Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 13 7月, 2007 1 次提交
  3. 10 7月, 2007 2 次提交
    • I
      sched: x86, track TSC-unstable events · bb29ab26
      由 Ingo Molnar 提交于 
      track TSC-unstable events and propagate it to the scheduler code.
Also allow sched_clock() to be used when the TSC is unstable,
the rq_clock() wrapper creates a reliable clock out of it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      bb29ab26
    • I
      sched: zap the migration init / cache-hot balancing code · 0437e109
      由 Ingo Molnar 提交于 
      the SMP load-balancer uses the boot-time migration-cost estimation
code to attempt to improve the quality of balancing. The reason for
this code is that the discrete priority queues do not preserve
the order of scheduling accurately, so the load-balancer skips
tasks that were running on a CPU 'recently'.

this code is fundamental fragile: the boot-time migration cost detector
doesnt really work on systems that had large L3 caches, it caused boot
delays on large systems and the whole cache-hot concept made the
balancing code pretty undeterministic as well.

(and hey, i wrote most of it, so i can say it out loud that it sucks ;-)

under CFS the same purpose of cache affinity can be achieved without
any special cache-hot special-case: tasks are sorted in the 'timeline'
tree and the SMP balancer picks tasks from the left side of the
tree, thus the most cache-cold task is balanced automatically.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0437e109
  5. 08 7月, 2007 1 次提交
  7. 07 7月, 2007 3 次提交
    • A
      GEODE: reboot fixup for geode machines with CS5536 boards · 95069f89
      由 Andres Salomon 提交于 
      Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines,
this has the reboot fixup do just that if such a board is detected.
Acked-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      95069f89
    • L
      MTRR: Fix race causing set_mtrr to go into infinite loop · d25c1ba2
      由 Loic Prylli 提交于 
      Processors synchronization in set_mtrr requires the .gate field to be set
after .count field is properly initialized.  Without an explicit barrier,
the compiler was reordering those memory stores.  That was sometimes
causing a processor (in ipi_handler) to see the .gate change and decrement
.count before the latter is set by set_mtrr() (which then hangs in a
infinite loop with irqs disabled).
Signed-off-by: NLoic Prylli <loic@myri.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d25c1ba2
    • J
      i386: fix regression, endless loop in ptrace singlestep over an int80 · 1e2e99f0
      由 Jason Wessel 提交于 
      The commit 635cf99a introduced a
regression.  Executing a ptrace single step after certain int80
accesses will infinitely loop and never advance the PC.

The TIF_SINGLESTEP check should be done on the return from the syscall
and not before it.

I loops on each single step on the pop right after the int80 which writes out
to the console.  At that point you can issue as many single steps as you want
and it will not advance any further.

The test case is below:

/* Test whether singlestep through an int80 syscall works.
 */
#define _GNU_SOURCE
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <sys/mman.h>
#include <asm/user.h>
#include <string.h>

static int child, status;
static struct user_regs_struct regs;

static void do_child()
{
	char str[80] = "child: int80 test\n";

	ptrace(PTRACE_TRACEME, 0, 0, 0);
	kill(getpid(), SIGUSR1);
	write(fileno(stdout),str,strlen(str));
	asm ("int $0x80" : : "a" (20)); /* getpid */
}

static void do_parent()
{
	unsigned long eip, expected = 0;
again:
	waitpid(child, &status, 0);
	if (WIFEXITED(status) || WIFSIGNALED(status))
		return;

	if (WIFSTOPPED(status)) {
		ptrace(PTRACE_GETREGS, child, 0, &regs);
		eip = regs.eip;
		if (expected)
			fprintf(stderr, "child stop @ %08lx, expected %08lx %s\n",
					eip, expected,
					eip == expected ? "" : " <== ERROR");

		if (*(unsigned short *)eip == 0x80cd) {
			fprintf(stderr, "int 0x80 at %08x\n", (unsigned int)eip);
			expected = eip + 2;
		} else
			expected = 0;

		ptrace(PTRACE_SINGLESTEP, child, NULL, NULL);
	}
	goto again;
}

int main(int argc, char * const argv[])
{
	child = fork();
	if (child)
		do_parent();
	else
		do_child();
	return 0;
}
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: <stable@kernel.org>
Cc: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1e2e99f0
  9. 04 7月, 2007 3 次提交
  11. 02 7月, 2007 2 次提交
    • A
      i386: mtrr crash fix · 84288ad8
      由 Andrew Morton 提交于 
      Commit 3ebad590 ("[PATCH] x86: Save and
restore the fixed-range MTRRs of the BSP when suspending") added mtrr
operations without verifying that the CPU has MTRRs.  Crashes transmeta
CPUs.

Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux@horizon.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      84288ad8
    • L
      i386: remove bogus mtrr range check · 4710bcce
      由 Linus Torvalds 提交于 
      Commit 9215da33 "fixed" the MTRR range
check to not allow any MTRR's under the 1MB mark (since that's where the
fixed MTRR's are active).

However, that was totally bogus, since it's normal (and almost required)
to have a large variable MTRR that starts at 0, and covers some large
percentage of the whole RAM, and then using the fixed MTRR's to override
that large MTRR to handle the special ISA hole in the 640k-1M region.

The old check was bogus too (checking that no variable MTRR is used that
is entirely under the 1MB range), but at least it wasn't actively
detrimental, because no sane situation would ever trigger such MTRR
usage in the first place.

That said, the whole notion of not allowing variable MTRR's in the low
1MB is just stupid, so rather than revert the commit, this just removes
the whole sad and unnecessary check entirely.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Tested-by: NLuca Palermo <darkmage@sabayonlinux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      4710bcce
  13. 29 6月, 2007 1 次提交
    • R
      mtrr/cyrix: fix sections · 80581c43
      由 Randy Dunlap 提交于 
      main.c::mtrr_add() or mtrr_del() [exported]
calls main.c::mtrr_add_page() or mtrr_del_page() or mtrr_restore() [resume]
calls main.c::set_mtrr()
calls main.c::ipi_handler()
calls main.c::mtrr_if->set_all() == which can be cyrix_set_all

WARNING: arch/i386/kernel/built-in.o(.text+0x8657): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x866b): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x867e): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x8684): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
WARNING: arch/i386/kernel/built-in.o(.text+0x868a): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region')
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      80581c43
  15. 24 6月, 2007 1 次提交
  17. 21 6月, 2007 2 次提交
  19. 17 6月, 2007 3 次提交
  21. 05 6月, 2007 1 次提交
  23. 01 6月, 2007 3 次提交
  25. 31 5月, 2007 1 次提交
  27. 22 5月, 2007 4 次提交
    • B
      i386: fix PGE mask · 17304383
      由 Brian Gerst 提交于 
      cr4 is a 32-bit register, so casting the mask to an unsigned char is wrong,
as it clears more than the PGE bit.
Signed-off-by: NBrian Gerst <bgerst@didntduck.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      17304383
    • A
      i386: Enable CX8/PGE CPUID bits early on VIA C3 · 39427d6e
      由 Andi Kleen 提交于 
      Fix boot failures with the early CPUID checking on VIA C3

Includes fixes from Christian Volkmann
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      39427d6e
    • A
      i386: Clear MCE flag on AMD K6 · c12ceb76
      由 Andi Kleen 提交于 
      It reports machine check capability in CPUID, but doesn't actually
implement all the necessary MSRs of the standard Intel machine
check architecture.

This fixes a boot failure on K6s recently introduced.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c12ceb76
    • A
      Detach sched.h from mm.h · e8edc6e0
      由 Alexey Dobriyan 提交于 
      First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e8edc6e0
  29. 19 5月, 2007 2 次提交
  31. 17 5月, 2007 2 次提交
  33. 15 5月, 2007 3 次提交
  35. 14 5月, 2007 1 次提交
    • D
      [CPUFREQ] powernow-k7: fix MHz rounding issue with perflib · dc2585eb
      由 Daniel Drake 提交于 
      When the PST tables are broken, powernow-k7 uses ACPI's processor_perflib to
deduce the available frequency multipliers from the _PSS tables.

Upon frequency change, processor_perflib performs some verification on the
frequency (checks that it's within allowable bounds).

powernow-k7 deals with absolute frequencies in KHz, whereas perflib only
deals with MHz values. When performing the above verification, perflib
multiplies the MHz values by 1000 to obtain the KHz value.

We then end up with situations like the following:
 - powernow-k7 multiplies the multiplier by the FSB, and obtains a value
   such as 1266768 KHz
 - perflib belives the same state has frequency of 1266 MHz
 - acpi_processor_ppc_notifier calls cpufreq_verify_within_limits to verify
   that 1266768 is in the allowable range of 0 to 1266000 (i.e. 1266 * 1000)
 - it's not, so that frequency is rejected
 - the maximum CPU frequency is not reachable

This patch solves the problem by rounding up the MHz values stored in perflib's
tables. Additionally it corrects a broken URL.

It also fixes http://bugzilla.kernel.org/show_bug.cgi?id=8255 although this
case is a bit different: the frequencies in the _PSS tables are wildly wrong,
but we get better results if we force ACPI to respect the fsb * multiplier
calculations (even though it seems that the multiplier values aren't entirely
correct either).
Signed-off-by: NDaniel Drake <dsd@gentoo.org>
Signed-off-by: NDave Jones <davej@redhat.com>
      dc2585eb
  37. 13 5月, 2007 2 次提交
  39. 12 5月, 2007 1 次提交
  41. 11 5月, 2007 1 次提交