This includes code for new fifo-based xps_hwicap in addition to the
older opb_hwicap, which has a significantly different interface.  The
common code between the two drivers is largely shared.

Significant differences exists between this driver and what is
supported in the EDK drivers.  In particular, most of the
architecture-specific code for reconfiguring individual FPGA resources
has been removed.  This functionality is likely better provided in a
user-space support library.  In addition, read and write access is
supported.  In addition, although the xps_hwicap cores support
interrupt-driver mode, this driver only supports polled operation, in
order to make the code simpler, and since the interrupt processing
overhead is likely to slow down the throughput under Linux.
Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Probing of the console at console_initcall time is broken.  It tries to
call memory allocation routines which aren't initialized yet.

Problem solved by removing the early probe entirely.  The console init
is called again anyway after the uartlite device is initialized and the
memory allocation routines can be called safely.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>

Mainly, this involves two changes:
1) xilinx->xlnx (recognized standard is to use the stock ticker)
2) In order to have the device tree focus on describing what the
hardware is as exactly as possible, the compatible strings contain the
full IP name and IP version.
Signed-off-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Fix compile errors in the xilinxfb, xsysace and uartlite drivers used
by the Xilinx Virtex platform
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NPeter Korsgaard <jacmet@sunsite.dk>

Fix kernel-doc empty line warning:
Warning(linux-2.6.24-git8//drivers/base/class.c:866): bad line:
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit a119ee8e.

Adaptec found this was causing system lockups.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

scsi_init_queue is expected to clean up allocated things when it
fails.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Needs to call kmem_cache_destroy for scsi_bidi_sdb_cache in
scsi_exit_queue.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This enables fill_from_dev_buffer and fetch_to_dev_buffer to handle
bidi commands.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This adds get_data_transfer_info helper function that get lha and
sectors for READ_* and WRITE_* commands (and XDWRITEREAD_10 later).
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

With the sg table code, every SCSI driver is now either chain capable
or broken (or has sg_tablesize set so chaining is never activated), so
there's no need to have a check in the host template.

Also tidy up the code by moving the scatterlist size defines into the
SCSI includes and permit the last entry of the scatterlist pools not
to be a power of two.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

At the block level bidi request uses req->next_rq pointer for a second
bidi_read request.
At Scsi-midlayer a second scsi_data_buffer structure is used for the
bidi_read part. This bidi scsi_data_buffer is put on
request->next_rq->special. Struct scsi_cmnd is not changed.

- Define scsi_bidi_cmnd() to return true if it is a bidi request and a
  second sgtable was allocated.

- Define scsi_in()/scsi_out() to return the in or out scsi_data_buffer
  from this command This API is to isolate users from the mechanics of
  bidi.

- Define scsi_end_bidi_request() to do what scsi_end_request() does but
  for a bidi request. This is necessary because bidi commands are a bit
  tricky here. (See comments in body)

- scsi_release_buffers() will also release the bidi_read scsi_data_buffer

- scsi_io_completion() on bidi commands will now call
  scsi_end_bidi_request() and return.

- The previous work done in scsi_init_io() is now done in a new
  scsi_init_sgtable() (which is 99% identical to old scsi_init_io())
  The new scsi_init_io() will call the above twice if needed also for
  the bidi_read command. Only at this point is a command bidi.

- In scsi_error.c at scsi_eh_prep/restore_cmnd() make sure bidi-lld is not
  confused by a get-sense command that looks like bidi. This is done
  by puting NULL at request->next_rq, and restoring.

[jejb: update to sg_table and resolve conflicts
also update to blk-end-request and resolve conflicts]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

In preparation for bidi we abstract all IO members of scsi_cmnd,
that will need to duplicate, into a substructure.

- Group all IO members of scsi_cmnd into a scsi_data_buffer
  structure.
- Adjust accessors to new members.
- scsi_{alloc,free}_sgtable receive a scsi_data_buffer instead of
  scsi_cmnd. And work on it.
- Adjust scsi_init_io() and  scsi_release_buffers() for above
  change.
- Fix other parts of scsi_lib/scsi.c to members migration. Use
  accessors where appropriate.

- fix Documentation about scsi_cmnd in scsi_host.h

- scsi_error.c
  * Changed needed members of struct scsi_eh_save.
  * Careful considerations in scsi_eh_prep/restore_cmnd.

- sd.c and sr.c
  * sd and sr would adjust IO size to align on device's block
    size so code needs to change once we move to scsi_data_buff
    implementation.
  * Convert code to use scsi_for_each_sg
  * Use data accessors where appropriate.

- tgt: convert libsrp to use scsi_data_buffer

- isd200: This driver still bangs on scsi_cmnd IO members,
  so need changing

[jejb: rebased on top of sg_table patches fixed up conflicts
and used the synergy to eliminate use_sg and sg_count]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If we export scsi_init_io()/scsi_release_buffers() instead of
scsi_{alloc,free}_sgtable() from scsi_lib than tgt code is much more
insulated from scsi_lib changes. As a bonus it will also gain bidi
capability when it comes.

[jejb: rebase on to sg_table and fix up rejections]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Acked-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  CC [M]  drivers/scsi/aic7xxx/aic7xxx_osm_pci.o
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:148: warning: 'ahc_linux_pci_dev_suspend' defined but not used
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:166: warning: 'ahc_linux_pci_dev_resume' defined but not used

This moves aic7xxx_pci_driver struct, removes some forward declarations,
and adds some ifdef CONFIG_PM.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

  CC [M]  drivers/scsi/aic7xxx/aic79xx_osm_pci.o
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:101: warning: 'ahd_linux_pci_dev_suspend' defined but not used
drivers/scsi/aic7xxx/aic79xx_osm_pci.c:121: warning: 'ahd_linux_pci_dev_resume' defined but not used

This moves aic79xx_pci_driver struct, removes some forward
declarations, and adds some ifdef CONFIG_PM.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The driver only needs to check the SCB_ACTIVE flag if the SCB is not
in the untagged queue.

If the driver is in error recovery, you may end panic'ing on a TUR
that is in the untagged queue.

Attempting to queue an ABORT message
CDB: 0x0 0x0 0x0 0x0 0x0 0x0
SCB 3 done'd twice

This patch is included in Adaptec's 6.3.11 driver on their website.
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

SGI IP28 machines would need special treatment (enable adding addtional
wait states) when accessing memory uncached. To avoid this pain I
changed the driver to use only cached access to memory.
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The commit de25deb1 changed
scsi_cmnd.sense_buffer from a static array to a dynamically allocated
buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The commit de25deb1 changed
scsi_cmnd.sense_buffer from a static array to a dynamically allocated
buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The commit de25deb1 changed
scsi_cmnd.sense_buffer from a static array to a dynamically allocated
buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

&cmnd->sense_buffer now zeroes the wrong thing.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

On a big powerpc box I got the following oops with 2.6.24-git2:

sym0: <1010-66> rev 0x1 at pci 0000:d0:01.0 irq 215
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
 target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
scsi 0:0:8:0: Direct-Access     IBM      ST318305LC       C509 PQ: 0
ANSI: 3
 target0:0:8: tagged command queuing enabled, command queue depth 16.
 target0:0:8: Beginning Domain Validation
 target0:0:8: asynchronous
 target0:0:8: wide asynchronous
 target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
 target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000038460
cpu 0x25: Vector: 300 (Data Access) at [c00000000f567840]
    pc: c000000000038460: .memcpy+0x60/0x280
    lr: d000000000050280: .sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx]
    sp: c00000000f567ac0
   msr: 8000000000009032
   dar: 0
 dsisr: 42000000
  current = 0xc000006d1e0af0a0
  paca    = 0xc0000000004afc00
    pid   = 0, comm = swapper
enter ? for help
[link register   ] d000000000050280
.sym_set_cam_result_error+0xfc/0x1e0 [sym53c8xx]
[c00000000f567ac0] c00000000f567b80 (unreliable)
[c00000000f567b80] d0000000000552b8 .sym_complete_error+0x12c/0x1bc [sym53c8xx]
[c00000000f567c20] d0000000000561a4 .sym_int_sir+0xaa4/0x1718 [sym53c8xx]
[c00000000f567d00] d000000000057e8c .sym_interrupt+0x4e4/0x6ec [sym53c8xx]
[c00000000f567dc0] d00000000004fdf4 .sym53c8xx_intr+0x6c/0xdc [sym53c8xx]
[c00000000f567e50] c0000000000a83e0 .handle_IRQ_event+0x7c/0xec
[c00000000f567ef0] c0000000000aa344 .handle_fasteoi_irq+0x130/0x1f0
[c00000000f567f90] c00000000002a538 .call_handle_irq+0x1c/0x2c
[c000004d5e0b3a90] c00000000000c320 .do_IRQ+0x108/0x1d0
[c000004d5e0b3b20] c000000000004790 hardware_interrupt_entry+0x18/0x1c

The memset() in sym_set_cam_result_error() would appear to be trashing
the scsi_cmnd struct instead of clearing sense_buffer.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add printk_ratelimit check in front of printk.  This prevents spamming
of the message during 32-bit ubuntu 6.06server install.  Previously, it
would hang during the partition formatting stage.
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves kvm_vm_stat to x86.h, and every arch
can define its own kvm_vm_stat in $arch.h
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches moves two fields round_robin_prev_vcpu and tss to kvm_arch.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches moves two fields vpid and vioapic to kvm_arch
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches moves mmu-related fields to kvm_arch.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches create kvm_arch to hold arch-specific kvm fileds
and moves fields naliases and aliases to kvm_arch.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches moves kvm_vcpu_stat to x86.h, so every
arch can define its own kvm_vcpu_stat structure.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches removes KVM_COMM macro, original it is hold
kvm_vcpu common fields.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patches moves kvm_vcpu definition to kvm.h, and finally
kvm.h includes x86.h.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Since these functions need to know the details of kvm or kvm_vcpu structure,
it can't be put in x86.h.  Create mmu.h to hold them.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move all the architecture-specific fields in kvm_vcpu into a new struct
kvm_vcpu_arch.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Emulate cmpxchg8b atomically on i386. This is required to avoid a guest
pte walker from seeing a splitted write.

[avi: make it compile]
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>