Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 23 3月, 2011 4 次提交
    • T
      ptrace: Always put ptracee into appropriate execution state · 0e9f0a4a
      由 Tejun Heo 提交于 
      Currently, __ptrace_unlink() wakes up the tracee iff it's in
TASK_TRACED.  For unlinking from PTRACE_DETACH, this is correct as the
tracee is guaranteed to be in TASK_TRACED or dead; however, unlinking
also happens when the ptracer exits and in this case the ptracee can
be in any state and ptrace might be left running even if the group it
belongs to is stopped.

This patch updates __ptrace_unlink() such that GROUP_STOP_PENDING is
reinstated regardless of the ptracee's current state as long as it's
alive and makes sure that signal_wake_up() is called if execution
state transition is necessary.

Test case follows.

  #include <unistd.h>
  #include <time.h>
  #include <sys/types.h>
  #include <sys/ptrace.h>
  #include <sys/wait.h>

  static const struct timespec ts1s = { .tv_sec = 1 };

  int main(void)
  {
	  pid_t tracee;
	  siginfo_t si;

	  tracee = fork();
	  if (tracee == 0) {
		  while (1) {
			  nanosleep(&ts1s, NULL);
			  write(1, ".", 1);
		  }
	  }

	  ptrace(PTRACE_ATTACH, tracee, NULL, NULL);
	  waitid(P_PID, tracee, &si, WSTOPPED);
	  ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status);
	  waitid(P_PID, tracee, &si, WSTOPPED);
	  ptrace(PTRACE_CONT, tracee, NULL, (void *)(long)si.si_status);
	  write(1, "exiting", 7);
	  return 0;
  }

Before the patch, after the parent process exits, the child is left
running and prints out "." every second.

  exiting..... (continues)

After the patch, the group stop initiated by the implied SIGSTOP from
PTRACE_ATTACH is re-established when the parent exits.

  exiting
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
      0e9f0a4a
    • T
      ptrace: Collapse ptrace_untrace() into __ptrace_unlink() · e3bd058f
      由 Tejun Heo 提交于 
      Remove the extra task_is_traced() check in __ptrace_unlink() and
collapse ptrace_untrace() into __ptrace_unlink().  This is to prepare
for further changes.

While at it, drop the comment on top of ptrace_untrace() and convert
__ptrace_unlink() comment to docbook format.  Detailed comment will be
added by the next patch.

This patch doesn't cause any visible behavior changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
      e3bd058f
    • T
      ptrace: Clean transitions between TASK_STOPPED and TRACED · d79fdd6d
      由 Tejun Heo 提交于 
      Currently, if the task is STOPPED on ptrace attach, it's left alone
and the state is silently changed to TRACED on the next ptrace call.
The behavior breaks the assumption that arch_ptrace_stop() is called
before any task is poked by ptrace and is ugly in that a task
manipulates the state of another task directly.

With GROUP_STOP_PENDING, the transitions between TASK_STOPPED and
TRACED can be made clean.  The tracer can use the flag to tell the
tracee to retry stop on attach and detach.  On retry, the tracee will
enter the desired state in the correct way.  The lower 16bits of
task->group_stop is used to remember the signal number which caused
the last group stop.  This is used while retrying for ptrace attach as
the original group_exit_code could have been consumed with wait(2) by
then.

As the real parent may wait(2) and consume the group_exit_code
anytime, the group_exit_code needs to be saved separately so that it
can be used when switching from regular sleep to ptrace_stop().  This
is recorded in the lower 16bits of task->group_stop.

If a task is already stopped and there's no intervening SIGCONT, a
ptrace request immediately following a successful PTRACE_ATTACH should
always succeed even if the tracer doesn't wait(2) for attach
completion; however, with this change, the tracee might still be
TASK_RUNNING trying to enter TASK_TRACED which would cause the
following request to fail with -ESRCH.

This intermediate state is hidden from the ptracer by setting
GROUP_STOP_TRAPPING on attach and making ptrace_check_attach() wait
for it to clear on its signal->wait_chldexit.  Completing the
transition or getting killed clears TRAPPING and wakes up the tracer.

Note that the STOPPED -> RUNNING -> TRACED transition is still visible
to other threads which are in the same group as the ptracer and the
reverse transition is visible to all.  Please read the comments for
details.

Oleg:

* Spotted a race condition where a task may retry group stop without
  proper bookkeeping.  Fixed by redoing bookkeeping on retry.

* Spotted that the transition is visible to userland in several
  different ways.  Most are fixed with GROUP_STOP_TRAPPING.  Unhandled
  corner case is documented.

* Pointed out not setting GROUP_STOP_SIGMASK on an already stopped
  task would result in more consistent behavior.

* Pointed out that calling ptrace_stop() from do_signal_stop() in
  TASK_STOPPED can race with group stop start logic and then confuse
  the TRAPPING wait in ptrace_check_attach().  ptrace_stop() is now
  called with TASK_RUNNING.

* Suggested using signal->wait_chldexit instead of bit wait.

* Spotted a race condition between TRACED transition and clearing of
  TRAPPING.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
      d79fdd6d
    • T
      ptrace: Remove the extra wake_up_state() from ptrace_detach() · 9f2bf651
      由 Tejun Heo 提交于 
      This wake_up_state() has a turbulent history.  This is a remnant from
ancient ptrace implementation and patently wrong.  Commit 95a3540d
(ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic) removed
it but the change was reverted later by commit edaba2c5 (ptrace:
revert "ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic")
citing compatibility breakage and general brokeness of the whole group
stop / ptrace interaction.  Then, recently, it got converted from
wake_up_process() to wake_up_state() to make it less dangerous.

Digging through the mailing archives, the compatibility breakage
doesn't seem to be critical in the sense that the behavior isn't well
defined or reliable to begin with and it seems to have been agreed to
remove the wakeup with proper cleanup of the whole thing.

Now that the group stop and its interaction with ptrace are being
cleaned up, it's high time to finally kill this silliness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
      9f2bf651
  3. 05 3月, 2011 1 次提交
  5. 12 2月, 2011 1 次提交
    • T
      ptrace: use safer wake up on ptrace_detach() · 01e05e9a
      由 Tejun Heo 提交于 
      The wake_up_process() call in ptrace_detach() is spurious and not
interlocked with the tracee state.  IOW, the tracee could be running or
sleeping in any place in the kernel by the time wake_up_process() is
called.  This can lead to the tracee waking up unexpectedly which can be
dangerous.

The wake_up is spurious and should be removed but for now reduce its
toxicity by only waking up if the tracee is in TRACED or STOPPED state.

This bug can possibly be used as an attack vector.  I don't think it
will take too much effort to come up with an attack which triggers oops
somewhere.  Most sleeps are wrapped in condition test loops and should
be safe but we have quite a number of places where sleep and wakeup
conditions are expected to be interlocked.  Although the window of
opportunity is tiny, ptrace can be used by non-privileged users and with
some loading the window can definitely be extended and exploited.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      01e05e9a
  7. 28 10月, 2010 4 次提交
  9. 11 8月, 2010 1 次提交
  11. 28 5月, 2010 2 次提交
  13. 27 4月, 2010 1 次提交
  15. 10 4月, 2010 1 次提交
    • A
      ptrace: kill BKL in ptrace syscall · 5534ecb2
      由 Arnd Bergmann 提交于 
      The comment suggests that this usage is stale. There is no bkl in the
exec path so if there is a race lurking there, the bkl in ptrace is
not going to help in this regard.

Overview of the possibility of "accidental" races this bkl might
protect:

- ptrace_traceme() is protected against task removal and concurrent
read/write on current->ptrace as it locks write tasklist_lock.

- arch_ptrace_attach() is serialized by ptrace_traceme() against
concurrent PTRACE_TRACEME or PTRACE_ATTACH

- ptrace_attach() is protected the same way ptrace_traceme() and
in turn serializes arch_ptrace_attach()

- ptrace_check_attach() does its own well described serializing too.

There is no obvious race here.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roland McGrath <roland@redhat.com>
      5534ecb2
  17. 26 3月, 2010 1 次提交
    • P
      x86, perf, bts, mm: Delete the never used BTS-ptrace code · faa4602e
      由 Peter Zijlstra 提交于 
      Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      faa4602e
  19. 24 2月, 2010 1 次提交
  21. 12 2月, 2010 1 次提交
    • S
      ptrace: Add support for generic PTRACE_GETREGSET/PTRACE_SETREGSET · 2225a122
      由 Suresh Siddha 提交于 
      Generic support for PTRACE_GETREGSET/PTRACE_SETREGSET commands which
export the regsets supported by each architecture using the correponding
NT_* types. These NT_* types are already part of the userland ABI, used
in representing the architecture specific register sets as different NOTES
in an ELF core file.

'addr' parameter for the ptrace system call encode the REGSET type (using
the corresppnding NT_* type) and the 'data' parameter points to the
struct iovec having the user buffer and the length of that buffer.

	struct iovec iov = { buf, len};
	ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);

On successful completion, iov.len will be updated by the kernel specifying
how much the kernel has written/read to/from the user's iov.buf.

x86 extended state registers are primarily exported using this interface.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100211195614.886724710@sbs-t61.sc.intel.com>
Acked-by: NHongjiu Lu <hjl.tools@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      2225a122
  23. 24 9月, 2009 1 次提交
    • O
      ptrace: __ptrace_detach: do __wake_up_parent() if we reap the tracee · a7f0765e
      由 Oleg Nesterov 提交于 
      The bug is old, it wasn't cause by recent changes.

Test case:

	static void *tfunc(void *arg)
	{
		int pid = (long)arg;

		assert(ptrace(PTRACE_ATTACH, pid, NULL, NULL) == 0);
		kill(pid, SIGKILL);

		sleep(1);
		return NULL;
	}

	int main(void)
	{
		pthread_t th;
		long pid = fork();

		if (!pid)
			pause();

		signal(SIGCHLD, SIG_IGN);
		assert(pthread_create(&th, NULL, tfunc, (void*)pid) == 0);

		int r = waitpid(-1, NULL, __WNOTHREAD);
		printf("waitpid: %d %m\n", r);

		return 0;
	}

Before the patch this program hangs, after this patch waitpid() correctly
fails with errno == -ECHILD.

The problem is, __ptrace_detach() reaps the EXIT_ZOMBIE tracee if its
->real_parent is our sub-thread and we ignore SIGCHLD.  But in this case
we should wake up other threads which can sleep in do_wait().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a7f0765e
  25. 07 7月, 2009 1 次提交
  27. 24 6月, 2009 1 次提交
  29. 19 6月, 2009 5 次提交
  31. 05 6月, 2009 1 次提交
    • O
      ptrace: revert "ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic" · edaba2c5
      由 Oleg Nesterov 提交于 
      Commit 95a3540d ("ptrace_detach: the wrong
wakeup breaks the ERESTARTxxx logic") removed the "extra"
wake_up_process() from ptrace_detach(), but as Jan pointed out this breaks
the compatibility.

I believe the changelog is right and this wake_up() is wrong in many
ways, but GDB assumes that ptrace(PTRACE_DETACH, child, 0, 0) always
wakes up the tracee.

Despite the fact this breaks SIGNAL_STOP_STOPPED/group_stop_count logic,
and despite the fact this wake_up_process() can break another
assumption: PTRACE_DETACH with SIGSTOP should leave the tracee in
TASK_STOPPED case.  Because the untraced child can dequeue SIGSTOP and
call do_signal_stop() before ptrace_detach() calls wake_up_process().

Revert this change for now.  We need some fixes even if we we want to keep
the current behaviour, but these fixes are not for 2.6.30.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      edaba2c5
  33. 11 5月, 2009 1 次提交
  35. 27 4月, 2009 1 次提交
  37. 14 4月, 2009 1 次提交
  39. 09 4月, 2009 1 次提交
  41. 07 4月, 2009 1 次提交
  43. 03 4月, 2009 5 次提交
  45. 10 3月, 2009 1 次提交
  47. 14 1月, 2009 1 次提交
  49. 20 12月, 2008 1 次提交
    • M
      x86, bts: add fork and exit handling · bf53de90
      由 Markus Metzger 提交于 
      Impact: introduce new ptrace facility

Add arch_ptrace_untrace() function that is called when the tracer
detaches (either voluntarily or when the tracing task dies);
ptrace_disable() is only called on a voluntary detach.

Add ptrace_fork() and arch_ptrace_fork(). They are called when a
traced task is forked.

Clear DS and BTS related fields on fork.

Release DS resources and reclaim memory in ptrace_untrace(). This
releases resources already when the tracing task dies. We used to do
that when the traced task dies.
Signed-off-by: NMarkus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      bf53de90