Checking for GT faults is not specific in any way to S4 thaw, so do it
also during S3 resume, S4 restore and driver load time. This allows us to
unify the Sx handlers in an upcoming patch.

v2:
- move the check to intel_uncore_early_sanitize(), so we check at driver
  load time too (Chris)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The logic to skip restoring GTT mappings was added to speed up
suspend/resume, but not on old GENs where not restoring them caused
problems. The check for old GENs is based on the existence of OpRegion,
but this doesn't work since opregion is initialized only after
the check. So we end up always restoring the mappings.

On my BYT - which has OpRegion - skipping restoring the mappings during
suspend doesn't work, I get a GPU hang after resume. Also the logic of
when to allow the optimization during S4 is reversed: we should allow it
during S4 thaw but not during S4 restore, but atm we have it the other
way around in the code.

Since correctness wins over optimal code and since the optimization
wasn't used anyway I decided not to try to fix it at this point, but
just remove it. This allows us to unify the S3 and S4 handlers in the
following patches.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the device is suspended already through the switcheroo interface we
shouldn't suspend it again or resume it after suspend. We have the
corresponding check for S3 suspend already, add it for all the other
S3 and S4 handlers. Also move the check from i915_resume_early() to
i915_resume_legacy(), so that it's done in the high level handler for
all PM events.

v2:
- fix the resume path too, we don't need to special case there
  DRM_SWITCH_POWER_OFF with the device being enabled (in which case we'd
  have to disable the device), since that never happens (Ville)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During switcheroo/legacy suspend we don't call the suspend_late handler
but when resuming afterwards we call resume_early. This happened to work
so far, since suspend_late only disabled the PCI device. This changed in

commit 016970be
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date:   Wed Aug 13 23:07:06 2014 +0530

    drm/i915: Sharing platform specific sequence between runtime and system susp

after which we also saved/restored the VLV Gunit HW state in
suspend_late/resume_early. So now since we don't save the state during
suspend a following resume will restore a corrupted state.

Fix this by calling the suspend_late handler during both switcheroo and
legacy suspend.

CC: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NSagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915_suspend() is called from the DRM legacy S3 suspend/S4 freeze paths
and the switcheroo suspend path. For switcheroo we only ever need to
perform a full suspend (PM_EVENT_SUSPEND) and for the DRM legacy path
we can handle the S4 freeze (PM_EVENT_FREEZE) the same way as S3
suspend. The only difference atm between suspend and freeze is that
during freeze we don't disable the PCI device, but there is no reason
why we can't do so. So unify the two cases to reduce complexity.

Note that for the DRM legacy case the thaw event is not handled, so
we disable the display before creating the hibernation image and it
won't get re-enabled until reboot. We could fix this leaving the
display enabled for the image creation/writing (if we care enough
about UMS), but this can be done as a follow-up.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is needed by an upcoming patch fixing the switcheroo/legacy suspend
paths.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During S4 freeze we don't call intel_suspend_complete(), which would
save the gunit HW state, but during S4 thaw/restore events we call
intel_resume_prepare() which restores it, thus ending up in a corrupted
HW state.

Fix this by calling intel_suspend_complete() from the corresponding
freeze_late event handler.

The issue was introduced in
commit 016970be
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date:   Wed Aug 13 23:07:06 2014 +0530

CC: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The legacy DRM suspend logic (effective in UMS) doesn't handle any S4 thaw
events so we don't need to care about it either. Only S3 suspend and S4
freeze events are handled. Leave an assert behind to be sure.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

IS_ULT() wasn't taking into account SKL so we had a warn with SPT-LP.

We don't realy need those checks here, and as we don't need to introduce
IS_SKL_ULT/ULX() at the moment, let's just drop them.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No need to add the BDW pci ULT/ULX checks inside a if (IS_HASWELL(dev))
code path.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's the new world order!

Not going full monty on these here and rolling this out throughout the
subsequent call chains since this is just for the kerneldoc. Later on
we can go more crazy, especially once we've embedded drm_device
correctly.

v2: Also frob the runtime_pm functions ...
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This seems to have been accidentally lost in

commit be62acb4
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Fri Aug 30 16:19:28 2013 +0300

    drm/i915: ban badly behaving contexts

Without this real gpu hangs only log output at info level, which gets
filtered away by piglit's testrunner.

v2: Tune down to notice level. Note that we need to add drm/i915 so
that at least the automatic igt dmesg filtering still picks it up.

v3: git add and lack of coffee don't mix well.

v4: Message is in between hw and sw reset, so switch verb to
continuous form.

v5: Use i915_stop_rings_allow_warn for consistency. For Chris' case of
injecting lots of hangs I guess we need to revamp this all anyway when
merging. For now this should plug the regression for piglit testing
mesa.

v6: Make it compile (Mika).

Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reported-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Another layer of indirection for just an lpt-only w/a is a bit
excessive. Reduce it.

This was added in

commit 7d708ee4
Author: Imre Deak <imre.deak@intel.com>
Date:   Wed Apr 17 14:04:50 2013 +0300

    drm/i915: HSW: allow PCH clock gating for suspend

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch implements detection of SPT and SPT-LP PCH devices.

v2: Added HAS_PCH_SPT macro
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Enable FBC feature on Skylake

Issue: VIZ-3788
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NDaisy Sun <daisy.sun@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Adding new macro IS_SKYLAKE for skylake specific implementation.
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NSatheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Squash in 2nd patch from Damien for more ids (Daniel)
v3: info->has*ring -> info->ring_mask conversion. Also add VEBOX support.
v4: Fold in update from Damien
v5: Rebase and add GEN_DEFAULT_PIPEOFFSETS
v6: Add more PCI ID (Vandana)
v7: Rebase and add IVB_CURSOR_OFFSETS
v8: Renamed the macro from _PCI_IDS to _IDS for consistency
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Grab bag for all the special cases:
- i9xx_check_fifo_underruns is only called from crtc_enable hooks,
  i.e. process context.
- i915_enable_asle_pipestat is only called from interrupt postinstall
  hooks. So again process context.
- gen8_irq_power_well_post_enable is called from the runtime pm code,
  which again means process context.
- The open-coded hpd_irq_setup loop in _thaw is also running in process
  context.

So for all of them the plain _irq variant is sufficient.
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was lost in

commit e11aa362
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Wed Jun 18 09:52:55 2014 -0700

    drm/i915: use runtime irq suspend/resume in freeze/thaw

which makes the second part of this commen a bit nonsense. Both were
originally added in

commit 15239099
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Mar 5 09:50:58 2013 +0100

    drm/i915: enable irqs earlier when resuming

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow I've overlooked this when simplifying the irq reinit
scheme on gen4.5+ in

commit 78ad455f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu May 22 22:18:21 2014 +0200

    drm/i915: Improve irq handling after gpu resets

Since display interrups in general survive a gpu reset on those
platforms there's also no need to reinit the hotplug settings.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

One step closer to dropping all the drm_bus_* code:
Add a driver->set_busid() callback and make all drivers use the generic
helpers. Nouveau is the only driver that uses two different bus-types with
the same drm_driver. This is totally broken if both buses are available on
the same machine (unlikely, but lets be safe). Therefore, we create two
different drivers for each platform during module_init() and set the
set_busid() callback respectively.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of going through hoops, just put the driver author directly as
DRM_AUTHOR() argument. This will also make it consistent when we add
Intel to the list.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On BDW we're seeing a problem that after we runtime resume, the
outputs connected to DDI C are not detected: they don't appear in the
SDEISR register and GMBUS transactions don't work. They stop working
at the moment we call intel_opregion_notify_adapter() during runtime
suspend, but they don't go back to work when we call the same function
during runtime resume. They only work after we do a modeset and call
intel_opregion_notify_encoder(), but this point is already too late.

While debugging, I tried to pass PCI_D3hot which is the value that
matches the spec, and it seems to have solved the problem. I couldn't
find any explanation of why this solves the problem, but there's also
no documented explanation - besides our code and git log - of why
Haswell should use PCI_D1, so keep this for now in order to keep BDW
runtime PM working.

Also add a comment to point the fact that there's no spec documenting
all the weirdness involved here.

Cc: kristen.c.accardi@intel.com
Testcase: igt/pm_rpm/drm-resources-equal
Testcase: igt/pm_rpm/i2c
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch is to address Daniels concerns over different code during reset:

http://lists.freedesktop.org/archives/intel-gfx/2014-June/047758.html

"The reason for aiming as hard as possible to use the exact same code for
driver load, gpu reset and runtime pm/system resume is that we've simply
seen too many bugs due to slight variations and unintended omissions."

Tested using igt drv_hangman.

V2: Cleaner way of preventing check_wedge returning -EAGAIN
V3: Clean the last_context during reset, to ensure do_switch() does the MI_SET_CONTEXT. As per review.
Signed-off-by: NMcAulay, Alistair <alistair.mcaulay@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: Rebase over ctx->ppgtt rework and extend the comment in
check_wedge a bit.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Before sharing common parts between the system and runtime s/r
handlers we WARNed if the runtime s/r handlers were called on GENs that
didn't support RPM. But this WARN is not correct if the same handler is
called from the system s/r path, since that can happen on any platform.
This also broke system s/r on old platforms.

The issue was introduced in

commit 016970be
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date:   Wed Aug 13 23:07:06 2014 +0530

v2:
- remove the WARN and depend on the HAS_RUNTIME_PM check in
  rutime_suspend/resume instead (Daniel)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82751Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Up until recently, semaphores weren't enabled in BDW so we didn't care
about them. But then Rodrigo came and enabled them:

   commit 521e62e4
   Author: Rodrigo Vivi <rodrigo.vivi@intel.com>

      drm/i915: Enable semaphores on BDW

So now we have to explicitly disable them for Execlists until both
features play nicely.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm we may leave eDP VDD enabled during system suspend after the CRTCs
are disabled through an HPD->DPCD read event. So disable VDD during
suspend at a point when no HPDs can occur.

Note that runtime suspend doesn't have the same problem, since there the
RPM ref held by VDD provides already the needed serialization.

v2:
- add note to commit message about the runtime suspend path (Ville)
- use edp_panel_vdd_off_sync(), so we can keep the WARN in
  edp_panel_vdd_off() (Ville)
v3:
- rebased on -fixes (for_each_intel_encoder()->list_for_each_entry())
  (Imre)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Cc: stable@vger.kernel.org (3.16+)
[Jani: fix sparse warning reported by Fengguang Wu]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Make sure these work handlers don't run after we system suspend or
unload the driver. Note that we don't cancel the handlers during runtime
suspend. That could lead to a lockup, since we take a runtime PM ref
from the handlers themselves. Fortunaltely canceling there is not needed
since the RPM ref itself provides for the needed serialization.

v2:
- fix the order of canceling dig_port_work wrt. hotplug_work (Ville)
- zero out {long,short}_hpd_port_mask and hpd_event_bits for speed
  (Ville)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org (3.16+)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

On VLV, post S0i3 during i915_drm_thaw following issue is observed during ring
initialization.

[ 335.604039] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 336.607340] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 336.607345] [drm:init_ring_common] ERROR failed to set render ring head to zero ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 337.610645] [drm:stop_ring] ERROR bsd ring :timed out trying to stop ring
[ 338.613952] [drm:stop_ring] ERROR bsd ring :timed out trying to stop ring
[ 338.613956] [drm:init_ring_common] ERROR failed to set bsd ring head to zero ctl 00000000 head 00000000 tail 00000000 start 00000000
[ 339.617256] [drm:stop_ring] ERROR render ring :timed out trying to stop ring
[ 339.617258] -----------[ cut here ]-----------
[ 339.617267] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_ringbuffer.c:1666 intel_cleanup_ring+0xe6/0xf0()
[ 339.617396] --[ end trace 5ef5ed1a3c92e2a6 ]--
[ 339.617428] [drm:__i915_drm_thaw] ERROR failed to re-initialize GPU, declaring wedged!

This is happening since wake is not enabled and Gunit registers are not restored.
For this system suspend/resume paths need to follow save/restore and additional
platform specific setup in suspend_complete and resume_prepare.

suspend_complete is shared unconditionaly for VLV, HSW, BDW. resume_prepare for
HSW and BDW has pc8 disabling which is needed during thaw_early so sharing
uncondtionally. For VLV and SNB runtime resume specific sequence exists.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Goel, Akash <akash.goel@intel.com>
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With this change, intel_runtime_suspend and intel_runtime_resume functions
become completely platform agnostic. Platform specific suspend/resume
changes are moved to intel_suspend_complete and intel_resume_prepare.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Goel, Akash <akash.goel@intel.com>
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rather than take and release the console_lock() around a non-existent
DRM_I915_FBDEV, move the lock acquisation into the callee where it will
be compiled out by the config option entirely. This includes moving the
deferred fb_set_suspend() dance and encapsulating it entirely within
intel_fbdev.c.

v2: Use an integral work item so that we can explicitly flush the work
upon suspend/unload.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Add the flush_work in fbdev_fini per the mailing list
discussion. And s/BUG_ON/WARN_ON/ because.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 521e62e4.

Although POST_SYNC brought a bit of stability to Semaphores on BDW
it didn't solved all issues and some hungs can still occour when
semaphores are enabled on BDW. Also some sloweness can be found on some
igt tests, althoguth it apparently doesn't affect real workloads.

Besides that, no real performance gain was found on our tests with different
and even multiple workloads.

Let's disable it again for now. At least until we are sure it is safe
to re-enable it.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When I moved the irq disable down to after display disable,
I didn't realise the gt suspend also required irqs off, so move it
down as well.

Fixes WARNs seen at suspend/resume time.

v2: moved the rps flush down as well.
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

By the time I wrote this patch, it allowed me to catch some problems.
But due to patch reordering - in order to prevent fake "regression"
reports - this patch may be merged after the fixes of the problems
identified by this patch.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On VLV, after i915_pm_suspend display power wells are staying
power ungated. So, after initiating mem sleep "echo mem > /sys/power/state"
Display is staing D0 State. There might be better way/place to power gate
these wells. Also, we need to make sure that if wells are power gated due to
DPMS OFF sequence, they need not be turned off by i915_pm_suspend again.

v2: Extracted helper for intel_crtc_disable and power gating CRTC power wells.
[Daniel]

Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Change-Id: I34c80da66aa24c423a5576c68aa1f3a8d0f43848
Signed-off-by: NBorun Fu <borun.fu@intel.com>
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds DP 1.2 MST support on Haswell systems.

Notes:
a) this reworks irq handling for DP MST ports, so that we can
avoid the mode config locking in the current hpd handlers, as
we need to process up/down msgs at a better time.

Changes since v0.1:
use PORT_PCH_HOTPLUG to detect short vs long pulses
add a workqueue to deal with digital events as they can get blocked on the
main workqueue beyong mode_config mutex
fix a bunch of modeset checker warnings
acks irqs in the driver
cleanup the MST encoders

Changes since v0.2:
check irq status again in work handler
move around bring up and tear down to fix DPMS on/off
use path properties.

Changes since v0.3:
updates for mst apis
more state checker fixes
irq handling improvements
fbcon handling support
improved reference counting of link - fixes redocking.

Changes since v0.4:
handle gpu reset hpd reinit without oopsing
check link status on HPD irqs
fix suspend/resume

Changes since v0.5:
use proper functions to get max link/lane counts
fix another checker backtrace - due to connectors disappearing.
set output type in more places fro, unknown->displayport
don't talk to devices if no HPD asserted
check mst on short irqs only
check link status properly
rebase onto prepping irq changes.
drop unsued force_act

Changes since v0.6:
cleanup unused struct entry.

[airlied: fix some sparse warnings].
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

To achieve further power savings during system freeze (aka connected
standby, or s0ix) we have to send a PCI_D1 opregion notification. As
the information about the state we're entering (system freeze,
suspend to ram or suspend to disk) is only available through the ACPI
subsystem, make this support depend on the relevant kconfig option.
Things will still work if this option isn't set, albeit with less than
optimial power saving.

This also fixes a compile breakage when the option is not set introduced
in

commit e5747e3a
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jun 12 08:35:47 2014 -0700

    drm/i915: send proper opregion notifications on suspend/resume
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some drivers need to be able to have a perfect race-free fbcon setup.
Current drivers only enable hotplug processing after the call to
drm_fb_helper_initial_config which leaves a tiny but important race.

This race is especially noticable on embedded platforms where the
driver itself enables the voltage for the hdmi output, since only then
will monitors (after a bit of delay, as usual) respond by asserting
the hpd pin.

Most of the infrastructure is already there with the split-out
drm_fb_helper_init. And drm_fb_helper_initial_config already has all
the required locking to handle concurrent hpd events since

commit 53f1904b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Mar 20 14:26:35 2014 +0100

    drm/fb-helper: improve drm_fb_helper_initial_config locking

The only missing bit is making drm_fb_helper_hotplug_event save
against concurrent calls of drm_fb_helper_initial_config. The only
unprotected bit is the check for fb_helper->fb.

With that drivers can first initialize the fb helper, then enabel
hotplug processing and then set up the initial config all in a
completely race-free manner. Update kerneldoc and convert i915 as a
proof of concept.

Feature requested by Thierry since his tegra driver atm reliably boots
slowly enough to misses the hotplug event for an external hdmi screen,
but also reliably boots to quickly for the hpd pin to be asserted when
the fb helper calls into the hdmi ->detect function.

Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>