- 11 10月, 2007 3 次提交
-
-
由 Gerrit Renker 提交于
In this patch, duplicated code is removed for the case when a Reset packet is sent from a connected socket. This code duplication is between dccp_make_reset and dccp_transmit_skb, which already contained an (up to now entirely unused) switch statement to fill in the reset code from the DCCP_SKB_CB. The only thing that has been removed is the call to dst_clone(dst), since the queue_xmit functions use sk_dst_cache anyway. I wasn't sure which purpose inet_sk_rebuild_header served, so I left it in. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
This adds a FIXME to signal that the function dccp_send_delayed_ack is nowhere used in the entire DCCP/CCID code. Using a delayed Ack timer is suggested in 11.3 of RFC 4340, but it has also rather subtle implications for the Ack-Ratio-accounting. CCID2 does not use this (maybe it should). I think leaving the function in is good, in case someone wants to implement this. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 Gerrit Renker 提交于
The parameter `seq' of dccp_send_sync() is in fact an acknowledgement number and not a sequence number - thus renamed by this patch into `ackno'. Secondly, a `critical' warning is added when a Sync/SyncAck could not be sent. Sanity: I have checked all other functions that are called in dccp_transmit_skb, there are no clashes with the use of dccpd_ack_seq; no other function is using this slot at the same time. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2007 1 次提交
-
-
由 Gerrit Renker 提交于
This adds more detail in the wait_for_ccid packet scheduling loop. In particular, it informs about (i) when delay is used and (ii) why a packet is discarded. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2007 1 次提交
-
-
由 Gerrit Renker 提交于
The TX CCID needs the write_xmit_timer for delaying packet sends. Previously this timer was only activated on active (connecting) sockets. This patch initialises the write_xmit_timer in sync with the other timers, i.e. the timer will be ready on any socket. This is used by applications with a listening socket which start to stream after receiving an initiation by the client. The write_xmit_timer is stopped when the application closes, as before. Was tested to work and to remove the timer bug reported on dccp@vger. Also moved timer initialisation into timer.c (static). Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 3月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NPaul Moore <paul.moore@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2007 1 次提交
-
-
由 David S. Miller 提交于
Revert 93173112 We can't elide the skb_set_owner_w() here because things like certain netfilter targets (such as owner MATCH) need a socket to be set on the SKB for correct operation. Thanks to Jan Engelhardt and other netfilter list members for pointing this out. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2006 3 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
That accumulated over the last months hackaton, shame on me for not using git-apply whitespace helping hand, will do that from now on. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This adds a (debug) warning message which is triggered whenever a packet is discarded due to send failure. It also adds a conditional, so that an interruption during dccp_wait_for_ccid is not treated as a `BUG': the rationale is that interruptions are external, whereas bug warnings are concerned with the internals. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Ian McDonald 提交于
It simplifies waiting for the CCID module to signal that a packet is ready to be sent. Other simplifications flow on from this such as removing constants. As a result of this EAGAIN is not returned any more by dccp_wait_for_ccid (which would otherwise lead to unnecessarily discarding the packet in dccp_write_xmit). Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 03 12月, 2006 10 次提交
-
-
由 Gerrit Renker 提交于
This patch implements a suggestion by Ian McDonald and 1) Avoids tests against negative packet lengths by using unsigned int for packet payload lengths in the CCID send_packet()/packet_sent() routines 2) As a consequence, it removes an now unnecessary test with regard to `len > 0' in ccid3_hc_tx_packet_sent: that condition is always true, since * negative packet lengths are avoided * ccid3_hc_tx_send_packet flags an error whenever the payload length is 0. As a consequence, ccid3_hc_tx_packet_sent is never called as all errors returned by ccid_hc_tx_send_packet are caught in dccp_write_xmit 3) Removes the third argument of ccid_hc_tx_send_packet (the `len' parameter), since it is currently always set to skb->len. The code is updated with regard to this parameter change. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This reaps the benefit of the earlier patch, which changed the type of CCID 3 states to use enums, in that many conditions are now simplified and the number of possible (unexpected) values is greatly reduced. In a few instances, this also allowed to simplify pre-conditions; where care has been taken to retain logical equivalence. [DCCP]: Introduce a consistent BUG/WARN message scheme This refines the existing set of DCCP messages so that * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts * DCCP_CRIT (for severe warnings) is not rate-limited * DCCP_WARN() is introduced as rate-limited wrapper Using these allows a faster and cleaner transition to their original counterparts once the code has matured into a full DCCP implementation. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This patch does not change code; it performs some trivial clean/tidy-ups: * removal of a `debug_prefix' string in favour of the already existing dccp_role(sk) * add documentation of structures and constants * separated out the cases for invalid packets (step 1 of the packet validation) * removing duplicate statements * combining declaration & initialisation Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
Throughout the TCP/DCCP (and tunnelling) code, it often happens that the return code of a transmit function needs to be tested against NET_XMIT_CN which is a value that does not indicate a strict error condition. This patch uses a macro for these recurring situations which is consistent with the already existing macro net_xmit_errno, saving on duplicated code. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This * resolves a FIXME - DCCPv6 connections started all with an initial sequence number of 1; * provides a redirection `secure_dccpv6_sequence_number' in case the init_sequence_v6 code should be updated later; * concentrates the update of S.GAR into dccp_connect_init(); * removes a duplicate dccp_update_gss() in ipv4.c; * uses inet->dport instead of usin->sin_port, due to the following assignment in dccp_v4_connect(): inet->dport = usin->sin_port; Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
Problem:
-
由 Gerrit Renker 提交于
This patch does the following: a) introduces variable-length checksums as specified in [RFC 4340, sec. 9.2] b) provides necessary socket options and documentation as to how to use them c) basic support and infrastructure for the Minimum Checksum Coverage feature [RFC 4340, sec. 9.2.1]: acceptability tests, user notification and user interface In addition, it (1) fixes two bugs in the DCCPv4 checksum computation: * pseudo-header used checksum_len instead of skb->len * incorrect checksum coverage calculation based on dccph_x (2) removes dccp_v4_verify_checksum() since it reduplicates code of the checksum computation; code calling this function is updated accordingly. (3) now uses skb_checksum(), which is safer than checksum_partial() if the sk_buff has is a non-linear buffer (has pages attached to it). (4) fixes an outstanding TODO item: * If P.CsCov is too large for the packet size, drop packet and return. The code has been tested with applications, the latest version of tcpdump now comes with support for partial DCCP checksums. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Ian McDonald 提交于
This patch fixes data being spewed into the logs continually. As the code stood if there was a large queue and long delays timeo would go down to zero and never get reset. This fixes it by resetting timeo. Put constant into header as well. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This is a code simplification: it combines three often recurring operations into one inline function, * allocate `len' bytes header space in skb * fill these `len' bytes with zeroes * cast the start of this header space as dccp_hdr Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 David S. Miller 提交于
The data itself is already charged to the SKB, doing the skb_set_owner_w() just generates a lot of noise and extra atomics we don't really need. Lmbench improvements on lat_tcp are minimal: before: TCP latency using localhost: 23.2701 microseconds TCP latency using localhost: 23.1994 microseconds TCP latency using localhost: 23.2257 microseconds after: TCP latency using localhost: 22.8380 microseconds TCP latency using localhost: 22.9465 microseconds TCP latency using localhost: 22.8462 microseconds Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 1 次提交
-
-
由 Ian McDonald 提交于
This adds transmit buffering to DCCP. I have tested with CCID2/3 and with loss and rate limiting. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 21 3月, 2006 7 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
And not the silly LIMIT_NETDEBUG and silently return without inserting the option requested. Also drop some old debugging messages associated to option insertion. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Using this also provides opportunities for introducing inet_csk_alloc_skb that would call alloc_skb, account it to the sock and skb_reserve(max_header), but I'll leave this for later, for now using sk_prot->max_header consistently is enough. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
With this patch in place we can break down the complexity by better compartmentalizing the code that is common to ipv6 and ipv4. Now we have these modules: Module Size Used by dccp_diag 1344 0 inet_diag 9448 1 dccp_diag dccp_ccid3 15856 0 dccp_tfrc_lib 12320 1 dccp_ccid3 dccp_ccid2 5764 0 dccp_ipv4 16996 2 dccp 48208 4 dccp_diag,dccp_ccid3,dccp_ccid2,dccp_ipv4 dccp_ipv6 still requires dccp_ipv4 due to dccp_ipv6_mapped, that is the next target to work on the "hey, ipv4 is legacy, I only want ipv6 dude!" direction. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
dccp_make_response is shared by ipv4/6 and the ipv6 code was recalculating the checksum, not good, so move the dccp_v4_checksum call to dccp_v4_send_response. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Renaming it to dccp_send_reset and moving it from the ipv4 specific code to the core dccp code. This fixes some bugs in IPV6 where timers would send v4 resets, etc. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
Still needs more work, but boots and doesn't crashes, even does some negotiation! 18:38:52.174934 127.0.0.1.43458 > 127.0.0.1.5001: request <change_l ack_ratio 2, change_r ccid 2, change_l ccid 2> 18:38:52.218526 127.0.0.1.5001 > 127.0.0.1.43458: response <nop, nop, change_l ack_ratio 2, confirm_r ccid 2 2, confirm_l ccid 2 2, confirm_r ack_ratio 2> 18:38:52.185398 127.0.0.1.43458 > 127.0.0.1.5001: <nop, confirm_r ack_ratio 2, ack_vector0 0x00, elapsed_time 212> :-) Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2006 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
To help in reducing the number of include dependencies, several files were touched as they were getting needed headers indirectly for stuff they use. Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had linux/dccp.h include twice. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
As DCCP needs to be called in the same spots. Now we have a member in inet_sock (is_icsk), set at sock creation time from struct inet_protosw->flags (if INET_PROTOSW_ICSK is set, like for TCP and DCCP) to see if a struct sock instance is a inet_connection_sock for places like the ones in ip_sockglue.c (v4 and v6) where we previously were looking if sk_type was SOCK_STREAM, that is insufficient because we now use the same code for DCCP, that has sk_type SOCK_DCCP. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Basically exports a similar set of functions as the one exported by the non-AF specific TCP code. In the process moved some non-AF specific code from dccp_v4_connect to dccp_connect_init and moved the checksum verification from dccp_invalid_packet to dccp_v4_rcv, so as to use it in dccp_v6_rcv too. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
And make the core DCCP code AF agnostic, just like TCP, now its time to work on net/dccp/ipv6.c, we are close to the end! Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2005 2 次提交
-
-
由 Herbert Xu 提交于
Here is a complimentary insurance policy for those feeling a bit insecure. You don't have to accept this. However, if you do, you can't blame me for it :) > 1) dccp_transmit_skb sets the owner for all packets except data packets. We can actually verify this by looking at pkt_type. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Herbert Xu 提交于
While we're at it let's reorganise the set_owner_w calls a little so that: 1) dccp_transmit_skb sets the owner for all packets except data packets. 2) Add dccp_skb_entail to set owner for packets queued for retransmission. 3) Make dccp_transmit_skb static. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 28 10月, 2005 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 10月, 2005 3 次提交
-
-
由 Herbert Xu 提交于
Turns out the problem has nothing to do with use-after-free or double-free. It's just that we're not clearing the CB area and DCCP unlike TCP uses a CB format that's incompatible with IP. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NIan McDonald <imcdnzl@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Herbert Xu 提交于
icmp_send doesn't use skb->sk at all so even if skb->sk has already been freed it can't cause crash there (it would've crashed somewhere else first, e.g., ip_queue_xmit). I found a double-free on an skb that could explain this though. dccp_sendmsg and dccp_write_xmit are a little confused as to what should free the packet when something goes wrong. Sometimes they both go for the ball and end up in each other's way. This patch makes dccp_write_xmit always free the packet no matter what. This makes sense since dccp_transmit_skb which in turn comes from the fact that ip_queue_xmit always frees the packet. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Herbert Xu 提交于
David S. Miller <davem@davemloft.net> wrote: > One thing you can probably do for this bug is to mark data packets > explicitly somehow, perhaps in the SKB control block DCCP already > uses for other data. Put some boolean in there, set it true for > data packets. Then change the test in dccp_transmit_skb() as > appropriate to test the boolean flag instead of "skb_cloned(skb)". I agree. In fact we already have that flag, it's called skb->sk. So here is patch to test that instead of skb_cloned(). Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NIan McDonald <imcdnzl@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-