- 23 9月, 2006 12 次提交
-
-
由 Bryan O'Sullivan 提交于
Ordering of writethrough store buffers needs to be forced, and we need to use ifdef to get writethrough behavior to InfiniPath buffers, because there is no generic way to specify that at this time (similar to code in char/drm/drm_vm.c and block/z2ram.c). Signed-off-by: NJohn Gregor <john.gregor@qlogic.com> Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
Improve performance of userspace post receive, post SRQ receive, and poll CQ operations for ipath by allowing userspace to directly mmap() receive queues and completion queues. This eliminates the copying between userspace and the kernel in the data path. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
Pass a struct ib_udata to the low-level driver's ->modify_srq() and ->modify_qp() methods, so that it can get to the device-specific data passed in by the userspace driver. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level drivers can return data from a resize CQ operation to userspace. Have ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump the userspace ABI. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Heiko J Schick 提交于
Add a driver for IBM GX bus InfiniBand adapters, which are usable with some pSeries/System p systems. Signed-off-by: Heiko J Schick <schickhj.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ishai Rabinovitz 提交于
Add local_ib_device and local_ib_port attributes to srp scsi_host. These are needed when we want to connect to the same target through multiple distinct ports. Signed-off-by: NIshai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 James Lentini 提交于
Signed-off-by: NJames Lentini <jlentini@netapp.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Lockdep warns when userspace creates a QP that uses different CQs for send completions and receive completions, because both CQs are locked and their mutexes belong to the same lock class. However, we know that the mutexes are distinct and the nesting is safe (there is no possibility of AB-BA deadlock because the mutexes are locked with down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to get rid of the lockdep warning. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
There were two functions that open-coded idr_read_cq() in terms of idr_read_uobj() rather than using the helper. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
Prevent flush task from freeing the ipoib_neigh pointer, while ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it has loaded from the skb's hardware address. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
Make kernel use UAR2 instead of UAR1 for hardware access: this adds sanity checking from the hardware side, without any performance cost. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
The SM LID used to send traps to is incorrectly set to port LID. This is a regression from 2.6.17 -- after a PortInfo MAD is received, no traps are sent to the SM LID. The traps go to the loopback interface instead, and are dropped there. The SM LID should be taken from the sm_lid of the PortInfo response. The bug was introduced by commit 12bbb2b7: IB/mthca: Add client reregister event generation Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 22 9月, 2006 15 次提交
-
-
由 David Woodhouse 提交于
This reverts commit 668040fc. The 'flags' field of the struct request is 'unsigned long'. Quite how Randy came to see 'long int format, different type arg' I don't know, but it doesn't seem to be the case any more. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Claudio Lanconelli 提交于
Signed-off-by: NClaudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Jiri Slaby 提交于
Use pci_resource_start for getting start of regions and pci_iomap to not doing this directly by using dev->resource... (Thanks to Rolf Eike Beer) Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Jiri Slaby 提交于
Use kzalloc instad of kmalloc+memset(0). Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Jiri Slaby 提交于
Spaces were used for indent, there was more than 80 columns per line. Get rid of that stuff. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Lennert Buytenhek 提交于
The iq80310 mtd map driver depends on ARCH_IQ80310, which isn't defined anywhere in the tree (as we don't have 80310 support), and furthermore, everything the driver does can be done with physmap instead. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Frank Haverkamp 提交于
Due to this typo, a wrong ECC layout table is chosen. Signed-off-by: NFrank Haverkamp <haver@vnet.ibm.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Lennert Buytenhek 提交于
Implement PM handling for physmap. Idea from Steven Scholz, patch by David Anders. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Amol Lad 提交于
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Tested (compilation only) with: - allmodconfig - Modifying drivers/mtd/maps/Kconfig and drivers/mtd/nand/Kconfig to make sure that the changed file is compiling without warning Signed-off-by: NAmol Lad <amol@verismonetworks.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Randy Dunlap 提交于
Fix printk format warning(s): drivers/mtd/mtd_blkdevs.c:72: warning: long int format, different type arg (arg 2) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Brian Walsh 提交于
If the amount of flash is not divisible by 2 then the mask in parse_mtd_partitions would fail to work as designed. Passing in the base address corrects this problem. Signed-off-by: NBrian Walsh <brian@walsh.ws> Cc: Deepak Sanexa <dsanexa@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Michal Piotrowski 提交于
Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Håvard Skinnemoen 提交于
Introduce the MTD_STUPID_LOCK flag which indicates that the flash chip is always locked after power-up, so all sectors need to be unlocked before it is usable. If this flag is set, and the chip provides an unlock() operation, mtd_add_device will unlock the whole MTD device if it's writeable. This means that non-writeable partitions will stay locked. Set MTD_STUPID_LOCK in fixup_use_atmel_lock() so that these chips will work as expected. Signed-off-by: NHåvard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Benjamin Herrenschmidt 提交于
Looks like a workaround for old bogus OF bitrot... This fixes it and hence fixes boot on some performa machines. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 21 9月, 2006 13 次提交
-
-
由 Rik Snel 提交于
Just some minor comment nits. - little-endian is better than low-endian - and since it is called essiv everywere it should also be essiv in the comments (and not ess_iv) Signed-off-by: NRik Snel <rsnel@cube.dyndns.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts padlock-sha to use crypto_hash for its fallback. It also changes the fallback selection to use selection by type instead of name. This is done through the new CRYPTO_ALG_NEED_FALLBACK bit, which is set if and only if an algorithm needs a fallback of the same type. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts all users to use the new crypto_comp type and the crypto_has_* functions. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts all remaining crypto_digest users to use the new crypto_hash interface. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts ISCSI to use the new crypto_hash interface instead of crypto_digest. It's a fairly straightforward substitution. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch removes obsolete block operations of the simple cipher type from drivers. These were preserved so that existing users can make a smooth transition. Now that the transition is complete, they are no longer needed. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts all remaining users to use the new block cipher type where applicable. It also changes all simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts dm-crypt to use the new block cipher type where applicable. It also changes simple cipher operations to use the new encrypt_one/decrypt_one interface. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch converts cryptoloop to use the new block cipher type where applicable. As a result the ECB-specific and CBC-specific transfer functions have been merged. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adds block cipher algorithms for cbc(aes) and ecb(aes) for the PadLock device. Once all users to the old cipher type have been converted the old cbc/ecb PadLock operations will be removed. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
Now that the tfm is passed directly to setkey instead of the ctx, we no longer need to pass the &tfm->crt_flags pointer. This patch also gets rid of a few unnecessary checks on the key length for ciphers as the cipher layer guarantees that the key length is within the bounds specified by the algorithm. Rather than testing dia_setkey every time, this patch does it only once during crypto_alloc_tfm. The redundant check from crypto_digest_setkey is also removed. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Michal Ludvig 提交于
TFMs are local variables. No need to declare them static. After all one is enough. Signed-off-by: NMichal Ludvig <michal@logix.cz> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Michal Ludvig 提交于
Compile a helper module padlock.ko that will try to autoload all configured padlock algorithms. This also provides backward compatibility with the ancient times before padlock.ko was renamed to padlock-aes.ko Signed-off-by: NMichal Ludvig <michal@logix.cz> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-