The hierarchical versions of per-memcg counters in memory.stat are all
calculated the same way and are all named total_<counter>.

Documenting the pattern is easier for maintenance than listing each
counter twice.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NYing Han <yinghan@google.com>
Randy Dunlap <rdunlap@xenotime.net>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm->page_table_lock is hotly contested for page fault tests and isn't
necessary to do mem_cgroup_uncharge_page() in do_huge_pmd_wp_page().
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Andrew pointed out that the is_mlocked_vma() is misnamed.  A function
with name like that would expect bool return and no side-effects.

Since it is called on the fault path for new page, rename it in this
patch.
Signed-off-by: NYing Han <yinghan@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Reviewed-by: NMinchan Kim <minchan@kernel.org>
[akpm@linux-foundation.org: s/mlock_vma_newpage/mlock_vma_newpage/, per Minchan]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The rmap walker checking page table references has historically ignored
references from VMAs that were not part of the memcg that was being
reclaimed during memcg hard limit reclaim.

When transitioning global reclaim to memcg hierarchy reclaim, I missed
that bit and now references from outside a memcg are ignored even during
global reclaim.

Reverting back to traditional behaviour - count all references during
global reclaim and only mind references of the memcg being reclaimed
during limit reclaim would be one option.

However, the more generic idea is to ignore references exactly then when
they are outside the hierarchy that is currently under reclaim; because
only then will their reclamation be of any use to help the pressure
situation.  It makes no sense to ignore references from a sibling memcg
and then evict a page that will be immediately refaulted by that sibling
which contributes to the same usage of the common ancestor under
reclaim.

The solution: make the rmap walker ignore references from VMAs that are
not part of the hierarchy that is being reclaimed.

Flat limit reclaim will stay the same, hierarchical limit reclaim will
mind the references only to pages that the hierarchy owns.  Global
reclaim, since it reclaims from all memcgs, will be fixed to regard all
references.

[akpm@linux-foundation.org: name the args in the declaration]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Konstantin Khlebnikov<khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Library functions should not grab locks when the callsites can do it,
even if the lock nests like the rcu read-side lock does.

Push the rcu_read_lock() from css_is_ancestor() to its single user,
mem_cgroup_same_or_subtree() in preparation for another user that may
already hold the rcu read-side lock.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s/from_nodes/from and s/to_nodes/to/.  The "_nodes" is redundant - it
duplicates the argument's type.

Done in a fit of irritation over 80-col issues :(

Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <mkosaki@redhat.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While running an application that moves tasks from one cpuset to another
I noticed that it takes much longer and moves many more pages than
expected.

The reason for this is do_migrate_pages() does its best to preserve the
relative node differential from the first node of the cpuset because the
application may have been written with that in mind.  If memory was
interleaved on the nodes of the source cpuset by an application
do_migrate_pages() will try its best to maintain that interleaving on
the nodes of the destination cpuset.  This means copying the memory from
all source nodes to the destination nodes even if the source and
destination nodes overlap.

This is a problem for userspace NUMA placement tools.  The amount of
time spent doing extra memory moves cancels out some of the NUMA
performance improvements.  Furthermore, if the number of source and
destination nodes are to maintain the previous interleaving layout
anyway.

This patch changes do_migrate_pages() to only preserve the relative
layout inside the program if the number of NUMA nodes in the source and
destination mask are the same.  If the number is different, we do a much
more efficient migration by not touching memory that is in an allowed
node.

This preserves the old behaviour for programs that want it, while
allowing a userspace NUMA placement tool to use the new, faster
migration.  This improves performance in our tests by up to a factor of
7.

Without this change migrating tasks from a cpuset containing nodes 0-7
to a cpuset containing nodes 3-4, we migrate from ALL the nodes even if
they are in the both the source and destination nodesets:

   Migrating 7 to 4
   Migrating 6 to 3
   Migrating 5 to 4
   Migrating 4 to 3
   Migrating 1 to 4
   Migrating 3 to 4
   Migrating 0 to 3
   Migrating 2 to 3

With this change we only migrate from nodes that are not in the
destination nodesets:

   Migrating 7 to 4
   Migrating 6 to 3
   Migrating 5 to 4
   Migrating 2 to 3
   Migrating 1 to 4
   Migrating 0 to 3

Yet if we move from a cpuset containing nodes 2,3,4 to a cpuset
containing 3,4,5 we still do move everything so that we preserve the
desired NUMA offsets:

   Migrating 4 to 5
   Migrating 3 to 4
   Migrating 2 to 3

As far as performance is concerned this simple patch improves the time
it takes to move 14, 20 and 26 large tasks from a cpuset containing
nodes 0-7 to a cpuset containing nodes 1 & 3 by up to a factor of 7.
Here are the timings with and without the patch:

BEFORE PATCH -- Move times: 59, 140, 651 seconds
============

  Moving 14 tasks from nodes (0-7) to nodes (1,3)
  numad(8780) do_migrate_pages (mm=0xffff88081d414400
  from_nodes=0xffff880818c81d28 to_nodes=0xffff880818c81ce8 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x7 dest=0x3 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x6 dest=0x1 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x5 dest=0x3 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x4 dest=0x1 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x2 dest=0x1 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x1 dest=0x3 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d414400 source=0x0 dest=0x1 flags=0x4)
  (Above moves repeated for each of the 14 tasks...)
  PID 8890 moved to node(s) 1,3 in 59.2 seconds

  Moving 20 tasks from nodes (0-7) to nodes (1,4-5)
  numad(8780) do_migrate_pages (mm=0xffff88081d88c700
  from_nodes=0xffff880818c81d28 to_nodes=0xffff880818c81ce8 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d88c700 source=0x7 dest=0x4 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d88c700 source=0x6 dest=0x1 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d88c700 source=0x3 dest=0x1 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d88c700 source=0x2 dest=0x5 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d88c700 source=0x1 dest=0x4 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d88c700 source=0x0 dest=0x1 flags=0x4)
  (Above moves repeated for each of the 20 tasks...)
  PID 8962 moved to node(s) 1,4-5 in 139.88 seconds

  Moving 26 tasks from nodes (0-7) to nodes (1-3,5)
  numad(8780) do_migrate_pages (mm=0xffff88081d5bc740
  from_nodes=0xffff880818c81d28 to_nodes=0xffff880818c81ce8 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x7 dest=0x5 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x6 dest=0x3 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x5 dest=0x2 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x3 dest=0x5 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x2 dest=0x3 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x1 dest=0x2 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x0 dest=0x1 flags=0x4)
  numad(8780) migrate_to_node (mm=0xffff88081d5bc740 source=0x4 dest=0x1 flags=0x4)
  (Above moves repeated for each of the 26 tasks...)
  PID 9058 moved to node(s) 1-3,5 in 651.45 seconds

AFTER PATCH -- Move times: 42, 56, 93 seconds
===========

  Moving 14 tasks from nodes (0-7) to nodes (5,7)
  numad(33209) do_migrate_pages (mm=0xffff88101d5ff140
  from_nodes=0xffff88101e7b5d28 to_nodes=0xffff88101e7b5ce8 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d5ff140 source=0x6 dest=0x5 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d5ff140 source=0x4 dest=0x5 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d5ff140 source=0x3 dest=0x7 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d5ff140 source=0x2 dest=0x5 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d5ff140 source=0x1 dest=0x7 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d5ff140 source=0x0 dest=0x5 flags=0x4)
  (Above moves repeated for each of the 14 tasks...)
  PID 33221 moved to node(s) 5,7 in 41.67 seconds

  Moving 20 tasks from nodes (0-7) to nodes (1,3,5)
  numad(33209) do_migrate_pages (mm=0xffff88101d6c37c0
  from_nodes=0xffff88101e7b5d28 to_nodes=0xffff88101e7b5ce8 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d6c37c0 source=0x7 dest=0x3 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d6c37c0 source=0x6 dest=0x1 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d6c37c0 source=0x4 dest=0x3 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d6c37c0 source=0x2 dest=0x5 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d6c37c0 source=0x0 dest=0x1 flags=0x4)
  (Above moves repeated for each of the 20 tasks...)
  PID 33289 moved to node(s) 1,3,5 in 56.3 seconds

  Moving 26 tasks from nodes (0-7) to nodes (1,3,5,7)
  numad(33209) do_migrate_pages (mm=0xffff88101d924400
  from_nodes=0xffff88101e7b5d28 to_nodes=0xffff88101e7b5ce8 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d924400 source=0x6 dest=0x5 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d924400 source=0x4 dest=0x1 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d924400 source=0x2 dest=0x5 flags=0x4)
  numad(33209) migrate_to_node (mm=0xffff88101d924400 source=0x0 dest=0x1 flags=0x4)
  (Above moves repeated for each of the 26 tasks...)
  PID 33372 moved to node(s) 1,3,5,7 in 92.67 seconds

[akpm@linux-foundation.org: clean up comment layout]
Signed-off-by: NLarry Woodman <lwoodman@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On COW, a new hugepage is allocated and charged to the memcg.  If the
system is oom or the charge to the memcg fails, however, the fault
handler will return VM_FAULT_OOM which results in an oom kill.

Instead, it's possible to fallback to splitting the hugepage so that the
COW results only in an order-0 page being allocated and charged to the
memcg which has a higher liklihood to succeed.  This is expensive
because the hugepage must be split in the page fault handler, but it is
much better than unnecessarily oom killing a process.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm/vmstat.c: remove debug fs entries on failure of file creation and made extfrag_debug_root dentry local

Remove debug fs files and directory on failure.  Since no one is using
"extfrag_debug_root" dentry outside of extfrag_debug_init(), make it
local to the function.
Signed-off-by: NSasikantha babu <sasikanth.v19@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The vma length in dup_mmap is calculated and stored in a unsigned int,
which is insufficient and hence overflows for very large maps (beyond
16TB). The following program demonstrates this:

#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>

#define GIG 1024 * 1024 * 1024L
#define EXTENT 16393

int main(void)
{
        int i, r;
        void *m;
        char buf[1024];

        for (i = 0; i < EXTENT; i++) {
                m = mmap(NULL, (size_t) 1 * 1024 * 1024 * 1024L,
                         PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);

                if (m == (void *)-1)
                        printf("MMAP Failed: %d\n", m);
                else
                        printf("%d : MMAP returned %p\n", i, m);

                r = fork();

                if (r == 0) {
                        printf("%d: successed\n", i);
                        return 0;
                } else if (r < 0)
                        printf("FORK Failed: %d\n", r);
                else if (r > 0)
                        wait(NULL);
        }
        return 0;
}

Increase the storage size of the result to unsigned long, which is
sufficient for storing the difference between addresses.
Signed-off-by: NSiddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "if (mm)" check is not required in find_vma, as the kernel code
calls find_vma only when it is absolutely sure that the mm_struct arg to
it is non-NULL.

Remove the if(mm) check and adding the a WARN_ONCE(!mm) for now.  This
will serve the purpose of mandating that the execution
context(user-mode/kernel-mode) be known before find_vma is called.  Also
fixed 2 checkpatch.pl errors in the declaration of the rb_node and
vma_tmp local variables.

I was browsing through the internet and read a discussion at
https://lkml.org/lkml/2012/3/27/342 which discusses removal of the
validation check within find_vma.  Since no-one responded, I decided to
send this patch with Andrew's suggestions.

[akpm@linux-foundation.org: add remove-me comment]
Signed-off-by: NRajman Mekaco <rajman.mekaco@gmail.com>
Cc: Kautuk Consul <consul.kautuk@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The advantage of kcalloc is, that will prevent integer overflows which
could result from the multiplication of number of elements and size and
it is also a bit nicer to read.

The semantic patch that makes this change is available in
https://lkml.org/lkml/2011/11/25/107Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/sys/devices/system/node/{online,possible} outputs a garbage byte
because print_nodes_state() returns content size + 1.  To fix the bug,
the patch changes the use of cpuset_sprintf_cpulist to follow the use at
other places, which is clearer and safer.

This bug was introduced in v2.6.24 (commit bde631a5: "mm: add node
states sysfs class attributeS").
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is little motiviation for reclaim_mode_t once RECLAIM_MODE_[A]SYNC
and lumpy reclaim have been removed.  This patch gets rid of
reclaim_mode_t as well and improves the documentation about what
reclaim/compaction is and when it is triggered.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch stops reclaim/compaction entering sync reclaim as this was
only intended for lumpy reclaim and an oversight.  Page migration has
its own logic for stalling on writeback pages if necessary and memory
compaction is already using it.

Waiting on page writeback is bad for a number of reasons but the primary
one is that waiting on writeback to a slow device like USB can take a
considerable length of time.  Page reclaim instead uses
wait_iff_congested() to throttle if too many dirty pages are being
scanned.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This series removes lumpy reclaim and some stalling logic that was
unintentionally being used by memory compaction.  The end result is that
stalling on dirty pages during page reclaim now depends on
wait_iff_congested().

Four kernels were compared

  3.3.0     vanilla
  3.4.0-rc2 vanilla
  3.4.0-rc2 lumpyremove-v2 is patch one from this series
  3.4.0-rc2 nosync-v2r3 is the full series

Removing lumpy reclaim saves almost 900 bytes of text whereas the full
series removes 1200 bytes.

     text     data      bss       dec     hex  filename
  67403754  1927944  2260992  10929311  a6c49f  vmlinux-3.4.0-rc2-vanilla
  6739479  1927944  2260992  10928415  a6c11f  vmlinux-3.4.0-rc2-lumpyremove-v2
  6739159  1927944  2260992  10928095  a6bfdf  vmlinux-3.4.0-rc2-nosync-v2

There are behaviour changes in the series and so tests were run with
monitoring of ftrace events.  This disrupts results so the performance
results are distorted but the new behaviour should be clearer.

fs-mark running in a threaded configuration showed little of interest as
it did not push reclaim aggressively

  FS-Mark Multi Threaded
                          3.3.0-vanilla       rc2-vanilla       lumpyremove-v2r3       nosync-v2r3
  Files/s  min           3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
  Files/s  mean          3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
  Files/s  stddev        0.00 ( 0.00%)        0.00 ( 0.00%)        0.00 ( 0.00%)        0.00 ( 0.00%)
  Files/s  max           3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)        3.20 ( 0.00%)
  Overhead min      508667.00 ( 0.00%)   521350.00 (-2.49%)   544292.00 (-7.00%)   547168.00 (-7.57%)
  Overhead mean     551185.00 ( 0.00%)   652690.73 (-18.42%)   991208.40 (-79.83%)   570130.53 (-3.44%)
  Overhead stddev    18200.69 ( 0.00%)   331958.29 (-1723.88%)  1579579.43 (-8578.68%)     9576.81 (47.38%)
  Overhead max      576775.00 ( 0.00%)  1846634.00 (-220.17%)  6901055.00 (-1096.49%)   585675.00 (-1.54%)
  MMTests Statistics: duration
  Sys Time Running Test (seconds)             309.90    300.95    307.33    298.95
  User+Sys Time Running Test (seconds)        319.32    309.67    315.69    307.51
  Total Elapsed Time (seconds)               1187.85   1193.09   1191.98   1193.73

  MMTests Statistics: vmstat
  Page Ins                                       80532       82212       81420       79480
  Page Outs                                  111434984   111456240   111437376   111582628
  Swap Ins                                           0           0           0           0
  Swap Outs                                          0           0           0           0
  Direct pages scanned                           44881       27889       27453       34843
  Kswapd pages scanned                        25841428    25860774    25861233    25843212
  Kswapd pages reclaimed                      25841393    25860741    25861199    25843179
  Direct pages reclaimed                         44881       27889       27453       34843
  Kswapd efficiency                                99%         99%         99%         99%
  Kswapd velocity                            21754.791   21675.460   21696.029   21649.127
  Direct efficiency                               100%        100%        100%        100%
  Direct velocity                               37.783      23.375      23.031      29.188
  Percentage direct scans                           0%          0%          0%          0%

ftrace showed that there was no stalling on writeback or pages submitted
for IO from reclaim context.

postmark was similar and while it was more interesting, it also did not
push reclaim heavily.

  POSTMARK
                                       3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
  Transactions per second:               16.00 ( 0.00%)    20.00 (25.00%)    18.00 (12.50%)    17.00 ( 6.25%)
  Data megabytes read per second:        18.80 ( 0.00%)    24.27 (29.10%)    22.26 (18.40%)    20.54 ( 9.26%)
  Data megabytes written per second:     35.83 ( 0.00%)    46.25 (29.08%)    42.42 (18.39%)    39.14 ( 9.24%)
  Files created alone per second:        28.00 ( 0.00%)    38.00 (35.71%)    34.00 (21.43%)    30.00 ( 7.14%)
  Files create/transact per second:       8.00 ( 0.00%)    10.00 (25.00%)     9.00 (12.50%)     8.00 ( 0.00%)
  Files deleted alone per second:       556.00 ( 0.00%)  1224.00 (120.14%)  3062.00 (450.72%)  6124.00 (1001.44%)
  Files delete/transact per second:       8.00 ( 0.00%)    10.00 (25.00%)     9.00 (12.50%)     8.00 ( 0.00%)

  MMTests Statistics: duration
  Sys Time Running Test (seconds)             113.34    107.99    109.73    108.72
  User+Sys Time Running Test (seconds)        145.51    139.81    143.32    143.55
  Total Elapsed Time (seconds)               1159.16    899.23    980.17   1062.27

  MMTests Statistics: vmstat
  Page Ins                                    13710192    13729032    13727944    13760136
  Page Outs                                   43071140    42987228    42733684    42931624
  Swap Ins                                           0           0           0           0
  Swap Outs                                          0           0           0           0
  Direct pages scanned                               0           0           0           0
  Kswapd pages scanned                         9941613     9937443     9939085     9929154
  Kswapd pages reclaimed                       9940926     9936751     9938397     9928465
  Direct pages reclaimed                             0           0           0           0
  Kswapd efficiency                                99%         99%         99%         99%
  Kswapd velocity                             8576.567   11051.058   10140.164    9347.109
  Direct efficiency                               100%        100%        100%        100%
  Direct velocity                                0.000       0.000       0.000       0.000

It looks like here that the full series regresses performance but as
ftrace showed no usage of wait_iff_congested() or sync reclaim I am
assuming it's a disruption due to monitoring.  Other data such as memory
usage, page IO, swap IO all looked similar.

Running a benchmark with a plain DD showed nothing very interesting.
The full series stalled in wait_iff_congested() slightly less but stall
times on vanilla kernels were marginal.

Running a benchmark that hammered on file-backed mappings showed stalls
due to congestion but not in sync writebacks

  MICRO
                                       3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
  MMTests Statistics: duration
  Sys Time Running Test (seconds)             308.13    294.50    298.75    299.53
  User+Sys Time Running Test (seconds)        330.45    316.28    318.93    320.79
  Total Elapsed Time (seconds)               1814.90   1833.88   1821.14   1832.91

  MMTests Statistics: vmstat
  Page Ins                                      108712      120708       97224      110344
  Page Outs                                  155514576   156017404   155813676   156193256
  Swap Ins                                           0           0           0           0
  Swap Outs                                          0           0           0           0
  Direct pages scanned                         2599253     1550480     2512822     2414760
  Kswapd pages scanned                        69742364    71150694    68839041    69692533
  Kswapd pages reclaimed                      34824488    34773341    34796602    34799396
  Direct pages reclaimed                         53693       94750       61792       75205
  Kswapd efficiency                                49%         48%         50%         49%
  Kswapd velocity                            38427.662   38797.901   37799.972   38022.889
  Direct efficiency                                 2%          6%          2%          3%
  Direct velocity                             1432.174     845.464    1379.807    1317.446
  Percentage direct scans                           3%          2%          3%          3%
  Page writes by reclaim                             0           0           0           0
  Page writes file                                   0           0           0           0
  Page writes anon                                   0           0           0           0
  Page reclaim immediate                             0           0           0        1218
  Page rescued immediate                             0           0           0           0
  Slabs scanned                                  15360       16384       13312       16384
  Direct inode steals                                0           0           0           0
  Kswapd inode steals                             4340        4327        1630        4323

  FTrace Reclaim Statistics: congestion_wait
  Direct number congest     waited                 0          0          0          0
  Direct time   congest     waited               0ms        0ms        0ms        0ms
  Direct full   congest     waited                 0          0          0          0
  Direct number conditional waited               900        870        754        789
  Direct time   conditional waited               0ms        0ms        0ms       20ms
  Direct full   conditional waited                 0          0          0          0
  KSwapd number congest     waited              2106       2308       2116       1915
  KSwapd time   congest     waited          139924ms   157832ms   125652ms   132516ms
  KSwapd full   congest     waited              1346       1530       1202       1278
  KSwapd number conditional waited             12922      16320      10943      14670
  KSwapd time   conditional waited               0ms        0ms        0ms        0ms
  KSwapd full   conditional waited                 0          0          0          0

Reclaim statistics are not radically changed.  The stall times in kswapd
are massive but it is clear that it is due to calls to congestion_wait()
and that is almost certainly the call in balance_pgdat().  Otherwise
stalls due to dirty pages are non-existant.

I ran a benchmark that stressed high-order allocation.  This is very
artifical load but was used in the past to evaluate lumpy reclaim and
compaction.  Generally I look at allocation success rates and latency
figures.

  STRESS-HIGHALLOC
                   3.3.0-vanilla       rc2-vanilla  lumpyremove-v2r3       nosync-v2r3
  Pass 1          81.00 ( 0.00%)    28.00 (-53.00%)    24.00 (-57.00%)    28.00 (-53.00%)
  Pass 2          82.00 ( 0.00%)    39.00 (-43.00%)    38.00 (-44.00%)    43.00 (-39.00%)
  while Rested    88.00 ( 0.00%)    87.00 (-1.00%)    88.00 ( 0.00%)    88.00 ( 0.00%)

  MMTests Statistics: duration
  Sys Time Running Test (seconds)             740.93    681.42    685.14    684.87
  User+Sys Time Running Test (seconds)       2922.65   3269.52   3281.35   3279.44
  Total Elapsed Time (seconds)               1161.73   1152.49   1159.55   1161.44

  MMTests Statistics: vmstat
  Page Ins                                     4486020     2807256     2855944     2876244
  Page Outs                                    7261600     7973688     7975320     7986120
  Swap Ins                                       31694           0           0           0
  Swap Outs                                      98179           0           0           0
  Direct pages scanned                           53494       57731       34406      113015
  Kswapd pages scanned                         6271173     1287481     1278174     1219095
  Kswapd pages reclaimed                       2029240     1281025     1260708     1201583
  Direct pages reclaimed                          1468       14564       16649       92456
  Kswapd efficiency                                32%         99%         98%         98%
  Kswapd velocity                             5398.133    1117.130    1102.302    1049.641
  Direct efficiency                                 2%         25%         48%         81%
  Direct velocity                               46.047      50.092      29.672      97.306
  Percentage direct scans                           0%          4%          2%          8%
  Page writes by reclaim                       1616049           0           0           0
  Page writes file                             1517870           0           0           0
  Page writes anon                               98179           0           0           0
  Page reclaim immediate                        103778       27339        9796       17831
  Page rescued immediate                             0           0           0           0
  Slabs scanned                                1096704      986112      980992      998400
  Direct inode steals                              223      215040      216736      247881
  Kswapd inode steals                           175331       61548       68444       63066
  Kswapd skipped wait                            21991           0           1           0
  THP fault alloc                                    1         135         125         134
  THP collapse alloc                               393         311         228         236
  THP splits                                        25          13           7           8
  THP fault fallback                                 0           0           0           0
  THP collapse fail                                  3           5           7           7
  Compaction stalls                                865        1270        1422        1518
  Compaction success                               370         401         353         383
  Compaction failures                              495         869        1069        1135
  Compaction pages moved                        870155     3828868     4036106     4423626
  Compaction move failure                        26429       23865       29742       27514

Success rates are completely hosed for 3.4-rc2 which is almost certainly
due to commit fe2c2a10 ("vmscan: reclaim at order 0 when compaction
is enabled").  I expected this would happen for kswapd and impair
allocation success rates (https://lkml.org/lkml/2012/1/25/166) but I did
not anticipate this much a difference: 80% less scanning, 37% less
reclaim by kswapd

In comparison, reclaim/compaction is not aggressive and gives up easily
which is the intended behaviour.  hugetlbfs uses __GFP_REPEAT and would
be much more aggressive about reclaim/compaction than THP allocations
are.  The stress test above is allocating like neither THP or hugetlbfs
but is much closer to THP.

Mainline is now impaired in terms of high order allocation under heavy
load although I do not know to what degree as I did not test with
__GFP_REPEAT.  Keep this in mind for bugs related to hugepage pool
resizing, THP allocation and high order atomic allocation failures from
network devices.

In terms of congestion throttling, I see the following for this test

  FTrace Reclaim Statistics: congestion_wait
  Direct number congest     waited                 3          0          0          0
  Direct time   congest     waited               0ms        0ms        0ms        0ms
  Direct full   congest     waited                 0          0          0          0
  Direct number conditional waited               957        512       1081       1075
  Direct time   conditional waited               0ms        0ms        0ms        0ms
  Direct full   conditional waited                 0          0          0          0
  KSwapd number congest     waited                36          4          3          5
  KSwapd time   congest     waited            3148ms      400ms      300ms      500ms
  KSwapd full   congest     waited                30          4          3          5
  KSwapd number conditional waited             88514        197        332        542
  KSwapd time   conditional waited            4980ms        0ms        0ms        0ms
  KSwapd full   conditional waited                49          0          0          0

The "conditional waited" times are the most interesting as this is
directly impacted by the number of dirty pages encountered during scan.
As lumpy reclaim is no longer scanning contiguous ranges, it is finding
fewer dirty pages.  This brings wait times from about 5 seconds to 0.
kswapd itself is still calling congestion_wait() so it'll still stall but
it's a lot less.

In terms of the type of IO we were doing, I see this

  FTrace Reclaim Statistics: mm_vmscan_writepage
  Direct writes anon  sync                         0          0          0          0
  Direct writes anon  async                        0          0          0          0
  Direct writes file  sync                         0          0          0          0
  Direct writes file  async                        0          0          0          0
  Direct writes mixed sync                         0          0          0          0
  Direct writes mixed async                        0          0          0          0
  KSwapd writes anon  sync                         0          0          0          0
  KSwapd writes anon  async                    91682          0          0          0
  KSwapd writes file  sync                         0          0          0          0
  KSwapd writes file  async                   822629          0          0          0
  KSwapd writes mixed sync                         0          0          0          0
  KSwapd writes mixed async                        0          0          0          0

In 3.2, kswapd was doing a bunch of async writes of pages but
reclaim/compaction was never reaching a point where it was doing sync
IO.  This does not guarantee that reclaim/compaction was not calling
wait_on_page_writeback() but I would consider it unlikely.  It indicates
that merging patches 2 and 3 to stop reclaim/compaction calling
wait_on_page_writeback() should be safe.

This patch:

Lumpy reclaim had a purpose but in the mind of some, it was to kick the
system so hard it trashed.  For others the purpose was to complicate
vmscan.c.  Over time it was giving softer shoes and a nicer attitude but
memory compaction needs to step up and replace it so this patch sends
lumpy reclaim to the farm.

The tracepoint format changes for isolating LRU pages with this patch
applied.  Furthermore reclaim/compaction can no longer queue dirty pages
in pageout() if the underlying BDI is congested.  Lumpy reclaim used
this logic and reclaim/compaction was using it in error.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The swap token code no longer fits in with the current VM model.  It
does not play well with cgroups or the better NUMA placement code in
development, since we have only one swap token globally.

It also has the potential to mess with scalability of the system, by
increasing the number of non-reclaimable pages on the active and
inactive anon LRU lists.

Last but not least, the swap token code has been broken for a year
without complaints, as reported by Konstantin Khlebnikov.  This suggests
we no longer have much use for it.

The days of sub-1G memory systems with heavy use of swap are over.  If
we ever need thrashing reducing code in the future, we will have to
implement something that does scale.
Signed-off-by: NRik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: NBob Picco <bpicco@meloft.net>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The transparent hugepages feature is careful to not invoke the oom
killer when a hugepage cannot be allocated.

pte_alloc_one() failing in __do_huge_pmd_anonymous_page(), however,
currently results in VM_FAULT_OOM which invokes the pagefault oom killer
to kill a memory-hogging task.

This is unnecessary since it's possible to drop the reference to the
hugepage and fallback to allocating a small page.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "ret" variable is unnecessary in __do_huge_pmd_anonymous_page(), so
remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arguments f & t and fields from & to of struct file_region are
defined as long.  So use long instead of int to type the temp vars.
Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NHillf Danton <dhillf@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have enum definition in mempolicy.h: MPOL_REBIND_ONCE.  It should
replace the magic number 0 for step comparison in function
mpol_rebind_policy.
Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These things tend to get out of sync with time so let the compiler
automatically enter the current function name using __func__.

No functional change.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Acked-by: NAndi Kleen <andi@firstfloor.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A missing validation of the value returned by find_vma() could cause a
NULL ptr dereference when walking the pagetable.

This is triggerable from usermode by a simple user by trying to read a
page info out of /proc/pid/pagemap which doesn't exist.

Introduced by commit 025c5b24 ("thp: optimize away unnecessary page
table locking").
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>		[3.4.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cris doesn't implement atomic64 operations neither, should select
GENERIC_ATOMIC64.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f56f821f ("mm: extend prefault helpers to fault in more than
PAGE_SIZE") added in the new functions: fault_in_multipages_writeable()
and fault_in_multipages_readable().

However, we currently see:

  include/linux/pagemap.h:492: warning: 'ret' may be used uninitialized in this function
  include/linux/pagemap.h:492: note: 'ret' was declared here

Unlike a lot of gcc nags, this one appears somewhat legit.  i.e.  passing
in an invalid negative value of "size" does make it look like all the
conditionals in there would be bypassed and the uninitialized value would
be returned.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...

Pull NFS client updates from Trond Myklebust:
 "New features include:
   - Rewrite the O_DIRECT code so that it can share the same coalescing
     and pNFS functionality as the page cache code.
   - Allow the server to provide hints as to when we should use pNFS,
     and when it is more efficient to read and write through the
     metadata server.
   - NFS cache consistency updates:
     * Use the ctime to emulate a change attribute for NFSv2/v3 so that
       all NFS versions can share the same cache management code.
     * New cache management code will only look at the change attribute
       and size attribute when deciding whether or not our cached data
       is still valid or not.
     * Don't request NFSv4 post-op attributes on writes in cases such as
       O_DIRECT, where we don't care about data cache consistency, or
       when we have a write delegation, and know that our cache is still
       consistent.
     * Don't request NFSv4 post-op attributes on operations such as
       COMMIT, where there are no expected metadata updates.
     * Don't request NFSv4 directory post-op attributes in cases where
       the operations themselves already return change attribute
       updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and
       RENAME.
   - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
     if we detect no attempts to lookup filenames.
   - Improve the code sharing between NFSv2/v3 and v4 mounts
   - NFSv4.1 state management efficiency improvements
   - More patches in preparation for NFSv4/v4.1 migration functionality."

Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache
qstr name initialization changes (that made the length/hash a 64-bit
union)

* tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits)
  NFSv4: Add debugging printks to state manager
  NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO
  NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE
  NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error
  NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION
  NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager
  NFSv4.1: Handle errors in nfs4_bind_conn_to_session
  NFSv4.1: nfs4_bind_conn_to_session should drain the session
  NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid
  NFSv4.1: Add DESTROY_CLIENTID
  NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session
  NFSv4.1: Ensure we use the correct credentials for session create/destroy
  NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations
  NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease
  NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM
  NFSv4: Clean up the error handling for nfs4_reclaim_lease
  NFSv4.1: Exchange ID must use GFP_NOFS allocation mode
  nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN*
  nfs4.1: add BIND_CONN_TO_SESSION operation
  NFSv4.1 test the mdsthreshold hint parameters
  ...

This is caused by tty_release using tty_lock_pair to lock both sides of
the pty/tty pair, and then tty_ldisc_release dropping and relocking one
side only.  We can drop both fine, so drop both to avoid any lock
ordering concerns.

Rework the release path to fix the new locking model.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ptmx_open path takes the tty and devpts locks in the wrong order
because tty_init_dev locks and returns a locked tty.  As far as I can
tell this is actually safe anyway because the tty being returned is new
so nobody can get a reference to lock it at this point.

However we don't even need the devpts lock at this point, it's only held
as a byproduct of the way the locks were pushe down.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If a file OPEN is denied due to a share lock, the resulting
NFS4ERR_SHARE_DENIED is currently mapped to the default EIO.
This patch adds a more appropriate mapping, and brings Linux
into line with what Solaris 10 does.

See https://bugzilla.kernel.org/show_bug.cgi?id=43286Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Pull exofs updates from Boaz Harrosh:
 "Just a couple of patches.  The first is a BUG fix destined for stable
  which missed the 3.4-rc7 Kernel.  The second is just a fixture
  addition so exofs is able to be better exported as a cluster file
  system via pNFS."

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: Add SYSFS info for autologin/pNFS export
  exofs: Fix CRASH on very early IO errors.

Pull documentation updates from Jiri Kosina:
 "I am currently relaying documentation patches through 'doc' branch of
  trivial tree, until Rob, the new documentation maintainer, has
  established a proper tree."

* 'doc' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  doc: ext3: update documentation with barrier=1 default
  Documentation/initrd.txt: Change the location of util-linux
  Documentation/SubmittingPatches: suggested the use of scripts/get_maintainer.pl
  Documentation/kernel-parameters: remove autotest and mcatest

Pull misc kbuild changes from Michal Marek:
 "The non-critical part of kbuild for 3.5 includes

   - two new coccinelle checks
   - fix for make deb-pkg to include generated headers in arch/*/include

  I have more make-deb-pkg fixes in the backlog, but these will likely
  have to wait for 3.6."

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  builddeb: include autogenerated header files
  scripts/coccinelle: sizeof of pointer
  scripts/coccinelle: address test is always true

Pull kconfig changes from Michal Marek:

 - Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix
   for a bug that was exposed by this

 - Fix for the script/config utility.

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/config: properly report and set string options
  kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.
  kconfig: Add error handling to KCONFIG_ALLCONFIG

Pull kbuild updates from Michal Marek.

Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell
and linux-next (and trivial arch/sparc/Makefile changes due to removed
sparc32 logic).

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  mips: Fix KBUILD_CPPFLAGS definition
  kbuild: fix ia64 link
  kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
  kbuild: link of vmlinux moved to a script
  kbuild: refactor final link of sparc32
  kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
  kbuild: Makefile: remove unnecessary check for m68knommu ARCH

Pull writeback tree from Wu Fengguang:
 "Mainly from Jan Kara to avoid iput() in the flusher threads."

* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: Avoid iput() from flusher thread
  vfs: Rename end_writeback() to clear_inode()
  vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
  writeback: Refactor writeback_single_inode()
  writeback: Remove wb->list_lock from writeback_single_inode()
  writeback: Separate inode requeueing after writeback
  writeback: Move I_DIRTY_PAGES handling
  writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
  writeback: Move clearing of I_SYNC into inode_sync_complete()
  writeback: initialize global_dirty_limit
  fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
  mm: page-writeback.c: local functions should not be exposed globally

Pull microblaze changes from Michal Simek.

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Setup correct pointer to TLS area
  microblaze: Add TLS support to sys_clone
  microblaze: ftrace: Pass the first calling instruction for dynamic ftrace
  microblaze: Port OOM changes to do_page_fault
  microblaze: Do not select GENERIC_GPIO by default

We're already invalidating the data cache, and setting the new change
attribute. Since directories don't care about the i_size field, there
is no need to be forcing any extra revalidation of the page cache.

We do keep the NFS_INO_INVALID_ATTR flag, in order to force an
attribute cache revalidation on stat() calls since we do not
update the mtime and ctime fields.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The generic version is both easier to support and more correct.
Signed-off-by: NJonas Bonn <jonas@southpole.se>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>