Select DW_DMAC_CORE like the rest of glue drivers do, e.g.
drivers/dma/dw/Kconfig.

While here group selectors under SND_SOC_INTEL_HASWELL and
SND_SOC_INTEL_BAYTRAIL.

Make platforms, which are using a common SST firmware driver, to be
dependent on DMADEVICES.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Rename SND_SST_MFLD_PLATFORM to SND_SST_ATOM_HIFI2_PLATFORM to make it clear
that is not only about Medfield platform.

The new name is derived from Intel Atom and HiFi2. HiFi2 is the DSP version,
it's public information for Intel *Field/*Trail parts, see
https://www.alsa-project.org/main/index.php/Firmware. By combining HiFi2 with
Atom we get a unique non-ambiguous description of the core+DSP hardware for
Intel Medfield through Intel Cherrytrail.
Suggested-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SND_SOC_INTEL_SKYLAKE selects SND_SOC_INTEL_SST already. Thus no need to
duplicate. Remove duplications.
Acked-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Intel Haswell audio support fails to link if
CONFIG_SND_SOC_INTEL_SST_FIRMWARE is disabled:

sst-haswell-dsp.c: undefined reference to `sst_mem_block_register'
sst-haswell-dsp.c: undefined reference to `sst_mem_block_unregister_all'
sst-haswell-dsp.c: undefined reference to `sst_module_alloc_blocks'
sst-haswell-dsp.c: undefined reference to `sst_module_free'
sst-haswell-dsp.c: undefined reference to `sst_module_new'
sst-haswell-pcm.c: undefined reference to `sst_module_get_from_id'
sst-haswell-pcm.c: undefined reference to `sst_module_runtime_restore'
sst-haswell-pcm.c: undefined reference to `sst_module_runtime_save'
ERROR: "sst_block_alloc_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_block_free_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_dma_copyfrom" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_dma_copyto" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_dma_get_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_dma_put_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_free" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_get_offset" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_dsp_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_fw_free_all" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_fw_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_fw_reload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_fw_unload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_module_runtime_alloc_blocks" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_module_runtime_get_from_id" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!
ERROR: "sst_module_runtime_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined!

This moves the 'select' statement from two of the three haswell based users
into the line that is used by all of them, so make it harder to get wrong
and to fix the existing randconfig regressions.

Fixes: 2d995e5d ("ASoC: Intel: boards: Add bdw-rt5677 machine driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

This is used by the Chromebook Pixel 2015.
Signed-off-by: NBen Zhang <benzh@chromium.org>
Signed-off-by: NDylan Reid <dgreid@chromium.org>
[john@metanate.com:
 - forward-port driver from Chromium OS 3.14 tree to master
 - remove wake on voice function that isn't supported by upstream rt5677
   driver
 - remote owner assignment in platform_driver (Evan McClain)
 - convert to devm_snd_soc_register_card (Evan McClain)
 - add a full copyright header based on module license and Chromium OS
   Git history
]
Signed-off-by: NJohn Keeping <john@metanate.com>
Tested-by: NGenki Marshall <genki@genki.is>
Tested-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

fix issue reported by 0-Day with randconfig

The commit a68bc0d4
("ASoC: Intel: Atom: auto-detection of Baytrail-CR")
added a dependency on IOSF_MBI. The code used the IS_ENABLED macro
to check for this dependency but this is not enough in case the SST
driver is built-in. This could be fixed with IS_REACHABLE but
Baytrail-CR would not be detected depending on combinations of options

Add dependency in Kconfig to solve this for good
Reported-by: N0 day tester <fengguang.wu@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The recent commit [a92ea59b: ASoC: Intel: sst: only select
sst-firmware when DW DMAC is built-in] introduced more strict kconfig
dependency (depends on DW_DMAC_CORE=y) for avoiding the build failures
due to dependency messes in intel-sst.  This makes, however, it
impossible to use this driver with the modularized systems,
i.e. typically on Linux distros.

The problem addressed in the commit above is that sst_dsp_new() and
sst_dsp_free() includes the firmware init / finish that call dw_*()
functions.  Thus building it as built-in with DW_DMAC_CORE module
results in the missing symbols.

However, these sst_dsp functions are basically called only from the
drivers that depend on DW_DMAC_CORE already.  That is, once when these
functions are split out, the rest can be independent from dw stuff.

This patch attempts to solve the issue by the following:
- Split sst-dsp stuff into two modules: snd-soc-sst-dsp and
  snd-soc-sst-firmware.
- Move sst_dsp_new() and sst_dsp_free() to the latter module so that
  the former module can be independent from DW_DMAC_CORE.
- Add a new kconfig SND_SOC_INTEL_SST_FIRMWARE to select the latter
  module by machine drivers.

One only remaining pitfall is that each machine driver has to select
SND_SOC_INTEL_SST_FIRMWARE carefully depending on DW_DMAC_CORE.
This can't be done cleanly due to the restriction of the current
kbuild.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=988117
Fixes: a92ea59b ('ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in')
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Kconfig help texts were missing periods as suggested by Randy.

Also fix the alignment on a block of help text to be consistent
with rest.
Suggested-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Randy reported following error when ACPI is not enabled:

warning: (SND_SOC_INTEL_BYTCR_RT5640_MACH && SND_SOC_INTEL_BYTCR_RT5651_MACH
&& SND_SOC_INTEL_CHT_BSW_RT5672_MACH && SND_SOC_INTEL_CHT_BSW_RT5645_MACH &&
SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) selects SND_SST_IPC_ACPI
+which has unmet direct dependencies (SOUND && !M68K && !UML && SND &&
SND_SOC && ACPI)

causing these build errors:

In file included from ../sound/soc/intel/atom/sst/sst_acpi.c:40:0:
../include/acpi/acpi_bus.h:65:20: error: conflicting types for
'acpi_evaluate_dsm'
 union acpi_object *acpi_evaluate_dsm(acpi_handle handle, const u8 *uuid,
In file included from ../sound/soc/intel/atom/sst/sst_acpi.c:31:0:
../include/linux/acpi.h:676:34: note: previous definition of
'acpi_evaluate_dsm' was here
 static inline union acpi_object *acpi_evaluate_dsm(acpi_handle handle,

CONFIG_SND_SST_IPC_ACPI was already dependent upon ACPI, but that was not
solving it. So move the depends up to machine drivers and remove from
CONFIG_SND_SST_IPC_ACPI.
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds Broxton-P I2S machine driver which uses
DA7219 and MAX98357A codecs.
Signed-off-by: NSathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds the Broxton-P machine driver for Intel Broxton-P
reference boards. This machine uses the RT298 codec
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Broxton DSP is mostly similar to Skylake one but with subtle
differences like no Code Load DMA and uses HDA DMA for code
loading, DSP D0 and D3 sequences are different.

These changes are comprehended by adding different DSP power up
and down handlers, and new loader ops and also adding prepare and
trigger which HDA DSP DMA requires
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NGuruprasadX Pawse <guruprasadx.pawse@intel.com>
Signed-off-by: NKranthi G <gudishax.kranthikumar@intel.com>
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Skylake driver selects SND_HDA_I915 which causes kbuild to spew warning:

  warning: (SND_SOC_INTEL_SKYLAKE) selects SND_HDA_I915 which has unmet direct dependencies
  (SOUND && !M68K && !UML && SND && DRM_I915 && SND_HDA_CORE)

The SND_HDA_I915 should not be selected so drop that.
Reported-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds 2 HDMI FE and BE dai links and also
initializes the jack for each device.
Signed-off-by: NSathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds 2 HDMI FE and BE dai links and also
initializes the jack for each device.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Skylake platform has 3 pin widgets in HDMI codec. This patch adds
3 FE and BE dai links to support these in rt286 machine

Also add jack initialization for each of the device.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The SKL also supports HDMI output so in probe we need to enable
the HDMI using common i915 APIs to ensure it gets probed on the
bus

After S3 during the controller resequencing the codec domain need
to be kept ON for successful reconfiguration of Codec. Once
configured it will be turned OFF in codec driver.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

DPCM driver is recommended for BYT, CHT based platforms, so if
CONFIG_SND_SST_IPC_ACPI is selected then don't compile the BYT
Device IDs in common ACPI driver to avoid probe conflicts.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The ACPI match module is common to all three drivers, HSW, SKL
and Atom-DPCM driver. But Atom-DPCM driver does not use common
sst code so we cannot include the common SST module in Atom-DPCM
driver.

So the solution is to have a independent sst-match-acpi module
which helps in matching for all the three drivers. Now all driver
can be inbuilt in a single image

This patch really fixes the regression introduced by the
commit 95f09801 ("ASoC: Intel: Move apci find machine routines")
Acked-by: NJie Yang <yang.jie@intel.com>
Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

based on bytcr-rt5640 with changes only on codec side
Quirk logic is kept as placeholder.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

All the functionality was merged in DPCM-based driver,
keep older driver to avoid breaking userspace but
tag it as unsupported/deprecated
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This adds Skylake I2S machine driver which uses NAU88L25 as anlog codec and
MAX98357A as speakers
Signed-off-by: NRohit Ainapure <rohit.m.ainapure@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The previous commit ef3e199a ("ASoC: Intel: sst: only use
sst-firmware when DW DMAC is available") does not fix the 0day
building errors thoroughly:

   sound/built-in.o: In function 'dw_dma_remove'
   sound/built-in.o: In function 'dw_dma_probe'

Here we fallback to select sst-firmware only when DW DMAC
is built-in selected. We may need to refactor sst common
driver and split DW related codes to platform driver, but
ATM, this fallback may be the smallest fix.

Please be noticed that after applying this patch, we may
need select DW DMAC manually in DMA driver menu, before
we can prompt and select HSW/BDW and old BYT machines.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add i2s machine driver with NAU88L25 and SSM4567 codecs
Signed-off-by: NHarsha Priya <harshapriya.n@intel.com>
Signed-off-by: NConrad Cooke <conrad.cooke@intel.com>
Signed-off-by: NNaveen M <naveen.m@intel.com>
Signed-off-by: NSathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NSathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The i2c is dependency for the i2c codec drivers, so machine should depend on
i2c. WIthout this we get build failures if I2C is not selected

   sound/soc/codecs/rl6347a.c: In function 'rl6347a_hw_write':
>> sound/soc/codecs/rl6347a.c:66:8: error: implicit declaration of function
>> 'i2c_master_send' [-Werror=implicit-function-declaration]
     ret = i2c_master_send(client, data, 4);
           ^
   sound/soc/codecs/rl6347a.c: In function 'rl6347a_hw_read':
>> sound/soc/codecs/rl6347a.c:114:8: error: implicit declaration of function
>> 'i2c_transfer' [-Werror=implicit-function-declaration]
     ret = i2c_transfer(client->adapter, xfer, 2);
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The i2c is dependency for the i2c codec drivers, so machine should depend on
i2c. WIthout this we get build failures if I2C is not selected

   sound/soc/codecs/rl6347a.c: In function 'rl6347a_hw_write':
>> sound/soc/codecs/rl6347a.c:66:8: error: implicit declaration of function
>> 'i2c_master_send' [-Werror=implicit-function-declaration]
     ret = i2c_master_send(client, data, 4);
           ^
   sound/soc/codecs/rl6347a.c: In function 'rl6347a_hw_read':
>> sound/soc/codecs/rl6347a.c:114:8: error: implicit declaration of function
>> 'i2c_transfer' [-Werror=implicit-function-declaration]
     ret = i2c_transfer(client->adapter, xfer, 2);
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch moves the atom driver to use the common acpi match
functions.  Since atom driver has few more information in machine
table, these are appended to table and set to NULL for common
driver
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We don't always need soc-compress in soc, here add a config item
SND_SOC_COMPRESS, when nobody select it, the soc-compress will
not be compiled.

Here also change Kconfig to 'select SND_SOC_COMPRESS' for drivers
that needed soc-compress.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add the SKL I2S machine driver using Realtek ALC286S codec
in I2S mode.
Signed-off-by: NOmair M Abdullah <omair.m.abdullah@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The SKL driver does not code DSP topology in driver. It uses the
newly added ASoC topology core to parse the topology information
(controls, widgets and map) from topology binary.
Each topology element passed private data which contains
information that driver used to identify the module instance
within firmware and send IPCs for that module to DSP firmware
along with parameters.
This patch adds init routine to invoke topology load and callback
for topology creation.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This adds base SKL IPC library which uses common SST IPC lib.
Here we add definition for IPC types, sending and receiving IPC messages
from aDSP, handling interrupt, sending different types of messages etc
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This adds makefile and Kconfig to enable Skylake HD audio PCM driver
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The SND_SOC_INTEL_SST is for common IPC lib and this should ideally be
not selectable symbol but selected by respective machine driver So
remove the prompt and get respective machines select it
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some HSW and BYT machines depend on the DW_DMAC_CORE so they should
have have depends on this symbol rather than common IPC lib as SKL
onwards IPC lib is used but we don't depend on DW_DMAC_CORE
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NLiam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Fixed below error/warnings

   sound/built-in.o: In function `rt5645_i2c_probe':
>> rt5645.c:(.text+0xe38f5): undefined reference to
>> `devm_regmap_init_i2c'
   sound/built-in.o: In function `rt5645_i2c_driver_exit':
>> rt5645.c:(.exit.text+0x60e): undefined reference to `i2c_del_driver'
   sound/built-in.o: In function `rt5645_i2c_driver_init':
>> rt5645.c:(.init.text+0x1a90): undefined reference to
>> `i2c_register_driver'
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We don't need compress offload feature for broadwell broadwell machine,
here remove the non exist dependency.
Signed-off-by: NJie Yang <yang.jie@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

rt5650 and rt5645 are similar codec so reuse the cht_bsw_rt5645 driver
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add machine driver for two Intel Cherryview-based platforms, Cherrytrail
and Braswell. This machine driver will support max98090 codec as primary
codec. it can also support TI jack detect chip as aux device if platform
supports it.
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add machine driver for two Intel Cherryview-based platforms, Cherrytrail
and Braswell, with RT5645 codec
Signed-off-by: NFang, Yang A <yang.a.fang@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Acked-by: NKevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The line continuation in Kconfig should be a '\' instead of '\\'.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>