This removes the NO_MMU Kconfig parameter,
which was no longer used anywhere in the source code
and Makefiles.

This also updates a comment refering to this parameter.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Signed-off-by: NMichal Simek <monstr@monstr.eu>

Extend PVR reg decoding.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

The main reason that this driver can be used by ARM
and PPC. The part of preparing of move to generic location.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Update dates in header and add Xilinx to it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Remove unused headers.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

- Use of_iomap
- Use of_property_read_u32
- Fix printk
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Simplify timer initialization and prepare the driver
for moving to drivers/clocksource folder.
Also remove system-timer property from binding because
the name is too generic.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

asm/irq.h is included in linux/irq.h
asm/prom.h and linux/init.h is not needed
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

- Use of_iomap
- Use of_property_read_u32
- Fix printk
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

- Move init_IRQ to irq.c
- Use IRQCHIP_DECLARE macro
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Update dates in header and add Xilinx to it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Trivial.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This was experimental feature which has never been
widely used because it expects GCC behaviour.
Also remove INTC_BASE and TIMER_BASE macros.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Most architectures use the same implementation. Collapse the common ones
into a single weak function that can be overridden.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

On some PAE architectures, the entire range of physical memory could reside
outside the 32-bit limit.  These systems need the ability to specify the
initrd location using 64-bit numbers.

This patch globally modifies the early_init_dt_setup_initrd_arch() function to
use 64-bit numbers instead of the current unsigned long.

There has been quite a bit of debate about whether to use u64 or phys_addr_t.
It was concluded to stick to u64 to be consistent with rest of the device
tree code. As summarized by Geert, "The address to load the initrd is decided
by the bootloader/user and set at that point later in time. The dtb should not
be tied to the kernel you are booting"

More details on the discussion can be found here:
https://lkml.org/lkml/2013/6/20/690
https://lkml.org/lkml/2012/9/13/544Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Other architectures don't do it, and it conflicts with the extern'd definition
in include/linux/kgdb.h.

The patch fails checkpatch but it reflects current
functions declaration and solved compilation error.
Signed-off-by: NGraeme Smecher <gsmecher@threespeedlogic.com>
CC: Michal Simek <monstr@monstr.eu>
CC: linux-kernel@vger.kernel.org
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Compilation warning:
arch/microblaze/kernel/cpu/cache.c:148:2: warning:
 'temp' is used uninitialized in this function [-Wuninitialized]
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Microblaze requires to enable IRQ in cpu_idle loop.

It should be the part of this patch:
"microblaze: Use generic idle loop"
(sha1: e962bb9e)
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Update PVR values based on reference manual.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

r6 stores pointer to ramdisk and shouldn't
be used before it is passed to machine_early_init.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Register the irq_domain created during initialization as the default so
that device drivers can pass NULL to irq_create_mapping and get a
virtual irq to pass to request_irq.
Signed-off-by: NDan Christensen <opello@opello.org>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[<ffffffff8234a07e>]  [<ffffffff8234a07e>] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [<ffffffff81000312>] do_one_initcall+0x122/0x170
  [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  [<ffffffff81c4776e>] kernel_init+0xe/0xf0
  [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>		[tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both dump_stack() and show_stack() are currently implemented by each
architecture.  show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack().  On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.

The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().

There's no reason to require archs to implement two separate but mostly
identical functions.  It leads to unnecessary subtle information.

This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin.  Blackfin's
dump_stack() does something wonky that I don't understand.

Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information.  This is used
in blackfin.

This patch brings the following behavior changes.

* On some archs, an extra level in backtrace for show_stack() could be
  printed.  This is because the top frame was determined in
  dump_stack() on those archs while generic dump_stack() can't do that
  reliably.  It can be compensated by inlining dump_stack() but not
  sure whether that'd be necessary.

* Most archs didn't use to print debug info on dump_stack().  They do
  now.

An example WARN dump follows.

 WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
 Hardware name: empty
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
  0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
  ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
  0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
 Call Trace:
  [<ffffffff81c614dc>] dump_stack+0x19/0x1b
  [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
  [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8234a071>] init_workqueues+0x35/0x505
  ...

v2: CPU number added to the generic debug info as requested by s390
    folks and dropped the s390 specific dump_stack().  This loses %ksp
    from the debug message which the maintainers think isn't important
    enough to keep the s390-specific dump_stack() implementation.

    dump_stack_print_info() is moved to kernel/printk.c from
    lib/dump_stack.c.  Because linkage is per objecct file,
    dump_stack_print_info() living in the same lib file as generic
    dump_stack() means that archs which implement custom dump_stack()
    - at this point, only blackfin - can't use dump_stack_print_info()
    as that will bring in the generic version of dump_stack() too.  v1
    The v1 patch broke build on blackfin due to this issue.  The build
    breakage was reported by Fengguang Wu.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>	[s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The early console implementations are the same all over the place.  Move
the print function to kernel/printk and get rid of the copies.

[akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list]
[paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Tested-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The microblaze idle loop provides a polling and a non polling version,
which are suprisingly both polling, just with slightly different
instrumentation. Remove them and use the generic poller.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NCc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Link: http://lkml.kernel.org/r/20130321215234.687590459@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

enable/disable_hlt() does not need to be exported and can be killed on
architectures which do not use it at all.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NCc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130321215233.377959540@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Commit def82035 ("microblaze idle: delete pm_idle") introduced the following
compile error:

	arch/microblaze/kernel/process.c: In function 'cpu_idle':
	arch/microblaze/kernel/process.c:100: error: 'idle' undeclared (first use in this function)
	arch/microblaze/kernel/process.c:100: error: (Each undeclared identifier is reported only once
	arch/microblaze/kernel/process.c:100: error: for each function it appears in.)
	arch/microblaze/kernel/process.c:106: error: implicit declaration of function 'idle'

This patch fixes it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

pm_idle on microblaze served no purpose.
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: microblaze-uclinux@itee.uq.edu.au

Based on the patch:
"lib: reduce the use of module.h wherever possible"
(sha1: 8bc3bcc9)
fix all microblaze files which are not modules.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Fix coding style issues reported by checkpatch.pl.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

Function must return any value.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add .gitignore entries for files which are generated during the build process.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Better not to break block which do work together.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We need to keep building sigframes until no pending signals remain.
Wrap do_notify_resume() calls into loops; do _not_ allow syscall
restart logics to trigger after the first iteration.

Incidentally, comments about pending signals that should (somehow)
be in r18 are pure BS.  Doesn't work that way and cannot work that
way, sorry...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

solution a-la arm one - pick a callee-saved register (r30), set it
non-zero when entering a syscall, have sigreturn wrapper zero it out
and pass the value in it to do_notify_resume() as "in_syscall" (actually,
"restarts allowed") argument.

Note that we don't give a damn about ret_from_fork() - return value
is not restart-worthy anyway.

Possible remaining bug: on !MMU we still have _debug_exception()
restartable.  If it hits with -ERESTART_... accidentally in r3, fun happens.
MMU does _not_ have _debug_exception() restartable.  If that's decided to
be a bug (as I strongly suspect it to be), we'll just need to replace
setting r30 to 1 with setting r30 to 0 in !MMU _debug_exception().
Up to microblaze maintainers...

[folded a fix from Michal]
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Only one caller hasn't done it in assembler - work_pending on !MMU.
Everything else can't reach do_notify_resume() if we are returning
to kernel mode, so move that check to that sole caller and make
do_notify_resume() reachable only when returning to userland.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add finit_module syscall to the syscall list.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>