SPC-4 says about the WBUS16 and SYNC bits:

    The meanings of these fields are specific to SPI-5 (see 6.4.3).
    For SCSI transport protocols other than the SCSI Parallel
    Interface, these fields are reserved.

We don't have a SPI fabric module, so we should never set these bits.
(The comment was misleading, since it only mentioned Sync but the
actual code set WBUS16 too).
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Current code sets the peripheral device type to 0x3f == "not present
unknown" for virtual LUN 0 for standard INQUIRY commands, but leaves it
as 0 == "connected direct access block" for VPD INQUIRY commands.  This
is just because the check for LUN 0 only happens in some code paths.

Make our peripheral device type consistent by moving the LUN 0 check
into the common emulate_inquiry() code.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

If the initiator sends us an INQUIRY command with an allocation length
that's shorter than what we want to return, we're simply supposed to
truncate our response and return what the initiator gave us space for,
without signaling any error.  Current target code has various tests that
don't fill out the full response if the buffer is too short and
sometimes return errors incorrectly.

Fix this up by allocating a bounce buffer for INQUIRY responses if we
need to, ie if we have cmd->data_length too small as well as
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC set in cmd->se_cmd_flags -- for most
fabrics, we always allocate at least a full page, but for tcm_loop we
may have a small buffer coming directly from the SCSI stack.

This lets us delete a lot of cmd->data_length checking, and also makes
our INQUIRY handling correct per SPC in a lot more cases.
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds initial support for TMR_ABORT_TASK ops for se_cmd
descriptors using se_sess->sess_cmd_list and se_cmd->cmd_kref counting.

It will perform an explict abort for all outstanding se_cmd ops based
upon tmr->ref_task_tag that have not been set CMD_T_COMPLETE.
It will cancel se_cmd->work and wait for backing I/O to complete before
attempting to send SAM_STAT_TASK_ABORTED and perform
target_put_sess_cmd() to release the referenced descriptor.

It also adds a CMD_T_ABORTED check into transport_complete_task() to
catch the completion from backend I/O that has been aborted, and
updates transport_wait_for_tasks() to allow CMD_T_ABORTED usage with
core_tmr_abort_task() context.
Reported-by: NRoland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch changes target_release_cmd_kref() to make TFO->release_cmd()
call when list_empty(&se_cmd->se_cmd_list) is TRUE.  This is required
for TMR_ABORT_TASK operation where the referenced tag descriptor may
have already been pulled of the session command list.
Reported-by: NRoland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

When TARGET_SCF_ACK_KREF is in use with target_submit_cmd() for
setting the extra acknowledgement reference to se_cmd->cmd_kref,
go ahead and set SCF_ACK_KREF in order to be used later by
abort task.
Reported-by: NRoland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

transport_generic_request_failure() is a wrapper around calling
transport_send_check_condition_and_sense() that is required once
an se_cmd->cmd_kref has been obtained via target_submit_cmd() ->
target_get_sess_cmd().

tcm_qla2xxx currently requires this, and since it's necessary for
other callers using target_submit_cmd() make it exportable now.
Reported-by: NRoland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This code isn't broken per se, but it's scary to look at! It looks like
in the t_data_nents==1 case we're doing both a kunmap and a vunmap,
what's saving us is that t_data_vmap in this case is 0, so vunmap
doesn't do anything.

Return after kunmap, so the handling of the three cases does not overlap.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Now that we use a workqueue for I/O submission there is no need to use
transport_generic_handle_cdb_map any more.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Apply the qla2xxx model of submitting all commands from a workqueue.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This function makes little sense as a separate abstraction as it's deeply
interwinded with the control flow of its only caller.  Merged it into
tcm_loop_queuecommand after factoring out a helper to convert the task
attribute representation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Change ft_send_tm() make use of the new target_submit_tmr helper
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Similar to target_submit_cmd, this function lets fabrics call one function
(albeit with a lot of parameters) instead of 3 or more.

(nab: Add missing return for transport_lookup_tmr_lun failure)
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

transport_generic_free_cmd will end up calling ft_sess_put, so it should
work just the same.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Don't see a reason to differentiate, so drop the fabric specific
switch statement in ft_send_tm() ahead of conversion to use
target_submit_tmr().
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

No dependencies on rest of code, let's get tm_func set asap.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Change the test for if a cmd is a tmr request to checking if
SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags.

Also remove se_tmr_req_cache usage in favor of kzalloc usage,
and make core_tmr_alloc_req() return int + setup se_cmd->se_tmr_req
directly and fix up various fabric module usages

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It's used only for debug output. Debug output may want to make use of
fcp->fc_cdb directly.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Check fc_tm_flags early and call ft_send_tm() right away. Don't need to
set local vars for tm case.

data_len local var now unneeded, remove.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

iscsit_get_lun_for_{cmd,tmr} are unnecessary.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This allows us to use scsilun_to_int without an ugly cast.

Fix up places that use scsilun_to_int on fcp->fc_lun accordingly.

In fc target, this leaves ft_cmd.lun unused, so remove it.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It's in SBC-3.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Instead of

   static struct list_head foo;
   static struct mutex bar;

   ...

   INIT_LIST_HEAD(&foo);
   mutex_init(&bar);

just do

   static LIST_HEAD(foo);
   static DEFINE_MUTEX(bar);

Also remove some superfluous struct list_head and spinlock_t
initialization calls where the variables are already defined using
macros that initialize them.

This saves a decent amount of compiled code too:

    add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-178 (-178)
    function                                     old     new   delta
    target_core_init_configfs                    898     850     -48
    core_scsi3_emulate_pro_preempt              1742    1683     -59
    iscsi_thread_set_init                        159      88     -71
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There is no real limit for task sizes in the iblock driver given that we
can chain bios.  Increase the maximum size to UINT_MAX, and change the
code to submit bios in a smaller batch size to avoid deadlocks when
having more bios in flight than the pool supports.  Also increase the
pool size to always allow multiple tasks to be in flight.

I also had to change the task refcounting to include one reference for
the submission task, which is a standard practice in this kind of code
in Linux (e.g. XFS I/O submission).  This was wrong before, but couldn't
be hit easily.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There is no reason to allocate a struct just to store the host number for
a debug printk in the detach path.  I've simply removed the verbose
debugging given that the calling code thinks the number passed in is
something different from a host ID anyway.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There is no reason to have a flag telling if a command is on the per-lun list,
we can simply do a list_empty check before removing it as long as we're careful
to always use list_del_init.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Replace various atomic_ts used as flags in struct se_cmd with a single
transport_state bitmap that requires t_state_lock to be held for modifications.

In the target core that assumption generally is true, but some recently added
code in the SRP target had to grow new lock calls.  I can't say I like the way
how it messes with the command state directly, but let's leave that for later.

(Re-add missing ib_srpt.c changes that nab dropped..)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc.
The majority of them are regression fixes for stuff that broke during
the merge 3.3 window.

The notable ones are:

* The at91 ata drivers both broke because of an earlier cleanup patch that
  some other patches were based on. Jean-Christophe decided to remove
  the legacy at91_ide driver and fix the new-style at91-pata driver while
  keeping the cleanup patch. I almost rejected the patches for being too
  late and too big but in the end decided to accept them because they
  fix a regression.

* A patch fixing build breakage from the sysdev-to-device conversion
  colliding with other changes touches a number of mach-s3c files.

* b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup"
  is a mechanical change that unfortunately touches a lot of lines
  that should up in the diffstat.

* tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: at91: drop ide driver in favor of the pata one
  pata/at91: use newly introduced SMC accessors
  ARM: at91: add accessor to manage SMC
  ARM: at91:rtc/rtc-at91sam9: ioremap register bank
  ARM: at91: USB AT91 gadget registration for module
  ep93xx: fix build of vision_ep93xx.c
  ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3
  ARM: orion: Fix USB phy for orion5x.
  ARM: orion: Fix Orion5x GPIO regression from MPP cleanup
  ARM: EXYNOS: Add cpu-offset property in gic device tree node
  ARM: EXYNOS: Bring exynos4-dt up to date
  ARM: OMAP3: cm-t35: fix section mismatch warning
  ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains
  ARM: tegra: paz00: fix wrong UART port on mini-pcie plug
  ARM: tegra: paz00: fix wrong SD1 power gpio
  i2c: tegra: Add devexit_p() for remove
  ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board
  ARM: EXYNOS: Correct framebuffer window size on Nuri board
  ARM: SAMSUNG: Fix missing api-change from subsys_interface change
  ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type"
  ...

1) VETH_INFO_PEER netlink attribute needs to have it's size validated,
   from Thomas Graf.

2) 'poll' module option of bnx2x driver crashes the machine, just remove
   it.  From Michal Schmidt.

3) ks8851_mll driver reads the irq number from two places, but only
   initializes one of them, oops.  Use only one location and fix this
   problem, from Jan Weitzel.

4) Fix buffer overrun and unicast sterring bugs in mellanox mlx4 driver,
   from Eugenia Emantayev.

5) Swapped kcalloc() args in RxRPC and mlx4, from Axel Lin.

6) PHY MDIO device name regression fixes from Florian Fainelli.

7) If the wake event IRQ line is different from the netdevice one, we
   have to properly route it to the stmmac interrupt handler.  From
   Francesco Virlinzi.

8) Fix rwlock lock initialization ordering bug in mac80211, from
   Mohammed Shafi Shajakhan.

9) TCP lost_cnt can get out of sync, and in fact go negative, in certain
   circumstances.  Fix the way we specify what sequence range to operate
   on in tcp_sacktag_one() to fix this bug.  From Neal Cardwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  net/ethernet: ks8851_mll fix irq handling
  veth: Enforce minimum size of VETH_INFO_PEER
  stmmac: update the driver version to Feb 2012 (v2)
  stmmac: move hw init in the probe (v2)
  stmmac: request_irq when use an ext wake irq line (v2)
  stmmac: do not discard frame on dribbling bit assert
  ipheth: Add iPhone 4S
  mlx4: add unicast steering entries to resource_tracker
  mlx4: fix QP tree trashing
  mlx4: fix buffer overrun
  3c59x: shorten timer period for slave devices
  netpoll: netpoll_poll_dev() should access dev->flags
  RxRPC: Fix kcalloc parameters swapped
  bnx2x: remove the 'poll' module option
  tcp: fix tcp_shifted_skb() adjustment of lost_cnt_hint for FACK
  ks8851: Fix NOHZ local_softirq_pending 08 warning
  bnx2x: fix bnx2x_storm_stats_update() on big endian
  ixp4xx-eth: fix PHY name to match MDIO bus name
  octeon: fix PHY name to match MDIO bus name
  fec: fix PHY name to match fixed MDIO bus name
  ...

Fixes a bootstrapping issue for some registers when a less commonly used
method for register cache initialisation is used.  Only affects a fairly
small proportion of users that both don't use explicit register defaults
and do use the cache.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix cache defaults initialization from raw cache defaults

Merge tag 'ecryptfs-3.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs

Fixes maximum filename length and filesystem type reporting in statfs() calls
and also fixes stale inode mode bits on eCryptfs inodes after a POSIX ACL was
set on the lower filesystem's inode.

* tag 'ecryptfs-3.3-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
  ecryptfs: remove the second argument of k[un]map_atomic()
  eCryptfs: Copy up lower inode attrs after setting lower xattr
  eCryptfs: Improve statfs reporting

pinctrl fixes for v3.3

* tag 'pinctrl-for-torvalds-20120216' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: restore pin naming

Here are a few more fixes for powerpc.  Some are regressions, the rest
is simple/obvious/nasty enough that I deemed it good to go now.

Here's also step one of deprecating legacy iSeries support: we are
removing it from the main defconfig.

Nobody seems to be using it anymore and the code is nasty to maintain,
(involves horrible hacks in various low level areas of the kernel) so we
plan to actually rip it out at some point.  For now let's just avoid
building it by default.  Stephen will proceed to do the actual removal
later (probably 3.4 or 3.5).

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/perf: power_pmu_start restores incorrect values, breaking frequency events
  powerpc/adb: Use set_current_state()
  powerpc: Disable interrupts early in Program Check
  powerpc: Remove legacy iSeries from ppc64_defconfig
  powerpc/fsl/pci: Fix PCIe fixup regression
  powerpc: Fix kernel log of oops/panic instruction dump

One regression fix for SR-IOV on PPC and a couple of misc fixes from
Yinghai.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
  PCI: Fix pci cardbus removal
  PCI: set pci sriov page size before reading SRIOV BAR
  PCI: workaround hard-wired bus number V2

3 radeon fixes, I have some exynos fixes to push later but I'll queue
them separately once I've looked them over a bit.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix MSI re-arm on rv370+
  drm/radeon/kms/atom: bios scratch reg handling updates
  drm/radeon/kms: drop lock in return path of radeon_fence_count_emitted.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: sha512 - use standard ror64()