- 06 11月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 10月, 2006 1 次提交
-
-
由 Russell King 提交于
The Zaurii drivers were partially fixed up for the IRQ register changes, but unfortunately missed some bits, resulting in build errors. Fix these. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 11 10月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Many users seems to be annoyed by this warning so kill the message and implement a counter exported as a sysfs attribute so we still know what is going on. Make atkbd use attribute groups while we are at it. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 10月, 2006 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Enable HIL configuration options on HP300 Signed-off-by: NKars de Jong <jongk@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 10月, 2006 1 次提交
-
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 04 10月, 2006 1 次提交
-
-
由 Matt LaPlante 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 30 9月, 2006 1 次提交
-
-
由 Komal Shah 提交于
This patch adds support for keypad driver running on different TI OMAP(http://www.ti.com/omap) processor based boards like OSK, H2, H3, H4, Persuas and Nokia 770. Signed-off-by: NKomal Shah <komal_shah802003@yahoo.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 19 9月, 2006 1 次提交
-
-
由 Marek Vasut 提交于
Add support for stowaway and stowaway compatible (eg. dicota inutPDA) serial keyboards. Reported to work on palm zire71 and palm tungsten T3. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 14 9月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Microsoft Natural Elite Pro keyboard produces unisual response to the GET ID command - single byte 0xaa (normally keyboards produce 2-byte response). Fail GET ID command so atkbd gets a change to do alternate probe. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 23 8月, 2006 1 次提交
-
-
由 Florin Malita 提交于
This was introduced in commit 3d0f0fa0: bounds checking is performed against period[32] while indexing delay[4]. Spotted by Coverity, CID 1376. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 05 8月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Make the AT keyboard driver restore previously set repeat rate when resuming. Noticed by Linus Torvalds. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 03 7月, 2006 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 28 6月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 26 6月, 2006 3 次提交
-
-
由 Dmitry Torokhov 提交于
Make atkbd report HANGEUL/HANJA keys by default and use correct scan codes for these keys (they were swapped). Also make sure their scancodes reported as EV_MSC/MSC_SCAN events. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jerome Pinot 提交于
Fix a mispelling of the korean alphabet name in the input subsystem. See http://en.wikipedia.org/wiki/Hangeul#Names for more details. KEY_HANGUEL left to not break people Signed-off-by: NJerome Pinot <ngc891@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Change all sprintfs into snprintfs to make sure we won't stomp on data adjacent to our buffers. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 23 6月, 2006 1 次提交
-
-
由 Roman Zippel 提交于
Dump the extra mapping in the amikbd interrupt handler, so old Amiga keymaps work again. Amigas need a special keymap anyway, standard keymaps are not usable and recreating all keymaps is simply not worth the trouble. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 5月, 2006 1 次提交
-
-
由 Richard Purdie 提交于
Remove the numbered SW_* entries from the input system and assign names to the existing users. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 26 4月, 2006 1 次提交
-
-
由 Richard Purdie 提交于
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 22 4月, 2006 1 次提交
-
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 31 3月, 2006 2 次提交
-
-
由 Kyle McMartin 提交于
On Thu, Mar 30, 2006 at 08:31:02AM -0500, Dmitry Torokhov wrote: > Don't do that, its double free. input_unregister_device() normally > causes release() to be called and free the device. input_free_device > is only to be called when input_register_device has not been called or > failed. > > Plus you might want to unregister device after closing serio port, > otherwise your interrupt routine might be referencing already freed > memory. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Convert HIL drivers to use input_allocate_device() - avoids crashes. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 14 3月, 2006 5 次提交
-
-
由 Richard Purdie 提交于
* Change the scan interval from 100ms to 50ms. This stops the key repeat from triggering on double letter presses. * Remove unneeded stale hinge code from corgikbd * Change unneeded corgi GPIO pins to inputs when suspended * Add support for the headphone jack switch for both corgi and spitz (as switch SW_2) Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Allow disabling atkbd driver if CONFIG_EMBEDDED is enabled. Previously it was impossible to disable atkbd on X86_PC. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Do not activate softrepeat by default on dumb keyboards as it clashes with their own hardware repeat (for example Dell DRAC3). Softrepeat can still be activated manually via module parameter or sysfs. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Fix bat_xl and err_xl logic causing atkbd to complain about 'unknown key 0x7f'. Noted by Ben LaHaise. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Sesterhenn 提交于
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 19 2月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 2月, 2006 1 次提交
-
-
由 Arthur Othieno 提交于
98kbd{,-io} and 98spkr all went out with PC98 subarch. Remove stale Makefile entries that remained. Signed-off-by: NArthur Othieno <apgo@patchbomb.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 1月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
These haven't worked in some time, and we've dropped support for the bus from the SH tree until someone shows some interest in maintaining it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 09 1月, 2006 1 次提交
-
-
由 Russell King 提交于
Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 1月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Call serio_reconnect() instead of serio_rescan() when detecting that a new keyboard was plugged in. This should help KVM uses losing custom keymap settings when switching between boxes. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 20 11月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
Changing led state is pretty slow operation; when there are multiple requests coming at a high rate they may interfere with normal typing. Try optimize (skip) changing hardware state when multiple requests are coming back-to-back. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 11月, 2005 1 次提交
-
-
由 Russell King 提交于
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 11月, 2005 3 次提交
-
-
由 Jan-Benedict Glaw 提交于
* Hide debugging code into #ifdef, which allows to simplify the large switch statement * Update macros to not reference variables not given as arguments Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Pavel Machek 提交于
Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 01 11月, 2005 1 次提交
-
-
由 Arthur Othieno 提交于
CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with the subarch split. Remove it, and fixup the remaining users to depend on CONFIG_X86_PC instead. Signed-off-by: NArthur Othieno <a.othieno@bluewin.ch> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-