1. 19 6月, 2008 18 次提交
  2. 18 6月, 2008 22 次提交
    • P
      [POWERPC] Clear sub-page HPTE present bits when demoting page size · 65ba6cdc
      Paul Mackerras 提交于
      When we demote a slice from 64k to 4k, and we are about to insert an
      HPTE for a 4k subpage and we notice that there is an existing 64k
      HPTE, we first invalidate that HPTE before inserting the new 4k
      subpage HPTE.  Since the bits that encode which hash bucket the old
      HPTE was in overlap with the bits that encode which of the 16 subpages
      have HPTEs, we need to clear out the subpage HPTE-present bits before
      starting to insert HPTEs for the 4k subpages.  If we don't do that, we
      can erroneously think that a subpage already has an HPTE when it
      doesn't.
      
      That in itself wouldn't be such a problem except that when we go to
      update the HPTE that we think is present on machines with a
      hypervisor, the hypervisor can tell us that the HPTE we think is there
      is actually there even though it isn't, which can lead to a process
      getting stuck in a loop, continually faulting.  The reason for the
      confusion is that the AVPN (abbreviated virtual page number) we are
      looking for in the HPTE for a 4k subpage can actually match the AVPN
      in a stale HPTE for another 64k page.  For example, the HPTE for
      the 4k subpage at 0x84000f000 will be in the same hash bucket and have
      the same AVPN as the HPTE for the 64k page at 0x8400f0000.
      
      This fixes the code to clear out the subpage HPTE-present bits.
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      65ba6cdc
    • J
      [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector · b17879f7
      Josh Boyer 提交于
      A recent commit added support for the new 440x6 and 464 cores that have the
      added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the
      TLBs.  The new bits were cleared in the finish_tlb_load function, however a
      similar bit of code was missed in the DataStorage interrupt vector.
      Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
      Signed-off-by: NPaul Mackerras <paulus@samba.org>
      b17879f7
    • P
      netlink: genl: fix circular locking · 6d1a3fb5
      Patrick McHardy 提交于
      genetlink has a circular locking dependency when dumping the registered
      families:
      
      - dump start:
      genl_rcv()            : take genl_mutex
      genl_rcv_msg()        : call netlink_dump_start() while holding genl_mutex
      netlink_dump_start(),
      netlink_dump()        : take nlk->cb_mutex
      ctrl_dumpfamily()     : try to detect this case and not take genl_mutex a
                              second time
      
      - dump continuance:
      netlink_rcv()         : call netlink_dump
      netlink_dump          : take nlk->cb_mutex
      ctrl_dumpfamily()     : take genl_mutex
      
      Register genl_lock as callback mutex with netlink to fix this. This slightly
      widens an already existing module unload race, the genl ops used during the
      dump might go away when the module is unloaded. Thomas Graf is working on a
      seperate fix for this.
      Signed-off-by: NPatrick McHardy <kaber@trash.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6d1a3fb5
    • D
      Revert "mac80211: Use skb_header_cloned() on TX path." · 3a5be7d4
      David S. Miller 提交于
      This reverts commit 608961a5.
      
      The problem is that the mac80211 stack not only needs to be able to
      muck with the link-level headers, it also might need to mangle all of
      the packet data if doing sw wireless encryption.
      
      This fixes kernel bugzilla #10903.  Thanks to Didier Raboud (for the
      bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for
      bringing this bisection analysis to my attention), and Ilpo (for
      trying to analyze this purely from the TCP side).
      
      In 2.6.27 we can take another stab at this, by using something like
      skb_cow_data() when the TX path of mac80211 ends up with a non-NULL
      tx->key.  The ESP protocol code in the IPSEC stack can be used as a
      model for implementation.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3a5be7d4
    • R
      af_unix: fix 'poll for write'/ connected DGRAM sockets · 3c73419c
      Rainer Weikusat 提交于
      The unix_dgram_sendmsg routine implements a (somewhat crude)
      form of receiver-imposed flow control by comparing the length of the
      receive queue of the 'peer socket' with the max_ack_backlog value
      stored in the corresponding sock structure, either blocking
      the thread which caused the send-routine to be called or returning
      EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET
      sockets. The poll-implementation for these socket types is
      datagram_poll from core/datagram.c. A socket is deemed to be writeable
      by this routine when the memory presently consumed by datagrams
      owned by it is less than the configured socket send buffer size. This
      is always wrong for connected PF_UNIX non-stream sockets when the
      abovementioned receive queue is currently considered to be full.
      'poll' will then return, indicating that the socket is writeable, but
      a subsequent write result in EAGAIN, effectively causing an
      (usual) application to 'poll for writeability by repeated send request
      with O_NONBLOCK set' until it has consumed its time quantum.
      
      The change below uses a suitably modified variant of the datagram_poll
      routines for both type of PF_UNIX sockets, which tests if the
      recv-queue of the peer a socket is connected to is presently
      considered to be 'full' as part of the 'is this socket
      writeable'-checking code. The socket being polled is additionally
      put onto the peer_wait wait queue associated with its peer, because the
      unix_dgram_sendmsg routine does a wake up on this queue after a
      datagram was received and the 'other wakeup call' is done implicitly
      as part of skb destruction, meaning, a process blocked in poll
      because of a full peer receive queue could otherwise sleep forever
      if no datagram owned by its socket was already sitting on this queue.
      Among this change is a small (inline) helper routine named
      'unix_recvq_full', which consolidates the actual testing code (in three
      different places) into a single location.
      Signed-off-by: NRainer Weikusat <rweikusat@mssgmbh.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3c73419c
    • D
    • A
      tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set · f09f7ee2
      Ang Way Chuang 提交于
      By default, tun.c running in TUN_TUN_DEV mode will set the protocol of
      packet to IPv4 if TUN_NO_PI is set. My program failed to work when I
      assumed that the driver will check the first nibble of packet,
      determine IP version and set the appropriate protocol.
      Signed-off-by: NAng Way Chuang <wcang@nav6.org>
      Acked-by: NMax Krasnyansky <maxk@qualcomm.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f09f7ee2
    • R
      atl1: relax eeprom mac address error check · 58c7821c
      Radu Cristescu 提交于
      The atl1 driver tries to determine the MAC address thusly:
      
      	- If an EEPROM exists, read the MAC address from EEPROM and
      	  validate it.
      	- If an EEPROM doesn't exist, try to read a MAC address from
      	  SPI flash.
      	- If that fails, try to read a MAC address directly from the
      	  MAC Station Address register.
      	- If that fails, assign a random MAC address provided by the
      	  kernel.
      
      We now have a report of a system fitted with an EEPROM containing all
      zeros where we expect the MAC address to be, and we currently handle
      this as an error condition.  Turns out, on this system the BIOS writes
      a valid MAC address to the NIC's MAC Station Address register, but we
      never try to read it because we return an error when we find the all-
      zeros address in EEPROM.
      
      This patch relaxes the error check and continues looking for a MAC
      address even if it finds an illegal one in EEPROM.
      Signed-off-by: NRadu Cristescu <advantis@gmx.net>
      Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      58c7821c
    • D
      net/enc28j60: low power mode · 7dac6f8d
      David Brownell 提交于
      Keep enc28j60 chips in low-power mode when they're not in use.
      At typically 120 mA, these chips run hot even when idle; this
      low power mode cuts that power usage by a factor of around 100.
      
      This version provides a generic routine to poll a register until
      its masked value equals some value ... e.g. bit set or cleared.
      It's basically what the previous wait_phy_ready() did, but this
      version is generalized to support the handshaking needed to
      enter and exit low power mode.
      Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
      Signed-off-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      7dac6f8d
    • D
      net/enc28j60: section fix · 6fd65882
      David Brownell 提交于
      Minor bugfixes to the enc28j60 driver ... wrong section marking,
      indentation, and bogus use of spi_bus_type.
      Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
      Acked-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      6fd65882
    • S
      sky2: 88E8040T pci device id · a3b4fced
      Stephen Hemminger 提交于
      Missed one pci id for 88E8040T.
      Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      a3b4fced
    • D
      netxen: download firmware in pci probe · 439b454e
      Dhananjay Phadke 提交于
      Downloading firmware in pci probe allows recovery in case of
      firmware failure by reloading the driver.
      
      Also reduced delays in firmware load.
      Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      439b454e
    • D
      netxen: cleanup debug messages · dcd56fdb
      Dhananjay Phadke 提交于
      o Remove unnecessary debug prints and functions.
      o Explicitly specify pci class (0x020000) to avoid enabling
        management function.
      Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      dcd56fdb
    • D
      netxen: remove global physical_port array · 3276fbad
      Dhananjay Phadke 提交于
      Store physical port number in netxen_adapter structure.
      Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      3276fbad
    • D
      netxen: fix portnum for hp mezz cards · dc515f2e
      Dhananjay Phadke 提交于
      This fixes a the issue where logical port number is set incorrectly
      for HP blade mezz cards.
      Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      dc515f2e
    • J
      ibm_newemac: select CRC32 in Kconfig · 8b8091fb
      Josh Boyer 提交于
      The ibm_newemac driver requires ether_crc to be defined.  Apparently it is
      possible to generate a .config without CONFIG_CRC32 set which causes the
      following link errors if IBM_NEW_EMAC is selected:
      
        LD      .tmp_vmlinux1
      drivers/built-in.o: In function `emac_hash_mc':
      core.c:(.text+0x2f524): undefined reference to `crc32_le'
      core.c:(.text+0x2f528): undefined reference to `bitrev32'
      make: *** [.tmp_vmlinux1] Error 1
      
      This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error.
      Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
      Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      8b8091fb
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 952f4a0a
      Linus Torvalds 提交于
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: appletouch - implement reset-resume logic
        Input: i8042 - retry failed CTR writes when resuming
        Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table
        Input: pcspkr - remove negative dependency on snd-pcsp
      
      Manually fixed up trivial conflict in drivers/usb/core/quirks.c
      952f4a0a
    • M
      fuse: fix thinko in max I/O size calucation · f948d564
      Miklos Szeredi 提交于
      Use max not min to enforce a lower limit on the max I/O size.
      
      This bug was introduced by "fuse: fix max i/o size calculation" (commit
      e5d9a0df).
      
      Thanks to Brian Wang for noticing.
      Reported-by: NBrian Wang <ywang221@hotmail.com>
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Acked-by: NSzabolcs Szakacsits <szaka@ntfs-3g.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f948d564
    • E
      Unignore vmlinux.lds.h from Git. · cd50e892
      Eduard - Gabriel Munteanu 提交于
      Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored.
      Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
      Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cd50e892
    • L
      x86-64: Fix "bytes left to copy" return value for copy_from_user() · 42a886af
      Linus Torvalds 提交于
      Most users by far do not care about the exact return value (they only
      really care about whether the copy succeeded in its entirety or not),
      but a few special core routines actually care deeply about exactly how
      many bytes were copied from user space.
      
      And the unrolled versions of the x86-64 user copy routines would
      sometimes report that it had copied more bytes than it actually had.
      
      Very few uses actually have partial copies to begin with, but to make
      this bug even harder to trigger, most x86 CPU's use the "rep string"
      instructions for normal user copies, and that version didn't have this
      issue.
      
      To make it even harder to hit, the one user of this that really cared
      about the return value (and used the uncached version of the copy that
      doesn't use the "rep string" instructions) was the generic write
      routine, which pre-populated its source, once more hiding the problem by
      avoiding the exception case that triggers the bug.
      
      In other words, very special thanks to Bron Gondwana who not only
      triggered this, but created a test-program to show it, and bisected the
      behavior down to commit 08291429 ("mm:
      fix pagecache write deadlocks") which changed the access pattern just
      enough that you can now trigger it with 'writev()' with multiple
      iovec's.
      
      That commit itself was not the cause of the bug, it just allowed all the
      stars to align just right that you could trigger the problem.
      
      [ Side note: this is just the minimal fix to make the copy routines
        (with __copy_from_user_inatomic_nocache as the particular version that
        was involved in showing this) have the right return values.
      
        We really should improve on the exceptional case further - to make the
        copy do a byte-accurate copy up to the exact page limit that causes it
        to fail.  As it is, the callers have to do extra work to handle the
        limit case gracefully. ]
      Reported-by: NBron Gondwana <brong@fastmail.fm>
      Cc: Nick Piggin <npiggin@suse.de>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Al Viro <viro@ZenIV.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      
       (which didn't have this problem), and since
      most users that do the carethis was very hard to trigger, but
      42a886af
    • S
      xfrm: fix fragmentation for ipv4 xfrm tunnel · fe833fca
      Steffen Klassert 提交于
      When generating the ip header for the transformed packet we just copy
      the frag_off field of the ip header from the original packet to the ip
      header of the new generated packet. If we receive a packet as a chain
      of fragments, all but the last of the new generated packets have the
      IP_MF flag set. We have to mask the frag_off field to only keep the
      IP_DF flag from the original packet. This got lost with git commit
      36cf9acf ("[IPSEC]: Separate
      inner/outer mode processing on output")
      Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
      Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fe833fca
    • P
      netfilter: nf_conntrack_h323: fix module unload crash · a56b8f81
      Patrick McHardy 提交于
      The H.245 helper is not registered/unregistered, but assigned to
      connections manually from the Q.931 helper. This means on unload
      existing expectations and connections using the helper are not
      cleaned up, leading to the following oops on module unload:
      
      CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c
      Oops[#1]:
      Cpu 0
      $ 0   : 00000000 00000000 00000004 c00a67f0
      $ 4   : 802a5ad0 81657e00 00000000 00000000
      $ 8   : 00000008 801461c8 00000000 80570050
      $12   : 819b0280 819b04b0 00000006 00000000
      $16   : 802a5a60 80000000 80b46000 80321010
      $20   : 00000000 00000004 802a5ad0 00000001
      $24   : 00000000 802257a8
      $28   : 802a4000 802a59e8 00000004 801d4e7c
      Hi    : 0000000b
      Lo    : 00506320
      epc   : 802224dc ip_conntrack_help+0x38/0x74     Tainted: P
      ra    : 801d4e7c nf_iterate+0xbc/0x130
      Status: 1000f403    KERNEL EXL IE
      Cause : 00800008
      BadVA : c00a6828
      PrId  : 00019374
      Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc
      Process swapper (pid: 0, threadinfo=802a4000, task=802a6000)
      Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004
              00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010
              801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002
              80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000
              81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001
              ...
      Call Trace:
       [<801e7d98>] ip_finish_output+0x0/0x23c
       [<801d4e7c>] nf_iterate+0xbc/0x130
       [<801d4e7c>] nf_iterate+0xbc/0x130
       [<801e7d98>] ip_finish_output+0x0/0x23c
       [<801e7d98>] ip_finish_output+0x0/0x23c
       [<801d4f8c>] nf_hook_slow+0x9c/0x1a4
      
      One way to fix this would be to split helper cleanup from the unregistration
      function and invoke it for the H.245 helper, but since ctnetlink needs to be
      able to find the helper for synchonization purposes, a better fix is to
      register it normally and make sure its not assigned to connections during
      helper lookup. The missing l3num initialization is enough for this, this
      patch changes it to use AF_UNSPEC to make it more explicit though.
      Reported-by: Nliannan <liannan@twsz.com>
      Signed-off-by: NPatrick McHardy <kaber@trash.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a56b8f81