Fix a null pointer deference by acpi_driver_data() if device is
null.  We should only set cdev and check this is OK after we are
sure device is not null.

Smatch analysis:

drivers/acpi/fan.c:179 acpi_fan_remove() warn: variable dereferenced
  before check 'device' (see line 177)
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The second argument of ACPI driver .remove() operation is only used
by the ACPI processor driver and the value passed to that driver
through it is always available from the given struct acpi_device
object's removal_type field.  For this reason, the second ACPI driver
.remove() argument is in fact useless, so drop it.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NJiang Liu <jiang.liu@huawei.com>
Acked-by: NToshi Kani <toshi.kani@hp.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>

Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

According to compiler warnings, several suspend/resume functions
in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add
#ifdefs to prevent them from being built in that case.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Make the ACPI fan driver define its PM callbacks through
a struct dev_pm_ops object rather than by using legacy PM hooks
in struct acpi_device_ops.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

None of the drivers implementing the ACPI device suspend callback
uses the pm_message_t argument of it, so this argument may be dropped
entirely from that callback.  This will simplify switching the ACPI
bus type to PM handling based on struct dev_pm_ops.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Structs battery_file, acpi_dock_ops, file_operations,
thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops
are not changed in runtime.  It is safe to make them const.
register_hotplug_dock_device() was altered to take const "ops" argument
to respect acpi_dock_ops' const notion.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Use the new function acpi_bus_update_power() for manipulating power
resources used by ACPI fan devices, which allows them to be put into
the right state during initialization and resume.  Consequently,
remove the flags.force_power_state field from struct acpi_device,
which is not necessary any more.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Remove deprecated ACPI Fan driver procfs interface.

The ACPI fan driver (CONFIG_ACPI_FAN) selects
the generic thermal sysfs driver (CONFIG_THERMAL) since 2.6.26,
so new sysfs I/F is available at /sys/class/thermal/cooling_devicecX/
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

commit 934231de fixes an unbalanced
CONFIG_ACPI_PROCFS code block during module initialisation.  This
patch fixes similar issue but for the module exit.
Signed-off-by: NLuis Henriques <luis.henrix@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

The code block braced with CONFIG_ACPI_PROCFS is unblanced. When
CONFIG_ACPI_PROCFS=n, kernel trace will be produced like:

Call Trace:
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c103b02c>] warn_slowpath_common+0x6c/0xc0
 [<c111637d>] ? remove_proc_entry+0x20d/0x290
 [<c103b0c6>] warn_slowpath_fmt+0x26/0x30
 [<c111637d>] remove_proc_entry+0x20d/0x290
 [<c1116bd7>] ? proc_register+0x117/0x1f0
 [<c1116e83>] ? proc_mkdir_mode+0x33/0x50
 [<c14f483c>] ? acpi_fan_init+0x0/0x2c
 [<c14f485f>] acpi_fan_init+0x23/0x2c
 [<c1001123>] do_one_initcall+0x23/0x180
 [<c107dcf7>] ? init_irq_proc+0x67/0x80
 [<c14d43bd>] kernel_init+0x13c/0x20e
 [<c1030e50>] ? schedule_tail+0x20/0x90
 [<c1389e06>] ? syscall_exit+0x5/0x16
 [<c14d4281>] ? kernel_init+0x0/0x20e
 [<c14d4281>] ? kernel_init+0x0/0x20e
 [<c10032f6>] kernel_thread_helper+0x6/0x30
---[ end trace a7919e7f17c0a725 ]---

Then also bracket later error checking code with ACPI_PROCFS
option to avoid mismatch problem.
Signed-off-by: NLiang Li <liang.li@windriver.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This message shows up for each cpu.  Print as debug messages.

[   12.893967] processor ACPI0007:00: registered as cooling_device0
[   12.907838] processor ACPI0007:01: registered as cooling_device1
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: linux-acpi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

Linux/ACPI core files using internal.h all PREFIX "ACPI: ",
however, not all ACPI drivers use/want it -- and they
should not have to #undef PREFIX to define their own.

Add GPL commment to internal.h while we are there.

This does not change any actual console output,
asside from a whitespace fix.
Signed-off-by: NLen Brown <len.brown@intel.com>

Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy
as correctly noted at bug #12454. Someone can lookup entry with NULL
->owner, thus not pinning enything, and release it later resulting
in module refcount underflow.

We can keep ->owner and supply it at registration time like ->proc_fops
and ->data.

But this leaves ->owner as easy-manipulative field (just one C assignment)
and somebody will forget to unpin previous/pin current module when
switching ->owner. ->proc_fops is declared as "const" which should give
some thoughts.

->read_proc/->write_proc were just fixed to not require ->owner for
protection.

rmmod'ed directories will be empty and return "." and ".." -- no harm.
And directories with tricky enough readdir and lookup shouldn't be modular.
We definitely don't want such modular code.

Removing ->owner will also make PDE smaller.

So, let's nuke it.

Kudos to Jeff Layton for reminding about this, let's say, oversight.

http://bugzilla.kernel.org/show_bug.cgi?id=12454Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>

The thermal API currently uses strings to pass values to userspace. This
makes it difficult to use from within the kernel. Change the interface
to use integers and fix up the consumers.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Acked-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Move all the component definitions for drivers to a single shared place,
include/acpi/acpi_drivers.h.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPI_DB_ERROR and ACPI_DB_WARN were removed from ACPICA core.
So replace ACPI_DEBUG_PRINT((ACPI_DB_ERROR, ...) with printk(KERN_ERR PREFIX ...)
and ACPI_DEBUG_PRINT((ACPI_DB_WARN, ...) with printk(KERN_WARNING PREFIX ...)

We do not use ACPI_ERROR/ACPI_WARNING since they're not exported, see
-------------------------------------------------------------
commit 6468463a
Author: Len Brown <len.brown@intel.com>
Date:   Mon Jun 26 23:41:38 2006 -0400

    ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)
Signed-off-by: NLen Brown <len.brown@intel.com>
-------------------------------------------------------------
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Catch attempts to use of acpi_driver_data on pointers of wrong type.

akpm: rewritten to use proper C typechecking and remove the
"function"-used-as-lvalue thing.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

We have the dev_printk() variants for this kind of thing, use them
instead of directly trying to access the bus_id field of struct device.

This is done in order to remove bus_id entirely.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Under /proc/acpi, there is a fan control interface, a user can
set 0 or 3 to /proc/acpi/fan/*/state, 0 denotes D0 state, 3
denotes D3 state, but in current implementation, a user can
set a fan to D1 state by any char excluding '1', '2' and '3'.

For example:

[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on

Obviously, such inputs as "" and "xxxxx" are invalid for fan state.

This patch fixes this issue, it strictly limits fan state only to
accept 0, 1, 2 and 3, any other inputs are invalid.

Before applying this patch, the test result is:

[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "3x" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost acpi]# echo "-1x" > /proc/acpi/fan/C31B/state
[root@localhost acpi]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost acpi]#

After applying this patch, the test result is:

[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "" > /proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "3" > /proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "xxxxx" > /proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "-1x" > /proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost ~]# echo "4" > //proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost ~]# echo "3" > //proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  off
[root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state
[root@localhost ~]# cat /proc/acpi/fan/C31B/state
status:                  on
[root@localhost ~]# echo "3x" > //proc/acpi/fan/C31B/state
-bash: echo: write error: Invalid argument
[root@localhost ~]#
Signed-off-by: NYi Yang <yi.y.yang@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Add correct ->owner to proc_fops to fix reading/module unloading race.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

thermal_cooling_device_register used to return NULL if THERMAL is "n".
As the ACPI fan, processor and video drivers SELECT the generic
thermal in PATCH 01, this is not a problem any more.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Revert commit 1192aeb9 ("ACPI:
drivers/acpi: elide a non-zero test on a result that is never 0")
because it turns out that thermal_cooling_device_register() does
actually return NULL if CONFIG_THERMAL is turned off (then the routine
turns into a dummy inline routine in the header files that returns NULL
unconditionally).

This was found with randconfig testing, causing a crash during bootup:

  initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51()
  Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c()
  BUG: unable to handle kernel NULL pointer dereference at 00000000
  IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd
  *pde = 00000000
  Oops: 0000 [#1]
  Modules linked in:

  Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14)
  EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0
  EIP is at acpi_fan_add+0x7d/0xfd
  EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007
  ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc
   DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000)
  Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda
         b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584
         b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558
  Call Trace:
   [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb
   [<783005d7>] ? driver_probe_device+0x82/0xfc
   [<783007f6>] ? __driver_attach+0x3a/0x70
   [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60
   [<7830048c>] ? driver_attach+0x14/0x16
   [<783007bc>] ? __driver_attach+0x0/0x70
   [<7830006a>] ? bus_add_driver+0x9d/0x1b0
   [<783008c3>] ? driver_register+0x47/0xa3
   [<7813db00>] ? timespec_to_ktime+0x9/0xc
   [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c
   [<78878592>] ? acpi_fan_init+0xd/0x2c
   [<78863656>] ? kernel_init+0xac/0x1f9
   [<788635aa>] ? kernel_init+0x0/0x1f9
   [<78114563>] ? kernel_thread_helper+0x7/0x10
   =======================
  Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e
  EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc
  ---[ end trace 778e504de7e3b1e3 ]---
  Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function thermal_cooling_device_register always returns either a valid
pointer or a value made with ERR_PTR, so a test for non-zero on the result
will always succeed.

The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)

//<smpl>
@a@
expression E, E1;
statement S,S1;
position p;
@@

E = thermal_cooling_device_register(...)
... when != E = E1
if@p (E) S else S1

@n@
position a.p;
expression E,E1;
statement S,S1;
@@

E = NULL
... when != E = E1
if@p (E) S else S1

@depends on !n@
expression E;
statement S,S1;
position a.p;
@@

* if@p (E)
  S else S1
//</smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Need to extract errors using PTR_ERR macro and
process accordingly.  thermal_cooling_device_register
returning NULL means that CONFIG_THERMAL=n and in that
case no need to create symbolic links.
Signed-off-by: NThomas Sujith <sujith.thomas@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

drivers/acpi/fan.c:340: error: ‘acpi_fan_dir’ undeclared (first use in this function)
Signed-off-by: NLen Brown <len.brown@intel.com>

Register ACPI Fan as thermal cooling device.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NThomas Sujith <sujith.thomas@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts commit 93ad7c07.

http://bugzilla.kernel.org/show_bug.cgi?id=9798Signed-off-by: NLen Brown <len.brown@intel.com>

force_power_state was used as a workaround for invalid cached
power state of the device. We do not cache power state, so no need for
workaround.
Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cosmetic only.

Except in a single case, #define ACPI_*_DRIVER_NAME
were invoked 0 or 1 times.
Signed-off-by: NLen Brown <len.brown@intel.com>

It was erroneously used as a description rather than a name.

ie. turn this:

lenb@se7525gp2:/sys> ls bus/acpi/drivers
ACPI AC Adapter Driver  ACPI Embedded Controller Driver  ACPI Power Resource Driver
ACPI Battery Driver     ACPI Fan Driver                  ACPI Processor Driver
ACPI Button Driver      ACPI PCI Interrupt Link Driver   ACPI Thermal Zone Driver
ACPI container driver   ACPI PCI Root Bridge Driver      hpet

into this:

lenb@se7525gp2:~> ls /sys/bus/acpi/drivers
ac  battery  button  container  ec  fan  hpet  pci_link  pci_root  power  processor  thermal
Signed-off-by: NLen Brown <len.brown@intel.com>

cosmetic only

Make "module name" actually match the file name.
Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care.
Fix indentation where Lindent did get confused.
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add ACPI bus_type for Linux driver model.

1.	.shutdown method is added into acpi_driver.ops
	needed by bus_type operations.
2.	remove useless parameter 'int state' in .resume method.
3.	change parameter 'int state'
	to 'pm_message_t state' in .suspend method.

Note:	The new .uevent method mark ACPI drivers by PNPID instead of by name.
	Udev script needs to look for "HWID=" or "COMPTID=" to load
	ACPI drivers as a result.
Signed-off-by: NLi Shaohua <shaohua.li@intel.com>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NPatrick Mochel <mochel@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NPatrick Mochel <mochel@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>