Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 12 8月, 2018 17 次提交
  3. 11 8月, 2018 1 次提交
    • C
      bcache: fix error setting writeback_rate through sysfs interface · 46451874
      由 Coly Li 提交于 
      Commit ea8c5356 ("bcache: set max writeback rate when I/O request
is idle") changes struct bch_ratelimit member rate from uint32_t to
atomic_long_t and uses atomic_long_set() in drivers/md/bcache/sysfs.c
to set new writeback rate, after the input is converted from memory
buf to long int by sysfs_strtoul_clamp().

The above change has a problem because there is an implicit return
inside sysfs_strtoul_clamp() so the following atomic_long_set()
won't be called. This error is detected by 0day system with following
snipped smatch warnings:

drivers/md/bcache/sysfs.c:271 __cached_dev_store() error: uninitialized
symbol 'v'.
270  sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX);
     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@271 atomic_long_set(&dc->writeback_rate.rate, v);

This patch fixes the above error by using strtoul_safe_clamp() to
convert the input buffer into a long int type result.

Fixes: ea8c5356 ("bcache: set max writeback rate when I/O request is idle")
Cc: Kai Krakow <kai@kaishome.de>
Cc: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      46451874
  5. 09 8月, 2018 10 次提交
    • S
      bcache: trivial - remove tailing backslash in macro BTREE_FLAG · cbb751c0
      由 Shenghui Wang 提交于 
      Remove the tailing backslash in macro BTREE_FLAG in btree.h
Signed-off-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      cbb751c0
    • S
      bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section · e921efeb
      由 Shenghui Wang 提交于 
      The pr_err statement in the code for sysfs_attatch section would run
for various error codes, which maybe confusing.

E.g,

Run the command twice:
   echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \
				/sys/block/bcache0/bcache/attach
   [the backing dev got attached on the first run]
   echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \
				/sys/block/bcache0/bcache/attach

In dmesg, after the command run twice, we can get:
	bcache: bch_cached_dev_attach() Can't attach sda6: already attached
	bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\
a8df5e8be891
               : cache set not found
The first statement in the message was right, but the second was
confusing.

bch_cached_dev_attach has various pr_ statements for various error
codes, except ENOENT.

After the change, rerun above command twice:
	echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \
			/sys/block/bcache0/bcache/attach
	echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be891 > \
			/sys/block/bcache0/bcache/attach

In dmesg we only got:
	bcache: bch_cached_dev_attach() Can't attach sda6: already attached
No confusing "cache set not found" message anymore.

And for some not exist SET-UUID:
	echo 796b5c05-b03c-4bc7-9cbd-a8df5e8be898 > \
			/sys/block/bcache0/bcache/attach
In dmesg we can get:
	bcache: __cached_dev_store() Can't attach 796b5c05-b03c-4bc7-9cbd-\
a8df5e8be898
	               : cache set not found
Signed-off-by: NShenghui Wang <shhuiw@foxmail.com>
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      e921efeb
    • C
      bcache: set max writeback rate when I/O request is idle · ea8c5356
      由 Coly Li 提交于 
      Commit b1092c9a ("bcache: allow quick writeback when backing idle")
allows the writeback rate to be faster if there is no I/O request on a
bcache device. It works well if there is only one bcache device attached
to the cache set. If there are many bcache devices attached to a cache
set, it may introduce performance regression because multiple faster
writeback threads of the idle bcache devices will compete the btree level
locks with the bcache device who have I/O requests coming.

This patch fixes the above issue by only permitting fast writebac when
all bcache devices attached on the cache set are idle. And if one of the
bcache devices has new I/O request coming, minimized all writeback
throughput immediately and let PI controller __update_writeback_rate()
to decide the upcoming writeback rate for each bcache device.

Also when all bcache devices are idle, limited wrieback rate to a small
number is wast of thoughput, especially when backing devices are slower
non-rotation devices (e.g. SATA SSD). This patch sets a max writeback
rate for each backing device if the whole cache set is idle. A faster
writeback rate in idle time means new I/Os may have more available space
for dirty data, and people may observe a better write performance then.

Please note bcache may change its cache mode in run time, and this patch
still works if the cache mode is switched from writeback mode and there
is still dirty data on cache.

Fixes: Commit b1092c9a ("bcache: allow quick writeback when backing idle")
Cc: stable@vger.kernel.org #4.16+
Signed-off-by: NColy Li <colyli@suse.de>
Tested-by: NKai Krakow <kai@kaishome.de>
Tested-by: NStefan Priebe <s.priebe@profihost.ag>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      ea8c5356
    • C
      bcache: add code comments for bset.c · b467a6ac
      由 Coly Li 提交于 
      This patch tries to add code comments in bset.c, to make some
tricky code and designment to be more comprehensible. Most information
of this patch comes from the discussion between Kent and I, he
offers very informative details. If there is any mistake
of the idea behind the code, no doubt that's from me misrepresentation.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      b467a6ac
    • C
      bcache: fix mistaken comments in request.c · 0cba2e71
      由 Coly Li 提交于 
      This patch updates code comment in bch_keylist_realloc() by fixing
incorrected function names, to make the code to be more comprehennsible.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      0cba2e71
    • C
      bcache: fix mistaken code comments in bcache.h · cb329dec
      由 Coly Li 提交于 
      This patch updates the code comment in struct cache with correct array
names, to make the code to be more comprehensible.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      cb329dec
    • C
      bcache: add a comment in super.c · e57fd746
      由 Coly Li 提交于 
      This patch adds a line of code comment in super.c:register_bdev(), to
make code to be more comprehensible.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      e57fd746
    • C
      bcache: avoid unncessary cache prefetch bch_btree_node_get() · c2e8dcf7
      由 Coly Li 提交于 
      In bch_btree_node_get() the read-in btree node will be partially
prefetched into L1 cache for following bset iteration (if there is).
But if the btree node read is failed, the perfetch operations will
waste L1 cache space. This patch checkes whether read operation and
only does cache prefetch when read I/O succeeded.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      c2e8dcf7
    • C
      bcache: display rate debug parameters to 0 when writeback is not running · b4cb6efc
      由 Coly Li 提交于 
      When writeback is not running, writeback rate should be 0, other value is
misleading. And the following dyanmic writeback rate debug parameters
should be 0 too,
	rate, proportional, integral, change
otherwise they are misleading when writeback is not running.
Signed-off-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      b4cb6efc
    • C
      bcache: do not check return value of debugfs_create_dir() · 78ac2107
      由 Coly Li 提交于 
      Greg KH suggests that normal code should not care about debugfs. Therefore
no matter successful or failed of debugfs_create_dir() execution, it is
unncessary to check its return value.

There are two functions called debugfs_create_dir() and check the return
value, which are bch_debug_init() and closure_debug_init(). This patch
changes these two functions from int to void type, and ignore return values
of debugfs_create_dir().

This patch does not fix exact bug, just makes things work as they should.
Signed-off-by: NColy Li <colyli@suse.de>
Suggested-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Cc: Kai Krakow <kai@kaishome.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      78ac2107
  7. 27 7月, 2018 9 次提交
  9. 25 7月, 2018 2 次提交
  11. 18 7月, 2018 1 次提交
    • M
      block: Add and use op_stat_group() for indexing disk_stat fields. · ddcf35d3
      由 Michael Callahan 提交于 
      Add and use a new op_stat_group() function for indexing partition stat
fields rather than indexing them by rq_data_dir() or bio_data_dir().
This function works similarly to op_is_sync() in that it takes the
request::cmd_flags or bio::bi_opf flags and determines which stats
should et updated.

In addition, the second parameter to generic_start_io_acct() and
generic_end_io_acct() is now a REQ_OP rather than simply a read or
write bit and it uses op_stat_group() on the parameter to determine
the stat group.

Note that the partition in_flight counts are not part of the per-cpu
statistics and as such are not indexed via this function.  It's now
indexed by op_is_write().

tj: Refreshed on top of v4.17.  Updated to pass around REQ_OP.
Signed-off-by: NMichael Callahan <michaelcallahan@fb.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      ddcf35d3