Asus X205TA built-in keyboard contains wrong
logical maximum value in report descriptor.

0x05, 0x01,  // Usage Page (Generic Desktop)
0x09, 0x06,  // Usage (Keyboard)
0xa1, 0x01,  // Collection (Application)
0x85, 0x01,  // Report ID (1)
0x05, 0x07,  // Usage Page (Keyboard/Keypad)
0x19, 0xe0,  // Usage Minimum (224)
0x29, 0xe7,  // Usage Maximum (231)
0x15, 0x00,  // Logical Minimum (0)
0x25, 0x01,  // Logical Maximum (1)
0x75, 0x01,  // Report Size (1)
0x95, 0x08,  // Report Count (8)
0x81, 0x02,  // Input (Data,Array,Abs)
0x95, 0x01,  // Report Count (1)
0x75, 0x08,  // Report Size (8)
0x81, 0x03,  // Input (Const,Var,Abs)
0x95, 0x05,  // Report Count (5)
0x75, 0x01,  // Report Size (1)
0x05, 0x08,  // Usage (LED)
0x19, 0x01,  // Usage Minimum (1)
0x29, 0x05,  // Usage Maximum (5)
0x91, 0x02,  // Output (Data,Var,Abs)
0x95, 0x01,  // Report Count (1)
0x75, 0x03,  // Report Size (3)
0x91, 0x03,  // Output (Const,Var,Abs)
0x95, 0x06,  // Report Count (6)
0x75, 0x08,  // Report Size (8)
0x15, 0x00,  // Logical Minimum (0)
0x25, 0x65,  // Logical Maximum (101)  * too small *
0x05, 0x07,  // Usage Page (Keyboard/Keypad)
0x19, 0x00,  // Usage Minimum (0)
0x29, 0xdd,  // Usage Maximum (221)
0x81, 0x00,  // Input(Data,Array,Abs)

In Asus X205TA japanese keyboard model,there are language
specific keys over usage id 101.
This patch correct wrong logical maximum in report
descriptor.
Signed-off-by: NYusuke Fujimaki <usk.fujimaki@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microsoft Wireless Comfort Keyboard has vendor specific My Favorites
1-5 keys. Linux already supports this buttons on other MS keyboards by
MS_ERGONOMY quirk. So apply MS_ERGONOMY quirk to USB PID 0x00e3
(Microsoft Wireless Optical Desktop Receiver 3.0A). After this
My Favorites 1..5 keys will be reported as KEY_F14..KEY_F15 events.
Signed-off-by: NSlava Bacherikov <slava@bacher09.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The C-Media CM6533 is a USB audio chip featuring it's jack detection
capability.The device originates an interrupt transfer via HID interface each
time when a jack event occurs.  The purpose of this patch is to handle hid raw
events to keep the operating system informed of user interactions.
Signed-off-by: NBen Chen <ben_chen@bizlinktech.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid_ignore_special_drivers works fine until hid_scan_report autodetects and
reassign devices (for hid-multitouch, hid-microsoft and hid-rmi).

Simplify the handling of the parameter: if it is there, use hid-generic, no
matter what, and if not, scan the device or rely on the hid_have_special_driver
table.

This was detected while trying to disable hid-multitouch on a Surface Pro cover
which prevented to use the keyboard.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The patch that added Logitech Dual Action gamepad support forgot to
update the special driver list for the device. This caused the logitech
driver not to probe unless kernel module load order was favorable.
Update the special driver list to fix it. Thanks to Simon Wood for the
idea.

Cc: Vitaly Katraew <zawullon@gmail.com>
Fixes: 56d0c8b7 ("HID: add support for Logitech Dual Action gamepads")
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Plugging a Logitech DJ receiver with KASAN activated raises a bunch of
out-of-bound readings.

The fields are allocated up to MAX_USAGE, meaning that potentially, we do
not have enough fields to fit the incoming values.
Add checks and silence KASAN.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

extract() and implement() access buffer containing reports in 64-bit
chunks, but there is no guarantee that buffers are padded to 64 bit
boundary. In fact, KASAN has caught such OOB access with i2c-hid and
Synaptics touch controller.

Instead of trying to hunt all parties that allocate buffers and make
sure they are padded, let's switch extract() and implement() to byte
access. It is a bit slower, bit we are not dealing with super fast
devices here.

Also let's fix link to the HID spec while we are at it.
Signed-off-by: NDmitry Torokhov <dtor@chromium.org>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This adds rumble and LED support for nyko core controllers
using the sino lite chip vendor:1345 product:3008, for PS3.

Setting operational mode and output reports are the same as
sixaxis but the input report has a different format since the
PS3 accepts HID usb devices. For it to work, an exception is
needed to skip overriding the report descriptor and use the
original one.
Signed-off-by: NScott Moreau <oreaus@gmail.com>
Acked-by: NAntonio Ospite <ao2@ao2.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There seems to be a new version of the Microchip Pick16F1454 with a
different PID (0xf2f7). This device should also be ignored by the HID
driver. The PID was observed with the second version of the Yepkit Ykush
USB hub.
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Use kobj_to_dev() instead of open-coding it.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add a new helper to_hid_driver() and use it in hid-core.c.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Use to_hid_device() instead of container_of().
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Now, PM core supports asynchronous suspend/resume mode for devices
during system suspend/resume, and the power state transition of one
device may be completed in separate kernel thread. PM core ensures
all power state transition timing dependency between devices. This
patch enables hid devices to suspend/resume asynchronously. This
will take advantage of multicore and improve system suspend/resume
speed.
Signed-off-by: NZhonghui Fu <zhonghui.fu@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

scnprintf() exists to provide these semantics, so we might as well use
it.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds basic support for the Logitech G920 wheel when in HID
mode. This wheel 'speaks' the HID++ protocol, and therefor is driven
with hid-logitech-hidpp.

At this stage the driver only shows that it can communicate with the
wheel by outputting the name discovered over HID++.

The normal HID functions work to give input functionality using
joystick/event interface.

Note: in 'hidpp_probe()' we have to start the hardware to get packets
flowing, the same might apply in future for other devices which don't
use the unifying protocol.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Currently the sysfs report_descriptor attribute is only available if the device
is claimed.  We have the descriptor before we even create the device node, so
just instantiate report_descriptor statically.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

At present the G29 is mis-identified as a DFGT, this patch ensures
that the wheel is correctly detected and allows setting the LEDs and
turning range via the '/sys' interface.

This wheel can also emulate other types of Logitech wheels.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch implements a HID driver for the Corsair Vengeance K90 keyboard.

It fixes the behaviour of the keys using incorrect HID usage codes and exposes
the macro playback mode and current profile to the user space through sysfs
attributes. It also adds two LED class devices controlling the "record" LED and
the backlight.
Signed-off-by: NClément Vuchener <clement.vuchener@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

hid_connect adds various strings to the buffer but they're all
conditional. You can find circumstances where nothing would be written
to it but the kernel will still print the supposedly empty buffer with
printk. This leads to corruption on the console/in the logs.

Ensure buf is initialized to an empty string.
Signed-off-by: NRichard Purdie <richard.purdie@linuxfoundation.org>
[dvhart: Initialize string to "" rather than assign buf[0] = NULL;]
Cc: Jiri Kosina <jikos@kernel.org>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Just to prettify the log message. Otherwise it would be <UNKNOWN>.
Signed-off-by: NDaniel Martin <consume.noise@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds support for Microsoft Type Cover 3 with 0x07e2 product ID.
Signed-off-by: NDonavan Lance <shvr@fedoraproject.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch enables the Saitek HID quirk for the mode button of the Mad Catz
R.A.T.5 gaming mouse by adding the same quirk that's been neeeded for
preivous versions.

[jikos@kernel.org: update changelog a little bit]
Signed-off-by: NHarald Brinkmann <hbrinkmann@braincalibration.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Enable ELAN0100 touchpad driver, found on a Asus X205TA laptop, to
gai 2,3 fingers tap and 2 fingers scroll.
Signed-off-by: NMichele Curti <michele.curti@gmail.com>
Reviewed-by: NDuson Lin <dusonlin@emc.com.tw>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This gamepad advertise 5 absolute axis while 4 are actually used.
The second Z axis shows some garbage, so it has to be ignored by HID.
The first Z axis and the Rz one are actually Rx and Ry. Remap them.

We could also just remap and ignore the axis in .input_mapping(). I
went ahead with .report_fixup() first, so here it is.
Reported-by: NOrivej Desh <orivej@gmx.fr>
Tested-by: NOrivej Desh <orivej@gmx.fr>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Acer Aspire Switch 12 keyboard Chicony's controller reports too big usage
index on the 1st interface. The patch fixes the report. The work based on
solution from drivers/hid/hid-holtek-mouse.c

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=101721Signed-off-by: NNicholas Kudriavtsev <nkudriavtsev@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

This patch adds keyboard support for MacbookPro12,1 as WELLSPRING9
(0x0272, 0x0273, 0x0274). The touchpad is handled in a separate
bcm5974 patch, as usual.
Tested-by: NJohn Horan <knasher@gmail.com>
Tested-by: NJochen Radmacher <jradmacher@gmx.de>
Tested-by: NYang Hongyang <burnef@gmail.com>
Tested-by: NYen-Chin, Lee <coldnew.tw@gmail.com>
Tested-by: NGeorge Hilios <ghilios@gmail.com>
Tested-by: NJanez Urevc <janez@janezurevc.name>
Signed-off-by: NHenrik Rydberg <rydberg@bitmath.org>
Acked-by: NJiri Kosina <jkosina@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Some device present proprietary collections with a usage min of 0x00 and
a usage max of 0xffff. hid-core currently reject them while most of the
time this is harmless.
Let's ignore the exceeding usages, and hope for the best.
Reported-by: NSimon Wörner <mail@simon-woerner.de>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

Adding support for the Microsoft Surface 3 (non-pro) Type Cover.

The existing definitions and quirks are actually for the Surface
Pro 3 type covers. I've renamed the old constants to reflect that
they belong to the Surface Pro 3, and added a new constant and
matching code for the Surface 3.
Signed-off-by: NStephen Just <stephenjust@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

ELAN0600 seems to work just fine in mouse emulation mode through i2c-hid,
but to have full raw touch support we need to register it in elan_i2c.ko
Reported-and-tested-by: NAlessio Treglia <alessio@debian.org>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NJiri Kosina <jkosina@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Adding support for the Microsoft Surface Pro Power Cover.
Signed-off-by: NRaimund Roth <raimundmroth@gmail.gom>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Removes Vernier Software & Technology devices from the ldusb
driver and the hid_ignore_list table of the usbhid driver in the
Linux tree.  These devices will now be supported via the hidraw
driver.

A user space driver for these devices will be found in the
Go! Software Development Kit from Vernier at
http://www.vernier.com/downloads/software-development-kits/go-sdk/.
These devices are also be supported by the LabQuest2 standalone
interface shown at http://www.vernier.com/products/interfaces/labq2/
and the LoggerPro for Linux software shown at
http://www.vernier.com/downloads/logger-pro-linux/.
Signed-off-by: NDennis O'Brien <dennis.obrien@eqware.net>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rename the function extract() to hid_field_extract(), make it external linkage
to allow the use from other modules.
Suggested-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGoffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Once there were kernel drivers for some of the phidgets devices, and for
those kernel drivers to work the hid system needed exceptions. Now the
kernel drivers are long gone in favour of the user-space drivers.

The user-space drivers support many more phidget devices and uses libusb.
The udev rules set up permissions so that the kernel hid driver can be
unbound from libusb, as it does for many devices not in hid_ignore_list.

http://www.phidgets.com/docs/OS_-_LinuxSigned-off-by: NSean Young <sean@mess.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device supports force feedback and has two ports.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Rearrange Sony controller devices into alphabetical order in the hardware
device list.
Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds the PID for the Sony motion controller to the hardware ID list.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This dock is used with the Thinkpad Helix 2 but suffers from an error
in the report descriptor where an usage max is 65535.

Add a report fixup for it and make the keyboard working.
Tested-by: NJonathan Oppenheim <lejono@gmail.com>
Tested-by: NJohn Reid <owlman.lists@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The linux kernel has supported the TiVo Slide remote control for some time, but
does not recognize the USB ID of the newer Slide Pro. This patch adds the
missing data structures so the newer remote will be recognized by the driver,
thereby allowing the TiVo, LiveTV, and Thumbs Up/Down buttons to be
mapped with a hwdb file.
Signed-off-by: NForest Wilkinson <web11.forest@tibit.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>