After a successful page migration by soft offlining, the source page is
not properly freed and it's never reusable even if we unpoison it
afterward.

This is caused by the race between freeing page and setting PG_hwpoison.
In successful soft offlining, the source page is put (and the refcount
becomes 0) by putback_lru_page() in unmap_and_move(), where it's linked
to pagevec and actual freeing back to buddy is delayed.  So if
PG_hwpoison is set for the page before freeing, the freeing does not
functions as expected (in such case freeing aborts in
free_pages_prepare() check.)

This patch tries to make sure to free the source page before setting
PG_hwpoison on it.  To avoid reallocating, the page keeps
MIGRATE_ISOLATE until after setting PG_hwpoison.

This patch also removes obsolete comments about "keeping elevated
refcount" because what they say is not true.  Unlike memory_failure(),
soft_offline_page() uses no special page isolation code, and the
soft-offlined pages have no elevated.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

vwrite() checks for overflow. vread() should do the same thing.

Since vwrite() checks the source buffer address, vread() should check
the destination buffer address.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- check the length of the procfs data before copying it into a fixed
  size array.

- when __parse_numa_zonelist_order() fails, save the error code for
  return.

- 'char*' --> 'char *' coding style fix
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Similar to __pagevec_lru_add, this patch removes the LRU parameter from
__lru_cache_add and lru_cache_add_lru as the caller does not control the
exact LRU the page gets added to.  lru_cache_add_lru gets renamed to
lru_cache_add the name is silly without the lru parameter.  With the
parameter removed, it is required that the caller indicate if they want
the page added to the active or inactive list by setting or clearing
PageActive respectively.

[akpm@linux-foundation.org: Suggested the patch]
[gang.chen@asianux.com: fix used-unintialized warning]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the LRU to add a page to is decided at LRU-add time, remove the
misleading lru parameter from __pagevec_lru_add.  A consequence of this
is that the pagevec_lru_add_file, pagevec_lru_add_anon and similar
helpers are misleading as the caller no longer has direct control over
what LRU the page is added to.  Unused helpers are removed by this patch
and existing users of pagevec_lru_add_file() are converted to use
lru_cache_add_file() directly and use the per-cpu pagevecs instead of
creating their own pagevec.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NRik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a page is on a pagevec then it is !PageLRU and mark_page_accessed()
may fail to move a page to the active list as expected.  Now that the
LRU is selected at LRU drain time, mark pages PageActive if they are on
the local pagevec so it gets moved to the correct list at LRU drain
time.  Using a debugging patch it was found that for a simple git
checkout based workload that pages were never added to the active file
list in practice but with this patch applied they are.

				before   after
LRU Add Active File                  0      750583
LRU Add Active Anon            2640587     2702818
LRU Add Inactive File          8833662     8068353
LRU Add Inactive Anon              207         200

Note that only pages on the local pagevec are considered on purpose.  A
!PageLRU page could be in the process of being released, reclaimed,
migrated or on a remote pagevec that is currently being drained.
Marking it PageActive is vunerable to races where PageLRU and Active
bits are checked at the wrong time.  Page reclaim will trigger
VM_BUG_ONs but depending on when the race hits, it could also free a
PageActive page to the page allocator and trigger a bad_page warning.
Similarly a potential race exists between a per-cpu drain on a pagevec
list and an activation on a remote CPU.

				lru_add_drain_cpu
				__pagevec_lru_add
				  lru = page_lru(page);
mark_page_accessed
  if (PageLRU(page))
    activate_page
  else
    SetPageActive
				  SetPageLRU(page);
				  add_page_to_lru_list(page, lruvec, lru);

In this case a PageActive page is added to the inactivate list and later
the inactive/active stats will get skewed.  While the PageActive checks
in vmscan could be removed and potentially dealt with, a skew in the
statistics would be very difficult to detect.  Hence this patch deals
just with the common case where a page being marked accessed has just
been added to the local pagevec.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mark_page_accessed() cannot activate an inactive page that is located on
an inactive LRU pagevec.  Hints from filesystems may be ignored as a
result.  In preparation for fixing that problem, this patch removes the
per-LRU pagevecs and leaves just one pagevec.  The final LRU the page is
added to is deferred until the pagevec is drained.

This means that fewer pagevecs are available and potentially there is
greater contention on the LRU lock.  However, this only applies in the
case where there is an almost perfect mix of file, anon, active and
inactive pages being added to the LRU.  In practice I expect that we are
adding stream of pages of a particular time and that the changes in
contention will barely be measurable.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrew Perepechko reported a problem whereby pages are being prematurely
evicted as the mark_page_accessed() hint is ignored for pages that are
currently on a pagevec --
http://www.spinics.net/lists/linux-ext4/msg37340.html .

Alexey Lyahkov and Robin Dong have also reported problems recently that
could be due to hot pages reaching the end of the inactive list too
quickly and be reclaimed.

Rather than addressing this on a per-filesystem basis, this series aims
to fix the mark_page_accessed() interface by deferring what LRU a page
is added to pagevec drain time and allowing mark_page_accessed() to call
SetPageActive on a pagevec page.

Patch 1 adds two tracepoints for LRU page activation and insertion. Using
	these processes it's possible to build a model of pages in the
	LRU that can be processed offline.

Patch 2 defers making the decision on what LRU to add a page to until when
	the pagevec is drained.

Patch 3 searches the local pagevec for pages to mark PageActive on
	mark_page_accessed. The changelog explains why only the local
	pagevec is examined.

Patches 4 and 5 tidy up the API.

postmark, a dd-based test and fs-mark both single and threaded mode were
run but none of them showed any performance degradation or gain as a
result of the patch.

Using patch 1, I built a *very* basic model of the LRU to examine
offline what the average age of different page types on the LRU were in
milliseconds.  Of course, capturing the trace distorts the test as it's
written to local disk but it does not matter for the purposes of this
test.  The average age of pages in milliseconds were

				    vanilla deferdrain
Average age mapped anon:               1454       1250
Average age mapped file:             127841     155552
Average age unmapped anon:               85        235
Average age unmapped file:            73633      38884
Average age unmapped buffers:         74054     116155

The LRU activity was mostly files which you'd expect for a dd-based
workload.  Note that the average age of buffer pages is increased by the
series and it is expected this is due to the fact that the buffer pages
are now getting added to the active list when drained from the pagevecs.
Note that the average age of the unmapped file data is decreased as they
are still added to the inactive list and are reclaimed before the
buffers.

There is no guarantee this is a universal win for all workloads and it
would be nice if the filesystem people gave some thought as to whether
this decision is generally a win or a loss.

This patch:

Using these tracepoints it is possible to model LRU activity and the
average residency of pages of different types.  This can be used to
debug problems related to premature reclaim of pages of particular
types.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We want to allocate ELF note segment buffer on the 2nd kernel in vmalloc
space and remap it to user-space in order to reduce the risk that memory
allocation fails on system with huge number of CPUs and so with huge ELF
note segment that exceeds 11-order block size.

Although there's already remap_vmalloc_range for the purpose of
remapping vmalloc memory to user-space, we need to specify user-space
range via vma.
 Mmap on /proc/vmcore needs to remap range across multiple objects, so
the interface that requires vma to cover full range is problematic.

This patch introduces remap_vmalloc_range_partial that receives user-space
range as a pair of base address and size and can be used for mmap on
/proc/vmcore case.

remap_vmalloc_range is rewritten using remap_vmalloc_range_partial.

[akpm@linux-foundation.org: use PAGE_ALIGNED()]
Signed-off-by: NHATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, __find_vmap_area searches for the kernel VM area starting at
a given address.  This patch changes this behavior so that it searches
for the kernel VM area to which the address belongs.  This change is
needed by remap_vmalloc_range_partial to be introduced in later patch
that receives any position of kernel VM area as target address.

This patch changes the condition (addr > va->va_start) to the equivalent
(addr >= va->va_end) by taking advantage of the fact that each kernel VM
area is non-overlapping.
Signed-off-by: NHATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Lisa Mitchell <lisa.mitchell@hp.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mmzone.h documents node_size_lock (which pgdat_resize_lock() locks) as
follows:

        * Must be held any time you expect node_start_pfn, node_present_pages
        * or node_spanned_pages stay constant.  [...]

So actually hold it when we update node_present_pages in __offline_pages().

[akpm@linux-foundation.org: fix build]
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mmzone.h documents node_size_lock (which pgdat_resize_lock() locks) as
follows:

        * Must be held any time you expect node_start_pfn, node_present_pages
        * or node_spanned_pages stay constant.  [...]

So actually hold it when we update node_present_pages in online_pages().
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages.  This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode.  Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.

This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback.  An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode.  By default the
page flags are obeyed.

Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently a zone will only be marked congested if the underlying BDI is
congested but if dirty pages are spread across zones it is possible that
an individual zone is full of dirty pages without being congested.  The
impact is that zone gets scanned very quickly potentially reclaiming
really clean pages.  This patch treats pages marked for immediate
reclaim as congested for the purposes of marking a zone ZONE_CONGESTED
and stalling in wait_iff_congested.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shrink_inactive_list makes decisions on whether to stall based on the
number of dirty pages encountered.  The wait_iff_congested() call in
shrink_page_list does no such thing and it's arbitrary.

This patch moves the decision on whether to set ZONE_CONGESTED and the
wait_iff_congested call into shrink_page_list.  This keeps all the
decisions on whether to stall or not in the one place.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In shrink_page_list a decision may be made to stall and flag a zone as
ZONE_WRITEBACK so that if a large number of unqueued dirty pages are
encountered later then the reclaimer will stall.  Set ZONE_WRITEBACK
before potentially going to sleep so it is noticed sooner.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit "mm: vmscan: Block kswapd if it is encountering pages under
writeback" blocks page reclaim if it encounters pages under writeback
marked for immediate reclaim.  It blocks while pages are still isolated
from the LRU which is unnecessary.  This patch defers the blocking until
after the isolated pages have been processed and tidies up some of the
comments.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Further testing of the "Reduce system disruption due to kswapd"
discovered a few problems.  First and foremost, it's possible for pages
under writeback to be freed which will lead to badness.  Second, as
pages were not being swapped the file LRU was being scanned faster and
clean file pages were being reclaimed.  In some cases this results in
increased read IO to re-read data from disk.  Third, more pages were
being written from kswapd context which can adversly affect IO
performance.  Lastly, it was observed that PageDirty pages are not
necessarily dirty on all filesystems (buffers can be clean while
PageDirty is set and ->writepage generates no IO) and not all
filesystems set PageWriteback when the page is being written (e.g.
ext3).  This disconnect confuses the reclaim stalling logic.  This
follow-up series is aimed at these problems.

The tests were based on three kernels

vanilla:	kernel 3.9 as that is what the current mmotm uses as a baseline
mmotm-20130522	is mmotm as of 22nd May with "Reduce system disruption due to
		kswapd" applied on top as per what should be in Andrew's tree
		right now
lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel

The first test used memcached+memcachetest while some background IO was
in progress as implemented by the parallel IO tests implement in MM
Tests.  memcachetest benchmarks how many operations/second memcached can
service.  It starts with no background IO on a freshly created ext4
filesystem and then re-runs the test with larger amounts of IO in the
background to roughly simulate a large copy in progress.  The
expectation is that the IO should have little or no impact on
memcachetest which is running entirely in memory.

parallelio
                                             3.9.0                       3.9.0                       3.9.0
                                           vanilla          mm1-mmotm-20130522       mm1-lessdisrupt-v7r10
Ops memcachetest-0M             23117.00 (  0.00%)          22780.00 ( -1.46%)          22763.00 ( -1.53%)
Ops memcachetest-715M           23774.00 (  0.00%)          23299.00 ( -2.00%)          22934.00 ( -3.53%)
Ops memcachetest-2385M           4208.00 (  0.00%)          24154.00 (474.00%)          23765.00 (464.76%)
Ops memcachetest-4055M           4104.00 (  0.00%)          25130.00 (512.33%)          24614.00 (499.76%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-715M               12.00 (  0.00%)              7.00 ( 41.67%)              6.00 ( 50.00%)
Ops io-duration-2385M             116.00 (  0.00%)             21.00 ( 81.90%)             21.00 ( 81.90%)
Ops io-duration-4055M             160.00 (  0.00%)             36.00 ( 77.50%)             35.00 ( 78.12%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-715M             140138.00 (  0.00%)             18.00 ( 99.99%)             18.00 ( 99.99%)
Ops swaptotal-2385M            385682.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-4055M            418029.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-715M                   144.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-2385M               134227.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-4055M               125618.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops minorfaults-0M            1536429.00 (  0.00%)        1531632.00 (  0.31%)        1533541.00 (  0.19%)
Ops minorfaults-715M          1786996.00 (  0.00%)        1612148.00 (  9.78%)        1608832.00 (  9.97%)
Ops minorfaults-2385M         1757952.00 (  0.00%)        1614874.00 (  8.14%)        1613541.00 (  8.21%)
Ops minorfaults-4055M         1774460.00 (  0.00%)        1633400.00 (  7.95%)        1630881.00 (  8.09%)
Ops majorfaults-0M                  1.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops majorfaults-715M              184.00 (  0.00%)            167.00 (  9.24%)            166.00 (  9.78%)
Ops majorfaults-2385M           24444.00 (  0.00%)            155.00 ( 99.37%)             93.00 ( 99.62%)
Ops majorfaults-4055M           21357.00 (  0.00%)            147.00 ( 99.31%)            134.00 ( 99.37%)

memcachetest is the transactions/second reported by memcachetest. In
        the vanilla kernel note that performance drops from around
        23K/sec to just over 4K/second when there is 2385M of IO going
        on in the background. With current mmotm, there is no collapse
	in performance and with this follow-up series there is little
	change.

swaptotal is the total amount of swap traffic. With mmotm and the follow-up
	series, the total amount of swapping is much reduced.

                                 3.9.0       3.9.0       3.9.0
                               vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults                  11160152    10706748    10622316
Major Faults                     46305         755         678
Swap Ins                        260249           0           0
Swap Outs                       683860          18          18
Direct pages scanned                 0         678        2520
Kswapd pages scanned           6046108     8814900     1639279
Kswapd pages reclaimed         1081954     1172267     1094635
Direct pages reclaimed               0         566        2304
Kswapd efficiency                  17%         13%         66%
Kswapd velocity               5217.560    7618.953    1414.879
Direct efficiency                 100%         83%         91%
Direct velocity                  0.000       0.586       2.175
Percentage direct scans             0%          0%          0%
Zone normal velocity          5105.086    6824.681     671.158
Zone dma32 velocity            112.473     794.858     745.896
Zone dma velocity                0.000       0.000       0.000
Page writes by reclaim     1929612.000 6861768.000   32821.000
Page writes file               1245752     6861750       32803
Page writes anon                683860          18          18
Page reclaim immediate            7484          40         239
Sector Reads                   1130320       93996       86900
Sector Writes                 13508052    10823500    11804436
Page rescued immediate               0           0           0
Slabs scanned                    33536       27136       18560
Direct inode steals                  0           0           0
Kswapd inode steals               8641        1035           0
Kswapd skipped wait                  0           0           0
THP fault alloc                      8          37          33
THP collapse alloc                 508         552         515
THP splits                          24           1           1
THP fault fallback                   0           0           0
THP collapse fail                    0           0           0

There are a number of observations to make here

1. Swap outs are almost eliminated. Swap ins are 0 indicating that the
   pages swapped were really unused anonymous pages. Related to that,
   major faults are much reduced.

2. kswapd efficiency was impacted by the initial series but with these
   follow-up patches, the efficiency is now at 66% indicating that far
   fewer pages were skipped during scanning due to dirty or writeback
   pages.

3. kswapd velocity is reduced indicating that fewer pages are being scanned
   with the follow-up series as kswapd now stalls when the tail of the
   LRU queue is full of unqueued dirty pages. The stall gives flushers a
   chance to catch-up so kswapd can reclaim clean pages when it wakes

4. In light of Zlatko's recent reports about zone scanning imbalances,
   mmtests now reports scanning velocity on a per-zone basis. With mainline,
   you can see that the scanning activity is dominated by the Normal
   zone with over 45 times more scanning in Normal than the DMA32 zone.
   With the series currently in mmotm, the ratio is slightly better but it
   is still the case that the bulk of scanning is in the highest zone. With
   this follow-up series, the ratio of scanning between the Normal and
   DMA32 zone is roughly equal.

5. As Dave Chinner observed, the current patches in mmotm increased the
   number of pages written from kswapd context which is expected to adversly
   impact IO performance. With the follow-up patches, far fewer pages are
   written from kswapd context than the mainline kernel

6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With
   the follow-up series, there is less slab shrinking activity and no inodes
   were reclaimed.

7. Note that "Sectors Read" is drastically reduced implying that the source
   data being used for the IO is not being aggressively discarded due to
   page reclaim skipping over dirty pages and reclaiming clean pages. Note
   that the reducion in reads could also be due to inode data not being
   re-read from disk after a slab shrink.

                       3.9.0       3.9.0       3.9.0
                     vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz        166.99       32.09       33.44
Mean sda-await        853.64      192.76      185.43
Mean sda-r_await        6.31        9.24        5.97
Mean sda-w_await     2992.81      202.65      192.43
Max  sda-avgqz       1409.91      718.75      698.98
Max  sda-await       6665.74     3538.00     3124.23
Max  sda-r_await       58.96      111.95       58.00
Max  sda-w_await    28458.94     3977.29     3148.61

In light of the changes in writes from reclaim context, the number of
reads and Dave Chinner's concerns about IO performance I took a closer
look at the IO stats for the test disk. Few observations

1. The average queue size is reduced by the initial series and roughly
   the same with this follow up.

2. Average wait times for writes are reduced and as the IO
   is completing faster it at least implies that the gain is because
   flushers are writing the files efficiently instead of page reclaim
   getting in the way.

3. The reduction in maximum write latency is staggering. 28 seconds down
   to 3 seconds.

Jan Kara asked how NFS is affected by all of this. Unstable pages can
be taken into account as one of the patches in the series shows but it
is still the case that filesystems with unusual handling of dirty or
writeback could still be treated better.

Tests like postmark, fsmark and largedd showed up nothing useful. On my test
setup, pages are simply not being written back from reclaim context with or
without the patches and there are no changes in performance. My test setup
probably is just not strong enough network-wise to be really interesting.

I ran a longer-lived memcached test with IO going to NFS instead of a local disk

parallelio
                                             3.9.0                       3.9.0                       3.9.0
                                           vanilla          mm1-mmotm-20130522       mm1-lessdisrupt-v7r10
Ops memcachetest-0M             23323.00 (  0.00%)          23241.00 ( -0.35%)          23321.00 ( -0.01%)
Ops memcachetest-715M           25526.00 (  0.00%)          24763.00 ( -2.99%)          23242.00 ( -8.95%)
Ops memcachetest-2385M           8814.00 (  0.00%)          26924.00 (205.47%)          23521.00 (166.86%)
Ops memcachetest-4055M           5835.00 (  0.00%)          26827.00 (359.76%)          25560.00 (338.05%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-715M               65.00 (  0.00%)             71.00 ( -9.23%)             11.00 ( 83.08%)
Ops io-duration-2385M             129.00 (  0.00%)             94.00 ( 27.13%)             53.00 ( 58.91%)
Ops io-duration-4055M             301.00 (  0.00%)            100.00 ( 66.78%)            108.00 ( 64.12%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-715M              14394.00 (  0.00%)            949.00 ( 93.41%)             63.00 ( 99.56%)
Ops swaptotal-2385M            401483.00 (  0.00%)          24437.00 ( 93.91%)          30118.00 ( 92.50%)
Ops swaptotal-4055M            554123.00 (  0.00%)          35688.00 ( 93.56%)          63082.00 ( 88.62%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-715M                  4522.00 (  0.00%)            560.00 ( 87.62%)             63.00 ( 98.61%)
Ops swapin-2385M               169861.00 (  0.00%)           5026.00 ( 97.04%)          13917.00 ( 91.81%)
Ops swapin-4055M               192374.00 (  0.00%)          10056.00 ( 94.77%)          25729.00 ( 86.63%)
Ops minorfaults-0M            1445969.00 (  0.00%)        1520878.00 ( -5.18%)        1454024.00 ( -0.56%)
Ops minorfaults-715M          1557288.00 (  0.00%)        1528482.00 (  1.85%)        1535776.00 (  1.38%)
Ops minorfaults-2385M         1692896.00 (  0.00%)        1570523.00 (  7.23%)        1559622.00 (  7.87%)
Ops minorfaults-4055M         1654985.00 (  0.00%)        1581456.00 (  4.44%)        1596713.00 (  3.52%)
Ops majorfaults-0M                  0.00 (  0.00%)              1.00 (-99.00%)              0.00 (  0.00%)
Ops majorfaults-715M              763.00 (  0.00%)            265.00 ( 65.27%)             75.00 ( 90.17%)
Ops majorfaults-2385M           23861.00 (  0.00%)            894.00 ( 96.25%)           2189.00 ( 90.83%)
Ops majorfaults-4055M           27210.00 (  0.00%)           1569.00 ( 94.23%)           4088.00 ( 84.98%)

1. Performance does not collapse due to IO which is good. IO is also completing
   faster. Note with mmotm, IO completes in a third of the time and faster again
   with this series applied

2. Swapping is reduced, although not eliminated. The figures for the follow-up
   look bad but it does vary a bit as the stalling is not perfect for nfs
   or filesystems like ext3 with unusual handling of dirty and writeback
   pages

3. There are swapins, particularly with larger amounts of IO indicating
   that active pages are being reclaimed. However, the number of much
   reduced.

                                 3.9.0       3.9.0       3.9.0
                               vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults                  36339175    35025445    35219699
Major Faults                    310964       27108       51887
Swap Ins                       2176399      173069      333316
Swap Outs                      3344050      357228      504824
Direct pages scanned              8972       77283       43242
Kswapd pages scanned          20899983     8939566    14772851
Kswapd pages reclaimed         6193156     5172605     5231026
Direct pages reclaimed            8450       73802       39514
Kswapd efficiency                  29%         57%         35%
Kswapd velocity               3929.743    1847.499    3058.840
Direct efficiency                  94%         95%         91%
Direct velocity                  1.687      15.972       8.954
Percentage direct scans             0%          0%          0%
Zone normal velocity          3721.907     939.103    2185.142
Zone dma32 velocity            209.522     924.368     882.651
Zone dma velocity                0.000       0.000       0.000
Page writes by reclaim     4082185.000  526319.000  537114.000
Page writes file                738135      169091       32290
Page writes anon               3344050      357228      504824
Page reclaim immediate            9524         170     5595843
Sector Reads                   8909900      861192     1483680
Sector Writes                 13428980     1488744     2076800
Page rescued immediate               0           0           0
Slabs scanned                    38016       31744       28672
Direct inode steals                  0           0           0
Kswapd inode steals                424           0           0
Kswapd skipped wait                  0           0           0
THP fault alloc                     14          15         119
THP collapse alloc                1767        1569        1618
THP splits                          30          29          25
THP fault fallback                   0           0           0
THP collapse fail                    8           5           0
Compaction stalls                   17          41         100
Compaction success                   7          31          95
Compaction failures                 10          10           5
Page migrate success              7083       22157       62217
Page migrate failure                 0           0           0
Compaction pages isolated        14847       48758      135830
Compaction migrate scanned       18328       48398      138929
Compaction free scanned        2000255      355827     1720269
Compaction cost                      7          24          68

I guess the main takeaway again is the much reduced page writes
from reclaim context and reduced reads.

                       3.9.0       3.9.0       3.9.0
                     vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz         23.58        0.35        0.44
Mean sda-await        133.47       15.72       15.46
Mean sda-r_await        4.72        4.69        3.95
Mean sda-w_await      507.69       28.40       33.68
Max  sda-avgqz        680.60       12.25       23.14
Max  sda-await       3958.89      221.83      286.22
Max  sda-r_await       63.86       61.23       67.29
Max  sda-w_await    11710.38      883.57     1767.28

And as before, write wait times are much reduced.

This patch:

The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages
encountered, not priority" decides whether to writeback pages from reclaim
context based on the number of dirty pages encountered.  This situation is
flagged too easily and flushers are not given the chance to catch up
resulting in more pages being written from reclaim context and potentially
impacting IO performance.  The check for PageWriteback is also misplaced
as it happens within a PageDirty check which is nonsense as the dirty may
have been cleared for IO.  The accounting is updated very late and pages
that are already under writeback, were reactivated, could not unmapped or
could not be released are all missed.  Similarly, a page is considered
congested for reasons other than being congested and pages that cannot be
written out in the correct context are skipped.  Finally, it considers
stalling and writing back filesystem pages due to encountering dirty
anonymous pages at the tail of the LRU which is dumb.

This patch causes kswapd to begin writing filesystem pages from reclaim
context only if page reclaim found that all filesystem pages at the tail
of the LRU were unqueued dirty pages.  Before it starts writing filesystem
pages, it will stall to give flushers a chance to catch up.  The decision
on whether wait_iff_congested is also now determined by dirty filesystem
pages only.  Congested pages are based on whether the underlying BDI is
congested regardless of the context of the reclaiming process.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

balance_pgdat() is very long and some of the logic can and should be
internal to kswapd_shrink_zone().  Move it so the flow of
balance_pgdat() is marginally easier to follow.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently kswapd checks if it should start writepage as it shrinks each
zone without taking into consideration if the zone is balanced or not.
This is not wrong as such but it does not make much sense either.  This
patch checks once per pgdat scan if kswapd should be writing pages.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Historically, kswapd used to congestion_wait() at higher priorities if
it was not making forward progress.  This made no sense as the failure
to make progress could be completely independent of IO.  It was later
replaced by wait_iff_congested() and removed entirely by commit 258401a6
(mm: don't wait on congested zones in balance_pgdat()) as it was
duplicating logic in shrink_inactive_list().

This is problematic.  If kswapd encounters many pages under writeback
and it continues to scan until it reaches the high watermark then it
will quickly skip over the pages under writeback and reclaim clean young
pages or push applications out to swap.

The use of wait_iff_congested() is not suited to kswapd as it will only
stall if the underlying BDI is really congested or a direct reclaimer
was unable to write to the underlying BDI.  kswapd bypasses the BDI
congestion as it sets PF_SWAPWRITE but even if this was taken into
account then it would cause direct reclaimers to stall on writeback
which is not desirable.

This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is
encountering too many pages under writeback.  If this flag is set and
kswapd encounters a PageReclaim page under writeback then it'll assume
that the LRU lists are being recycled too quickly before IO can complete
and block waiting for some IO to complete.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently kswapd queues dirty pages for writeback if scanning at an
elevated priority but the priority kswapd scans at is not related to the
number of unqueued dirty encountered.  Since commit "mm: vmscan: Flatten
kswapd priority loop", the priority is related to the size of the LRU
and the zone watermark which is no indication as to whether kswapd
should write pages or not.

This patch tracks if an excessive number of unqueued dirty pages are
being encountered at the end of the LRU.  If so, it indicates that dirty
pages are being recycled before flusher threads can clean them and flags
the zone so that kswapd will start writing pages until the zone is
balanced.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Page reclaim at priority 0 will scan the entire LRU as priority 0 is
considered to be a near OOM condition.  Kswapd can reach priority 0
quite easily if it is encountering a large number of pages it cannot
reclaim such as pages under writeback.  When this happens, kswapd
reclaims very aggressively even though there may be no real risk of
allocation failure or OOM.

This patch prevents kswapd reaching priority 0 and trying to reclaim the
world.  Direct reclaimers will still reach priority 0 in the event of an
OOM situation.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the past, kswapd makes a decision on whether to compact memory after
the pgdat was considered balanced.  This more or less worked but it is
late to make such a decision and does not fit well now that kswapd makes
a decision whether to exit the zone scanning loop depending on reclaim
progress.

This patch will compact a pgdat if at least the requested number of
pages were reclaimed from unbalanced zones for a given priority.  If any
zone is currently balanced, kswapd will not call compaction as it is
expected the necessary pages are already available.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kswapd stops raising the scanning priority when at least
SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered
balanced.  It then rechecks if it needs to restart at DEF_PRIORITY and
whether high-order reclaim needs to be reset.  This is not wrong per-se
but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY
may require several restarts before it has scanned enough pages to meet
the high watermark even at 100% efficiency.  This patch irons out the
logic a bit by controlling when priority is raised and removing the
"goto loop_again".

This patch has kswapd raise the scanning priority until it is scanning
enough pages that it could meet the high watermark in one shrink of the
LRU lists if it is able to reclaim at 100% efficiency.  It will not
raise the scanning prioirty higher unless it is failing to reclaim any
pages.

To avoid infinite looping for high-order allocation requests kswapd will
not reclaim for high-order allocations when it has reclaimed at least
twice the number of pages as the allocation request.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simplistically, the anon and file LRU lists are scanned proportionally
depending on the value of vm.swappiness although there are other factors
taken into account by get_scan_count().  The patch "mm: vmscan: Limit
the number of pages kswapd reclaims" limits the number of pages kswapd
reclaims but it breaks this proportional scanning and may evenly shrink
anon/file LRUs regardless of vm.swappiness.

This patch preserves the proportional scanning and reclaim.  It does
mean that kswapd will reclaim more than requested but the number of
pages will be related to the high watermark.

[mhocko@suse.cz: Correct proportional reclaim for memcg and simplify]
[kamezawa.hiroyu@jp.fujitsu.com: Recalculate scan based on target]
[hannes@cmpxchg.org: Account for already scanned pages properly]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series does not fix all the current known problems with reclaim but
it addresses one important swapping bug when there is background IO.

Changelog since V3
 - Drop the slab shrink changes in light of Glaubers series and
   discussions highlighted that there were a number of potential
   problems with the patch.					(mel)
 - Rebased to 3.10-rc1

Changelog since V2
 - Preserve ratio properly for proportional scanning		(kamezawa)

Changelog since V1
 - Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY			(andi)
 - Reformat comment in shrink_page_list				(andi)
 - Clarify some comments					(dhillf)
 - Rework how the proportional scanning is preserved
 - Add PageReclaim check before kswapd starts writeback
 - Reset sc.nr_reclaimed on every full zone scan

Kswapd and page reclaim behaviour has been screwy in one way or the
other for a long time.  Very broadly speaking it worked in the far past
because machines were limited in memory so it did not have that many
pages to scan and it stalled congestion_wait() frequently to prevent it
going completely nuts.  In recent times it has behaved very
unsatisfactorily with some of the problems compounded by the removal of
stall logic and the introduction of transparent hugepage support with
high-order reclaims.

There are many variations of bugs that are rooted in this area.  One
example is reports of a large copy operations or backup causing the
machine to grind to a halt or applications pushed to swap.  Sometimes in
low memory situations a large percentage of memory suddenly gets
reclaimed.  In other cases an application starts and kswapd hits 100%
CPU usage for prolonged periods of time and so on.  There is now talk of
introducing features like an extra free kbytes tunable to work around
aspects of the problem instead of trying to deal with it.  It's
compounded by the problem that it can be very workload and machine
specific.

This series aims at addressing some of the worst of these problems
without attempting to fundmentally alter how page reclaim works.

Patches 1-2 limits the number of pages kswapd reclaims while still obeying
	the anon/file proportion of the LRUs it should be scanning.

Patches 3-4 control how and when kswapd raises its scanning priority and
	deletes the scanning restart logic which is tricky to follow.

Patch 5 notes that it is too easy for kswapd to reach priority 0 when
	scanning and then reclaim the world. Down with that sort of thing.

Patch 6 notes that kswapd starts writeback based on scanning priority which
	is not necessarily related to dirty pages. It will have kswapd
	writeback pages if a number of unqueued dirty pages have been
	recently encountered at the tail of the LRU.

Patch 7 notes that sometimes kswapd should stall waiting on IO to complete
	to reduce LRU churn and the likelihood that it'll reclaim young
	clean pages or push applications to swap. It will cause kswapd
	to block on IO if it detects that pages being reclaimed under
	writeback are recycling through the LRU before the IO completes.

Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they
	are applied.

This was tested using memcached+memcachetest while some background IO
was in progress as implemented by the parallel IO tests implement in MM
Tests.

memcachetest benchmarks how many operations/second memcached can service
and it is run multiple times.  It starts with no background IO and then
re-runs the test with larger amounts of IO in the background to roughly
simulate a large copy in progress.  The expectation is that the IO
should have little or no impact on memcachetest which is running
entirely in memory.

                                        3.10.0-rc1                  3.10.0-rc1
                                           vanilla            lessdisrupt-v4
Ops memcachetest-0M             22155.00 (  0.00%)          22180.00 (  0.11%)
Ops memcachetest-715M           22720.00 (  0.00%)          22355.00 ( -1.61%)
Ops memcachetest-2385M           3939.00 (  0.00%)          23450.00 (495.33%)
Ops memcachetest-4055M           3628.00 (  0.00%)          24341.00 (570.92%)
Ops io-duration-0M                  0.00 (  0.00%)              0.00 (  0.00%)
Ops io-duration-715M               12.00 (  0.00%)              7.00 ( 41.67%)
Ops io-duration-2385M             118.00 (  0.00%)             21.00 ( 82.20%)
Ops io-duration-4055M             162.00 (  0.00%)             36.00 ( 77.78%)
Ops swaptotal-0M                    0.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-715M             140134.00 (  0.00%)             18.00 ( 99.99%)
Ops swaptotal-2385M            392438.00 (  0.00%)              0.00 (  0.00%)
Ops swaptotal-4055M            449037.00 (  0.00%)          27864.00 ( 93.79%)
Ops swapin-0M                       0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-715M                     0.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-2385M               148031.00 (  0.00%)              0.00 (  0.00%)
Ops swapin-4055M               135109.00 (  0.00%)              0.00 (  0.00%)
Ops minorfaults-0M            1529984.00 (  0.00%)        1530235.00 ( -0.02%)
Ops minorfaults-715M          1794168.00 (  0.00%)        1613750.00 ( 10.06%)
Ops minorfaults-2385M         1739813.00 (  0.00%)        1609396.00 (  7.50%)
Ops minorfaults-4055M         1754460.00 (  0.00%)        1614810.00 (  7.96%)
Ops majorfaults-0M                  0.00 (  0.00%)              0.00 (  0.00%)
Ops majorfaults-715M              185.00 (  0.00%)            180.00 (  2.70%)
Ops majorfaults-2385M           24472.00 (  0.00%)            101.00 ( 99.59%)
Ops majorfaults-4055M           22302.00 (  0.00%)            229.00 ( 98.97%)

Note how the vanilla kernels performance collapses when there is enough
IO taking place in the background.  This drop in performance is part of
what users complain of when they start backups.  Note how the swapin and
major fault figures indicate that processes were being pushed to swap
prematurely.  With the series applied, there is no noticable performance
drop and while there is still some swap activity, it's tiny.

20 iterations of this test were run in total and averaged.  Every 5
iterations, additional IO was generated in the background using dd to
measure how the workload was impacted.  The 0M, 715M, 2385M and 4055M
subblock refer to the amount of IO going on in the background at each
iteration.  So memcachetest-2385M is reporting how many
transactions/second memcachetest recorded on average over 5 iterations
while there was 2385M of IO going on in the ground.  There are six
blocks of information reported here

memcachetest is the transactions/second reported by memcachetest. In
	the vanilla kernel note that performance drops from around
	22K/sec to just under 4K/second when there is 2385M of IO going
	on in the background. This is one type of performance collapse
	users complain about if a large cp or backup starts in the
	background

io-duration refers to how long it takes for the background IO to
	complete. It's showing that with the patched kernel that the IO
	completes faster while not interfering with the memcache
	workload

swaptotal is the total amount of swap traffic. With the patched kernel,
	the total amount of swapping is much reduced although it is
	still not zero.

swapin in this case is an indication as to whether we are swap trashing.
	The closer the swapin/swapout ratio is to 1, the worse the
	trashing is.  Note with the patched kernel that there is no swapin
	activity indicating that all the pages swapped were really inactive
	unused pages.

minorfaults are just minor faults. An increased number of minor faults
	can indicate that page reclaim is unmapping the pages but not
	swapping them out before they are faulted back in. With the
	patched kernel, there is only a small change in minor faults

majorfaults are just major faults in the target workload and a high
	number can indicate that a workload is being prematurely
	swapped. With the patched kernel, major faults are much reduced. As
	there are no swapin's recorded so it's not being swapped. The likely
	explanation is that that libraries or configuration files used by
	the workload during startup get paged out by the background IO.

Overall with the series applied, there is no noticable performance drop
due to background IO and while there is still some swap activity, it's
tiny and the lack of swapins imply that the swapped pages were inactive
and unused.

                            3.10.0-rc1  3.10.0-rc1
                               vanilla lessdisrupt-v4
Page Ins                       1234608      101892
Page Outs                     12446272    11810468
Swap Ins                        283406           0
Swap Outs                       698469       27882
Direct pages scanned                 0      136480
Kswapd pages scanned           6266537     5369364
Kswapd pages reclaimed         1088989      930832
Direct pages reclaimed               0      120901
Kswapd efficiency                  17%         17%
Kswapd velocity               5398.371    4635.115
Direct efficiency                 100%         88%
Direct velocity                  0.000     117.817
Percentage direct scans             0%          2%
Page writes by reclaim         1655843     4009929
Page writes file                957374     3982047
Page writes anon                698469       27882
Page reclaim immediate            5245        1745
Page rescued immediate               0           0
Slabs scanned                    33664       25216
Direct inode steals                  0           0
Kswapd inode steals              19409         778
Kswapd skipped wait                  0           0
THP fault alloc                     35          30
THP collapse alloc                 472         401
THP splits                          27          22
THP fault fallback                   0           0
THP collapse fail                    0           1
Compaction stalls                    0           4
Compaction success                   0           0
Compaction failures                  0           4
Page migrate success                 0           0
Page migrate failure                 0           0
Compaction pages isolated            0           0
Compaction migrate scanned           0           0
Compaction free scanned              0           0
Compaction cost                      0           0
NUMA PTE updates                     0           0
NUMA hint faults                     0           0
NUMA hint local faults               0           0
NUMA pages migrated                  0           0
AutoNUMA cost                        0           0

Unfortunately, note that there is a small amount of direct reclaim due to
kswapd no longer reclaiming the world.  ftrace indicates that the direct
reclaim stalls are mostly harmless with the vast bulk of the stalls
incurred by dd

     23 tclsh-3367
     38 memcachetest-13733
     49 memcachetest-12443
     57 tee-3368
   1541 dd-13826
   1981 dd-12539

A consequence of the direct reclaim for dd is that the processes for the
IO workload may show a higher system CPU usage.  There is also a risk that
kswapd not reclaiming the world may mean that it stays awake balancing
zones, does not stall on the appropriate events and continually scans
pages it cannot reclaim consuming CPU.  This will be visible as continued
high CPU usage but in my own tests I only saw a single spike lasting less
than a second and I did not observe any problems related to reclaim while
running the series on my desktop.

This patch:

The number of pages kswapd can reclaim is bound by the number of pages it
scans which is related to the size of the zone and the scanning priority.
In many cases the priority remains low because it's reset every
SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large
number of pages it cannot reclaim, it will raise the priority and
potentially discard a large percentage of the zone as sc->nr_to_reclaim is
ULONG_MAX.  The user-visible effect is a reclaim "spike" where a large
percentage of memory is suddenly freed.  It would be bad enough if this
was just unused memory but because of how anon/file pages are balanced it
is possible that applications get pushed to swap unnecessarily.

This patch limits the number of pages kswapd will reclaim to the high
watermark.  Reclaim will still overshoot due to it not being a hard limit
as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it
prevents kswapd reclaiming the world at higher priorities.  The number of
pages it reclaims is not adjusted for high-order allocations as kswapd
will reclaim excessively if it is to balance zones for high-order
allocations.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: NZlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When memory hotplug is triggered, we call pageset_init() on
per-cpu-pagesets which both contain pages and are in use, causing both the
leakage of those pages and (potentially) bad behaviour if a page is
allocated from a pageset while it is being cleared.

Avoid this by factoring out pageset_set_high_and_batch() (which contains
all needed logic too set a pageset's ->high and ->batch inrespective of
system state) from zone_pageset_init() and using the new
pageset_set_high_and_batch() instead of zone_pageset_init() in
zone_pcp_update().
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, zone_pcp_update() called pageset_set_batch() directly,
essentially assuming that percpu_pagelist_fraction == 0.

Correct this by calling zone_pageset_init(), which chooses the
appropriate ->batch and ->high calculations.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simply moves calculation of the new 'high' value outside the
for_each_possible_cpu() loop, as it does not depend on the cpu.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zone_pcp_update()'s goal is to adjust the ->high and ->mark members of a
percpu pageset based on a zone's ->managed_pages.  We don't need to drain
the entire percpu pageset just to modify these fields.

This lets us avoid calling setup_pageset() (and the draining required to
call it) and instead allows simply setting the fields' values (with some
attention paid to memory barriers to prevent the relationship between
->batch and ->high from being thrown off).

This does change the behavior of zone_pcp_update() as the percpu pagesets
will not be drained when zone_pcp_update() is called (they will end up
being shrunk, not completely drained, later when a 0-order page is freed
in free_hot_cold_page()).
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pcp->batch could change at any point, avoid relying on it being a stable
value.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce pageset_update() to perform a safe transision from one set of
pcp->{batch,high} to a new set using memory barriers.

This ensures that batch is always set to a safe value (1) prior to
updating high, and ensure that high is fully updated before setting the
real value of batch.  It avoids ->batch ever rising above ->high.

Suggested by Gilad Ben-Yossef in these threads:

	https://lkml.org/lkml/2013/4/9/23
	https://lkml.org/lkml/2013/4/10/49

Also reproduces his proposed comment.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: NGilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because we are going to rely upon a careful transision between old and new
->high and ->batch values using memory barriers and will remove
stop_machine(), we need to prevent multiple updaters from interweaving
their memory writes.

Add a simple mutex to protect both update loops.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"Problems" with the current code:

1: there is a lack of synchronization in setting ->high and ->batch in
   percpu_pagelist_fraction_sysctl_handler()

2: stop_machine() in zone_pcp_update() is unnecissary.

3: zone_pcp_update() does not consider the case where
   percpu_pagelist_fraction is non-zero

To fix:

1: add memory barriers, a safe ->batch value, an update side mutex when
   updating ->high and ->batch, and use ACCESS_ONCE() for ->batch users
   that expect a stable value.

2: avoid draining pages in zone_pcp_update(), rely upon the memory
   barriers added to fix #1

3: factor out quite a few functions, and then call the appropriate one.

Note that it results in a change to the behavior of zone_pcp_update(),
which is used by memory_hotplug.  I'm rather certain that I've diserned
(and preserved) the essential behavior (changing ->high and ->batch), and
only eliminated unneeded actions (draining the per cpu pages), but this
may not be the case.

Further note that the draining of pages that previously took place in
zone_pcp_update() occured after repeated draining when attempting to
offline a page, and after the offline has "succeeded".  It appears that
the draining was added to zone_pcp_update() to avoid refactoring
setup_pageset() into 2 funtions.

This patch:

Creates pageset_set_batch() for use in setup_pageset().
pageset_set_batch() imitates the functionality of
setup_pagelist_highmark(), but uses the boot time
(percpu_pagelist_fraction == 0) calculations for determining ->high based
on ->batch.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(*->vm_end - *->vm_start) >> PAGE_SHIFT operation is implemented
as a inline funcion vma_pages() in linux/mm.h, so using it.
Signed-off-by: NLibin <huawei.libin@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>