All ALC882 targa-* models can be replaced with the auto-parser just
with the additional GPIO3 setup.  And it's generically applied to all
MSI boards unless other quirks are present.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No, I'm not Mr. Monk, but can't resist...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 model=acer-aspire requires the additional COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This quirk is anyway not used any more, so no problem to remove.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This works well without any special handling with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These static configs are no longer needed by replacement with the
auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move these quitks to the auto-parser.  They just need some EAPD setups
in addition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are working well with the auto-parser although they have
relatively complex setup.  Let's go forward.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove all ALC882 static configurations for all Lenovo and Haier-w66
quirks.  They work fine with the auto-parser now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These machines are working well with the auto-parser without static
configurations.  More diet.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These models work fine with the auto-parser with the additional COEF
setup.  The iMac 7,1 (106b:3200) also uses the same quirk, so remove it
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not only PCI SSIDs but also look through codec SSIDs for fix-up table
entries.  MacBook tend to give the same PCI SSID but unique codec SSIDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ASUS EEE1601 works almost fine with the auto-parser but the static
configuration has a certain specific COEF verb.  Add this to the fix-up
list so that we can drop the whole EEE1601 static config from
alc882_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works well with the auto-parser and the default BIOS setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the
new model dell-vostro-3500.
Signed-off-by: NJulian Wollrath <jwollrath@web.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

According to the bug reporter, model=auto is needed to make the
internal microphone work.

BugLink: https://bugs.launchpad.net/bugs/819699
Reported-by: Andrej (agno01)
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the recent usb-audio driver, the initialization of volume ranges
may be delayed when the device doesn't respond well at the probing time.
But the volume quirks for certain devices are applied only in
mixer_ctl_feature_info() thus only at the very first probe and will be
missing when the volume range is initialized later.

This patch moves the volume quirk code to be always called from the
volume-range extraction (get_min_max()), so that the quirks are properly
applied in the later init time.
Reported-and-tested-by: NAlexey Fisher <bug-track@fisher-privat.net>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the
auto-parser, and drop the static configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that model=ultra is supported well by the auto-parser, we can get rid
of the whole alc262_quirks.c and its related codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A machine like Q1-ultra which has only a single HP but no mic-jack, we
can re-task the headhpone as an external mic jack.  This was done formerly
in ALC262 model=ultra quirk, and now the auto-parser supports this mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now most of ALC262 stuff has been moved to the auto-parser, and no longer
need for keeping model=basic.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Both entries for ALC262 model=hippo work well with the auto-parser and
the default BIOS setup.  No static configs are needed, so drop them.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This model (actually BenQ Joybook) works fine with the default auto-parser
and the BIOS setup.  Just drop the static quirks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works well with the auto-parse and the default BIOS setup when an
additional COEF setup (for benq) is used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The conversion from ALC262 model=benq and model=benq-t31 static configs
to auto-parser requires the manual COEF setups for corresponding models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The static quirks for ALC262 Lenovo 3000 can be covered by the auto-
parser with a fixup of the mic-pin to VREF50 and the additional COEF
verb.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This laptop works also fine with the auto-parser and the BIOS setup.
A good boy.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This laptop works fine with the current auto-parser and the BIOS setup,
so let's drop the static configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the auto-parser for ALC262 model=toshiba-rx1 with the fixed pin-
configs.  The BIOS table seems incorrect, so many pin entries are
overwritten to match with the former quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and
drop the static configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a Realtek codec has a matrix-style capture-source selection, we
need to scan all connections instead of only imux items.  Otherwise some
input might be kept unmuted.  Although the corresponding input must be
dead so there should be no input from it, it's still safer to mute the
route completely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recently merged 228cf793 looks a bit hackish while it is not.
The change was quite simple. In a virtualized environment the
patch unhacks old kludge introduced for old broken AC97 hardware.

This patch adds proper comment to "unkludge" code.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...

Mountpoint crossing is similar to following procfs symlinks - we do
not get ->d_revalidate() called for dentry we have arrived at, with
unpleasant consequences for NFS4.

Simple way to reproduce the problem in mainline:

    cat >/tmp/a.c <<'EOF'
    #include <unistd.h>
    #include <fcntl.h>
    #include <stdio.h>
    main()
    {
            struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1};
            if (fcntl(0, F_SETLK, &fl))
                    perror("setlk");
    }
    EOF
    cc /tmp/a.c -o /tmp/test

then on nfs4:

    mount --bind file1 file2
    /tmp/test < file1		# ok
    /tmp/test < file2		# spews "setlk: No locks available"...

What happens is the missing call of ->d_revalidate() after mountpoint
crossing and that's where NFS4 would issue OPEN request to server.

The fix is simple - treat mountpoint crossing the same way we deal with
following procfs-style symlinks.  I.e.  set LOOKUP_JUMPED...

Cc: stable@kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Fix live annotation in the --stdio interface
  perf top tui: Don't recalc column widths considering just the first page
  perf report: Add progress bar when processing time ordered events
  perf hists browser: Warn about lost events
  perf tools: Fix a typo of command name as trace-cmd
  perf hists: Fix recalculation of total_period when sorting entries
  perf header: Fix build on old systems
  perf ui browser: Handle K_RESIZE in dialog windows
  perf ui browser: No need to switch char sets that often
  perf hists browser: Use K_TIMER
  perf ui: Rename ui__warning_paranoid to ui__error_paranoid
  perf ui: Reimplement the popup windows using libslang
  perf ui: Reimplement ui__popup_menu using ui__browser
  perf ui: Reimplement ui_helpline using libslang
  perf ui: Improve handling sigwinch a bit
  perf ui progress: Reimplement using slang
  perf evlist: Fix grouping of multiple events

Commit 32aaeffb (Merge branch
'modsplit-Oct31_2011'...) caused some build errors. Fix these
and make sure we always have export.h or module.h included
for MODULE_ and EXPORT_SYMBOL users:

$ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \
  grep -L linux/module.h
  arch/arm/mach-omap2/dsp.c
  arch/arm/mach-omap2/mailbox.c
  arch/arm/mach-omap2/omap-iommu.c
  arch/arm/mach-omap2/smartreflex.c

Also check we either have export.h or module.h included
for the files exporting symbols:

$ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \
  grep -L linux/export.h | xargs grep -L linux/module.h

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Include linux/export.h to fix below build warning:

  CC      arch/arm/plat-omap/omap_device.o
arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class
arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>