- 01 8月, 2006 23 次提交
-
-
由 Rafa Bilski 提交于
I lost very important line in do_powersaver Signed-off-by: NRafa Bilski <rafalbilski@interia.pl> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global longhaul_walk_callback() static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Adrian Bunk 提交于
It seems commit 32ee8c3e accidentially reverted cdc9cc1d, IOW, it reintroduced the following compile error with CONFIG_PCI=n: <-- snip --> ... CC arch/i386/kernel/cpu/cpufreq/gx-suspmod.o arch/i386/kernel/cpu/cpufreq/gx-suspmod.c: In function ‘gx_detect_chipset’: arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: error: implicit declaration of function ‘pci_match_id’ arch/i386/kernel/cpu/cpufreq/gx-suspmod.c:193: warning: comparison between pointer and integer make[3]: *** [arch/i386/kernel/cpu/cpufreq/gx-suspmod.o] Error 1 <-- snip --> This patch therefore re-adds the dependency of X86_GX_SUSPMOD on PCI. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Rafa Bilski 提交于
Without this longhaul will always fail when compiled into kernel, as it needs to initialise after the ACPI processor module. I lost this when I was splitting patches. Sorry. Signed-off-by: NRafa Bilski <rafalbilski@interia.pl> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Rafa Bilski 提交于
There is no need to worry about local APIC. There is need to worry about I/O APIC, because I/O APIC is replacing good old 8259. According to Nehemiah datasheet VIA is using 3-wire bus to connect local APIC to I/O APIC. "[...] When IA32_APIC_BASE[11] is set to 0, processor APICs based on the 3-wire APIC bus cannot be generally re-enabled until a system hardware reset. The 3-wire bus looses track of arbitration that would be necessary for complete re-enabling. Certain (local) APIC functionality can be enabled. [...]" So we must set disable bit for each interrupt in I/O APIC registers. Same situation as for PIC - we must poke registers direcly. How to do this? I don't know. So at the moment it is better to fail. Signed-off-by: NRafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Rafa Bilski 提交于
Minimal change necessary for hardware support. Changes in longhaul.c: - most important - now C3 state is causing transition, - code responsible for clearing "bus master" bit removed, - protect bcr2 transition in the same way as longhaul. Signed-off-by: NRafa³ Bilski <rafalbilski@interia.pl> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Michael Hanselmann 提交于
This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Markus Armbruster 提交于
CFA needs to be adjusted upwards for push, and downwards for pop. arch/i386/kernel/entry.S gets it wrong in one place. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Acked-by: NJan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland McGrath 提交于
The latest toolchains can produce a new ELF section in DSOs and dynamically-linked executables. The new section ".gnu.hash" replaces ".hash", and allows for more efficient runtime symbol lookups by the dynamic linker. The new ld option --hash-style={sysv|gnu|both} controls whether to produce the old ".hash", the new ".gnu.hash", or both. In some new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu to the linker, so that a standard invocation of "gcc -shared" results in producing a DSO with only ".gnu.hash". The new ".gnu.hash" sections need to be dealt with the same way as ".hash" sections in all respects; only the dynamic linker cares about their contents. To work with older dynamic linkers (i.e. preexisting releases of glibc), a binary must have the old ".hash" section. The --hash-style=both option produces binaries that a new dynamic linker can use more efficiently, but an old dynamic linker can still handle. The new section runs afoul of the custom linker scripts used to build vDSO images for the kernel. On ia64, the failure mode for this is a boot-time panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed. This patch addresses the problem in two ways. First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash". This produces correct vDSO images with --hash-style=sysv (or old tools), with --hash-style=gnu, or with --hash-style=both. Second, it passes the --hash-style=sysv option when building the vDSO images, so that ".gnu.hash" is not actually produced. This is the most conservative choice for compatibility with any old userland. There is some concern that some ancient glibc builds (though not any known old production system) might choke on --hash-style=both binaries. The optimizations provided by the new style of hash section do not really matter for a DSO with a tiny number of symbols, as the vDSO has. If someone wants to use =gnu or =both for their vDSO builds and worry less about that compatibility, just change the option and the linker script changes will make any choice work fine. Signed-off-by: NRoland McGrath <roland@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andi Kleen <ak@muc.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Brent Casavant 提交于
The SGI IOC4 IDE device always shares an interrupt with other devices which are part of IOC4. As such, IDEPCI_SHARE_IRQ should always be enabled when BLK_DEV_SGIIOC4 is enabled. Signed-off-by: NBrent Casavant <bcasavan@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
Use hotplug version of register_cpu_notifier in late init functions. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chandra Seetharaman 提交于
Few of the callback functions and notifier blocks that are associated with cpu notifications incorrectly have __devinit and __devinitdata. They should be __cpuinit and __cpuinitdata instead. It makes no functional difference but wastes text area when CONFIG_HOTPLUG is enabled and CONFIG_HOTPLUG_CPU is not. This patch fixes all those instances. Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Horms 提交于
This patch is part of an effort to unify the panic_on_oops behaviour across all architectures that implement it. It was pointed out to me by Andi Kleen that if an oops has occured in interrupt context, then calling sleep() in the oops path will only cause a panic, and that it would be really better for it not to be in the path at all. This patch removes the ssleep() call and reworks the console message accordinly. I have a slght concern that the resulting console message is too long, feedback welcome. For powerpc it also unifies the 32bit and 64bit behaviour. Fror x86_64, this patch only updates the console message, as ssleep() is already not present. Signed-off-by: NHorms <horms@verge.net.au> Acked-by: NPaul Mackerras <paulus@samba.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michal Schmidt 提交于
When resuming from suspend-to-RAM, the NMI watchdog detects a lockup in ide_wait_not_busy. Here's a screenshot of the trace taken by a digital camera: http://www.uamt.feec.vutbr.cz/rizeni/pom/DSC03510-2.JPG Let's touch the NMI watchdog in ide_wait_not_busy. The system then resumes correctly from STR. [akpm@osdl.org: modular build fix] Signed-off-by: NMichal Schmidt <xschmi00@stud.feec.vutbr.cz> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miles Bader 提交于
Signed-off-by: NMiles Bader <miles@gnu.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miles Bader 提交于
Signed-off-by: NMiles Bader <miles@gnu.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 bibo, mao 提交于
Kprobe inserts breakpoint instruction in probepoint and then jumps to instruction slot when breakpoint is hit, the instruction slot icache must be consistent with dcache. Here is the patch which invalidates instruction slot icache area. Without this patch, in some machines there will be fault when executing instruction slot where icache content is inconsistent with dcache. Signed-off-by: Nbibo,mao <bibo.mao@intel.com> Acked-by: N"Luck, Tony" <tony.luck@intel.com> Acked-by: NKeshavamurthy Anil S <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tobias Klauser 提交于
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a duplicate of the macro. Also remove some trailing whitespaces and needless braces. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arthur Othieno 提交于
It is described as being experimental, but doesn't actually depend on EXPERIMENTAL. Change the text. Signed-off-by: NArthur Othieno <apgo@patchbomb.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Masami Hiramatsu 提交于
The kprobe-booster's safety check against preemption does not work well now, because the preemption count has been modified by read_rcu_lock() in atomic_notifier_call_chain() before we check it. So, I'd like to prevent boosting kprobe temporarily if the kernel is preemptable. Now we are searching for the good solution. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
One of my original comments in machine_kexec was unclear and this should fix it. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@muc.de> Acked-by: NHorms <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
- Move the tsc synchronisation variables into a struct, mark it __initdata - local `realdelta' wants to be 64-bit - Print the skew for negative skews, as well as for positive ones - remove dead code Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
mce_disabled cannot be __initdata - we access it during APM resume. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 7月, 2006 2 次提交
-
-
由 Geoff Levand 提交于
A minor comment fix for misc_64.S from Takao Shinohara. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jake Moilanen 提交于
On the JS21 systems, they have the SPLPAR hypertas set, but are not SMT capable. So, they are not making the H_CEDE call. This is causing the hypervisor to have to queue up work for the hdecr, taking an excessive amount of time in maintenance code, and causing jitter on the box. Making the H_CEDE call helps alleviate that problem. Signed-off-by: NJake Moilanen <moilanen@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 30 7月, 2006 7 次提交
-
-
由 Andi Kleen 提交于
I didn't test all compilation combinations. Shame on me. And fix a missing option in the boot option following x86-64 (Jan Beulich) Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
It was broken before. But having it is important as possible hardware bug workaround. And previously there was no way to force swiotlb if there is another IOMMU. Side effect is that iommu=force won't force swiotlb anymore even if there isn't another IOMMU. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
As Travis Betak points out it accesses the wrong northbridge subfunction now. Switch back to the old code. Cc: "Travis Betak" <betak@mpdtxmail.amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jon Mason 提交于
Calgary hits a NULL pointer dereference when booting in a multi-chassis NUMA system. See Redhat bugzilla number 198498, found by Konrad Rzeszutek (konradr@redhat.com). There are many issues that had to be resolved to fix this problem. Firstly when I originally wrote the code to handle NUMA systems, I had a large misunderstanding that was not corrected until now. That was that I thought the "number of nodes online" referred to number of physical systems connected. So that if NUMA was disabled, there would only be 1 node and it would only show that node's PCI bus. In reality if NUMA is disabled, the system displays all of the connected chassis as one node but is only ignorant of the delays in accessing main memory. Therefore, references to num_online_nodes() and MAX_NUMNODES are incorrect and need to be set to the maximum number of nodes that can be accessed (which are 8). I created a variable, MAX_NUM_CHASSIS, and set it to 8 to fix this. Secondly, when walking the PCI in detect_calgary, the code only checked the first "slot" when looking to see if a device is present. This will work for most cases, but unfortunately it isn't always the case. In the NUMA MXE drawers, there are USB devices present on the 3rd slot (with slot 1 being empty). So, to work around this, all slots (up to 8) are scanned to see if there are any devices present. Lastly, the bus is being enumerated on large systems in a different way the we originally thought. This throws the ugly logic we had out the window. To more elegantly handle this, I reorganized the kva array to be sparse (which removed the need to have any bus number to kva slot logic in tce.c) and created a secondary space array to contain the bus number to phb mapping. With these changes Calgary boots on an x460 with 4 nodes with and without NUMA enabled. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Muli Ben-Yehuda 提交于
Fixed off-by-one error in detect_calgary and calgary_init which will cause arrays to overflow. Also, removed impossible to hit BUG_ON. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
On Intel systems generally the TSC stops in C3 or deeper, so don't use it there. Follows similar logic on i386. This should fix problems on Meroms. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Update defconfig Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 7月, 2006 8 次提交
-
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas This patch adds #ifdef around some variables in the arch/arm/mm/ioremap.c file. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 George G. Davis 提交于
Patch from George G. Davis As reported by various folks on the ARM Linux kernel mailing list, the video-buf.ko driver has undefined references on all ARM machines which use it as observed during `make modules`: Warning: "v4wb_clear_user_page" [drivers/media/video/video-buf.ko] undefined! Similar warnings exist for all ARM machines which use this driver. So this change adds the missing EXPORT_SYMBOLs to allow using this driver as a module. Signed-off-by: NGeorge G. Davis <gdavis@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek The IOP 80219 xscale CPU is a stripped down version of the IOP32x. But the fact that the 80219 and IOP32x are very similar doesn't mean that they need to share a cpu table entry. It's also somewhat confusing for the end user to see the 80219 reported as an IOP32x, so this patch splits the IOP32x cpu table entry to make a separate entry for the 80219. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andi Kleen 提交于
Similar patch to earlier x86-64 patch. When the dwarf2 unwinder fails dump the left over stack with the old unwinder. Also some clarifications in the headers. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The dwarf2 unwinder currently often gets stuck because a lot of assembly code doesn't have proper dwarf2 annotiation yet. This currently often happens with __down. Should fix this by adding proper dwarf2 annotation to all inline assembly. However until that's done we need a quick fix for 2.6.18 to avoid incomplete backtraces. So when this happens dump the rest of the stack with the old unwinder instead of silently not dumping it. There was already a optional "both" mode that dumped both, but that was too ugly. I also clarified the headers for the different backtraces a bit. Also add a clear error message for missing dwarf2 annotation that people can work on. And I removed a dead variable left over from Ingo's changes. Cc: mingo@elte.hu Cc: jbeulich@novell.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
When int 0x80 is called from long mode r8-r11 would leak out of the kernel (or rather they would be filled with some values from the kernel stack). I don't think it's a security issue because the values come from the fixed stack frame which should be near always user registers from a previous interrupt. Still better fix it. Longer term the register save macros need to be cleaned up to avoid such mistakes in the future. Original analysis from Richard Brunner, fix by me. Cc: Richard.Brunner@amd.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Fixes a obscure user space triggerable crash during oprofiling. Oprofile calls profile_pc from NMIs even when user_mode(regs) is not true and the program counter is inside the kernel lock section. This opens a race - when a user program jumps to a kernel lock address and a NMI happens before the illegal page fault exception is raised and the program has a unmapped esp or ebp then the kernel could oops. NMIs have a higher priority than exceptions so that could happen. Add user_mode checks to i386/x86-64 profile_pc to prevent that. Cc: John Levon <levon@movementarian.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chuck Ebbert 提交于
Recent changes in i386 __switch_to() have a misplaced closing parenthesis causing an unlikely() to terminate early. Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-