- 13 5月, 2008 2 次提交
-
-
由 Marcin Slusarz 提交于
all other codepaths in this function return negative values on errors Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
When CIFSFindNext gets back an -EBADF from a call, it sets the return code of the function to 0 and eventually exits. Doing this makes the cleanup at the end of the function skip freeing the SMB buffer, so we need to make sure we free the buffer explicitly when doing this. If we don't you end up with errors like this when unplugging the cifs kernel module: slab error in kmem_cache_destroy(): cache `cifs_request': Can't free all objects [<c046bdbf>] kmem_cache_destroy+0x61/0xf3 [<e0f03045>] cifs_destroy_request_bufs+0x14/0x28 [cifs] [<e0f2016e>] exit_cifs+0x1e/0x80 [cifs] [<c043aeae>] sys_delete_module+0x192/0x1b8 [<c04451fd>] audit_syscall_entry+0x14b/0x17d [<c0405413>] syscall_call+0x7/0xb ======================= Signed-off-by: NJeff Layton <jlayton@redhat.com>
-
- 12 5月, 2008 1 次提交
-
-
由 Jeff Layton 提交于
When creating a directory on a CIFS share without POSIX extensions, and the given mode has no write bits set, set the ATTR_READONLY bit. When creating a file, set ATTR_READONLY if the create mode has no write bits set and we're not using unix extensions. There are some comments about this being problematic due to the VFS splitting creates into 2 parts. I'm not sure what that's actually talking about, but I'm assuming that it has something to do with how mknod is implemented. In the simple case where we have no unix extensions and we're just creating a regular file, there's no reason we can't set ATTR_READONLY. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 29 4月, 2008 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 10 4月, 2008 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NShirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 13 2月, 2008 1 次提交
-
-
由 Steve French 提交于
Christoph had noticed too many ifdefs in the CIFS code making it hard to read. This patch removes about a quarter of them from the C files in cifs by improving a few key ifdefs in the .h files. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 08 2月, 2008 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 31 12月, 2007 2 次提交
-
-
由 Steve French 提交于
Requires cifsacl mount flag to be on and CIFS_EXPERIMENTAL enabled CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
Thanks to Oleg Gvozdev for noticing the problem. CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 14 11月, 2007 1 次提交
-
-
由 Steve French 提交于
request In SendReceive() function in transport.c - it memcpy's message payload into a buffer passed via out_buf param. The function assumes that all buffers are of size (CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) , unfortunately it is also called with smaller (MAX_CIFS_SMALL_BUFFER_SIZE) buffers. There are eight callers (SMB worker functions) which are primarily affected by this change: TreeDisconnect, uLogoff, Close, findClose, SetFileSize, SetFileTimes, Lock and PosixLock CC: Dave Kleikamp <shaggy@austin.ibm.com> CC: Przemyslaw Wegrzyn <czajnik@czajsoft.pl> Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 03 11月, 2007 1 次提交
-
-
由 Jeff Layton 提交于
Also, fix the parser to recognize them and set the secType accordingly. Make CIFSSMBNegotiate not error out automatically after parsing the securityBlob. Also thanks to Q (Igor) and Simo for their help on this set of kerberos patches (and Dave Howells for help on the upcall). Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 27 10月, 2007 1 次提交
-
-
由 Steve French 提交于
Now GetACL in getinodeinfo path when cifsacl mount option used, and ACL is parsed for SIDs. Missing only one piece now to be able to retrieve the mode Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 26 10月, 2007 1 次提交
-
-
由 Steve French 提交于
Acked-by: NShirish Pargaonkar <shirishp@us.ibm.com> CC: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 24 10月, 2007 1 次提交
-
-
由 Parag Warudkar 提交于
get rid of couple of unused function warnings which show up when CONFIG_CIFS_EXPERIMENTAL is not defined - wrap them in #ifdef CONFIG_CIFS_EXPERIMENTAL. Patch against current git. Signed-off-by: NParag Warudkar <kernel-stuff@comcast.net> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 19 10月, 2007 1 次提交
-
-
由 Steve French 提交于
Also returns more accurate errors to mount for the cases of account expired and password expired Acked-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 18 10月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 17 10月, 2007 3 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
SPNEGO NegProt response also contains a server_GUID. Parse it as we would for RawNTLMSSP. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Jeff Layton 提交于
[CIFS] fix error message about packet signing When packet signing is disabled and the server requires it, cifs prints an error message. The current message refers to a file in /proc that no longer exists. Fix it to refer to the correct file. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 15 10月, 2007 1 次提交
-
-
由 Cyril Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 12 10月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NShirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 05 10月, 2007 1 次提交
-
-
由 Steve French 提交于
Fixes two problems: 1) we dropped down to negotiating lanman if we did not recognize the mechanism (krb5 e.g.) 2) we did not stop cifsd (thus will fail when doing rmod cifs with slab free errors) when we fail tcon but have a bad session (which is the case in which signing is required but we don't allow signing on the client) It also turns on extended security flag in the header when passing "sec=krb5" on mount command (although kerberos support is not done of course) Acked-by: NJeff Layton <jlayton@redhat.com> CC: Shaggy <shaggy@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 04 10月, 2007 1 次提交
-
-
由 Shirish Pargaonkar 提交于
Signed-off-by: NShirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 28 9月, 2007 1 次提交
-
-
由 Steve French 提交于
We were allocating request buffers twice in the statfs path when mounted to very old (Windows 9x) servers. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 26 9月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 25 9月, 2007 1 次提交
-
-
由 Steve French 提交于
Add code to be able to dump CIFS ACL information when Query Posix ACL with cifsacl mount parm enabled. Signed-off-by: NShirish Pargoankar <shirishp@us.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 20 9月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 31 8月, 2007 2 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Andre Haupt 提交于
Signed-off-by: NAndrew Haupt <andre@finow14.de> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 19 7月, 2007 1 次提交
-
-
由 Steve French 提交于
Previously the only way to do this was to umount all mounts to that server, turn off a proc setting (/proc/fs/cifs/LinuxExtensionsEnabled). Fixes Samba bugzilla bug number: 4582 (and also 2008) Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 18 7月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 15 7月, 2007 1 次提交
-
-
由 Steve French 提交于
In the cleanup phase of the dbench test, we were noticing sharing violation followed by failed directory removals when dbench did not close the test files before the cleanup phase started. Using the new POSIX unlink, which Samba has supported for a few months, avoids this. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 13 7月, 2007 1 次提交
-
-
由 Steve French 提交于
This should be the last big batch of whitespace/formatting fixes. checkpatch warnings for the cifs directory are down about 90% and many of the remaining ones are harder to remove or make the code harder to read. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 08 7月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 07 7月, 2007 1 次提交
-
-
由 Jeff 提交于
Currently, if mount with a signing-enabled sec= option (e.g. sec=ntlmi), the kernel does a warning printk if the server doesn't support signing, and then proceeds without signatures. This is probably OK for people that think to look at the ring buffer, but seems wrong to me. If someone explicitly requests signing, we should error out if that request can't be satisfied. They can then reattempt the mount without signing if that's ok. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 29 6月, 2007 1 次提交
-
-
由 Steve French 提交于
We were checking the wrong (old) global variable to determine whether to override server and force signing on the SMB connection. Acked-by: NDave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 06 6月, 2007 1 次提交
-
-
由 Yehuda Sadeh Weinraub 提交于
A related signature issue that I came across. There's a bug in win2k that when NT error codes are not negotiated, the server doesn't response that signatures are mandatory. Since there's (currently) no way turn on signatures in such case, I had to force NT error codes, so that this bug will not occur Signed-off-by: NYehuda Sadeh Weinraub <Yehuda.Sadeh@expand.com> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 25 4月, 2007 1 次提交
-
-
由 Steve French 提交于
Fix incorrect parsing of return data Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 24 4月, 2007 1 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 01 3月, 2007 1 次提交
-
-
由 Steve French 提交于
In fixing a bug Samba 3.0.26pre allowed some clients (including Linux cifs client) to change file size to zero in SET_FILE_UNIX_BASIC (which Linux cifs client uses for chmod). The server has been "fixed" now but that also fixes the client to net send file size zero on chmod. Fixes Samba bugzilla bug # 4418. Fixed with help from Jeremy Allison Signed-off-by: NJeremy Allison <jra@samba.org> Signed-off-by: NSteve French <sfrench@us.ibm.com>
-