Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Once L1 loads VMCS12 we enable shadow-vmcs capability and copy all the VMCS12
shadowed fields to the shadow vmcs.  When we release the VMCS12, we also
disable shadow-vmcs capability.
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Synchronize between the VMCS12 software controlled structure and the
processor-specific shadow vmcs
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Introduce a function used to copy fields from the software controlled VMCS12
to the processor-specific shadow vmcs
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Introduce a function used to copy fields from the processor-specific shadow
vmcs to the software controlled VMCS12
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Unmap vmcs12 and release the corresponding shadow vmcs
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Allocate a shadow vmcs used by the processor to shadow part of the fields
stored in the software defined VMCS12 (let L1 access fields without causing
exits). Note we keep a shadow vmcs only for the current vmcs12.  Once a vmcs12
becomes non-current, its shadow vmcs is released.
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

handle_vmon doesn't check if L1 is already in root mode (VMXON
was previously called). This patch adds this missing check and calls
nested_vmx_failValid if VMX is already ON.
We need this check because L0 will allocate the shadow vmcs when L1
executes VMXON and we want to avoid host leaks (due to shadow vmcs
allocation) if L1 executes VMXON repeatedly.
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Refactor existent code so we re-use vmcs12_write_any to copy fields from the
shadow vmcs specified by the link pointer (used by the processor,
implementation-specific) to the VMCS12 software format used by L0 to hold
the fields in L1 memory address space.
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Prepare vmread and vmwrite bitmaps according to a pre-specified list of fields.
These lists are intended to specifiy most frequent accessed fields so we can
minimize the number of fields that are copied from/to the software controlled
VMCS12 format to/from to processor-specific shadow vmcs. The lists were built
measuring the VMCS fields access rate after L2 Ubuntu 12.04 booted when it was
running on top of L1 KVM, also Ubuntu 12.04. Note that during boot there were
additional fields which were frequently modified but they were not added to
these lists because after boot these fields were not longer accessed by L1.
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Add logic required to detect if shadow-vmcs is supported by the
processor. Introduce a new kernel module parameter to specify if L0 should use
shadow vmcs (or not) to run L1.
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Add definitions for all the vmcs control fields/bits
required to enable vmcs-shadowing
Signed-off-by: NAbel Gordon <abelg@il.ibm.com>
Reviewed-by: NOrit Wasserman <owasserm@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Fix the compile error with kvm_vm_ioctl_irq_line.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

->send_IPI_mask is not defined on UP.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

complete_mmio_load writes back the mmio result into the
destination register.  Doing this on a store results in
register corruption.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This patch adds the one_reg interface to get the special instruction
to be used for setting software breakpoint from userspace.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

If guest vcpu is in VM86 mode the vcpu state should be checked as if in
real mode.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

KVM does not use the activity state VMCS field, and does not support
it in nested VMX either (the corresponding bits in the misc VMX feature
MSR are zero).  Fail entry if the activity state is set to anything but
"active".

Since the value will always be the same for L1 and L2, we do not need
to read and write the corresponding VMCS field on L1/L2 transitions,
either.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Commit aa2fbe6d broke the ARM KVM target by introducing a new parameter
to irq handling functions.

Fix the function prototype to get things compiling again and ignore the
parameter just like we did before
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NChristoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If posted interrupt is avaliable, then uses it to inject virtual
interrupt to guest.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Only deliver the posted interrupt when target vcpu is running
and there is no previous interrupt pending in pir.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We already know the trigger mode of a given interrupt when programming
the ioapice entry. So it's not necessary to set it in each interrupt
delivery.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Both TMR and EOI exit bitmap need to be updated when ioapic changed
or vcpu's id/ldr/dfr changed. So use common function instead eoi exit
bitmap specific function.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Detect the posted interrupt feature. If it exists, then set it in vmcs_config.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Posted Interrupt feature requires a special IPI to deliver posted interrupt
to guest. And it should has a high priority so the interrupt will not be
blocked by others.
Normally, the posted interrupt will be consumed by vcpu if target vcpu is
running and transparent to OS. But in some cases, the interrupt will arrive
when target vcpu is scheduled out. And host will see it. So we need to
register a dump handler to handle it.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The "acknowledge interrupt on exit" feature controls processor behavior
for external interrupt acknowledgement. When this control is set, the
processor acknowledges the interrupt controller to acquire the
interrupt vector on VM exit.

After enabling this feature, an interrupt which arrived when target cpu is
running in vmx non-root mode will be handled by vmx handler instead of handler
in idt. Currently, vmx handler only fakes an interrupt stack and jump to idt
table to let real handler to handle it. Further, we will recognize the interrupt
and only delivery the interrupt which not belong to current vcpu through idt table.
The interrupt which belonged to current vcpu will be handled inside vmx handler.
This will reduce the interrupt handle cost of KVM.

Also, interrupt enable logic is changed if this feature is turnning on:
Before this patch, hypervior call local_irq_enable() to enable it directly.
Now IF bit is set on interrupt stack frame, and will be enabled on a return from
interrupt handler if exterrupt interrupt exists. If no external interrupt, still
call local_irq_enable() to enable it.

Refer to Intel SDM volum 3, chapter 33.2.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Current interrupt coalescing logci which only used by RTC has conflict
with Posted Interrupt.
This patch introduces a new mechinism to use eoi to track interrupt:
When delivering an interrupt to vcpu, the pending_eoi set to number of
vcpu that received the interrupt. And decrease it when each vcpu writing
eoi. No subsequent RTC interrupt can deliver to vcpu until all vcpus
write eoi.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Userspace may deliver RTC interrupt without query the status. So we
want to track RTC EOI for this case.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Need the EOI to track interrupt deliver status, so force vmexit
on EOI for rtc interrupt when enabling virtual interrupt delivery.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

restore rtc_status from migration or save/restore
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add a new parameter to know vcpus who received the interrupt.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

rtc_status is used to track RTC interrupt delivery status. The pending_eoi
will be increased by vcpu who received RTC interrupt and will be decreased
when EOI to this interrupt.
Also, we use dest_map to record the destination vcpu to avoid the case that
vcpu who didn't get the RTC interupt, but issued EOI with same vector of RTC
and descreased pending_eoi by mistake.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add vcpu info to ioapic_update_eoi, so we can know which vcpu
issued this EOI.
Signed-off-by: NYang Zhang <yang.z.zhang@Intel.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We only need to update vm_exit_intr_error_code if there is a valid exit
interruption information and it comes with a valid error code.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

If we are entering guest mode, we do not want L0 to interrupt this
vmentry with all its side effects on the vmcs. Therefore, injection
shall be disallowed during L1->L2 transitions, as in the previous
version. However, this check is conceptually independent of
nested_exit_on_intr, so decouple it.

If L1 traps external interrupts, we can kick the guest from L2 to L1,
also just like the previous code worked. But we no longer need to
consider L1's idt_vectoring_info_field. It will always be empty at this
point. Instead, if L2 has pending events, those are now found in the
architectural queues and will, thus, prevent vmx_interrupt_allowed from
being called at all.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The basic idea is to always transfer the pending event injection on
vmexit into the architectural state of the VCPU and then drop it from
there if it turns out that we left L2 to enter L1, i.e. if we enter
prepare_vmcs12.

vmcs12_save_pending_events takes care to transfer pending L0 events into
the queue of L1. That is mandatory as L1 may decide to switch the guest
state completely, invalidating or preserving the pending events for
later injection (including on a different node, once we support
migration).

This concept is based on the rule that a pending vmlaunch/vmresume is
not canceled. Otherwise, we would risk to lose injected events or leak
them into the wrong queues. Encode this rule via a WARN_ON_ONCE at the
entry of nested_vmx_vmexit.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Check if the interrupt or NMI window exit is for L1 by testing if it has
the corresponding controls enabled. This is required when we allow
direct injection from L0 to L2
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>