The third parameter to ext4_free_blocks is a struct buffer_head *.  This
parameter should be NULL not 0.

This quiets the sparse noise:

warning: Using plain integer as NULL pointer
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This quiets the sparse noise:

warning: incorrect type in argument 2 (different address spaces)
   expected void const [noderef] <asn:1>*from
   got struct fstrim_range *<noident>
warning: incorrect type in argument 1 (different address spaces)
   expected void [noderef] <asn:1>*to
   got struct fstrim_range *<noident>
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The function declarations in ext4.h are already marked extern, so it's
not necessary to do so in the .c files.

This quiets the sparse noise:

warning: function 'ext4_flush_completed_IO' with external linkage has definition
warning: function 'ext4_init_inode_table' with external linkage has definition
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Add block plug for ext4 .writepages. Though ext4 .writepages
already handles request merge very well, block plug is still
helpful to reduce block lock contention.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

As part of startup, the MMP initialization code does this:

mmp->mmp_seq = seq = cpu_to_le32(mmp_new_seq());

Next, mmp->mmp_seq is written out to disk, a delay happens, and then
the MMP block is read back in and the sequence value is tested:

if (seq != le32_to_cpu(mmp->mmp_seq)) {
	/* fail the mount */

On a LE system such as x86, the *le32* functions do nothing and this
works.  Unfortunately, on a BE system such as ppc64, this comparison
becomes:

if (cpu_to_le32(new_seq) != le32_to_cpu(cpu_to_le32(new_seq)) {
	/* fail the mount */

Except for a few palindromic sequence numbers, this test always causes
the mount to fail, which makes MMP filesystems generally unmountable
on ppc64.  The attached patch fixes this situation.
Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Current logic would print an error message only once, and then
'failed_writes' would stay at 1.  Rework the loop to increment
'failed_writes' and print the error message every
s_mmp_update_interval * 60 seconds, as intended according to the
comment.
Signed-off-by: NNikitas Angelinas <nikitas_angelinas@xyratex.com>
Signed-off-by: NAndrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: NAndreas Dilger <adilger@dilger.ca>

sysname holds "Linux" by default, i.e. what appears when doing a "uname
-s"; nodename should be used to print the machine's hostname, i.e. what
is returned when doing a "uname -n" or "hostname", and what
gethostname(2)/sethostname(2) manipulate, in order to notify the
administrator of the node which is contending to mount the filesystem.
Acked-by: NAndreas Dilger <adilger@dilger.ca>
Signed-off-by: NNikitas Angelinas <nikitas_angelinas@xyratex.com>
Signed-off-by: NAndrew Perepechko <andrew_perepechko@xyratex.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Add a sanity check to make sure ix hasn't gone beyond the valid bounds
of the extent block.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This fixes a bug which was introduced in dd68314c.  The problem
came from the test of the return value of proc_mkdir which is always
false without procfs, and this would initialization of ext4.
Signed-off-by: NFabrice Jouhaud <yargil@free.fr>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

ext4_extent_idx.e_block is __le32, so use le32_to_cpu() in
ext4_ext_search_left().
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

There are no users of the EXT4_IOC_WAIT_FOR_READONLY ioctl, and it is
also broken.  No one sets the set_ro_timer, no one wakes up us and our
state is set to TASK_INTERRUPTIBLE not RUNNING.  So remove it.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The comment describing what ext4_ext_search_right() does is incorrect.
We return 0 in *phys when *logical is the 'largest' allocated block,
not smallest.  

Fix a few other typos while we're at it.

Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>

For a long time now orlov is the default block allocator in the
ext4. It performs better than the old one and no one seems to claim
otherwise so we can safely drop it and make oldalloc and orlov mount
option deprecated.

This is a part of the effort to reduce number of ext4 options hence the
test matrix.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Acl and user_xattr mount options are no longer needed since those
features are enabled by default if configured in (seee commit
ea663336). We can not easily deprecate
mount options itself (since it is probably too early), but we can
remove it from documentation first.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Some of the error path in ext4_fill_super don't release the
resouces properly. So this patch just try to release them
in the right way.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In commit 79a77c5a, we move ext4_mb_init_backend after the allocation
of s_locality_group to avoid memory leak in error path, but there are
still some other error paths in ext4_mb_init that need to do the same
work. So this patch adds all the error patch for ext4_mb_init. And all
the pointers are reset to NULL in case the caller may double free them.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Currently, there exists a race between delayed allocated writes and
the writeback when bigalloc feature is in use. The race was because we
wanted to determine what blocks in a cluster are under delayed
allocation and we were using buffer_delayed(bh) check for it. But, the
writeback codepath clears this bit without any synchronization which
resulted in a race and an ext4 warning similar to:

EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0
		reserved data blocks

The race existed in two places.
(1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from
    writeback code path.
(2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where
    buffer_delayed(bh) is set.

To fix (1), this patch introduces a new buffer_head state bit -
BH_Da_Mapped.  This bit is set under the protection of
EXT4_I(inode)->i_data_sem when we have actually mapped the delayed
allocated blocks during the writeout time. We can now reliably check
for this bit inside ext4_find_delalloc_range() to determine whether
the reservation for the blocks have already been claimed or not.

To fix (2), it was necessary to set buffer_delay(bh) under the
protection of i_data_sem.  So, I extracted the very beginning of
ext4_map_blocks into a new function - ext4_da_map_blocks() - and
performed the required setting of bh_delay bit and the quota
reservation under the protection of i_data_sem.  These two fixes makes
the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent,
thus removing the race.

Tested: I was able to reproduce the problem by running 'dd' and
'fsync' in parallel. Also, xfstests sometimes used to reproduce this
race. After the fix both my test and xfstests were successful and no
race (warning message) was observed.

Google-Bug-Id: 4997027
Signed-off-by: NAditya Kali <adityakali@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch adds some tracepoints in ext4/extents.c and updates a tracepoint in
ext4/inode.c.

Tested: Built and ran the kernel and verified that these tracepoints work.
Also ran xfstests.
Signed-off-by: NAditya Kali <adityakali@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
    

Rename the function so it is more clear what is going on.  Also rename
the various variables so it's clearer what's happening.

Also fix a missing blocks to cluster conversion when reading the
number of reserved blocks for root.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This function really claims a number of free clusters, not blocks, so
rename it so it's clearer what's going on.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This function really returns the number of clusters after initializing
an uninitalized block bitmap has been initialized.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This function really counts the free clusters reported in the block
group descriptors, so rename it to reduce confusion.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The field bg_free_blocks_count_{lo,high} in the block group
descriptor has been repurposed to hold the number of free clusters for
bigalloc functions.  So rename the functions so it makes it easier to
read and audit the block allocation and block freeing code.

Note: at this point in bigalloc development we doesn't support
online resize, so this also makes it really obvious all of the places
we need to fix up to add support for online resize.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Now that we have implemented all of the changes needed for bigalloc,
we can finally enable it!
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

With bigalloc changes, the i_blocks value was not correctly set (it was still
set to number of blocks being used, but in case of bigalloc, we want i_blocks
to represent the number of clusters being used). Since the quota subsystem sets
the i_blocks value, this patch fixes the quota accounting and makes sure that
the i_blocks value is set correctly.
Signed-off-by: NAditya Kali <adityakali@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The default group preallocation size had been previously set to 512
blocks/clusters, regardless of the block/cluster size.  This is
probably too big for large cluster sizes.  So adjust the default so
that it is 2 megabytes or 32 clusters, whichever is larger.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Convert the free_blocks to be free_clusters to make the final revised
bigalloc changes easier to read/understand.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Convert the percpu counters s_dirtyblocks_counter and
s_freeblocks_counter in struct ext4_super_info to be
s_dirtyclusters_counter and s_freeclusters_counter.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When we are truncating (as opposed unlinking) a file, we need to worry
about partial truncates of a file, especially in the light of sparse
files.  The changes here make sure that arbitrary truncates of sparse
files works correctly.  Yeah, it's messy.

Note that these functions will need to be revisted when the punch
ioctl is integrated --- in fact this commit will probably have merge
conflicts with the punch changes which Allison Henders and the IBM LTC
have been working on.  I will need to fix this up when either patch
hits mainline.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

If we need to allocate a new block in ext4_ext_map_blocks(), the
function needs to see if the cluster has already been allocated.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The ext4_free_blocks() function now has two new flags that indicate
whether a partial cluster at the beginning or the end of the block
extents should be freed or not.  That will be up the caller (i.e.,
truncate), who can figure out whether partial clusters at the
beginning or the end of a block range can be freed.

We also have to update the ext4_mb_free_metadata() and
release_blocks_on_commit() machinery to be cluster-based, since it is
used by ext4_free_blocks().
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

In most of mballoc.c, we do everything in units of clusters, since the
block allocation bitmaps and buddy bitmaps are all denominated in
clusters.  The one place where we do deal with absolute block numbers
is in the code that handles the preallocation regions, since in the
case of inode-based preallocation regions, the start of the
preallocation region can't be relative to the beginning of the group.

So this adds a bit of complexity, where pa_pstart and pa_lstart are
block numbers, while pa_free, pa_len, and fe_len are denominated in
units of clusters.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Certain parts of the ext4 code base, primarily in mballoc.c, use a
block group number and offset from the beginning of the block group.
This offset is invariably used to index into the allocation bitmap, so
change the offset to be denominated in units of clusters.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Add bigalloc support to ext4_init_block_bitmap() and
ext4_free_blocks_after_init().
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The function ext4_free_blocks_after_init() used to be a #define of
ext4_init_block_bitmap().  This actually made it difficult to
understand how the function worked, and made it hard make changes to
support clusters.  So as an initial cleanup, I've separated out the
functionality of initializing block bitmap from calculating the number
of free blocks in the new block group.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This makes it easier to understand how ext4_init_block_bitmap() works,
and it will assist when we split out ext4_free_blocks_after_init() in
the next commit.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Change the places in fs/ext4/mballoc.c where EXT4_BLOCKS_PER_GROUP are
used to indicate the number of bits in a block bitmap (which is really
a cluster allocation bitmap in bigalloc file systems).  There are
still some places in the ext4 codebase where usage of
EXT4_BLOCKS_PER_GROUP needs to be audited/fixed, in code paths that
aren't used given the initial restricted assumptions for bigalloc.
These will need to be fixed before we can relax those restrictions.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

At least initially if the bigalloc feature is enabled, we will not
support non-extent mapped inodes, online resizing, online defrag, or
the FITRIM ioctl.  This simplifies the initial implementation.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This adds supports for bigalloc file systems.  It teaches the mount
code just enough about bigalloc superblock fields that it will mount
the file system without freaking out that the number of blocks per
group is too big.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>