx_dma.c:200: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’
drivers/net/wireless/bcm43xx/bcm43xx_dma.c:311: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’
drivers/net/wireless/bcm43xx/bcm43xx_dma.c:733: warning: format ‘%08x’ expects type ‘unsigned int’, but argument 2 has type ‘dma_addr_t’
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Make softmac report a scan event when scanning has finished, that way
userspace can wait for the event to happen instead of polling for the
results.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Softmac is sending custom events to userspace already, but it
should _really_ be sending the right WEXT events instead. This
patch fixes that.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Below patch allows using iw_mode auto with softmac. bcm43xx forces managed
so this bug wasn't noticed earlier, but this was one of the problems why
zd1211 didn't work earlier.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Seems we forgot to stop the queue while scanning. Better do that so we
don't transmit packets all the time during background scanning.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Below patch was developed after discussion with Daniel Drake who
mentioned to me that wireless tools expect an EAGAIN return from getscan
so that they can wait for the scan to finish before printing out the
results.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>