Unlike the more usual refcnting, what css_tryget() provides is the
distinction between online and offline csses instead of protection
against upping a refcnt which already reached zero.  cgroup is
planning to provide actual tryget which fails if the refcnt already
reached zero.  Let's rename the existing trygets so that they clearly
indicate that they're onliness.

I thought about keeping the existing names as-are and introducing new
names for the planned actual tryget; however, given that each
controller participates in the synchronization of the online state, it
seems worthwhile to make it explicit that these functions are about
on/offline state.

Rename css_tryget() to css_tryget_online() and css_tryget_from_dir()
to css_tryget_online_from_dir().  This is pure rename.

v2: cgroup_freezer grew new usages of css_tryget().  Update
    accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>

Determining the css of a task usually requires RCU read lock as that's
the only thing which keeps the returned css accessible till its
reference is acquired; however, testing whether a task belongs to the
root can be performed without dereferencing the returned css by
comparing the returned pointer against the root one in init_css_set[]
which never changes.

Implement task_css_is_root() which can be invoked in any context.
This will be used by the scheduled cgroup_freezer change.

v2: cgroup no longer supports modular controllers.  No need to export
    init_css_set.  Pointed out by Li.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

percpu_ref_tryget() is different from the usual tryget semantics in
that it fails if the refcnt is in its dying stage even if the refcnt
hasn't reached zero yet.  We're about to introduce the more
conventional tryget and the current one has only one user.  Let's
rename it to percpu_ref_tryget_live() so that it explicitly signifies
the peculiarities of its semantics.

This is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NKent Overstreet <kmo@daterainc.com>

This cgroup flag has never been used.  Only CGRP_ROOT_SANE_BEHAVIOR is
used.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>

Until now, cgroup->id has been used to identify all the associated
csses and css_from_id() takes cgroup ID and returns the matching css
by looking up the cgroup and then dereferencing the css associated
with it; however, now that the lifetimes of cgroup and css are
separate, this is incorrect and breaks on the unified hierarchy when a
controller is disabled and enabled back again before the previous
instance is released.

This patch adds css->id which is a subsystem-unique ID and converts
css_from_id() to look up by the new css->id instead.  memcg is the
only user of css_from_id() and also converted to use css->id instead.

For traditional hierarchies, this shouldn't make any functional
difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, cgroup->id is allocated from 0, which is always assigned to
the root cgroup; unfortunately, memcg wants to use ID 0 to indicate
invalid IDs and ends up incrementing all IDs by one.

It's reasonable to reserve 0 for special purposes.  This patch updates
cgroup core so that ID 0 is not used and the root cgroups get ID 1.
The ID incrementing is removed form memcg.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

There's no reason to use atomic bitops for cgroup_subsys_state->flags,
cgroup_root->flags and various subsys_masks.  This patch updates those
to use bitwise and/or operations instead and converts them form
unsigned long to unsigned int.

This makes the fields occupy (marginally) smaller space and makes it
clear that they don't require atomicity.

This patch doesn't cause any behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup users often need a way to determine when a cgroup's
subhierarchy becomes empty so that it can be cleaned up.  cgroup
currently provides release_agent for it; unfortunately, this mechanism
is riddled with issues.

* It delivers events by forking and execing a userland binary
  specified as the release_agent.  This is a long deprecated method of
  notification delivery.  It's extremely heavy, slow and cumbersome to
  integrate with larger infrastructure.

* There is single monitoring point at the root.  There's no way to
  delegate management of a subtree.

* The event isn't recursive.  It triggers when a cgroup doesn't have
  any tasks or child cgroups.  Events for internal nodes trigger only
  after all children are removed.  This again makes it impossible to
  delegate management of a subtree.

* Events are filtered from the kernel side.  "notify_on_release" file
  is used to subscribe to or suppress release event.  This is
  unnecessarily complicated and probably done this way because event
  delivery itself was expensive.

This patch implements interface file "cgroup.populated" which can be
used to monitor whether the cgroup's subhierarchy has tasks in it or
not.  Its value is 0 if there is no task in the cgroup and its
descendants; otherwise, 1, and kernfs_notify() notificaiton is
triggers when the value changes, which can be monitored through poll
and [di]notify.

This is a lot ligther and simpler and trivially allows delegating
management of subhierarchy - subhierarchy monitoring can block further
propgation simply by putting itself or another process in the root of
the subhierarchy and monitor events that it's interested in from there
without interfering with monitoring higher in the tree.

v2: Patch description updated as per Serge.

v3: "cgroup.subtree_populated" renamed to "cgroup.populated".  The
    subtree_ prefix was a bit confusing because
    "cgroup.subtree_control" uses it to denote the tree rooted at the
    cgroup sans the cgroup itself while the populated state includes
    the cgroup itself.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Lennart Poettering <lennart@poettering.net>

cgroup is switching away from multiple hierarchies and will use one
unified default hierarchy where controllers can be dynamically enabled
and disabled per subtree.  The default hierarchy will serve as the
unified hierarchy to which all controllers are attached and a css on
the default hierarchy would need to also serve the tasks of descendant
cgroups which don't have the controller enabled - ie. the tree may be
collapsed from leaf towards root when viewed from specific
controllers.  This has been implemented through effective css in the
previous patches.

This patch finally implements dynamic subtree controller
enable/disable on the default hierarchy via a new knob -
"cgroup.subtree_control" which controls which controllers are enabled
on the child cgroups.  Let's assume a hierarchy like the following.

  root - A - B - C
               \ D

root's "cgroup.subtree_control" determines which controllers are
enabled on A.  A's on B.  B's on C and D.  This coincides with the
fact that controllers on the immediate sub-level are used to
distribute the resources of the parent.  In fact, it's natural to
assume that resource control knobs of a child belong to its parent.
Enabling a controller in "cgroup.subtree_control" declares that
distribution of the respective resources of the cgroup will be
controlled.  Note that this means that controller enable states are
shared among siblings.

The default hierarchy has an extra restriction - only cgroups which
don't contain any task may have controllers enabled in
"cgroup.subtree_control".  Combined with the other properties of the
default hierarchy, this guarantees that, from the view point of
controllers, tasks are only on the leaf cgroups.  In other words, only
leaf csses may contain tasks.  This rules out situations where child
cgroups compete against internal tasks of the parent, which is a
competition between two different types of entities without any clear
way to determine resource distribution between the two.  Different
controllers handle it differently and all the implemented behaviors
are ambiguous, ad-hoc, cumbersome and/or just wrong.  Having this
structural constraints imposed from cgroup core removes the burden
from controller implementations and enables showing one consistent
behavior across all controllers.

When a controller is enabled or disabled, css associations for the
controller in the subtrees of each child should be updated.  After
enabling, the whole subtree of a child should point to the new css of
the child.  After disabling, the whole subtree of a child should point
to the cgroup's css.  This is implemented by first updating cgroup
states such that cgroup_e_css() result points to the appropriate css
and then invoking cgroup_update_dfl_csses() which migrates all tasks
in the affected subtrees to the self cgroup on the default hierarchy.

* When read, "cgroup.subtree_control" lists all the currently enabled
  controllers on the children of the cgroup.

* White-space separated list of controller names prefixed with either
  '+' or '-' can be written to "cgroup.subtree_control".  The ones
  prefixed with '+' are enabled on the controller and '-' disabled.

* A controller can be enabled iff the parent's
  "cgroup.subtree_control" enables it and disabled iff no child's
  "cgroup.subtree_control" has it enabled.

* If a cgroup has tasks, no controller can be enabled via
  "cgroup.subtree_control".  Likewise, if "cgroup.subtree_control" has
  some controllers enabled, tasks can't be migrated into the cgroup.

* All controllers which aren't bound on other hierarchies are
  automatically associated with the root cgroup of the default
  hierarchy.  All the controllers which are bound to the default
  hierarchy are listed in the read-only file "cgroup.controllers" in
  the root directory.

* "cgroup.controllers" in all non-root cgroups is read-only file whose
  content is equal to that of "cgroup.subtree_control" of the parent.
  This indicates which controllers can be used in the cgroup's
  "cgroup.subtree_control".

This is still experimental and there are some holes, one of which is
that ->can_attach() failure during cgroup_update_dfl_csses() may leave
the cgroups in an undefined state.  The issues will be addressed by
future patches.

v2: Non-root cgroups now also have "cgroup.controllers".
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

To implement the unified hierarchy behavior, we'll need to be able to
determine the associated cgroup on the default hierarchy from css_set.
Let's add css_set->dfl_cgrp so that it can be accessed conveniently
and efficiently.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, css_task_iter iterates tasks associated with a css by
visiting each css_set associated with the owning cgroup and walking
tasks of each of them.  This works fine for !unified hierarchies as
each cgroup has its own css for each associated subsystem on the
hierarchy; however, on the planned unified hierarchy, a cgroup may not
have csses associated and its tasks would be considered associated
with the matching css of the nearest ancestor which has the subsystem
enabled.

This means that on the default unified hierarchy, just walking all
tasks associated with a cgroup isn't enough to walk all tasks which
are associated with the specified css.  If any of its children doesn't
have the matching css enabled, task iteration should also include all
tasks from the subtree.  We already added cgroup->e_csets[] to list
all css_sets effectively associated with a given css and walk css_sets
on that list instead to achieve such iteration.

This patch updates css_task_iter iteration such that it walks css_sets
on cgroup->e_csets[] instead of cgroup->cset_links if iteration is
requested on an non-dummy css.  Thanks to the previous iteration
update, this change can be achieved with the addition of
css_task_iter->ss and minimal updates to css_advance_task_iter() and
css_task_iter_start().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

This patch reorganizes css_task_iter so that adding effective css
support is easier.

* s/->cset_link/->cset_pos/ and s/->task/->task_pos/ for consistency

* ->origin_css is used to determine whether the iteration reached the
  last css_set.  Replace it with explicit ->cset_head so that
  css_advance_task_iter() doesn't have to know the termination
  condition directly.

* css_task_iter_next() currently assumes that it's walking list of
  cgrp_cset_link and reaches into the current cset through the current
  link to determine the termination conditions for task walking.  As
  this won't always be true for effective css walking, add
  ->tasks_head and ->mg_tasks_head and use them to control task
  walking so that css_task_iter_next() doesn't have to know how
  css_sets are being walked.

This patch doesn't make any behavior changes.  The iteration logic
stays unchanged after the patch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

On the default unified hierarchy, a cgroup may be associated with
csses of its ancestors, which means that a css of a given cgroup may
be associated with css_sets of descendant cgroups.  This means that we
can't walk all tasks associated with a css by iterating the css_sets
associated with the cgroup as there are css_sets which are pointing to
the css but linked on the descendants.

This patch adds per-subsystem list heads cgroup->e_csets[].  Any
css_set which is pointing to a css is linked to
css->cgroup->e_csets[$SUBSYS_ID] through
css_set->e_cset_node[$SUBSYS_ID].  The lists are protected by
css_set_rwsem and will allow us to walk all css_sets associated with a
given css so that we can find out all associated tasks.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

94419627 ("cgroup: move ->subsys_mask from cgroupfs_root to
cgroup") moved ->subsys_mask from cgroup_root to cgroup to prepare for
the unified hierarhcy; however, it turns out that carrying the
subsys_mask of the children in the parent, instead of itself, is a lot
more natural.  This patch restores cgroup_root->subsys_mask and morphs
cgroup->subsys_mask into cgroup->child_subsys_mask.

* Uses of root->cgrp.subsys_mask are restored to root->subsys_mask.

* Remove automatic setting and clearing of cgrp->subsys_mask and
  instead just inherit ->child_subsys_mask from the parent during
  cgroup creation.  Note that this doesn't affect any current
  behaviors.

* Undo __kill_css() separation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

This cftype flag makes the file only appear on the default hierarchy.
This will later be used for cgroup.controllers file.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgrp_dfl_root will be used as the default unified hierarchy.  This
patch makes cgrp_dfl_root mountable by making the following changes.

* cgroup_init_early() now initializes cgrp_dfl_root w/
  CGRP_ROOT_SANE_BEHAVIOR.  The default hierarchy is always sane.

* parse_cgroupfs_options() and cgroup_mount() are updated such that
  cgrp_dfl_root is mounted if sane_behavior is specified w/o any
  subsystems.

* rebind_subsystems() now populates the root directory of
  cgrp_dfl_root.  Note that the function still guarantees success of
  rebinding subsystems to cgrp_dfl_root.  If populating fails while
  rebinding to cgrp_dfl_root, it whines but ignores the error.

* For backward compatibility, the default hierarchy shows up in
  /proc/$PID/cgroup only after it's explicitly mounted so that
  userland which doesn't make use of it doesn't see any change.

* "current_css_set_cg_links" file of debug cgroup now treats the
  default hierarchy the same as other hierarchies.  This is visible to
  userland.  Given that it's for debug controller, this should be
  fine.

* While at it, implement cgroup_on_dfl() which tests whether a give
  cgroup is on the default hierarchy or not.

The above changes make cgrp_dfl_root mostly equivalent to other
controllers but the actual unified hierarchy behaviors are not
implemented yet.  Let's plug child cgroup creation in cgrp_dfl_root
from create_cgroup() for now.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cftype->write_string() just passes on the writeable buffer from kernfs
and there's no reason to add const restriction on the buffer.  The
only thing const achieves is unnecessarily complicating parsing of the
buffer.  Drop const from @buffer.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>                                           
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

The dummy root will be repurposed to serve as the default unified
hierarchy.  Let's rename things in preparation.

* s/cgroup_dummy_root/cgrp_dfl_root/
* s/cgroupfs_root/cgroup_root/ as we don't do fs part directly anymore
* s/cgroup_root->top_cgroup/cgroup_root->cgrp/ for brevity

This is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroupfs_root->subsys_mask represents the controllers attached to the
hierarchy.  This patch moves the field to cgroup.  Subsystem
initialization and rebinding updates the top cgroup's subsys_mask.
For !root cgroups, the subsys_mask bits are set from create_css() and
cleared from kill_css(), which effectively means that all cgroups will
have the same subsys_mask as the top cgroup.

While this doesn't make any difference now, this will help
implementation of the default unified hierarchy where !root cgroups
may have subsets of the top_cgroup's subsys_mask.

While at it, __kill_css() is split out of kill_css().  The former
doesn't care about the subsys_mask while the latter becomes noop if
the controller is already killed and clears the matching bit if not
before proceeding to killing the css.  This will be used later by the
default unified hierarchy implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

The dummy hierarchy is now a fully functional one and dummy_top has a
kernfs_node associated with it.  Drop the NULL checks in
[pr_cont_]cont_{name|path}() which are no longer necessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

For optimization, task_lock() is additionally used to protect
task->cgroups.  The optimization is pretty dubious as either
css_set_rwsem is grabbed anyway or PF_EXITING already protects
task->cgroups.  It adds only overhead and confusion at this point.
Let's drop task_[un]lock() and update comments accordingly.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, process / task migration is a single operation which may
fail depending on memory pressure or the involved controllers'
->can_attach() callbacks.  One problem with this approach is migration
of multiple targets.  It's impossible to tell whether a given target
will be successfully migrated beforehand and cgroup core can't keep
track of enough states to roll back after intermediate failure.

This is already an issue with cgroup_transfer_tasks().  Also, we're
gonna need multiple target migration for unified hierarchy.

This patch splits migration into four stages -
cgroup_migrate_add_src(), cgroup_migrate_prepare_dst(),
cgroup_migrate() and cgroup_migrate_finish(), where
cgroup_migrate_prepare_dst() performs all the operations which may
fail due to allocation failure without actually migrating the target.

The four separate stages mean that, disregarding ->can_attach()
failures, the success or failure of multi target migration can be
determined before performing any actual migration.  If preparations of
all targets succeed, the whole thing will succeed.  If not, the whole
operation can fail without any side-effect.

Since the previous patch to use css_set->mg_tasks to keep track of
migration targets, the only thing which may need memory allocation
during migration is the target css_sets.  cgroup_migrate_prepare()
pins all source and target css_sets and link them up.  Note that this
can be performed without holding threadgroup_lock even if the target
is a process.  As long as cgroup_mutex is held, no new css_set can be
put into play.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, while migrating tasks from one cgroup to another,
cgroup_attach_task() builds a flex array of all target tasks;
unfortunately, this has a couple issues.

* Flex array has size limit.  On 64bit, struct task_and_cgroup is
  24bytes making the flex element limit around 87k.  It is a high
  number but not impossible to hit.  This means that the current
  cgroup implementation can't migrate a process with more than 87k
  threads.

* Process migration involves memory allocation whose size is dependent
  on the number of threads the process has.  This means that cgroup
  core can't guarantee success or failure of multi-process migrations
  as memory allocation failure can happen in the middle.  This is in
  part because cgroup can't grab threadgroup locks of multiple
  processes at the same time, so when there are multiple processes to
  migrate, it is imposible to tell how many tasks are to be migrated
  beforehand.

  Note that this already affects cgroup_transfer_tasks().  cgroup
  currently cannot guarantee atomic success or failure of the
  operation.  It may fail in the middle and after such failure cgroup
  doesn't have enough information to roll back properly.  It just
  aborts with some tasks migrated and others not.

To resolve the situation, this patch updates the migration path to use
task->cg_list to track target tasks.  The previous patch already added
css_set->mg_tasks and updated iterations in non-migration paths to
include them during task migration.  This patch updates migration path
to actually make use of it.

Instead of putting onto a flex_array, each target task is moved from
its css_set->tasks list to css_set->mg_tasks and the migration path
keeps trace of all the source css_sets and the associated cgroups.
Once all source css_sets are determined, the destination css_set for
each is determined, linked to the matching source css_set and put on a
separate list.

To iterate the target tasks, migration path just needs to iterat
through either the source or target css_sets, depending on whether
migration has been committed or not, and the tasks on their ->mg_tasks
lists.  cgroup_taskset is updated to contain the list_heads for source
and target css_sets and the iteration cursor.  cgroup_taskset_*() are
accordingly updated to walk through css_sets and their ->mg_tasks.

This resolves the above listed issues with moderate additional
complexity.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, while migrating tasks from one cgroup to another,
cgroup_attach_task() builds a flex array of all target tasks;
unfortunately, this has a couple issues.

* Flex array has size limit.  On 64bit, struct task_and_cgroup is
  24bytes making the flex element limit around 87k.  It is a high
  number but not impossible to hit.  This means that the current
  cgroup implementation can't migrate a process with more than 87k
  threads.

* Process migration involves memory allocation whose size is dependent
  on the number of threads the process has.  This means that cgroup
  core can't guarantee success or failure of multi-process migrations
  as memory allocation failure can happen in the middle.  This is in
  part because cgroup can't grab threadgroup locks of multiple
  processes at the same time, so when there are multiple processes to
  migrate, it is imposible to tell how many tasks are to be migrated
  beforehand.

  Note that this already affects cgroup_transfer_tasks().  cgroup
  currently cannot guarantee atomic success or failure of the
  operation.  It may fail in the middle and after such failure cgroup
  doesn't have enough information to roll back properly.  It just
  aborts with some tasks migrated and others not.

To resolve the situation, we're going to use task->cg_list during
migration too.  Instead of building a separate array, target tasks
will be linked into a dedicated migration list_head on the owning
css_set.  Tasks on the migration list are treated the same as tasks on
the usual tasks list; however, being on a separate list allows cgroup
migration code path to keep track of the target tasks by simply
keeping the list of css_sets with tasks being migrated, making
unpredictable dynamic allocation unnecessary.

In prepartion of such migration path update, this patch introduces
css_set->mg_tasks list and updates css_set task iterations so that
they walk both css_set->tasks and ->mg_tasks.  Note that ->mg_tasks
isn't used yet.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

My kernel fails to boot, because blkcg calls cgroup_path() while
cgroupfs is not mounted.

Fix both cgroup_name() and cgroup_path().
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

The two functions don't have any users left.  Remove them along with
cgroup_taskset->cur_cgrp.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

If !NULL, @skip_css makes cgroup_taskset_for_each() skip the matching
css.  The intention of the interface is to make it easy to skip css's
(cgroup_subsys_states) which already match the migration target;
however, this is entirely unnecessary as migration taskset doesn't
include tasks which are already in the target cgroup.  Drop @skip_css
from cgroup_taskset_for_each().
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Daniel Borkmann <dborkman@redhat.com>

css_scan_tasks() doesn't have any user left.  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup_task_count() read-locks css_set_lock and walks all tasks to
count them and then returns the result.  The only thing all the users
want is determining whether the cgroup is empty or not.  This patch
implements cgroup_has_tasks() which tests whether cgroup->cset_links
is empty, replaces all cgroup_task_count() usages and unexports it.

Note that the test isn't synchronized.  This is the same as before.
The test has always been racy.

This will help planned css_set locking update.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

Before kernfs conversion, due to the way super_block lookup works,
cgroup roots were created and made visible before being fully
initialized.  This in turn required a special flag to mark that the
root hasn't been fully initialized so that the destruction path can
tell fully bound ones from half initialized.

That flag is CGRP_ROOT_SUBSYS_BOUND and no longer necessary after the
kernfs conversion as the lookup and creation of new root are atomic
w.r.t. cgroup_mutex.  This patch removes the flag and passes the
requests subsystem mask to cgroup_setup_root() so that it can set the
respective mask bits as subsystems are bound.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Disallow more mount options if sane_behavior.  Note that xattr used to
generate warning.

While at it, simplify option check in cgroup_mount() and update
sane_behavior comment in cgroup.h.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Currently, cgroupfs_root and its ->top_cgroup are separated reference
counted and the latter's is ignored.  There's no reason to do this
separately.  This patch removes cgroupfs_root->refcnt and destroys
cgroupfs_root when the top_cgroup is released.

* cgroup_put() updated to ignore cgroup_is_dead() test for top
  cgroups.  cgroup_free_fn() updated to handle root destruction when
  releasing a top cgroup.

* As root destruction is now bounced through cgroup destruction, it is
  asynchronous.  Update cgroup_mount() so that it waits for pending
  release which is currently implemented using msleep().  Converting
  this to proper wait_queue isn't hard but likely unnecessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

root->number_of_cgroups is currently an integer protected with
cgroup_mutex.  Except for sanity checks and proc reporting, the only
place it's used is to check whether the root has any child during
remount; however, this is a bit flawed as the counter is not
decremented when the cgroup is unlinked but when it's released,
meaning that there could be an extended period where all cgroups are
removed but remount is still not allowed because some internal objects
are lingering.  While not perfect either, it'd be better to use
emptiness test on root->top_cgroup.children.

This patch updates cgroup_remount() to test top_cgroup's children
instead, which makes number_of_cgroups only actual usage statistics
printing in proc implemented in proc_cgroupstats_show().  Let's
shorten its name and make it an atomic_t so that we don't have to
worry about its synchronization.  It's purely auxiliary at this point.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup->name handling became quite complicated over time involving
dedicated struct cgroup_name for RCU protection.  Now that cgroup is
on kernfs, we can drop all of it and simply use kernfs_name/path() and
friends.  Replace cgroup->name and all related code with kernfs
name/path constructs.

* Reimplement cgroup_name() and cgroup_path() as thin wrappers on top
  of kernfs counterparts, which involves semantic changes.
  pr_cont_cgroup_name() and pr_cont_cgroup_path() added.

* cgroup->name handling dropped from cgroup_rename().

* All users of cgroup_name/path() updated to the new semantics.  Users
  which were formatting the string just to printk them are converted
  to use pr_cont_cgroup_name/path() instead, which simplifies things
  quite a bit.  As cgroup_name() no longer requires RCU read lock
  around it, RCU lockings which were protecting only cgroup_name() are
  removed.

v2: Comment above oom_info_lock updated as suggested by Michal.

v3: dummy_top doesn't have a kn associated and
    pr_cont_cgroup_name/path() ended up calling the matching kernfs
    functions with NULL kn leading to oops.  Test for NULL kn and
    print "/" if so.  This issue was reported by Fengguang Wu.

v4: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>

cftype_set was added primarily to allow registering the same cftype
array more than once for different subsystems.  Nobody uses or needs
such thing and it's already broken because each cftype has ->ss
pointer which is initialized during registration.

Let's add list_head ->node to cftype and use the first cftype entry in
the array to link them instead of allocating separate cftype_set.
While at it, trigger WARN if cft seems previously initialized during
registration.

This simplifies cftype handling a bit.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

Mount option "xattr" is no longer necessary as it's enabled by default
on kernfs.  Warn if "xattr" is specified with "sane_behavior" so that
the option can be removed in the future.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

cgroup filesystem code was derived from the original sysfs
implementation which was heavily intertwined with vfs objects and
locking with the goal of re-using the existing vfs infrastructure.
That experiment turned out rather disastrous and sysfs switched, a
long time ago, to distributed filesystem model where a separate
representation is maintained which is queried by vfs.  Unfortunately,
cgroup stuck with the failed experiment all these years and
accumulated even more problems over time.

Locking and object lifetime management being entangled with vfs is
probably the most egregious.  vfs is never designed to be misused like
this and cgroup ends up jumping through various convoluted dancing to
make things work.  Even then, operations across multiple cgroups can't
be done safely as it'll deadlock with rename locking.

Recently, kernfs is separated out from sysfs so that it can be used by
users other than sysfs.  This patch converts cgroup to use kernfs,
which will bring the following benefits.

* Separation from vfs internals.  Locking and object lifetime
  management is contained in cgroup proper making things a lot
  simpler.  This removes significant amount of locking convolutions,
  hairy object lifetime rules and the restriction on multi-cgroup
  operations.

* Can drop a lot of code to implement filesystem interface as most are
  provided by kernfs.

* Proper "severing" semantics, which allows controllers to not worry
  about lingering file accesses after offline.

While the preceding patches did as much as possible to make the
transition less painful, large part of the conversion has to be one
discrete step making this patch rather large.  The rest of the commit
message lists notable changes in different areas.

Overall
-------

* vfs constructs replaced with kernfs ones.  cgroup->dentry w/ ->kn,
  cgroupfs_root->sb w/ ->kf_root.

* All dentry accessors are removed.  Helpers to map from kernfs
  constructs are added.

* All vfs plumbing around dentry, inode and bdi removed.

* cgroup_mount() now directly looks for matching root and then
  proceeds to create a new one if not found.

Synchronization and object lifetime
-----------------------------------

* vfs inode locking removed.  Among other things, this removes the
  need for the convolution in cgroup_cfts_commit().  Future patches
  will further simplify it.

* vfs refcnting replaced with cgroup internal ones.  cgroup->refcnt,
  cgroupfs_root->refcnt added.  cgroup_put_root() now directly puts
  root->refcnt and when it reaches zero proceeds to destroy it thus
  merging cgroup_put_root() and the former cgroup_kill_sb().
  Simliarly, cgroup_put() now directly schedules cgroup_free_rcu()
  when refcnt reaches zero.

* Unlike before, kernfs objects don't hold onto cgroup objects.  When
  cgroup destroys a kernfs node, all existing operations are drained
  and the association is broken immediately.  The same for
  cgroupfs_roots and mounts.

* All operations which come through kernfs guarantee that the
  associated cgroup is and stays valid for the duration of operation;
  however, there are two paths which need to find out the associated
  cgroup from dentry without going through kernfs -
  css_tryget_from_dir() and cgroupstats_build().  For these two,
  kernfs_node->priv is RCU managed so that they can dereference it
  under RCU read lock.

File and directory handling
---------------------------

* File and directory operations converted to kernfs_ops and
  kernfs_syscall_ops.

* xattrs is implicitly supported by kernfs.  No need to worry about it
  from cgroup.  This means that "xattr" mount option is no longer
  necessary.  A future patch will add a deprecated warning message
  when sane_behavior.

* When cftype->max_write_len > PAGE_SIZE, it's necessary to make a
  private copy of one of the kernfs_ops to set its atomic_write_len.
  cftype->kf_ops is added and cgroup_init/exit_cftypes() are updated
  to handle it.

* cftype->lockdep_key added so that kernfs lockdep annotation can be
  per cftype.

* Inidividual file entries and open states are now managed by kernfs.
  No need to worry about them from cgroup.  cfent, cgroup_open_file
  and their friends are removed.

* kernfs_nodes are created deactivated and kernfs_activate()
  invocations added to places where creation of new nodes are
  committed.

* cgroup_rmdir() uses kernfs_[un]break_active_protection() for
  self-removal.

v2: - Li pointed out in an earlier patch that specifying "name="
      during mount without subsystem specification should succeed if
      there's an existing hierarchy with a matching name although it
      should fail with -EINVAL if a new hierarchy should be created.
      Prior to the conversion, this used by handled by deferring
      failure from NULL return from cgroup_root_from_opts(), which was
      necessary because root was being created before checking for
      existing ones.  Note that cgroup_root_from_opts() returned an
      ERR_PTR() value for error conditions which require immediate
      mount failure.

      As we now have separate search and creation steps, deferring
      failure from cgroup_root_from_opts() is no longer necessary.
      cgroup_root_from_opts() is updated to always return ERR_PTR()
      value on failure.

    - The logic to match existing roots is updated so that a mount
      attempt with a matching name but different subsys_mask are
      rejected.  This was handled by a separate matching loop under
      the comment "Check for name clashes with existing mounts" but
      got lost during conversion.  Merge the check into the main
      search loop.

    - Add __rcu __force casting in RCU_INIT_POINTER() in
      cgroup_destroy_locked() to avoid the sparse address space
      warning reported by kbuild test bot.  Maybe we want an explicit
      interface to use kn->priv as RCU protected pointer?

v3: Make CONFIG_CGROUPS select CONFIG_KERNFS.

v4: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: kbuild test robot fengguang.wu@intel.com>

* Un-inline seq_css().  After kernfs conversion, the function will
  need to dereference internal data structures.

* Add cgroup_get/put_root() and replace direct super_block->s_active
  manipulatinos with them.  These will be converted to kernfs_root
  refcnting.

* Add cgroup_get/put() and replace dget/put() on cgrp->dentry with
  them.  These will be converted to kernfs refcnting.

* Update current_css_set_cg_links_read() to use cgroup_name() instead
  of reaching into the dentry name.  The end result is the same.

These changes don't make functional differences but will make
transition to kernfs easier.

v2: Rebased on top of 0ab02ca8 ("cgroup: protect modifications to
    cgroup_idr with cgroup_mutex").
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>

mm/memory-failure.c::hwpoison_filter_task() has been reaching into
cgroup to extract the associated ino to be used as a filtering
criterion.  This is an implementation detail which shouldn't be
depended upon from outside cgroup proper and is about to change with
the scheduled kernfs conversion.

This patch introduces a proper interface to determine the associated
ino, cgroup_ino(), and updates hwpoison_filter_task() to use it
instead of reaching directly into cgroup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>