This patch provides tap device create/destroy APIs in tap.c.
Signed-off-by: NSainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Renaming tap related APIs, data structures and macros in tap.c from macvtap_.* to tap_.*
Signed-off-by: NSainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

macvtap module has code for tap/queue management and link management. This patch splits
the code into macvtap_main.c for link management and tap.c for tap/queue management.
Functionality in tap.c can be re-used for implementing tap on other virtual interfaces.
Signed-off-by: NSainath Grandhi <sainath.grandhi@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) If the timing is wrong we can indefinitely stop generating new ipv6
    temporary addresses, from Marcus Huewe.

 2) Don't double free per-cpu stats in ipv6 SIT tunnel driver, from Cong
    Wang.

 3) Put protections in place so that AF_PACKET is not able to submit
    packets which don't even have a link level header to drivers. From
    Willem de Bruijn.

 4) Fix memory leaks in ipv4 and ipv6 multicast code, from Hangbin Liu.

 5) Don't use udp_ioctl() in l2tp code, UDP version expects a UDP socket
    and that doesn't go over very well when it is passed an L2TP one.
    Fix from Eric Dumazet.

 6) Don't crash on NULL pointer in phy_attach_direct(), from Florian
    Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  l2tp: do not use udp_ioctl()
  xen-netfront: Delete rx_refill_timer in xennet_disconnect_backend()
  NET: mkiss: Fix panic
  net: hns: Fix the device being used for dma mapping during TX
  net: phy: Initialize mdio clock at probe function
  igmp, mld: Fix memory leak in igmpv3/mld_del_delrec()
  xen-netfront: Improve error handling during initialization
  sierra_net: Skip validating irrelevant fields for IDLE LSIs
  sierra_net: Add support for IPv6 and Dual-Stack Link Sense Indications
  kcm: fix 0-length case for kcm_sendmsg()
  xen-netfront: Rework the fix for Rx stall during OOM and network stress
  net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()
  net: thunderx: Fix PHY autoneg for SGMII QLM mode
  net: dsa: Do not destroy invalid network devices
  ping: fix a null pointer dereference
  packet: round up linear to header len
  net: introduce device min_header_len
  sit: fix a double free on error path
  lwtunnel: valid encap attr check should return 0 when lwtunnel is disabled
  ipv6: addrconf: fix generation of new temporary addresses

Pull rdma fixes from Doug Ledford:
 "Third round of -rc fixes for 4.10 kernel:

   - two security related issues in the rxe driver

   - one compile issue in the RDMA uapi header"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA: Don't reference kernel private header from UAPI header
  IB/rxe: Fix mem_check_range integer overflow
  IB/rxe: Fix resid update

Pull i2c bugfixes from Wolfram Sang:
 "Two bugfixes (proper IO mapping and use of mutex) for a driver feature
  we introduced in this cycle"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: Request the SMBUS semaphore inside the mutex
  i2c: piix4: Fix request_region size

Pull MMC host fix from Ulf Hansson:
 "mmci: Fix hang while waiting for busy-end interrupt"

* tag 'mmc-v4.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmci: avoid clearing ST Micro busy end interrupt mistakenly

Pull sound fixes from Takashi Iwai:
 "Here are some last-minute fixes: two fixes for races in ALSA sequencer
  queue spotted by syzkaller, a revert for a regression of LINE6 driver
  (since 4.9), and a trivial new codec ID addition for Nvidia HDMI"

* tag 'sound-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - adding a new NV HDMI/DP codec ID in the driver
  ALSA: seq: Fix race at creating a queue
  Revert "ALSA: line6: Only determine control port properties if needed"
  ALSA: seq: Don't handle loop timeout at snd_seq_pool_done()

Pull nfsd revert from Bruce Fields:
 "This patch turned out to have a couple problems. The problems are
  fixable, but at least one of the fixes is a little ugly. The original
  bug has always been there, so we can wait another week or two to get
  this right"

* tag 'nfsd-4.10-3' of git://linux-nfs.org/~bfields/linux:
  nfsd: Revert "nfsd: special case truncates some more"

Pull powerpc fixes friom Michael Ellerman:
 "Apologies for the late pull request, but Ben has been busy finding bugs.

   - Userspace was semi-randomly segfaulting on radix due to us
     incorrectly handling a fault triggered by autonuma, caused by a
     patch we merged earlier in v4.10 to prevent the kernel executing
     userspace.

   - We weren't marking host IPIs properly for KVM in the OPAL ICP
     backend.

   - The ERAT flushing on radix was missing an isync and was incorrectly
     marked as DD1 only.

   - The powernv CPU hotplug code was missing a wakeup type and failing
     to flush the interrupt correctly when using OPAL ICP

  Thanks to Benjamin Herrenschmidt"

* tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Properly set "host-ipi" on IPIs
  powerpc/powernv: Fix CPU hotplug to handle waking on HVI
  powerpc/mm/radix: Update ERAT flushes when invalidating TLB
  powerpc/mm: Fix spurrious segfaults on radix with autonuma

Add maintainers for this tunnel driver. Include main osmocom.org mailist
list too.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

udp_ioctl(), as its name suggests, is used by UDP protocols,
but is also used by L2TP :(

L2TP should use its own handler, because it really does not
look the same.

SIOCINQ for instance should not assume UDP checksum or headers.

Thanks to Andrey and syzkaller team for providing the report
and a nice reproducer.

While crashes only happen on recent kernels (after commit
7c13f97f ("udp: do fwd memory scheduling on dequeue")), this
probably needs to be backported to older kernels.

Fixes: 7c13f97f ("udp: do fwd memory scheduling on dequeue")
Fixes: 85584672 ("udp: Fix udp_poll() and ioctl()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mickaël Salaün says:

====================
Improve BPF selftests and use the library (net-next tree)

This series brings some fixes to selftests, add the ability to test
unprivileged BPF programs as root and replace bpf_sys.h with calls to the BPF
library.

This is intended for the net-next tree and apply on c0e4dadb ("net: dsa:
mv88e6xxx: Move forward declaration to where it is needed").

Changes since v4:
* align text for function calls as requested by Daniel Borkmann
  (bpf_load_program and bpf_map_update_elem)
* rebase

Changes since v3:
* keep the bzero() calls

Changes since v2:
* use the patches from two previous series (unprivileged tests and bpf_sys.h
  replacement)
* include one more stdint.h
* rebase on net-next
* add this cover letter

Changes since v1:
* exclude patches not intended for the net-next tree
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add require dependency headers.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace bpf_map_create() with bpf_create_map() calls.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace bpf_map_next_key() with bpf_map_get_next_key() calls.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace bpf_map_delete() with bpf_map_delete_elem() calls.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace bpf_map_lookup() with bpf_map_lookup_elem() calls.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace bpf_map_update() with bpf_map_update_elem() calls.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace bpf_prog_load() with bpf_load_program() calls.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If selftests are run as root, then execute the unprivileged checks as
well. This switch from 243 to 368 tests.

The test numbers are suffixed with "/u" when executed as unprivileged or
with "/p" when executed as privileged.

The geteuid() check is replaced with a capability check.

Handling capabilities requires the libcap dependency.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the tools include directory instead of the installed one to allow
builds from other kernels.
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tools version of this header is out of date; update it to the latest
version from kernel header.

Synchronize with the following commits:
* b95a5c4d ("bpf: add a longest prefix match trie map implementation")
* a5e8c070 ("bpf: add bpf_probe_read_str helper")
* d1b662ad ("bpf: allow option for setting bpf_l4_csum_replace from scratch")
Signed-off-by: NMickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Mack <daniel@zonque.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
Netronome NFP4000 and NFP6000 PF driver

This is a base PF driver for Netronome NFP4000 and NFP6000 chips.  This
series doesn't add any exciting new features, it provides a foundation
for supporting more advanced firmware applications.

Patch 1 moves a bitfield-related helper from our BPF code to the global
header.

Patch 2 renames the kernel module and adds a new main file.  We were
considering 3-module approach (pf, vf, common netdev library) but
ultimately settled on a single module to keep things simple.

Patch 3 adds support for accessing chip internals.  It provides a way of
configuring access windows to different parts of chip memory and issuing
pretty much any commands on chip's NoC.

Patches 4, 5, 6, 7, 8 provide support for accessing and interpreting
various hardware and firmware information structures.

Patch 9 introduces service processor (NSP) ABI.  This ABI gives us
access to PHY/SFP module configuration and information as well as
methods for unloading and loading application firmware.

Patches 10 and 11 modify the existing netdev code to make it possible
to support multi-port devices (sharing a PCI device).

Patch 12 adds a new driver probe path which will be used for the PF
PCI device IDs.  It utilizes the newly added infrastructure and is able
to load application FW and spawn netdevs for all card's ports.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add PF driver for NFP4000 and NFP6000.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PF services multiple ports using single PCI device therefore
IRQs can no longer be allocated in the netdev code.  Lower
portion of the driver has to allocate the IRQs and hand them
out to ports.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PF driver will support multiple ports per PCI device, add port
number to DebugFS paths.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NFP Service Processor (NSP) is an ARM core inside the chip which
is responsible for management and control functions.  Add support
for chip reset, FW load and external module access using the NSP.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for using application FW symbol table to look up
location of information in device memory.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MIP is a vector of information which linker can optionally include
in application firmware.  It will be used to retrieve the location
of symbol tables.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

NFFW info is a resource which contains information about
the loaded application firmware.  Add code which will allow
us to decode it and retrieve MIP location.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hwinfo is a simple key=value store of information which is read
from the flash and populated during chip power on.  Add code to
look up information in it.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resource table is an array placed in a well defined location
in device's memory which describes device resources and contains
locks which have to be acquired to use them.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Command Push Pull is the name of NFP's network on a chip.
PCIe PF can access the interconnect through a number of mappings
controlled via Base Access Registers.  BARs allow the PF to issue
pretty much any command or address any memory on the chip.

Add appropriate logic and a handful of helper for simple operations
like reading scalars from memories.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support for the PF driver is about to be added and will share
much of the code.  When the VF driver was added we planned to
maintain the PF driver as a separate module but have decided
that for our simple use case just maintaining a single module
is more reasonable.  Rename the driver to just "nfp" and update
the Kconfig.

While at it remove latent references to NFP3200.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a helper for checking at runtime that a value will fit inside
a specified field/mask.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
devlink: small cleanup around eswitch [sg]et

Contains small devlink cleanup around eswitch get/set commands.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even when mode_get op is not present, other eswitch attrs need to be
filled-up.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>