We read the coherent current seqno and actual head from ring.
For hardware access we need to take runtime_pm reference.

Get hardware specific values with runtime reference held
and print them first to emphasize hw state vs bookkeepping.

v2: Reorder output according to hw access (Chris)
    remove superfluous locking (Daniel)

Testcase: igt/pm_rpm/debugfs-read
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88910
Tested-by: Ding Heng <hengx.ding@intel.com> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

As per the specififcation, the SB_DevFn is the PCI_DEVFN of the target
device and not the source. So PCI_DEVFN(2,0) is not correct. Further the
port ID should be enough to identify devices unless they are MFD. The
SB_DevFn was intended to remove ambiguity in case of these MFD devices.

For non MFD devices the recommendation for the target device IP was to
ignore these fields, but not all of them followed the recommendation.
Some like CCK ignore these fields and hence PCI_DEVFN(2, 0) works and so
does PCI_DEVFN(0, 0) as it works for DPIO. The issue came to light because
of GPIONC which was not getting programmed correctly with PCI_DEVFN(2, 0).
It turned out that this did not follow the recommendation and expected 0
in this field.

In general the recommendation is to use SB_DevFn as PCI_DEVFN(0, 0) for
all devices except target PCI devices.
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

It's possible for invalidate_range_start mmu notifier callback to race
against userptr object release. If the gem object was released prior to
obtaining the spinlock in invalidate_range_start we're hitting null
pointer dereference.

Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close
Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close-overlap
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
[Jani: added code comment suggested by Chris]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The get_config() functions for ddi and dp_mst, used to read the value
of cpu_transcoder from the crtc->config instead of the state passed as
an argument. On the hardware state readout path, that happens to work
since the proper value is written to it before encoder->get_config() is
called. However, in the check_crtc() path, the state will be read from
the cpu_transcoder in the software tracking, instead of the one just
read out from hw. Using the field in the supplied intel_crtc_state
should do the right thing in both cases.

v2: Fix intel_ddi_get_config() too. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove request from list before unreferencing it, in case it's actually
the only reference. (Found by Tvrtko Ursulin)

This issue has been most likely introduced in

commit 6d3d8274
Author: Nick Hoath <nicholas.hoath@intel.com>
Date:   Thu Jan 15 13:10:39 2015 +0000

    drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This simplifies __intel_set_mode() a little.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The checking for ack and also any subsequent mmio access
will serialize with setting the forcewake bit. Drop the
posting read as superfluous.

Note that in the put side we still want to keep the posting read
as it will ensure that the hw sees our forcewake release in a
timely manner and doesn't keep the hw powered up.

Comment from Chris:

On Wed, Jan 28, 2015 at 05:54:14PM +0200, Mika Kuoppala wrote:
> Ville Syrjälä <ville.syrjala@linux.intel.com> writes:
> > IIRC the posting read from same cache line actually fixed real bugs. So
> > I'm a bit worried about dropping them. But I suppose it's possible only
> > the _put side was important for those bugs.
>
> I found these:
>
> commit 6af2d180
> Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> Date:   Thu Jul 26 16:24:50 2012 +0200
>
>     drm/i915: fix forcewake related hangs on snb
>
> commit 8dee3eea
> Author: Ben Widawsky <ben@bwidawsk.net>
> Date:   Sat Sep 1 22:59:50 2012 -0700
>
>     drm/i915: Never read FORCEWAKE
>
> https://bugs.freedesktop.org/show_bug.cgi?id=51738
> https://bugs.freedesktop.org/show_bug.cgi?id=52424
>
> The snb here seems to survive gem_dummy_reloc_loop and
> gem_ring_sync_loop in here with the get side posting removed.

Note that we kept the once associated with #52424, but judging by my
comments in #51738 the posting read is just a band aid anyway as a full
mb() itself was not adequate.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: paste relevant review discussion in.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_uncore_early_sanitize() will reset the forcewake registers. When
forcewake domains were introduced, the domain init was done after the
sanitization of the forcewake registers. And as the resetting of
registers use the domain accessors, we tried to reset the forcewake
registers with unitialized forcewake domains and failed.

Fix this by sanitizing after all the domains have been initialized. Do
per domain clearing of forcewake register on domain init so that
IVB can do early access to ECOBUS do determine the final configuration.

This regression was introduced in

commit 05a2fb15
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Mon Jan 19 16:20:43 2015 +0200

    drm/i915: Consolidate forcewake code

v2: Carve out ellc detect, fw_domain_reset for ivb/ecobus (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88805
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: NOlof Johansson <olof@lixom.net>
Tested-by: Darren Hart <dvhart@linux.intel.com> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move the CHV check into vlv_set_rps_idle() to simplify the caller a bit.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now when we declare gpu errors only through our own dedicated
hangcheck workqueue there is no need to have a separate workqueue
for handling the resetting and waking up the clients as the deadlock
concerns are no more.

The only exception is i915_debugfs::i915_set_wedged, which triggers
error handling through process context. However as this is only used through
test harness it is responsibility for test harness not to introduce hangs
through both debug interface and through hangcheck mechanism at the same time.

Remove gpu_error.work and let the hangcheck work do the tasks it used to.

v2: Add a big warning sign into i915_debugfs::i915_set_wedged (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The removed functions can be resurrected in intel_dsi.c as need arises.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No functional changes.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All of these are replaced by the drm core mipi dsi functions.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use the drm core interfaces in preparation of removing our homebrew.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add basic support for using the drm mipi dsi framework for DSI. We don't
use device tree which is pretty much required by mipi_dsi_host_register
and friends, and we don't have the kind of device model the functions
expect either. So we cheat and use it as a library to abstract what we
need: a nice, clean interface for DSI transfers. This means we will have
to be careful with what functions we call, as the driver model devices
in mipi_dsi_host and mipi_dsi_device will *not* be initialized.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace intel_dsi_device and intel_dsi_dev_ops with drm_panel and
drm_panel_funcs. They are adequate for what we have now, and if we end
up needing more than this we should improve drm_panel. This will keep us
better aligned with the drm core infrastructure.

The panel driver initialization changes a bit. It still remains hideous,
but fixing that is beyond the scope here.

v2: extend mode config mutex to cover drm_panel_get_modes (Shobhit)
    vbt_panel->intel_dsi = intel_dsi in vbt panel init (Shobhit)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-By: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Mainly taking care of some register offsets, otherwise things are similar to
hsw. Also, programming ddi aux to use hardcoded values for psr data select.

v2: introduce  EDP_PSR_AUX_BASE macro (Chris)
v3: Moving to HW tracking for SKL+ platforms, so activating source psr during
psr_enabling and then avoiding psr entries and exits for each frontbuffer
updates.
v4: Using SKL DDI AUX regs instead of changing PSR_AUX regs definition (Rodrigo)
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Drop the hunks to short-circuit sw tracking: We'd need to
push this down one level, and I don't fully trust the test coverage
yet to do so. So much prefer we pick a whitelist approach for the
cases we know work correctly.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The core fix was applied in

commit a63b03e2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jan 6 10:29:35 2015 +0000

    mutex: Always clear owner field upon mutex_unlock()

(note the absence of stable@ tag)

so we can now revert our band-aid commit 226e5ae9 for -next.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have had %x and %u intermixed. Bring everything in line and
use %x
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For example,

/sys/kernel/debug/dri/0/i915_hangcheck_info:

Hangcheck active, fires in 15887800ms
render ring:
        seqno = -4059 [current -583]
        action = 2
        score = 0
        ACTHD = 1ee8 [current 21f980]
        max ACTHD = 0

v2: Include expiration ETA. Can anyone spot a problem?
v3: Convert for workqueued hangcheck (Mika)
v4: Print seqnos as unsigned ints (Ville)
v5: Print seqnos as hex (Chris)

Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) (v2)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When run as a timer, i915_hangcheck_elapsed() must adhere to all the
rules of running in a softirq context. This is advantageous to us as we
want to minimise the risk that a driver bug will prevent us from
detecting a hung GPU. However, that is irrelevant if the driver bug
prevents us from resetting and recovering. Still it is prudent not to
rely on mutexes inside the checker, but given the coarseness of
dev->struct_mutex doing so is extremely hard.

Give in and run from a work queue, i.e. outside of softirq.

v2: Use own workqueue to avoid deadlocks (Daniel)
    Cleanup commit msg and add comment to i915_queue_hangcheck() (Chris)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <dnaiel.vetter@ffwll.chm>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: Remove accidental kerneldoc comment starter, to appease the 0
day builder.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The comment for intel_cpu_fifo_underrun_irq_handler() is not consistent
with the code and the rest of the comment for this routine. This patch
fixes this typo in comment.
Signed-off-by: NKumar Amit Mehta <gmate.amit@gmail.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't have full atomic modeset support yet, but the "nuclear
pageflip" subset of functionality (i.e., plane operations only) should
be ready.  Allow the user to force atomic on for debug purposes, or for
fixed-purpose embedded devices that will only use atomic for plane
updates.

The term 'nuclear' is used here instead of 'atomic' to make it clear
that this doesn't allow full atomic modeset support, just a (very
useful) subset of the atomic functionality.

We'll drop the kernel parameter and unconditionally enable atomic in a
future patch once all of the necessary pieces are in.

v2:
 - Use module_param_named_unsafe() (Daniel)
 - Simplify comment on DRIVER_ATOMIC guard (Daniel)

v3:
 - Make the parameter "nuclear_pageflip" rather than just "nuclear"
   for clarity. (Ander)

v4:
 - Make the internal variable "nuclear_pageflip" as well as the
   command-line option. (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will exercise our atomic pipeline for legacy property updates.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The atomic helpers need these to prepare a new state object when
starting a new atomic operation.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Even though we only support atomic plane updates at the moment, we still
need to add an .atomic_get_property() entrypoint for connectors before
we allow the driver to flip on the DRIVER_ATOMIC bit.  As soon as that
bit gets set, the DRM core will start adding atomic connector properties
(in addition to the plane properties we care about at the moment), so we
need to be able to handle the new way the DRM core will interact with
us.

For simplicity, we just lookup driver-specific connector properties in
the usual shadow array maintained by the core.  Once we get real atomic
modeset support for crtc's and planes, this code should be re-written to
pull the data out of crtc/connector state structures.

v2: Fix intel_dvo and intel_dsi that I missed on the first pass (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We want to enable/test plane updates via the atomic interface, but as
soon as we flip DRIVER_ATOMIC on, the DRM core will take some atomic
codepaths to lookup properties during drmModeGetConnector() and some of
those codepaths unconditionally dereference connector->state
(specifically when looking up the CRTC ID property in
drm_atomic_connector_get_property()).  Create a dummy connector state
for each connector at init time to ensure the DRM core doesn't try to
dereference a NULL connector->state.  The actual connector properties
will never be updated or contain useful information, but since we're
doing this specifically for testing/debug of the plane operations (and
only when a specific kernel module option is given), that shouldn't
really matter.

Once we start creating connector states, the DRM core will want to be
able to clean them up for us.  We also need to hook up the destruction
entrypoint to the core's helper.

v2: Squash in the patch to set the state destruction hook (Ander & Bob)

v3: Only create dummy connector states when we're actually faking
    atomic support.  (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add the top-level atomic entrypoints for check/commit.  These won't get
called yet; we still need to either enable the atomic ioctl or switch to
using the non-transitional atomic helpers for legacy operations.

v2:
 - Use plane->pipe rather than plane->possible_crtcs while ensuring that
   only a single CRTC is in use.  Either way will work fine since i915
   drm_plane's are always tied to a single CRTC, but plane->pipe is
   slightly more intuitive. (Ander)
 - Simplify crtc/connector checking logic. (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we flip on the DRIVER_ATOMIC bit, the DRM core will start calling
this entrypoint to set and lookup driver-specific plane property values,
rather than maintaining a shadow copy in object->properties.

Note that although we add these functions to the plane vtable, they will
not yet be called.  Future patches that switch our .set_property()
handler and/or enable full atomic functionality are required before
these code paths will be executed.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All of the previous refactoring/consolidation of plane code has resulted
in intel_primary_plane_funcs, intel_cursor_plane_funcs, and
intel_sprite_plane_funcs being identical.  Replace all of these with a
single 'intel_plane_funcs' vtable for simplicity.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Runtime state that can be manipulated via properties should now go in
intel_plane_state/drm_plane_state so that it can be tracked as part of
an atomic transaction.

We add a new 'intel_create_plane_state' function so that the proper
initial value for this property (and future properties) doesn't have to
be repeated at each plane initialization site.

v2:
 - Stick rotation in common drm_plane_state rather than
   intel_plane_state. (Daniel)
 - Add intel_create_plane_state() to consolidate the places where we
   have to set initial state values.  (Ander)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace all the vlv_gpu_freq(), vlv_freq_opcode(),
*GT_FREQUENCY_MULTIPLIER, and /GT_FREQUENCY_MULTIPLIER instances
with intel_gpu_freq() and intel_freq_opcode() calls.

Most of the change was performed with the following semantic patch:
@@
expression E;
@@
(
- E * GT_FREQUENCY_MULTIPLIER
+ intel_gpu_freq(dev_priv, E)
|
- E *= GT_FREQUENCY_MULTIPLIER
+ E = intel_gpu_freq(dev_priv, E)
|
- E /= GT_FREQUENCY_MULTIPLIER
+ E = intel_freq_opcode(dev_priv, E)
|
- do_div(E, GT_FREQUENCY_MULTIPLIER)
+ E = intel_freq_opcode(dev_priv, E)
)

@@
expression E1, E2;
@@
(
- vlv_gpu_freq(E1, E2)
+ intel_gpu_freq(E1, E2)
|
- vlv_freq_opcode(E1, E2)
+ intel_freq_opcode(E1, E2)
)

@@
expression E1, E2, E3, E4;
@@
(
- if (IS_VALLEYVIEW(E1)) {
-  E2 = intel_gpu_freq(E3, E4);
- } else {
-  E2 = intel_gpu_freq(E3, E4);
- }
+ E2 = intel_gpu_freq(E3, E4);
|
- if (IS_VALLEYVIEW(E1)) {
-  E2 = intel_freq_opcode(E3, E4);
- } else {
-  E2 = intel_freq_opcode(E3, E4);
- }
+ E2 = intel_freq_opcode(E3, E4);
)

One hunk was manually undone as intel_gpu_freq() ended up
calling itself. Supposedly it would be possible to exclude
certain functions via !=~, but I couldn't get that to work.

Also the removal of vlv_gpu_freq() and vlv_opcode_freq() compat
wrappers was done manually.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rename the vlv_gpu_freq() and vlv_freq_opecode() functions to have
an intel_ prefix, and handle non-VLV/CHV platforms in them as well.
Leave the vlv_ names around for now since they're currently used.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently the 'gt_cur_freq_mhz' file shows the actual GPU frequency on
VLV/CHV, and the last requested frequency on other platforms. Change the
meaning of the file on VLV/CHV to follow the the other platforms, and
introduce a new file 'gt_act_freq_mhz' which shows the actual frequency
on all platforms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we don't call valleyview_set_rps() when changing the min/max
limits through sysfs if the current frequency is still within the new
limits. However that means we sometimes forget to update PMINTRMSK.
Eg. if the current frequency is at the old minimum, and then we reduce
the minum further we should then enable the 'down' interrupts in PMINTRMSK
but currently we don't.

Fix it up by always calling valleyview_set_rps() (just like we do for
!vlv/chv platforms). This also allows the code to be simplified a bit.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Calls have been added to invalidate/flush DRRS whenever invalidate/flush is
called as part of frontbuffer tracking.
Apart from calls as a result of GEM tracking to fb invalidate/flush, a
call has been added to invalidate fb obj from crtc_page_flip as well. This
is to track busyness through flip calls.
The call to fb_obj_invalidate (in flip) is placed before queuing flip for this
obj.

drrs_invalidate() and drrs_flush() check for drrs.dp which would be NULL if
it was setup in drrs_enable(). This covers for the condition when DRRS is
not supported.

v2: Removing the call to invalidate_drrs from page_flip.
This has not been tested on Android yet, but, in case DRRS transtions do not
work as expected, check by adding back this call in page_flip.
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Calling enable/disable DRRS when enable/disable DDI are called.
These functions are responsible for setup of drrs data (in enable) and
reset of drrs (in disable).
has_drrs is true when downclock_mode is found and SEAMLESS_DRRS is set in
the VBT. A check has been added for has_drrs in these functions, to make
sure the functions go through only if DRRS will work on the platform with
the attached panel.

V2: [By Ram]: WARN_ON is used when intel_edp_drrs_enable() is called more than
once [Rodrigo]
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NRamalingam C <ramalingam.c@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add DRRS work function to trigger a switch to low refresh rate,
when no activity is detected on screen till 1 sec duration.

v2: [By Ram]: drrs.dp also protected with drrs.mutex and worker function
is renamed to intel_edp_drrs_downclock_work [Chris]
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NRamalingam C <ramalingam.c@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Self-explanatory code is better code.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>