The current code uses a mix of sping_lock() & spin_lock_irqsave(). This can
lead to deadlock with the correct timming & cprng_get_random() + cprng_reset()
sequence.
I've converted them to bottom half locks since all three user grab just a BH
lock so this runs probably in softirq :)
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the support for testing specific implementations.
This should only be used in very specific situations.  Right now
this means specific implementations of random number generators.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As it stands we use chainiv for sync algorithms and eseqiv for
async algorithms.  However, when there is more than one CPU
chainiv forces all processing to be serialised which is usually
not what you want.  Also, the added overhead of eseqiv isn't that
great.

Therefore this patch changes the default sync geniv on SMP machines
to eseqiv.  For the odd situation where the overhead is unacceptable
then chainiv is still available as an option.

Note that on UP machines chainiv is still preferred over eseqiv
for sync algorithms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When a sync givcipher algorithm is requested, if an async version
of the same algorithm already exists, then we will loop forever
without ever constructing the sync version based on a blkcipher.

This is because we did not include the requested type/mask when
getting a larval for the geniv algorithm that is to be constructed.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Until hash test vectors grow longer than 256 bytes, the only
purpose of the check is to generate a gcc warning.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the aes-intel module is loaded on a system that does not have the
AES instructions, it prints

    Intel AES-NI instructions are not detected.

at level KERN_ERR.  Since aes-intel is aliased to "aes" it will be tried
whenever anything uses AES and spam the console.  This doesn't match
existing practice for how to handle "no hardware" when initializing a
module, so downgrade the message to KERN_INFO.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ANSI CPRNG has no dependence on FIPS support.  FIPS support however,
requires the use of the CPRNG.  Adjust that depedency relationship in Kconfig.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We should return 0/-ENOENT instead of 1/0 when testing by name.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The RNG should work with FIPS disabled.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This adds the 'alg' module parameter to be able to test an
algorithm by name. If the algorithm type is not ad-hoc
clear for a algorithm (e.g. pcrypt, cryptd) it is possilbe
to set the algorithm type with the 'type' module parameter.
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Just started running fips cavs test vectors through an s390x system
for giggles, and discovered that I missed patching s390's arch-specific
des3 implementation w/an earlier des3 patch to permit weak keys.

This change adds the same flag tweaks as
ad79cdd7 (crypto: des3_ede - permit
weak keys unless REQ_WEAK_KEY set) for s390's des3 implementation,
yields expected test results now.
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

FIPS-140 requires that all random number generators implement continuous self
tests in which each extracted block of data is compared against the last block
for repetition.  The ansi_cprng implements such a test, but it would be nice if
the hw rng's did the same thing.  Obviously its not something thats always
needed, but it seems like it would be a nice feature to have on occasion. I've
written the below patch which allows individual entropy stores to be flagged as
desiring a continuous test to be run on them as is extracted.  By default this
option is off, but is enabled in the event that fips mode is selected during
bootup.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

kernel_fpu_begin/end used preempt_disable/enable, so sleep should be
prevented between kernel_fpu_begin/end.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Because AES-NI instructions will touch XMM state, corresponding code
must be enclosed within kernel_fpu_begin/end, which used
preempt_disable/enable. So sleep should be prevented between
kernel_fpu_begin/end.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Original implementation of aesni_cbc_dec do not save IV if input
length % 4 == 0. This will make decryption of next block failed.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Extend previous workarounds for the prefetch bug to cover CBC mode,
clean up the code a bit.
Signed-off-by: NChuck Ebbert <cebbert@redhat.com>
Acked-by: NHarald Welte <HaraldWelte@viatech.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The VIA Nano processor has a bug that makes it prefetch extra data
during encryption operations, causing spurious page faults. Extend
existing workarounds for ECB mode to copy the data to an temporary
buffer to avoid the problem.
Signed-off-by: NChuck Ebbert <cebbert@redhat.com>
Acked-by: NHarald Welte <HaraldWelte@viatech.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ia64 was assigning resources to root busses after allocations had
been made for child busses.  Calling pcibios_setup_root_windows() from
pcibios_fixup_bus() solves this problem by assigning the resources to
the root bus before child busses are scanned.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Tested-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This function was only used by pci_claim_resource(), and the last commit
deleted that use.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Instead of starting from the iomem or ioport roots, start from the
parent bus' resources.  This fixes a bug where child resources would
appear above their parents resources if they had the same size.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Tested-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Convert ia64 to use int-ll64.h
  [IA64] Fix build error in paravirt_patchlist.c
  [IA64] ia64 does not need umount2() syscall
  [IA64] hook up new rt_tgsigqueueinfo syscall
  [IA64] msi_ia64.c dmar_msi_type should be static
  [IA64] remove obsolete hw_interrupt_type
  [IA64] remove obsolete irq_desc_t typedef
  [IA64] remove obsolete no_irq_type
  [IA64] unexport fpswa.h

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: early init for MFD running regulators
  mfd: fix tmio related warnings
  mfd: asic3: enable SD/SDIO cell
  mfd: asic3: enable DS1WM cell
  mfd: asic3: remove SD/SDIO controller register definitions
  mfd: asic3: use resource_size macro instead of local variable
  mfd: add ASIC3 IRQ numbers
  mfd: asic3: add clock handling for MFD cells
  mfd: asic3: add asic3_set_register common operation
  mfd: Fix Kconfig help text for WM8350
  mfd: add PCAP driver
  mfd: add U300 AB3100 core support
  drivers/mfd: remove obsolete irq_desc_t typedef
  mfd/pcf50633-gpio.c: add MODULE_LICENSE
  mfd: Mark WM8350 mask revision as readable to match silicon
  mfd: Mark clocks_init as non-init in twl4030-core.c
  mfd: Correct readability of WM8350 register 227

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Fix some typos in comments
  kmemleak: Rename kmemleak_panic to kmemleak_stop
  kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations

For MFDs running regulator cores, we really want them to be brought up early
during boot.
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NMike Rapoport <mike@compulab.co.il>

We can not have .driver_data as const since platform_set_drvdata() doesnt take
a const.
The hclk mmc_data field can be const though.
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This enables the ASIC3's SD/SDIO MFD cell, supported by the tmio_mmc driver.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This enables the ASIC3's DS1WM MFD cell, supported by the ds1wm driver.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Only the base addresses remain, as they are needed to set up
the IOMEM resources.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This should make the code a little bit easier to read.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

IRQ number definitions for PWM, LED, SPI and OWM (ds1wm).
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Since ASIC3 has to work on both PXA and S3C and since their
struct clk implementations differ, we can't register out
clocks with the clkdev mechanism (yet?).
For now we have to keep clock handling internal to this
driver and enable/disable the clocks via the
mfd_cell->enable/disable functions.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Used to configure single bits of the SDHWCTRL_SDCONF and EXTCF_RESET/SELECT
registers needed for DS1WM, MMC/SDIO and PCMCIA functionality.
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

More with the grammar.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The PCAP Asic as present on EZX phones is a multi function device with
voltage regulators, ADC, touch screen controller, RTC, USB transceiver,
leds controller, and audio codec.

It has two SPI ports, typically one is connected to the application
processor and another to the baseband, this driver provides read/write
functions to its registers, irq demultiplexer and ADC
queueing/abstraction.

This chip is used on a lot of Motorola phones, it was manufactured by TI
as a custom product with the name PTWL93017, later this design evolved
into the ATLAS PMIC from Freescale (MC13783).
Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This adds a core driver for the AB3100 mixed-signal circuit
found in the ST-Ericsson U300 series platforms. This driver
is a singleton proxy for all accesses to the AB3100
sub-drivers which will be merged on top of this one, RTC,
regulators, battery and system power control, vibrator,
LEDs, and an ALSA codec.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Reviewed-by: NMike Rapoport <mike@compulab.co.il>
Reviewed-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have
been kept around for migration reasons.  After more than two years it's
time to remove them finally.

This patch cleans up one of the remaining users.  When all such patches
hit mainline we can remove the defines and typedefs finally.

Impact: cleanup

Convert the last remaining users and remove the typedef.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add the missing MODULE_LICENSE("GPL").
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

No impact unless someone has written additional kernel code.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>