When IPV6=m and TIPC=y, below error will appear during building kernel
image:

net/tipc/udp_media.c:196:
undefined reference to `ip6_dst_lookup'
make: *** [vmlinux] Error 1

As ip6_dst_lookup() is implemented in IPV6 and IPV6 is compiled as
module, ip6_dst_lookup() is not built-in core kernel image. As a
result, compiler cannot find 'ip6_dst_lookup' reference while
compiling TIPC code into core kernel image.

But with the method introduced by commit 5f81bd2e ("ipv6: export a
stub for IPv6 symbols used by vxlan"), we can avoid the compile error
through "ipv6_stub" pointer to access ip6_dst_lookup().

Fixes: d0f91938 ("tipc: add ip/udp media type")
Suggested-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With dev group, we can change a batch of net devices,
so we should allow to delete them together too.

Group 0 is not allowed to be deleted since it is
the default group.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a comment on the choice of the value 16 as the
maximum chain length before we force a rehash.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/usb/cx82310_eth.c:175:2-3: Unneeded semicolon

 Removes unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f2f8036e ("tipc: add support for connect() on dgram/rdm sockets")
hasn't validated user input length for the sockaddr structure which allows
a user to overwrite kernel memory with arbitrary input.

Fixes: f2f8036e ("tipc: add support for connect() on dgram/rdm sockets")
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cc: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	net/netfilter/nf_tables_core.c

The nf_tables_core.c conflict was resolved using a conflict resolution
from Stephen Rothwell as a guide.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 963ecbd4 ("rhashtable:
Fix use-after-free in rhashtable_walk_stop") fixed a real bug
but created another one because we may end up sleeping inside an
RCU critical section.

This patch fixes it properly by replacing the mutex with a spin
lock that specifically protects the walker lists.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hannes Frederic Sowa says:

====================
ipv6: RFC7217 stable privacy addresses implementation

this is an implementation of basic support for RFC7217 stable privacy
addresses. Please review and consider for net-next.

v2:
* Correct references to RFC 7212 -> RFC 7217 in documentation patch (thanks, Eric!)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is specified by RFC 7217.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a DAD conflict is detected, we want to retry privacy stable address
generation up to idgen_retries (= 3) times with a delay of idgen_delay
(= 1 second). Add the logic to addrconf_dad_failure.

By design, we don't clean up dad failed permanent addresses.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to mark appropriate addresses so we can do retries in case their
DAD failed.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements the stable privacy address generation for
link-local and autoconf addresses as specified in RFC7217.

  RID = F(Prefix, Net_Iface, Network_ID, DAD_Counter, secret_key)

is the RID (random identifier). As the hash function F we chose one
round of sha1. Prefix will be either the link-local prefix or the
router advertised one. As Net_Iface we use the MAC address of the
device. DAD_Counter and secret_key are implemented as specified.

We don't use Network_ID, as it couples the code too closely to other
subsystems. It is specified as optional in the RFC.

As Net_Iface we only use the MAC address: we simply have no stable
identifier in the kernel we could possibly use: because this code might
run very early, we cannot depend on names, as they might be changed by
user space early on during the boot process.

A new address generation mode is introduced,
IN6_ADDR_GEN_MODE_STABLE_PRIVACY. With iproute2 one can switch back to
none or eui64 address configuration mode although the stable_secret is
already set.

We refuse writes to ipv6/conf/all/stable_secret but only allow
ipv6/conf/default/stable_secret and the interface specific file to be
written to. The default stable_secret is used as the parameter for the
namespace, the interface specific can overwrite the secret, e.g. when
switching a network configuration from one system to another while
inheriting the secret.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements the procfs logic for the stable_address knob:
The secret is formatted as an ipv6 address and will be stored per
interface and per namespace. We track initialized flag and return EIO
errors until the secret is set.

We don't inherit the secret to newly created namespaces.

Cc: Erik Kline <ek@google.com>
Cc: Fernando Gont <fgont@si6networks.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: YOSHIFUJI Hideaki/吉藤英明 <hideaki.yoshifuji@miraclelinux.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need this symbol later on in ipv6.ko, thus export it via EXPORT_SYMBOL
like sha_transform already is.
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bcmgenet: integrated GPHY power up/down

This patch series implements integrated Gigabit PHY power up/down, which allows
us to save close to 300mW on some designs when the Gigabit PHY is known to be
unused (e.g: during bcmgenet_close or bcmgenet_suspend not doing Wake-on-LAN).

Changes in v2:

- drop an extra bcmgenet_ext_readl in bcmgenet_phy_power_set
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case the interface is not used, power down the integrated GPHY during
suspend. Similarly to bcmgenet_open(), bcmgenet_resume() powers on the GPHY
prior to any UniMAC activity.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Power up the GPHY while we are bringing-up the network interface, and
conversely, upon bring down, power the GPHY down. In order to avoid
creating hardware hazards, make sure that the GPHY gets powered on
during bcmgenet_open() prior to the UniMAC being reset as the UniMAC may
start creating activity towards the GPHY if we reverse the steps.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement the GPHY power down sequence by setting all power down bits, putting
the GPHY in reset, and finally cutting the 25Mhz reference clock.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We were missing a number of extra steps and delays to power-up the GPHY, update
the sequence to reflect the proper procedure here.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for implementing the power down GPHY sequence, rename
bcmgenet_ephy_power_up to illustrate that it is not EPHY specific but
PHY agnostic, and add an "enable" argument.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The CK25_DIS bit controls whether a 25Mhz clock is fed to the GPHY or
not, in preparation for powering down the integrated GPHY when relevant,
make sure we clear that bit.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If bcmgenet_power_down() fails, we would want to propagate a return
value from bcmgenet_wol_power_down_cfg() to know about this.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Multiple rehashing

This series introduces multiple rehashing.

Recall that the original implementation in br_multicast used
two list pointers per hash node and therefore is limited to at
most one rehash at a time since you need one list pointer for
the old table and one for the new table.

Thanks to Josh Triplett's suggestion of using a single list pointer
we're no longer limited by that.  So it is perfectly OK to have
an arbitrary number of tables in existence at any one time.

The reader and removal simply has to walk from the oldest table
to the newest table in order not to miss anything.  Insertion
without lookup are just as easy as we simply go to the last table
that we can find and add the entry there.

However, insertion with uniqueness lookup is more complicated
because we need to ensure that two simultaneous insertions of the
same key do not both succeed.  To achieve this, all insertions
including those without lookups are required to obtain the bucket
lock from the oldest hash table that is still alive.  This is
determined by having the rehasher (there is only one rehashing
thread in the system) keep a pointer of where it is up to.  If
a bucket has already been rehashed then it is dead, i.e., there
cannot be any more insertions to it, otherwise it is considered
alive.  This guarantees that the same key cannot be inserted
in two different tables in parallel.

Patch 1 is actually a bug fix for the walker.

Patch 2-5 eliminates unnecessary out-of-line copies of jhash.

Patch 6 makes rhashtable_shrink shrink to fit.

Patch 7 introduces multiple rehashing.  This means that if we
decide to grow then we will grow regardless of whether the previous
one has finished.  However, this is still asynchronous meaning
that if insertions come fast enough we may still end up with a
table that is overutilised.

Patch 8 adds support for GFP_ATOMIC allocations of struct bucket_table.

Finally patch 9 enables immediate rehashing.  This is done either
when the table reaches 100% utilisation, or when the chain length
exceeds 16 (the latter can be disabled on request, e.g., for
nft_hash.

With these patches the system should no longer have any trouble
dealing with fast insertions on a small table.  In the worst
case you end up with a list of tables that's log N in length
while the rehasher catches up.

v3 restores rhashtable_shrink and fixes a number of bugs in the
multiple rehashing patches (7 and 9).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reintroduces immediate rehash during insertion.  If
we find during insertion that the table is full or the chain
length exceeds a set limit (currently 16 but may be disabled
with insecure_elasticity) then we will force an immediate rehash.
The rehash will contain an expansion if the table utilisation
exceeds 75%.

If this rehash fails then the insertion will fail.  Otherwise the
insertion will be reattempted in the new hash table.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the ability to allocate bucket table with GFP_ATOMIC
instead of GFP_KERNEL.  This is needed when we perform an immediate
rehash during insertion.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the missing bits to allow multiple rehashes.  The
read-side as well as remove already handle this correctly.  So it's
only the rehasher and insertion that need modification to handle
this.

Note that this patch doesn't actually enable it so for now rehashing
is still only performed by the worker thread.

This patch also disables the explicit expand/shrink interface because
the table is meant to expand and shrink automatically, and continuing
to export these interfaces unnecessarily complicates the life of the
rehasher since the rehash process is now composed of two parts.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes rhashtable_shrink to shrink to the smallest
size possible rather than halving the table.  This is needed
because with multiple rehashing we will defer shrinking until
all other rehashing is done, meaning that when we do shrink
we may be able to shrink a lot.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the explicit jhash value for the hashfn parameter
of rhashtable.  The default is now jhash so removing the setting
makes no difference apart from making one less copy of jhash in
the kernel.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the explicit jhash value for the hashfn parameter
of rhashtable.  As the key length is a multiple of 4, this means that
we will actually end up using jhash2.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since every current rhashtable user uses jhash as their hash
function, the fact that jhash is an inline function causes each
user to generate a copy of its code.

This function provides a solution to this problem by allowing
hashfn to be unset.  In which case rhashtable will automatically
set it to jhash.  Furthermore, if the key length is a multiple
of 4, we will switch over to jhash2.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When rht_key_hashfn is called from rhashtable itself and params
is equal to ht->p, there is no point in checking params.key_len
and falling back to ht->p.key_len.

For some reason gcc couldn't figure out that params is the same
as ht->p.  So let's help it by only checking params.key_len when
it's a constant.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The walker is a lockless reader so it too needs an smp_rmb before
reading the future_tbl field in order to see any new tables that
may contain elements that we should have walked over.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.1-20150323' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2015-03-23

this is a pull request of 6 patches for net-next/master.

A patch by Florian Westphal, converts the skb->destructor to use
sock_efree() instead of own destructor. Ahmed S. Darwish's patch
converts the kvaser_usb driver to use unregister_candev(). A patch by
me removes a return from a void function in the m_can driver. Yegor
Yefremov contributes a patch for combined rx/tx LED trigger support. A
sparse warning in the esd_usb2 driver was fixes by Thomas Körper. Ben
Dooks converts the at91_can driver to use endian agnostic IO accessors.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next.
Basically, more incremental updates for br_netfilter from Florian
Westphal, small nf_tables updates (including one fix for rb-tree
locking) and small two-liner to add extra validation for the REJECT6
target.

More specifically, they are:

1) Use the conntrack status flags from br_netfilter to know that DNAT is
   happening. Patch for Florian Westphal.

2) nf_bridge->physoutdev == NULL already indicates that the traffic is
   bridged, so let's get rid of the BRNF_BRIDGED flag. Also from Florian.

3) Another patch to prepare voidization of seq_printf/seq_puts/seq_putc,
   from Joe Perches.

4) Consolidation of nf_tables_newtable() error path.

5) Kill nf_bridge_pad used by br_netfilter from ip_fragment(),
   from Florian Westphal.

6) Access rb-tree root node inside the lock and remove unnecessary
   locking from the get path (we already hold nfnl_lock there), from
   Patrick McHardy.

7) You cannot use a NFT_SET_ELEM_INTERVAL_END when the set doesn't
   support interval, also from Patrick.

8) Enforce IP6T_F_PROTO from ip6t_REJECT to make sure the core is
   actually restricting matches to TCP.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce TP_STATUS_CSUM_VALID tp_status flag to tell the
af_packet user that at least the transport header checksum
has been already validated.

For now, the flag may be set for incoming packets only.
Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is just an optimization. We don't need the value of status variable
if the packet is filtered.
Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Hugne reported following error :

I'm hitting this warning on latest net-next when i try to SSH into a machine
with eth0 added to a bridge (but i think the problem is older than that)

Steps to reproduce:
node2 ~ # brctl addif br0 eth0
[  223.758785] device eth0 entered promiscuous mode
node2 ~ # ip link set br0 up
[  244.503614] br0: port 1(eth0) entered forwarding state
[  244.505108] br0: port 1(eth0) entered forwarding state
node2 ~ # [  251.160159] ------------[ cut here ]------------
[  251.160831] WARNING: CPU: 0 PID: 3 at include/net/request_sock.h:102 tcp_v4_err+0x6b1/0x720()
[  251.162077] Modules linked in:
[  251.162496] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc3+ #18
[  251.163334] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  251.164078]  ffffffff81a8365c ffff880038a6ba18 ffffffff8162ace4 0000000000009898
[  251.165084]  0000000000000000 ffff880038a6ba58 ffffffff8104da85 ffff88003fa437c0
[  251.166195]  ffff88003fa437c0 ffff88003fa74e00 ffff88003fa43bb8 ffff88003fad99a0
[  251.167203] Call Trace:
[  251.167533]  [<ffffffff8162ace4>] dump_stack+0x45/0x57
[  251.168206]  [<ffffffff8104da85>] warn_slowpath_common+0x85/0xc0
[  251.169239]  [<ffffffff8104db65>] warn_slowpath_null+0x15/0x20
[  251.170271]  [<ffffffff81559d51>] tcp_v4_err+0x6b1/0x720
[  251.171408]  [<ffffffff81630d03>] ? _raw_read_lock_irq+0x3/0x10
[  251.172589]  [<ffffffff81534e20>] ? inet_del_offload+0x40/0x40
[  251.173366]  [<ffffffff81569295>] icmp_socket_deliver+0x65/0xb0
[  251.174134]  [<ffffffff815693a2>] icmp_unreach+0xc2/0x280
[  251.174820]  [<ffffffff8156a82d>] icmp_rcv+0x2bd/0x3a0
[  251.175473]  [<ffffffff81534ea2>] ip_local_deliver_finish+0x82/0x1e0
[  251.176282]  [<ffffffff815354d8>] ip_local_deliver+0x88/0x90
[  251.177004]  [<ffffffff815350f0>] ip_rcv_finish+0xf0/0x310
[  251.177693]  [<ffffffff815357bc>] ip_rcv+0x2dc/0x390
[  251.178336]  [<ffffffff814f5da3>] __netif_receive_skb_core+0x713/0xa20
[  251.179170]  [<ffffffff814f7fca>] __netif_receive_skb+0x1a/0x80
[  251.179922]  [<ffffffff814f97d4>] process_backlog+0x94/0x120
[  251.180639]  [<ffffffff814f9612>] net_rx_action+0x1e2/0x310
[  251.181356]  [<ffffffff81051267>] __do_softirq+0xa7/0x290
[  251.182046]  [<ffffffff81051469>] run_ksoftirqd+0x19/0x30
[  251.182726]  [<ffffffff8106cc23>] smpboot_thread_fn+0x153/0x1d0
[  251.183485]  [<ffffffff8106cad0>] ? SyS_setgroups+0x130/0x130
[  251.184228]  [<ffffffff8106935e>] kthread+0xee/0x110
[  251.184871]  [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0
[  251.185690]  [<ffffffff81631108>] ret_from_fork+0x58/0x90
[  251.186385]  [<ffffffff81069270>] ? kthread_create_on_node+0x1b0/0x1b0
[  251.187216] ---[ end trace c947fc7b24e42ea1 ]---
[  259.542268] br0: port 1(eth0) entered forwarding state

Remove the double calls to reqsk_put()

[edumazet] :

I got confused because reqsk_timer_handler() _has_ to call
reqsk_put(req) after calling inet_csk_reqsk_queue_drop(), as
the timer handler holds a reference on req.
Signed-off-by: NFan Du <fan.du@intel.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NErik Hugne <erik.hugne@ericsson.com>
Fixes: fa76ce73 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>