Simplify logic to avoid unnecessary variable declaration and assignment.
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515220028.GA15149@embeddedgus

Local variable has_reduced_clock is assigned to a constant value and it is
never updated again. Remove this variable and the dead code it guards.

Addresses-Coverity-ID: 1362230
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515215605.GA14963@embeddedgus

Trivial fix to spelling mistake in seq_printf message.

Fixes: a8b9370f ("drm/i915/guc: Dump the GuC stage descriptor pool in debugfs")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170516092235.28640-1-colin.king@canonical.com

As per BSPEC, high/low switch count to be programmed in
terms of byteclock using exit_zero_count and prep_count.
For Geminilake exit/prep counts are already calculated
in terms of byteclock. This patch calculates high/low
switch count using counts value in byteclock, old calculation
leads to screen flicker/shift issue while resuming from S3/S4.
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1494336565-19185-1-git-send-email-madhav.chauhan@intel.com

Some 64b divides snuck in when doing the prng timing compensation.

Fixes: 47979480 ("drm/i915: Squash repeated awaits on the same fence")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170513094154.3581-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This change is pre-emptively aiming to avoid a potential cause of kernel
logging noise in case some condition were to result in us seeing invalid
OA reports.

The workaround for the OA unit's tail pointer race condition is what
avoids the primary known cause of invalid reports being seen and with
that in place we aren't expecting to see this notice but it can't be
entirely ruled out.

Just in case some condition does lead to the notice then it's likely
that it will be triggered repeatedly while attempting to append a
sequence of reports and depending on the configured OA sampling
frequency that might be a large number of repeat notices.

v2: (Chris) avoid inconsistent warning on throttle with
    printk_ratelimit()
v3: (Matt) init and summarise with stream init/close not driver init/fini
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-9-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This updates the tail pointer race workaround handling to updating the
'aged' pointer before looking to start aging a new one. There's the
possibility that there is already new data available and so we can
immediately start aging a new pointer without having to first wait for a
later hrtimer callback (and then another to age).
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-8-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

A minor improvement to debugging output
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-7-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

There's a HW race condition between OA unit tail pointer register
updates and writes to memory whereby the tail pointer can sometimes get
ahead of what's been written out to the OA buffer so far (in terms of
what's visible to the CPU).

Although this can be observed explicitly while copying reports to
userspace by checking for a zeroed report-id field in tail reports, we
want to account for this earlier, as part of the _oa_buffer_check to
avoid lots of redundant read() attempts.

Previously the driver used to define an effective tail pointer that
lagged the real pointer by a 'tail margin' measured in bytes derived
from OA_TAIL_MARGIN_NSEC and the configured sampling frequency.
Unfortunately this was flawed considering that the OA unit may also
automatically generate non-periodic reports (such as on context switch)
or the OA unit may be enabled without any periodic sampling.

This improves how we define a tail pointer for reading that lags the
real tail pointer by at least %OA_TAIL_MARGIN_NSEC nanoseconds, which
gives enough time for the corresponding reports to become visible to the
CPU.

The driver now maintains two tail pointers:
 1) An 'aging' tail with an associated timestamp that is tracked until we
    can trust the corresponding data is visible to the CPU; at which point
    it is considered 'aged'.
 2) An 'aged' tail that can be used for read()ing.

The two separate pointers let us decouple read()s from tail pointer aging.

The tail pointers are checked and updated at a limited rate within a
hrtimer callback (the same callback that is used for delivering POLLIN
events) and since we're now measuring the wall clock time elapsed since
a given tail pointer was read the mechanism no longer cares about
the OA unit's periodic sampling frequency.

The natural place to handle the tail pointer updates was in
gen7_oa_buffer_is_empty() which is called as part of blocking reads and
the hrtimer callback used for polling, and so this was renamed to
oa_buffer_check() considering the added side effect while checking
whether the buffer contains data.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-6-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This avoids redundantly passing an (inout) head and tail pointer to
gen7_append_oa_reports() from gen7_oa_read which doesn't need to
reference either itself.

Moving the head/tail reads and writes into gen7_append_oa_reports should
have no functional effect except to avoid some redundant head pointer
writes in cases where nothing was copied to userspace.

This is a stepping stone towards updating how the head and tail pointer
state is managed to improve the workaround for the OA unit's tail
pointer race. It reduces the number of places we need to read/write the
head and tail pointers.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-5-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

There's no need for the driver to keep reading back the head pointer
from hardware since the hardware doesn't update it automatically. This
way we can treat any invalid head pointer value as a software/driver
bug instead of spurious hardware behaviour.

This change is also a small stepping stone towards re-working how
the head and tail state is managed as part of an improved workaround
for the tail register race condition.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-4-lionel.g.landwerlin@intel.com

If the function for checking whether there is OA buffer data available
(during a poll or blocking read) has false positives then we want to
avoid a situation where the subsequent read() returns EAGAIN (after
a more accurate check) followed by a poll() immediately reporting
the same false positive POLLIN event and effectively maintaining a
busy loop until there really is data.

This makes sure that we clear the .pollin event status whenever we
return EAGAIN to userspace which will throttle subsequent POLLIN events
and repeated attempts to read to the 5ms intervals of the hrtimer
callback we have.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-3-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

If I'm going to complain about a back-to-front convention then the least
I can do is not muddle the comment up too.
Signed-off-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511154345.962-2-lionel.g.landwerlin@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Some panel will default to zero brightness when turning the
panel off and on again. This patch restores last brightness
level back when panel is turning back on.
Signed-off-by: NPuthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511230225.142870-8-puthik@chromium.org

We should set backlight mode register before set register to
enable the backlight.
Signed-off-by: NPuthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511230225.142870-6-puthik@chromium.org

intel_dp_aux_enable_backlight() assumed that the register
BACKLIGHT_BRIGHTNESS_CONTROL_MODE can only has value 01
(DP_EDP_BACKLIGHT_CONTROL_MODE_PRESET) when initialize.

This patch fixed that by handling all cases of that register.
Signed-off-by: NPuthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511230225.142870-3-puthik@chromium.org

intel_dp_aux_backlight driver should check for the
DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP before enable the driver.
Signed-off-by: NPuthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511230225.142870-2-puthik@chromium.org

If a vma is already bound to a ppgtt, we incorrectly call
allocate_va_range again when doing a PIN_UPDATE, which will result in
over accounting within our paging structures, such that when we do
unbind something we don't actually destroy the structures and end up
inadvertently recycling them. In reality this probably isn't too bad,
but once we start touching PDEs and PDPEs for 64K/2M/1G pages this
apparent recycling will manifest into lots of really, really subtle
bugs.

v2: Fix the testing of vma->flags for aliasing_ppgtt_bind_vma

Fixes: ff685975 ("drm/i915: Move allocate_va_range to GTT")
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512091423.26085-1-chris@chris-wilson.co.uk

During execlist_context_deferred_alloc() we presumed that the context is
uninitialised (we only just allocated the state object for it!) and
chose to optimise away the later call to engine->init_context() if
engine->init_context were NULL. This breaks with GVT's contexts that are
marked as pre-initialised to avoid us annoyingly calling
engine->init_context(). The fix is to not override ce->initialised if it
is already true.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1494497262-24855-1-git-send-email-chuanxiao.dong@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Due to the complex dependencies between workqueues and RCU, which
are not easily detected by lockdep, do not synchronize RCU during
shrinking.

On low-on-memory systems (mem=1G for example), the RCU sync leads
to all system workqueus freezing and unrelated lockdep splats are
displayed according to reports. GIT bisecting done by J. R.
Okajima points to the commit where RCU syncing was extended.

RCU sync gains us very little benefit in real life scenarios
where the amount of memory used by object backing storage is
dominant over the metadata under RCU, so drop it altogether.

 " Yeeeaah, if core could just, go ahead and reclaim RCU
   queues, that'd be great. "

  - Chris Wilson, 2016 (0eafec6d)

v2: More information to commit message.
v3: Remove "grep _rcu_" escapee from i915_gem_shrink_all (Andrea)

Fixes: c053b5a5 ("drm/i915: Don't call synchronize_rcu_expedited under struct_mutex")
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Reported-by: NJ. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NHugh Dickins <hughd@google.com>
Tested-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: http://patchwork.freedesktop.org/patch/msgid/1494414040-11160-1-git-send-email-joonas.lahtinen@linux.intel.com

We are using some scratch registers in MMIO based send function.
Make their base and count flexible in preparation of upcoming
GuC firmware/hardware changes. While around, change cmd len
parameter verification from WARN_ON to GEM_BUG_ON as we don't
need this all the time.

v2: call out WARN/GEM_BUG change in the commit msg (Daniele)
v3: don't overqualify the ints (Chris)
v4: rebase and use proper enum
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Prepare for alternate GuC notification mechanism.
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
[Joonas: Added newlines]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

commit a667fb40
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Thu Dec 15 15:29:44 2016 +0100

    drm/i915: Disable all crtcs during driver unload, v2.

made sure that all crtc's are disabled on driver unload, but only the
following commit made sure all fb's are cleaned up correctly:

commit 9b2104f4
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date:   Tue Feb 21 14:51:40 2017 +0100

    drm/atomic: Make disable_all helper fully disable the crtc.

Finally remove this and add a WARN_ON when vma is set. It should
have been removed by intel_cleanup_plane_fb().
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511082844.13965-2-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We shouldn't inspect crtc->state, instead grab the crtc state.
At this point the hw state verifier should be able to run even if
crtc->state has been updated (which cannot currently happen).
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511082844.13965-1-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We are missing pieces of information that could be useful for GuC
debugging.

v2: Reuse some code (Joonas)

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
[Joonas: Removed extra newline and s/uint32_t/u32/ for checkpatch.pl]
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1494428691-20672-1-git-send-email-oscar.mateo@intel.com

The unconditionally fallback to the blocking wait_for resulted in
impressive fireworks at boot-up on my snb here. Make sure if we set
the slow timeout to 0 that we never ever sleep. The tail of the
callchain was

intel_wait_for_register
-> __intel_wait_for_register_fw
  -> usleep_range
     -> BOOM

It blew up in intel_crt_detect load detection code on the
ADPA_CRT_HOTPLUG_FORCE_TRIGGER in the ADPA register.

v2: Shut up gcc.

v3: Use uninitialized_var() (Chris).

Fixes: 05646543 ("drm/i915: Acquire uncore.lock over intel_uncore_wait_for_register()")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1494429572-15118-1-git-send-email-daniel.vetter@ffwll.ch

It looks like simply writing all the cursor register every single
time might be slightly faster than checking to see of each of
them need to be written. So if any other register apart from
CURPOS needs to be written let's just write all the registers.

CURPOS is left as a special case mainly for 845/865 where we have to
disable the cursor to change many of the cursor parameters. This
introduces a slight chance of the cursor flickering when things get
updated (since we're not currently doing the vblank evade for cursor
updates). If we write CURPOS alone then that obviously can't happen.
And let's follow the same pattern in the i9xx code just for symmetry.
I wasn't able to see a singificant performance difference between
this and just writing all the registers unconditionally.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-16-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Supposedly 845/865 require only 32 byte alignment for CURBASE. Let's
relax the checks to allow that instead of demanding 4KiB alignment.
This will allow cursor panning in 8 pixel units.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-15-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

The cursor plane doesn't have any kind of source offset register, so
the only form of panning possible is via a the base address register.
The alignment required by CURBASE ranges from 32B to 16KiB depending
on the platform. Let's make sure the user didn't ask for something
we can't do.

Obviously this is impossible to hit via the legacy cursor ioctl since
the src offsets are always 0, but via the plane/atomic ioctls the user
can ask for pretty much anything so we have to deal with this.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-14-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

Bspec tells us that gen3 platforms need 4KiB alignment for CURBASE
rather than the 256 byte alignment required by i85x. Let's fix that
and pull the code to determine the correct alignment to a helper
function.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-13-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

IVB introduced the CUR_FBC_CTL register which allows reducing the cursor
height down to 8 lines from the otherwise square cursor dimensions.
Implement support for it. CUR_FBC_CTL can't be used when the cursor
is rotated.

Commandeer the otherwise unused cursor->cursor.size to track the
current value of CUR_FBC_CTL to optimize away redundant CUR_FBC_CTL
writes, and to notice when we need to arm the update via CURBASE if
just CUR_FBC_CTL changes.

v2: Reverse the gen check to make it sane
v3: Only enable CUR_FBC_CTL when cursor is enabled, adapt to
    earlier code changes which means we now actually turn off
    the cursor when we're supposed to unlike v2
v4: Add a comment about rotation vs. CUR_FBC_CTL,
    rebase due to 'dirty' (Chris)
v5: Rebase to the atomic world
    Handle 180 degree rotation
    Add HAS_CUR_FBC()
v6: Rebase
v7: Rebase due to I915_WRITE_FW/uncore.lock
    s/size/fbc_ctl/
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-12-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

The cursor code currently ignores fb->pitches[0] (except when creating
the fb itself), and just uses the cursor_width*4 as the stride. Let's
make sure fb->pitches[0] actually matches what we expect it to be.

We can also relax the stride vs. cursor width relationship on 845/865
since the stride is programmed separately. The only constraint is that
width*cpp doesn't exceed the stride, and that's already been checked
by the core since it makes sure the entire plane fits within the fb.

We can also drop the bo size check as that's already checked when
we create the fb. That is the fb is guaranteed to fit within the bo.

v2: Rebase due to i845_cursor_ctl() and i9xx_cursor_ctl()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-11-ville.syrjala@linux.intel.com

We have the maximum cursor dimensions stored in the mode_config, so
let's just consult that information instead of hardcoding the same
information in multiple places.

We still need to keep some per-platform checks as the limitations are
quite diverse.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-10-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

The 845/865 and 830/855/9xx+ style cursor don't have that
much in common with each other, so let's just split the
.check_plane() hook into two variants as well.

v2: Keep the common stuff in one place (Chris)
v3: s/DRM_FORMAT_MOD_NONE/DRM_FORMAT_MOD_LINEAR/

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-9-ville.syrjala@linux.intel.com

There should be no need to do posting reads between all the cursor
register accessess. Let's just drop them.

v2: Rebase due to I915_WRITE_FW() and uncore.lock
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-8-ville.syrjala@linux.intel.com

Supposedly on some platforms we can get extra atomicity guarantees for
CURPOS if we write it between the CURCNTR and CURBASE. Let's move the
CURPOS handling into the platform specific hooks to make the possible
without having to pass the calculated CURPOS around. And while at it,
do the same for the CURBASE to avoid passing that either.

v2: Use I915_WRITE_FW() and grab uncore.lock
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-7-ville.syrjala@linux.intel.com

Move the CURPOS calculations to seprate function. This will allow
sharing the code between the 845/865 vs. others codepaths when we
otherwise split them apart.

v2: Don't pass intel_plane as it's not needed
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-6-ville.syrjala@linux.intel.com

Move cursor_base, cursor_cntl, and cursor_size from intel_crtc
into intel_plane so that we don't need the crtc for cursor stuff
so much.

Also entirely nuke cursor_addr which IMO doesn't provide any benefit
since it's not actually used by the cursor code itself. I'm not 100%
sure what the SKL+ DDB is code is after by looking at cursor_addr so
I just make it do its checks unconditionally. If that's not correct
then we should likely replace it with somehting like
plane_state->visible.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-5-ville.syrjala@linux.intel.comReviewed-by: NImre Deak <imre.deak@intel.com>

The remaining cursor base address calculations are spread
around into several different locations. Just pull it all
into one place.

v2: Don't pass intel_plane as we don't really need it
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327185546.2977-4-ville.syrjala@linux.intel.com