Pull ubi/ubifs fixes from Richard Weinberger:
 "This contains fixes for issues in both UBI and UBIFS:

   - A regression wrt overlayfs, introduced in -rc2.
   - An UBI issue, found by Dan Carpenter's static checker"

* tag 'upstream-4.9-rc3' of git://git.infradead.org/linux-ubifs:
  ubifs: Fix regression in ubifs_readdir()
  ubi: fastmap: Fix add_vol() return value test in ubi_attach_fastmap()

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc driver fixes for reported issues.

  The "biggest" are two binder fixes for reported issues that have been
  shipping in Android phones for a while now, the others are various
  fixes for reported problems.

  And there's a MAINTAINERS update for good measure.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: Add entry for genwqe driver
  VMCI: Doorbell create and destroy fixes
  GenWQE: Fix bad page access during abort of resource allocation
  vme: vme_get_size potentially returning incorrect value on failure
  extcon: qcom-spmi-misc: Sync the extcon state on interrupt
  hv: do not lose pending heartbeat vmbus packets
  mei: txe: don't clean an unprocessed interrupt cause.
  ANDROID: binder: Clear binder and cookie when setting handle in flat binder struct
  ANDROID: binder: Add strong ref checks

Merge tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes

Correct regulator handling on Rockchip arm64 boards to make
bind/unbind calls work correctly and remove a sdio-only
property from non-sdio mmc hosts, that accidentially was
added there.

* tag 'v4.9-rockchip-dts64-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux into fixes

This pull request contains a single fix for Broadcom ARM64-based SoCs:

- Ray adds the required bus width and OOB sector size properties to the
  Northstar 2 SVK reference board in order for the NAND controller to work
  properly

* tag 'arm-soc/for-4.9/devicetree-arm64-fixes' of http://github.com/Broadcom/stblinux:
  arm64: dts: Updated NAND DT properties for NS2 SVK
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.9:
 - A couple of patches from Fabio to fix the GPC power domain regression
   which is caused by PM Domain core change 0159ec67
   ("PM / Domains: Verify the PM domain is present when adding a
   provider"), and a related kernel crash seen with multi_v7_defconfig
   build.
 - Correct the PHY ID mask for AR8031 to match phy driver code.
 - Apply new added timer erratum A008585 for LS1043A and LS2080A SoC.
 - Correct vf610 global timer IRQ flag to avoid warning from gic driver
   after commit 992345a5 ("irqchip/gic: WARN if setting the
   interrupt type for a PPI fails").

* tag 'imx-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into fixes

UniPhier ARM SoC fixes for v4.9

- Add "select ARCH_HAS_RESET_CONTROLLER" in Kconfig
- Rename wrongly-named mioctrl to sdctrl

* tag 'uniphier-fixes-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
Signed-off-by: NOlof Johansson <olof@lixom.net>

Pull driver core fixes from Greg KH:
 "Here are two small driver core / kernfs fixes for 4.9-rc3.

  One makes the Kconfig entry for DEBUG_TEST_DRIVER_REMOVE a bit more
  explicit that this is a crazy thing to enable for a distro kernel
  (thanks for trying Fedora!), the other resolves an issue with vim
  opening kernfs files (sysfs, configfs, etc.)

  Both have been in linux-next with no reported issues"

* tag 'driver-core-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Make Kconfig text for DEBUG_TEST_DRIVER_REMOVE stronger
  kernfs: Add noop_fsync to supported kernfs_file_fops

Pull staging and IIO driver fixes from Greg KH:
 "Here are some small staging and iio driver fixes for reported issues
  for 4.9-rc3. Nothing major, the "largest" being a lustre fix for a
  sysfs file that was obviously wrong, and had never been tested, so it
  was moved to debugfs as that is where it belongs. The others are small
  bug fixes for reported issues with various staging or iio drivers.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  greybus: fix a leak on error in gb_module_create()
  greybus: es2: fix error return code in ap_probe()
  greybus: arche-platform: Add missing of_node_put() in arche_platform_change_state()
  staging: android: ion: Fix error handling in ion_query_heaps()
  iio: accel: sca3000_core: avoid potentially uninitialized variable
  iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value
  staging/lustre/llite: Move unstable_stats from sysfs to debugfs
  Staging: wilc1000: Fix kernel Oops on opening the device
  staging: android/ion: testing the wrong variable
  Staging: greybus: uart: Use gbphy_dev->dev instead of bundle->dev
  Staging: greybus: gpio: Use gbphy_dev->dev instead of bundle->dev
  iio: adc: ti-adc081c: Select IIO_TRIGGERED_BUFFER to prevent build errors
  iio: maxim_thermocouple: Align 16 bit big endian value of raw reads

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty and serial driver fixes for reported
  issues for 4.9-rc3. Nothing major, but they do resolve a bunch of
  problems with the tty core changes that are in 4.9-rc1, and finally
  the atmel serial driver is back working properly.

  All have been in linux-next with no reported issues"

* tag 'tty-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial_core: fix NULL struct tty pointer access in uart_write_wakeup
  tty: serial_core: Fix serial console crash on port shutdown
  tty/serial: at91: fix hardware handshake on Atmel platforms
  vt: clear selection before resizing
  sc16is7xx: always write state when configuring GPIO as an output
  sh-sci: document R8A7743/5 support
  tty: serial: 8250: 8250_core: NXP SC16C2552 workaround
  tty: limit terminal size to 4M chars
  tty: serial: fsl_lpuart: Fix Tx DMA edge case
  serial: 8250_lpss: enable MSI for sure
  serial: core: fix console problems on uart_close
  serial: 8250_uniphier: fix clearing divisor latch access bit
  serial: 8250_uniphier: fix more unterminated string
  serial: pch_uart: add terminate entry for dmi_system_id tables
  devicetree: bindings: uart: Add new compatible string for ZynqMP
  serial: xuartps: Add new compatible string for ZynqMP
  serial: SERIAL_STM32 should depend on HAS_DMA
  serial: stm32: Fix comparisons with undefined register
  tty: vt, fix bogus division in csi_J

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 4.9-rc3.

  There is the usual number of gadget and xhci patches in here to
  resolved reported issues, as well as some usb-serial driver fixes and
  new device ids.

  All have been in linux-next with no reported issues"

* tag 'usb-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: chipidea: host: fix NULL ptr dereference during shutdown
  usb: renesas_usbhs: add wait after initialization for R-Car Gen3
  usb: increase ohci watchdog delay to 275 msec
  usb: musb: Call pm_runtime from musb_gadget_queue
  usb: musb: Fix hardirq-safe hardirq-unsafe lock order error
  usb: ehci-platform: increase EHCI_MAX_RSTS to 4
  usb: ohci-at91: Set RemoteWakeupConnected bit explicitly.
  USB: serial: fix potential NULL-dereference at probe
  xhci: use default USB_RESUME_TIMEOUT when resuming ports.
  xhci: workaround for hosts missing CAS bit
  xhci: add restart quirk for Intel Wildcatpoint PCH
  USB: serial: cp210x: fix tiocmget error handling
  wusb: fix error return code in wusb_prf()
  Revert "Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"
  Revert "usb: dwc2: gadget: fix TX FIFO size and address initialization"
  Revert "usb: dwc2: gadget: change variable name to more meaningful"
  USB: serial: ftdi_sio: add support for Infineon TriBoard TC2X7
  wusb: Stop using the stack for sg crypto scratch space
  usb: dwc3: Fix size used in dma_free_coherent()
  usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable
  ...

Pull ACPI fixes from Rafael Wysocki:
 "These fix recent ACPICA regressions, an older PCI IRQ management
  regression, and an incorrect return value of a function in the APEI
  code.

  Specifics:

   - Fix three ACPICA issues related to the interpreter locking and
     introduced by recent changes in that area (Lv Zheng).

   - Fix a PCI IRQ management regression introduced during the 4.7 cycle
     and related to the configuration of shared IRQs on systems with an
     ISA bus (Sinan Kaya).

   - Fix up a return value of one function in the APEI code (Punit
     Agrawal)"

* tag 'acpi-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination
  ACPI / APEI: Fix incorrect return value of ghes_proc()
  ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
  ACPI/PCI: pci_link: penalize SCI correctly
  ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages

Pull power management fixes from Rafael Wysocki:
 "These fix two intel_pstate issues related to the way it works when the
  scaling_governor sysfs attribute is set to "performance" and fix up
  messages in the system suspend core code.

  Specifics:

   - Fix a missing KERN_CONT in a system suspend message by converting
     the affected code to using pr_info() and pr_cont() instead of the
     "raw" printk() (Jon Hunter).

   - Make intel_pstate set the CPU P-state from its .set_policy()
     callback when the scaling_governor sysfs attribute is set to
     "performance" so that it interacts with NOHZ_FULL more predictably
     which was the case before 4.7 (Rafael Wysocki).

   - Make intel_pstate always request the maximum allowed P-state when
     the scaling_governor sysfs attribute is set to "performance" to
     prevent it from effectively ingoring that setting is some
     situations (Rafael Wysocki)"

* tag 'pm-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Always set max P-state in performance mode
  PM / suspend: Fix missing KERN_CONT for suspend message
  cpufreq: intel_pstate: Set P-state upfront in performance mode

Pull ARC updates from Vineet Gupta:

 - support IDU intc for UP builds

 - support gz, lzma compressed uImage [Daniel Mentz]

 - adjust /proc/cpuinfo for non-continuous cpu ids [Noam Camus]

 - syscall for userspace cmpxchg assist for configs lacking hardware atomics

 - rework of boot log printing mainly for identifying older arc700 cores

 - retiring some old code, build toggles

* tag 'arc-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: module: print pretty section names
  ARC: module: elide loop to save reference to .eh_frame
  ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...
  ARC: build: retire old toggles
  ARC: boot log: refactor cpu name/release printing
  ARC: boot log: remove awkward space comma from MMU line
  ARC: boot log: don't assume SWAPE instruction support
  ARC: boot log: refactor printing abt features not captured in BCRs
  ARCv2: boot log: print IOC exists as well as enabled status
  ARCv2: IOC: use @ioc_enable not @ioc_exist where intended
  ARC: syscall for userspace cmpxchg assist
  ARC: fix build warning in elf.h
  ARC: Adjust cpuinfo for non-continuous cpu ids
  ARC: [build] Support gz, lzma compressed uImage
  ARCv2: intc: untangle SMP, MCIP and IDU

* acpica-fixes:
  ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
  ACPICA: Dispatcher: Fix an unbalanced lock exit path in acpi_ds_auto_serialize_method()
  ACPICA: Dispatcher: Fix order issue of method termination

* acpi-pci-fixes:
  ACPI/PCI: pci_link: Include PIRQ_PENALTY_PCI_USING for ISA IRQs
  ACPI/PCI: pci_link: penalize SCI correctly
  ACPI/PCI/IRQ: assign ISA IRQ directly during early boot stages

* acpi-apei-fixes:
  ACPI / APEI: Fix incorrect return value of ghes_proc()

In the code path of acpi_ev_initialize_region(), there is namespace
modification code unlocked. This patch tunes the code to make sure
such modification are always locked.

Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues)
Tested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There is a lock unbalanced exit path in acpi_ds_initialize_method(),
this patch corrects it.

Fixes: 441ad11d (ACPICA: Dispatcher: Fix a mutex issue for method auto serialization)
Tested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The last step of the method termination should be the end of the method
serialization. Otherwise, the steps happening after it will face the race
issues that cannot be protected by the method serialization mechanism.

This patch fixes this issue by moving the per-method-object deletion code
prior than the end of the method serialization. Otherwise, the possible
race issues may result in AE_ALREADY_EXISTS error in a parallel
environment.

Fixes: 74f51b80 (ACPICA: Namespace: Fix dynamic table loading issues)
Reported-and-tested-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - Convert cmp to cmpd in idle enter sequence (Segher Boessenkool)
   - cxl: Fix leaking pid refs in some error paths (Vaibhav Jain)
   - Re-fix race condition between going idle and entering guest (Paul Mackerras)
   - Fix race condition in setting lock bit in idle/wakeup code (Paul Mackerras)
   - radix: Use tlbiel only if we ever ran on the current cpu (Aneesh Kumar K.V)
   - relocation, register save fixes for system reset interrupt (Nicholas Piggin)

  Fixes for code merged this cycle:
   - Fix CONFIG_ALIVEC typo in restore_tm_state() (Valentin Rothberg)
   - KVM: PPC: Book3S HV: Fix build error when SMP=n (Michael Ellerman)"

* tag 'powerpc-4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: relocation, register save fixes for system reset interrupt
  powerpc/mm/radix: Use tlbiel only if we ever ran on the current cpu
  powerpc/process: Fix CONFIG_ALIVEC typo in restore_tm_state()
  powerpc/64: Fix race condition in setting lock bit in idle/wakeup code
  powerpc/64: Re-fix race condition between going idle and entering guest
  cxl: Fix leaking pid refs in some error paths
  powerpc: Convert cmp to cmpd in idle enter sequence
  KVM: PPC: Book3S HV: Fix build error when SMP=n

* pm-cpufreq-fixes:
  cpufreq: intel_pstate: Always set max P-state in performance mode
  cpufreq: intel_pstate: Set P-state upfront in performance mode

* pm-sleep-fixes:
  PM / suspend: Fix missing KERN_CONT for suspend message

Pull perf fixes from Ingo Molnar:
 "Misc kernel fixes: a virtualization environment related fix, an uncore
  PMU driver removal handling fix, a PowerPC fix and new events for
  Knights Landing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Honour the CPUID for number of fixed counters in hypervisors
  perf/powerpc: Don't call perf_event_disable() from atomic context
  perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic
  perf/x86/intel/cstate: Add C-state residency events for Knights Landing

Pull libnvdimm fixes from Dan Williams:
 "A build fix, a NULL de-reference found by static analysis, a misuse of
  the percpu_ref_exit() (tagged for -stable), and notification of failed
  attempts to clear media errors.

  These patches have received a build success notification from the
  0day- kbuild-robot and appeared in next-20161028"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix percpu_ref_exit ordering
  nvdimm: make CONFIG_NVDIMM_DAX 'bool'
  pmem: report error on clear poison failure
  libnvdimm, namespace: potential NULL deref on allocation error

Pull arm64 fixes from Will Deacon:
 "Three arm64 fixes for -rc3.  They're all pretty straightforward: a
  couple of NUMA issues from the Huawei folks and a thinko in
  __page_to_voff that seems to be benign, but is certainly better off
  fixed.

  Summary:
   - couple of NUMA fixes
   - thinko in __page_to_voff"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix __page_to_voff definition
  arm64/numa: fix incorrect log for memory-less node
  arm64/numa: fix pcpu_cpu_distance() to get correct CPU proximity

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: three build fixes, an unwinder fix and a microcode loader
  fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=y
  x86: Fix export for mcount and __fentry__
  x86/quirks: Hide maybe-uninitialized warning
  x86/build: Fix build with older GCC versions
  x86/unwind: Fix empty stack dereference in guess unwinder

Pull timer fixes from Ingo Molnar:
 "Fix four timer locking races: two were noticed by Linus while
  reviewing the code while chasing for a corruption bug, and two
  from fixing spurious USB timeouts"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Prevent base clock corruption when forwarding
  timers: Prevent base clock rewind when forwarding clock
  timers: Lock base for same bucket optimization
  timers: Plug locking race vs. timer migration

Merge branches 'core-urgent-for-linus', 'irq-urgent-for-linus' and 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull objtool, irq and scheduler fixes from Ingo Molnar:
 "One more objtool fixlet for GCC6 code generation patterns, an irq
  DocBook fix and an unused variable warning fix in the scheduler"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix rare switch jump table pattern detection

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  doc: Add missing parameter for msi_setup

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Remove unused but set variable 'rq'

Now that we have referece to section name string table in
apply_relocate_add(), use it to

 - print the name of section being relocated
 - print symbol with NULL name (since it refers to a section)

before

| Section to fixup 7000a060
| =========================================================
| rela->r_off | rela->addend | sym->st_value | ADDR | VALUE
| =========================================================
|	1c		0		7000e000  7000a07c 7000e000 []
|	40		0		7000a000  7000a0a0 7000a000 []

after

| Section to fixup .eh_frame @7000a060
| =========================================================
| r_off	r_add	st_value ADDRESS  VALUE
| =========================================================
|    1c	0	7000e000 7000a07c 7000e000 [.init.text]
|    40	0	7000a000 7000a0a0 7000a000 [.exit.text]
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The loop was really needed in .debug_frame regime where wanted make it
as SH_ALLOC so that apply_relocate_add() would process it. That's not
needed for .eh_frame, so we check this in apply_relocate_add() which
gets called for each section.

Note that we need to save reference to "section name strings" section in
module_frob_arch_sections() since apply_relocate_add() doesn't get that
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

... given that we have perf counters abel to do the same thing non
intrusively
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

These are really ancient toggles and tools no longer require them to be
passed. This paves way for deprecating them in long run.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

The motivation is to identify ARC750 vs. ARC770 (we currently print
generic "ARC700").

A given ARC700 release could be 750 or 770, with same ARCNUM (or family
identifier which is unfortunate). The existing arc_cpu_tbl[] kept a single
concatenated string for core name and release which thus doesn't work
for 750 vs. 770 identification.

So split this into 2 tables, one with core names and other with release.
And while we are at it, get rid of the range checking for family numbers.
We just document the known to exist cores running Linux and ditch
others.

With this in place, we add detection of ARC750 which is
 - cores 0x33 and before
 - cores 0x34 and later with MMUv2
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

This came to light when helping a customer with oldish ARC750 core who
were getting instruction errors because of lack of SWAPE but boot log
was incorrectly printing it as being present
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

On older arc700 cores, some of the features configured were not present
in Build config registers. To print about them at boot, we just use the
Kconfig option i.e. whether linux is built to use them or not.
So yes this seems bogus, but what else can be done. Moreover if linux is
booting with these enabled, then the Kconfig info is a good indicator
anyways.

Over time these "hacks" accumulated in read_arc_build_cfg_regs() as well
as arc_cpu_mumbojumbo(). so refactor and move all of those in a single
place: read_arc_build_cfg_regs(). This causes some code redcution too:

| bloat-o-meter2 arch/arc/kernel/setup.o.0 arch/arc/kernel/setup.o.1
| add/remove: 0/0 grow/shrink: 2/1 up/down: 64/-132 (-68)
| function                                     old     new   delta
| setup_processor                              610     670     +60
| cpuinfo_arc700                                76      80      +4
| arc_cpu_mumbojumbo                           752     620    -132
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Pull btrfs fixes from Chris Mason:
 "My patch fixes the btrfs list_head abuse that we tracked down during
  Dave Jones' memory corruption investigation. With both Jens and my
  patches in place, I'm no longer able to trigger problems.

  Filipe is fixing a difficult old bug between snapshots, balance and
  send. Dave is cooking a few more for the next rc, but these are tested
  and ready"

* 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix races on root_log_ctx lists
  btrfs: fix incremental send failure caused by balance

Previously we would not print the case when IOC existed but was not
enabled.

And while at it, reduce one line off boot printing by consolidating
the Peripheral address space and IO-Coherency which in a way
applies to them
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>

Pull sound fixes from Takashi Iwai:
 "This contains the usual stuff -- the fixups and quirks for HD-audio
  and USB-audio, in addition to a bad regression fix in ALSA sequencer
  timer since 4.8, and a trivial fix for asihpi PCI driver"

* tag 'sound-4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add quirk for Syntek STK1160
  ALSA: seq: Fix time account regression
  ALSA: hda - Fix surround output pins for ASRock B150M mobo
  ALSA: hda - Fix headset mic detection problem for two Dell laptops
  ALSA: asihpi: fix kernel memory disclosure
  ALSA: hda - Adding a new group of pin cfg into ALC295 pin quirk table
  ALSA: hda - allow 40 bit DMA mask for NVidia devices

Pull drm x86/pat regression fixes from Dave Airlie:
 "This is a standalone pull request for the fix for a regression
  introduced in -rc1 by a change to vm_insert_mixed to start using the
  PAT range tracking to validate page protections. With this fix in
  place, all the VRAM mappings for GPU drivers ended up at UC instead of
  WC.

  There are probably better ways to fix this long term, but nothing I'd
  considered for -fixes that wouldn't need more settling in time. So
  I've just created a new arch API that the drivers can reserve all
  their VRAM aperture ranges as WC"

* tag 'drm-x86-pat-regression-fix' of git://people.freedesktop.org/~airlied/linux:
  drm/drivers: add support for using the arch wc mapping API.
  x86/io: add interface to reserve io memtype for a resource range. (v1.1)

Pull device mapper fixes from Mike Snitzer:

 - a couple DM raid and DM mirror fixes

 - a couple .request_fn request-based DM NULL pointer fixes

 - a fix for a DM target reference count leak, on target load error,
   that prevented associated DM target kernel module(s) from being
   removed

* tag 'dm-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm table: fix missing dm_put_target_type() in dm_table_add_target()
  dm rq: clear kworker_task if kthread_run() returned an error
  dm: free io_barrier after blk_cleanup_queue call
  dm raid: fix activation of existing raid4/10 devices
  dm mirror: use all available legs on multiple failures
  dm mirror: fix read error on recovery after default leg failure
  dm raid: fix compat_features validation

Pull key fixes from James Morris:

 - fix a buffer overflow when displaying /proc/keys [CVE-2016-7042].

 - fix broken initialisation in the big_key implementation that can
   result in an oops.

 - make big_key depend on having a random number generator available in
   Kconfig.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security/keys: make BIG_KEYS dependent on stdrng.
  KEYS: Sort out big_key initialisation
  KEYS: Fix short sprintf buffer in /proc/keys show function