Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 7月, 2008 1 次提交
  3. 30 6月, 2008 2 次提交
    • T
      ptrace GET/SET FPXREGS broken · 11dbc963
      由 TAKADA Yoshihito 提交于 
      When I update kernel 2.6.25 from 2.6.24, gdb does not work.
On 2.6.25, ptrace(PTRACE_GETFPXREGS, ...) returns ENODEV.

But 2.6.24 kernel's ptrace() returns EIO.
It is issue of compatibility.

I attached test program as pt.c and patch for fix it.

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <errno.h>
#include <sys/ptrace.h>
#include <sys/types.h>

struct user_fxsr_struct {
	unsigned short	cwd;
	unsigned short	swd;
	unsigned short	twd;
	unsigned short	fop;
	long	fip;
	long	fcs;
	long	foo;
	long	fos;
	long	mxcsr;
	long	reserved;
	long	st_space[32];	/* 8*16 bytes for each FP-reg = 128 bytes */
	long	xmm_space[32];	/* 8*16 bytes for each XMM-reg = 128 bytes */
	long	padding[56];
};

int main(void)
{
  pid_t pid;

  pid = fork();

  switch(pid){
  case -1:/*  error */
    break;
  case 0:/*  child */
    child();
    break;
  default:
    parent(pid);
    break;
  }
  return 0;
}

int child(void)
{
  ptrace(PTRACE_TRACEME);
  kill(getpid(), SIGSTOP);
  sleep(10);
  return 0;
}
int parent(pid_t pid)
{
  int ret;
  struct user_fxsr_struct fpxregs;

  ret = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpxregs);
  if(ret < 0){
    printf("%d: %s.\n", errno, strerror(errno));
  }
  kill(pid, SIGCONT);
  wait(pid);
  return 0;
}

/* in the kerel, at kernel/i387.c get_fpxregs() */
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      11dbc963
    • Z
      x86: fix cpu hotplug crash · fcb43042
      由 Zhang, Yanmin 提交于 
      Vegard Nossum reported crashes during cpu hotplug tests:

  http://marc.info/?l=linux-kernel&m=121413950227884&w=4

In function _cpu_up, the panic happens when calling
__raw_notifier_call_chain at the second time. Kernel doesn't panic when
calling it at the first time. If just say because of nr_cpu_ids, that's
not right.

By checking the source code, I found that function do_boot_cpu is the culprit.
Consider below call chain:
 _cpu_up=>__cpu_up=>smp_ops.cpu_up=>native_cpu_up=>do_boot_cpu.

So do_boot_cpu is called in the end. In do_boot_cpu, if
boot_error==true, cpu_clear(cpu, cpu_possible_map) is executed. So later
on, when _cpu_up calls __raw_notifier_call_chain at the second time to
report CPU_UP_CANCELED, because this cpu is already cleared from
cpu_possible_map, get_cpu_sysdev returns NULL.

Many resources are related to cpu_possible_map, so it's better not to
change it.

Below patch against 2.6.26-rc7 fixes it by removing the bit clearing in
cpu_possible_map.
Signed-off-by: NZhang Yanmin <yanmin_zhang@linux.intel.com>
Tested-by: NVegard Nossum <vegard.nossum@gmail.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fcb43042
  5. 26 6月, 2008 2 次提交
  7. 24 6月, 2008 1 次提交
  9. 20 6月, 2008 4 次提交
    • J
      xen: don't drop NX bit · ebb9cfe2
      由 Jeremy Fitzhardinge 提交于 
      Because NX is now enforced properly, we must put the hypercall page
into the .text segment so that it is executable.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ebb9cfe2
    • J
      xen: mask unwanted pte bits in __supported_pte_mask · 05345b0f
      由 Jeremy Fitzhardinge 提交于 
      [ Stable: this isn't a bugfix in itself, but it's a pre-requiste
  for "xen: don't drop NX bit" ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      05345b0f
    • I
      xen: Use wmb instead of rmb in xen_evtchn_do_upcall(). · 46539383
      由 Isaku Yamahata 提交于 
      This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg.
Use wmb instead of rmb to enforce ordering between
evtchn_upcall_pending and evtchn_pending_sel stores
in xen_evtchn_do_upcall().

Cc: Samuel Thibault <samuel.thibault@eu.citrix.com>
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      46539383
    • S
      x86: fix NULL pointer deref in __switch_to · 54481cf8
      由 Suresh Siddha 提交于 
      I am able to reproduce the oops reported by Simon in __switch_to() with
lguest.

My debug showed that there is at least one lguest specific
issue (which should be present in 2.6.25 and before aswell) and it got
exposed with a kernel oops with the recent fpu dynamic allocation patches.

In addition to the previous possible scenario (with fpu_counter), in the
presence of lguest, it is possible that the cpu's TS bit it still set and the
lguest launcher task's thread_info has TS_USEDFPU still set.

This is because of the way the lguest launcher handling the guest's TS bit.
(look at lguest_set_ts() in lguest_arch_run_guest()). This can result
in a DNA fault while doing unlazy_fpu() in __switch_to(). This will
end up causing a DNA fault in the context of new process thats
getting context switched in (as opossed to handling DNA fault in the context
of lguest launcher/helper process).

This is wrong in both pre and post 2.6.25 kernels. In the recent
2.6.26-rc series, this is showing up as NULL pointer dereferences or
sleeping function called from atomic context(__switch_to()), as
we free and dynamically allocate the FPU context for the newly
created threads. Older kernels might show some FPU corruption for processes
running inside of lguest.

With the appended patch, my test system is running for more than 50 mins
now. So atleast some of your oops (hopefully all!) should get fixed.
Please give it a try. I will spend more time with this fix tomorrow.
Reported-by: NSimon Holm Thøgersen <odie@cs.aau.dk>
Reported-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      54481cf8
  11. 19 6月, 2008 22 次提交
  13. 18 6月, 2008 8 次提交
    • P
      [POWERPC] Clear sub-page HPTE present bits when demoting page size · 65ba6cdc
      由 Paul Mackerras 提交于 
      When we demote a slice from 64k to 4k, and we are about to insert an
HPTE for a 4k subpage and we notice that there is an existing 64k
HPTE, we first invalidate that HPTE before inserting the new 4k
subpage HPTE.  Since the bits that encode which hash bucket the old
HPTE was in overlap with the bits that encode which of the 16 subpages
have HPTEs, we need to clear out the subpage HPTE-present bits before
starting to insert HPTEs for the 4k subpages.  If we don't do that, we
can erroneously think that a subpage already has an HPTE when it
doesn't.

That in itself wouldn't be such a problem except that when we go to
update the HPTE that we think is present on machines with a
hypervisor, the hypervisor can tell us that the HPTE we think is there
is actually there even though it isn't, which can lead to a process
getting stuck in a loop, continually faulting.  The reason for the
confusion is that the AVPN (abbreviated virtual page number) we are
looking for in the HPTE for a 4k subpage can actually match the AVPN
in a stale HPTE for another 64k page.  For example, the HPTE for
the 4k subpage at 0x84000f000 will be in the same hash bucket and have
the same AVPN as the HPTE for the 64k page at 0x8400f0000.

This fixes the code to clear out the subpage HPTE-present bits.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      65ba6cdc
    • J
      [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector · b17879f7
      由 Josh Boyer 提交于 
      A recent commit added support for the new 440x6 and 464 cores that have the
added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the
TLBs.  The new bits were cleared in the finish_tlb_load function, however a
similar bit of code was missed in the DataStorage interrupt vector.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      b17879f7
    • P
      netlink: genl: fix circular locking · 6d1a3fb5
      由 Patrick McHardy 提交于 
      genetlink has a circular locking dependency when dumping the registered
families:

- dump start:
genl_rcv()            : take genl_mutex
genl_rcv_msg()        : call netlink_dump_start() while holding genl_mutex
netlink_dump_start(),
netlink_dump()        : take nlk->cb_mutex
ctrl_dumpfamily()     : try to detect this case and not take genl_mutex a
                        second time

- dump continuance:
netlink_rcv()         : call netlink_dump
netlink_dump          : take nlk->cb_mutex
ctrl_dumpfamily()     : take genl_mutex

Register genl_lock as callback mutex with netlink to fix this. This slightly
widens an already existing module unload race, the genl ops used during the
dump might go away when the module is unloaded. Thomas Graf is working on a
seperate fix for this.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6d1a3fb5
    • D
      Revert "mac80211: Use skb_header_cloned() on TX path." · 3a5be7d4
      由 David S. Miller 提交于 
      This reverts commit 608961a5.

The problem is that the mac80211 stack not only needs to be able to
muck with the link-level headers, it also might need to mangle all of
the packet data if doing sw wireless encryption.

This fixes kernel bugzilla #10903.  Thanks to Didier Raboud (for the
bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for
bringing this bisection analysis to my attention), and Ilpo (for
trying to analyze this purely from the TCP side).

In 2.6.27 we can take another stab at this, by using something like
skb_cow_data() when the TX path of mac80211 ends up with a non-NULL
tx->key.  The ESP protocol code in the IPSEC stack can be used as a
model for implementation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3a5be7d4
    • R
      af_unix: fix 'poll for write'/ connected DGRAM sockets · 3c73419c
      由 Rainer Weikusat 提交于 
      The unix_dgram_sendmsg routine implements a (somewhat crude)
form of receiver-imposed flow control by comparing the length of the
receive queue of the 'peer socket' with the max_ack_backlog value
stored in the corresponding sock structure, either blocking
the thread which caused the send-routine to be called or returning
EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET
sockets. The poll-implementation for these socket types is
datagram_poll from core/datagram.c. A socket is deemed to be writeable
by this routine when the memory presently consumed by datagrams
owned by it is less than the configured socket send buffer size. This
is always wrong for connected PF_UNIX non-stream sockets when the
abovementioned receive queue is currently considered to be full.
'poll' will then return, indicating that the socket is writeable, but
a subsequent write result in EAGAIN, effectively causing an
(usual) application to 'poll for writeability by repeated send request
with O_NONBLOCK set' until it has consumed its time quantum.

The change below uses a suitably modified variant of the datagram_poll
routines for both type of PF_UNIX sockets, which tests if the
recv-queue of the peer a socket is connected to is presently
considered to be 'full' as part of the 'is this socket
writeable'-checking code. The socket being polled is additionally
put onto the peer_wait wait queue associated with its peer, because the
unix_dgram_sendmsg routine does a wake up on this queue after a
datagram was received and the 'other wakeup call' is done implicitly
as part of skb destruction, meaning, a process blocked in poll
because of a full peer receive queue could otherwise sleep forever
if no datagram owned by its socket was already sitting on this queue.
Among this change is a small (inline) helper routine named
'unix_recvq_full', which consolidates the actual testing code (in three
different places) into a single location.
Signed-off-by: NRainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3c73419c
    • D
      Merge branch 'davem-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 · 4552e119
      由 David S. Miller 提交于
      4552e119
    • A
      tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set · f09f7ee2
      由 Ang Way Chuang 提交于 
      By default, tun.c running in TUN_TUN_DEV mode will set the protocol of
packet to IPv4 if TUN_NO_PI is set. My program failed to work when I
assumed that the driver will check the first nibble of packet,
determine IP version and set the appropriate protocol.
Signed-off-by: NAng Way Chuang <wcang@nav6.org>
Acked-by: NMax Krasnyansky <maxk@qualcomm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f09f7ee2
    • R
      atl1: relax eeprom mac address error check · 58c7821c
      由 Radu Cristescu 提交于 
      The atl1 driver tries to determine the MAC address thusly:

	- If an EEPROM exists, read the MAC address from EEPROM and
	  validate it.
	- If an EEPROM doesn't exist, try to read a MAC address from
	  SPI flash.
	- If that fails, try to read a MAC address directly from the
	  MAC Station Address register.
	- If that fails, assign a random MAC address provided by the
	  kernel.

We now have a report of a system fitted with an EEPROM containing all
zeros where we expect the MAC address to be, and we currently handle
this as an error condition.  Turns out, on this system the BIOS writes
a valid MAC address to the NIC's MAC Station Address register, but we
never try to read it because we return an error when we find the all-
zeros address in EEPROM.

This patch relaxes the error check and continues looking for a MAC
address even if it finds an illegal one in EEPROM.
Signed-off-by: NRadu Cristescu <advantis@gmx.net>
Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      58c7821c