umount dquot flush call.

SGI-PV: 946444
SGI-Modid: xfs-linux-melb:xfs-kern:24680a
Signed-off-by: NNathan Scott <nathans@sgi.com>

sources.

SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:24659a
Signed-off-by: NNathan Scott <nathans@sgi.com>

incorrectly limit people using this interface to size IO buffers.

SGI-PV: 910890
SGI-Modid: xfs-linux-melb:xfs-kern:24657a
Signed-off-by: NNathan Scott <nathans@sgi.com>

understood.

SGI-PV: 912426
SGI-Modid: xfs-linux-melb:xfs-kern:202962a
Signed-off-by: NNathan Scott <nathans@sgi.com>

consistent.

SGI-PV: 941645
SGI-Modid: xfs-linux-melb:xfs-kern:202961a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 945483
SGI-Modid: xfs-linux-melb:xfs-kern:202638a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

spotting these.

SGI-PV: 946028
SGI-Modid: xfs-linux-melb:xfs-kern:202617a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

The assertion failure came from XFS QA41. The fix is done by enabling
truncate for delayed block in xfs_inactive.

SGI-PV: 945412
SGI-Modid: xfs-linux-melb:xfs-kern:202521a
Signed-off-by: NYingping Lu <yingping@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

filesystem

SGI-PV: 912426
SGI-Modid: xfs-linux-melb:xfs-kern:202355a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

in showargs.

SGI-PV: 912426
SGI-Modid: xfs-linux-melb:xfs-kern:24383a
Signed-off-by: NNathan Scott <nathans@sgi.com>

well.  Also provides a mechanism for inheriting this property from the
parent directory for new files.

SGI-PV: 945264
SGI-Modid: xfs-linux-melb:xfs-kern:24367a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 945264
SGI-Modid: xfs-linux-melb:xfs-kern:24366a
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 912426
SGI-Modid: xfs-linux-melb:xfs-kern:201981a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:201882a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

SGI-PV: 941804
SGI-Modid: xfs-linux-melb:xfs-kern:201702a
Signed-off-by: NChristoph Hellwig <hch@sgi.com>
Signed-off-by: NNathan Scott <nathans@sgi.com>

Mark mutex_lock() and mutex_lock_interruptible() as might_sleep()
functions.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Call the mutex slowpath more conservatively - e.g.  FRAME_POINTERS can
change the calling convention, in which case a direct branch to the
slowpath becomes illegal.  Bug found by Hugh Dickins.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unnecessary (and incorrect) inclusion of asm/mutex.h, pointed out
by David Howells.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NBart De Schuymer <bdschuym@pandora.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jean-Luc Leger <reiga@dspnet.fr.eu.org> reported this alternative 
dependency on a non-existing symbol.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

EXPORT_SYMBOL's do nowadays belong to the files where the actual
functions are.

Moving the module_init/module_exit to the file with the actual functions
has the advantage of saving a few bytes due to the removal of two
functions.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NJean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Small cleanups for drivers/atm/zatm.c
 Get rid of unneeded cast of kmalloc() return value.
 Small whitespace/CodingStyle/formatting cleanup (since I was in there anyway).
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get rid of needless casting of kmalloc() return value in net/
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Decrease the number of pointer derefs in net/rxrpc/connection.c

Benefits of the patch:
 - Fewer pointer dereferences should make the code slightly faster.
 - Size of generated code is smaller
 - improved readability
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Martin Murray <murrayma@citi.umich.edu>

Sanity check nlmsg_len during netlink_rcv_skb.  An nlmsg_len == 0 can
cause infinite loop in kernel, effectively DoSing machine.  Noted by
Matin Murray.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The connection tracking timeout variables are unsigned long, but
proc_dointvec_jiffies is used with sizeof(unsigned int) in the sysctl
tables. Since there is no proc_doulongvec_jiffies function, change the
timeout variables to unsigned int.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

->print and ->print_range are not used (and apparently never were).
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_nat_mangle_tcp_packet doesn't return NF_* values but 0/1 for
failure/success.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PPTP NAT helper calculates the offset at which the packet needs
to be mangled as difference between two pointers to the header. With
non-linear skbs however the pointers may point to two seperate buffers
on the stack and the calculation results in a wrong offset beeing
used.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an inbound PPTP_IN_CALL_REQUEST packet is received the
PPTP NAT helper uses a NULL pointer in pointer arithmentic to
calculate the offset in the packet which needs to be mangled
and corrupts random memory or crashes.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Don't wrap entire file in #ifdef CONFIG_NETFILTER, remove a few
unneccessary includes.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This changes some memcmp(one,two,ETH_ALEN) to compare_ether_addr(one,two).
Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The congestion ops and af_ops in the inet_connection_sock
can be const.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This requires the proper capabilities for the moxa bios update ioctl's.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a5 register corruption when processing user space signals handlers.
We need to save a5 through each contenxt change.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're starting a number of big applications (memory footprint app.
1MByte) on our Arcturus uC5272.  Therefore memory fragmentation is a
real pain for us.  We've switched to uClinux-2.4.27-uc1 and found that
page_alloc2 fragments the memory heavily.

Digging into it we found a bug in the find_next_zero_bit function in the
m68knommu/bitops.h file.  if the size isn't a multiple of 32 than the
upper bits of the last word to be searched should be masked.  But the
functions masks the lower bits of the last word because it uses a right
shift instead of a left shift operator.

Patch submitted by Sascha Smejkal <s.smejkal@centersystems.at>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modify the initial trace output (which is based on flags in the binary
header) so that it is not done until after the magic number check.  This
may well not be a flat format binary, so the flags could be invalid.
(Prime example, running a script).

Changes prompted by patches from Stuart Hughs.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the hardware interrupt priority to a different value for each
attached ColdFire serial port.  According to the CPU documentation you
should not use the same combination of level/priority on more than one
device.  People have reported odd serial port behavior with them set the
same.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow the ColdFire FEC ethernet driver to be enabled on the M520x CPU
family.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>