Add a flag to spec field so that the EAPD inversion can be checked
outside the relevant control callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On Realtek codecs, a digital mic pin is connected often only to a single
ADC.  But the parser tries to set up all ADCs no matter whether the
digital mic is available, and results in non-selectable input source.

This patch adds a check of input-source availability of each ADC, and
excludes ones that don't support all input sources.

Reference: Novell bnc#561235
	http://bugzilla.novell.com/show_bug.cgi?id=561235Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Realtek codecs may have "PCM" and "Line-Out" playback switches, and
they can be slaves for vmaster.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is an updated patch for the Apple iMac 9,1 model to add sound.
Original patch posted here:
http://article.gmane.org/gmane.linux.alsa.devel/61361/match=

I have been using this patch for a while now
and have to say it works vary well, except for a few minor 
things:

	With the iMac 24-inch 3.06GHz Intel Core 2 Duo
	everything seems to be working as it should,
        although I have not looked into the microphone
	(never really use one, nor have any apps to test,
	my guess is it doesn't work, or I never figured out how
	to get it to work).

	With the iMac 24-inch 2.66GHz Intel Core 2 Duo
	everything is the same as with the above machine 
	except I'm hearing a light scratchy/distortion noise
	come out of the speakers when using headphones(above machine
	does not do this).

Other than that the sound level is great(especially with good Dj headphones).
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Tested-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The previous hack for replacing the codec name give memory leaks at
error paths.  This patch fixes them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixed List:
   1. Add alc_read_coef_idx function
   2. Add ALC661 ALC259
   3. Add ALC892 ALC888VD
Signed-off-by: NKailang Yang <kailang@realtek.com.tw>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP dv3 requires position_fix=1.

Reference: Novell bnc#555935
	https://bugzilla.novell.com/show_bug.cgi?id=555935Signed-off-by: NTakashi Iwai <tiwai@suse.de>

FSC Amilo Pi 1505 has a buggy BIOS and doesn't set up the HP and
speaker pins properly.  Add the pinfix entry for that.

Reference: Novell bnc#557403
	https://bugzilla.novell.com/show_bug.cgi?id=557403Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The NID 0x1a of Conexant 5047 chip is a mic boost volume only with
the output amp unlike 5045 chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

MSI Wind U115 seems to require position_fix=1 explicitly.
Otherwise it screws up PulseAudio.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

STAC/IDT codecs seem to behave weird when SET_PIN_SENSE verb is issued
before reading the jack-detection although the TRIG_REQ pin capability
is given by the hardware.

Since snd_hda_jack_detect() issues the SET_PIN_SENSE verb simply judging
from the pincap, we have to revert the change in the commit
  d56757ab
    ALSA: hda - Replace the rest of jack-detections with snd_hda_jack_detect()
to plain GET_PIN_SENSE verb without triggering.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4792

Cristian reported that these models have really bad sound above 6 dB
and proposed the original patch. I've updated the comment to reflect
this change.
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Reported-by: Cristian Klein
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell Vostro 1015n uses Conexant CX20583-10Z (0x14f1:5067). Patch is
based on "olpc-xo-1_5" branch. Dell uses digital mic.
Signed-off-by: NEinar Rünkaru <einarry@smail.ee>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit f2624791.

Łukasz Wojniłowicz reported that the change causes both internal and
external mics not working any more.  The headphone jacking issue was
fixed by his previous patch, it's better to revert to acer-aspire-4930g
model.
Reported-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CONFIG_SND_JACK needs to be selected explicitly only when INPUT=y or
INPUT_SND.  The current way, INPUT=SND_HDA_INTEL isn't strict enough.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fixes first issue from comment 0021423 in bug 0004317 for Acer Aspire 5930g
Signed-off-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the quirk for Acer Aspire 5930G from model=acer-aspire-4930g to
model=acer-aspre-6530g.  The tuba bass gets muted along with the other
built-in speakers upon headphones insertion, the internal mic works
perfectly etc.
Reported-by: NClaudio Viano <claudio.viano@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The mute-LED isn't synchronized with the actual mute state on some
HP laptops with IDT 92HD83xxx codecs.  A similar hack using
check_power_status callback is added for this codec, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The dual-headphone mode with STAC/IDT codecs is useful only for machines
that have two (or more) built-in headphones.

But, some HP laptops give multiple headphone pin configs, one for the
built-in and another for the separate (likely a docking station) one.
This results in a missing speaker volume control.

This patch adds more check for the dual-headphone mode to avoid this
problem.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Don't change channel count if not necessary.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We tracked down the first-0.5s-hdmi-audio-samples-lost problem to the
AC_VERB_SET_CHANNEL_STREAMID command. It is suspected that many HDMI
sinks need some time to adapt to the new state.

The workaround is to avoid changing stream id/format whenever possible.
Proposed by David.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remember the active infoframe, so as to avoid stop/restart infoframe
transmission when switching between audio clips of the same format.

Proposed by Shang and David.

CC: Shane W <shane-alsa@csy.ca>
CC: David Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

And make it right when called for more than one times.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This avoids lost of presence info on module reloading.
The presence info used to be only updated at the (rare) hotplug events.

Proposed by David, thanks!

CC: David Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This helps merge duplicate code.

v2: add snd_hda_jack_detect() and comments recommended by Takashi.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reported-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC262 has a quirk entry matching with all Sony Vaio laptops
to use model=sony-assamd as default.  But, model=auto works much better
for new models in the recent driver versions, thus it's safer to disable
that default quirk entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Vaio type G laptop doesn't work with the current quirk setup.
After some tests, it turned out that it should be model=auto as default.
Reported-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Disable beep-related codes when CONFIG_SND_HDA_INPUT_BEEP isn't set.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The beep_mode option value was wrongly defined: it must be 0 = off and
1 = on.

Also, evaluate the beep_mode value at snd_hda_attach_beep_device()
properly so that no device is created when beep_mode=0 is given.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The snd_hda_pcm_type_name array is local only.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>