The caller doesn't do anything with the dentry, so there's no point in
holding a reference to it on return. Also cifs_prime_dcache better
describes the actual purpose of the function.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

This can reduce the size of the module by ~120KB which
could be useful for embedded systems.

$ size fs/cifs/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 388567	  34459	 100440	 523466	  7fcca	fs/cifs/built-in.o.new
 495970	  34599	 117904	 648473	  9e519	fs/cifs/built-in.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Make the compilation work again when CIFS_DEBUG is not #define'd.

Add format and argument verification for the various macros when
CIFS_DEBUG is not #define'd.
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

We were checking incorrectly if signatures were required to be sent,
so were always sending signatures after the initial session establishment.
For SMB3 mounts (vers=3.0) this was a problem because we were putting
SMB2 signatures in SMB3 requests which would cause access denied
on mount (the tree connection would fail).

This might also be worth considering for stable (for 3.7), as the
error message on mount (access denied) is confusing to users and
there is no workaround if the server is configured to only
support smb3.0. I am ok either way.

CC: stable <stable@kernel.org>
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

It uses an undefined KERN_EVENT and is itself unused.
Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Currently, the code relies on the callers to do that and they all do,
but this will ensure that it's always done.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Now that the smb_vol contains the destination sockaddr, there's no need
to pass it in separately.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Take advantage of accelerated strchr() on arches that support it.

Also, no caller ever passes in a NULL pointer. Get rid of the unneeded
NULL pointer check.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Otherwise, "ls -l" will simply show the ownership of the files as
the default mnt_uid/gid. This may make "ls -l" performance on large
directories super-suck in some cases, but that's the cost of cifsacl.

One possibility to make it suck less would be to somehow proactively
dispatch the ACL requests asynchronously from readdir codepath, but
that's non-trivial to implement.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

The option to have a blank "pass=" already exists, and with
a password specified both "pass=%s" and "password=%s" are supported.
Also, both blank "user=" and "username=" are supported, making
"password=" the odd man out.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

This patch enables optional for original SMB2 (SMB2.02) dialect
by specifying vers=2.0 on mount.
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

If we netogiate mandatory locking style, have a read lock and try
to set a write lock we end up with a write lock in vfs cache and
no lock in cifs lock cache - that's wrong. Fix it by returning
from cifs_setlk immediately if a error occurs during setting a lock.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

that reacquires byte-range locks when a file is reopened.
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

because the is no difference here. This also adds support of prefixpath
mount option for SMB2.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Error out with a clear error message if there is no unc= option. The
existing code doesn't handle this in a clear fashion, and the check for
a UNCip option with no UNC string is just plain wrong.

Later, we'll fix the code to not require a unc= option, but for now we
need this to at least clarify why people are getting errors about DFS
parsing. With this change we can also get rid of some later NULL pointer
checks since we know the UNC and UNCip will never be NULL there.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

If we're using cifsacl, then we don't want to override the uid/gid with
the current uid/gid, since that would prevent you from being able to
upcall for this info.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

...and make those symbols static in cifsacl.c. Nothing outside
of that file refers to them.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

The format specifiers are for signed values, but these are unsigned.
Given that '-' is a delimiter between fields, I don't think you'd get
what you'd expect if you got a value here that would overflow the sign
bit.

The version and authority fields are 8 bit values so use a "hh" length
modifier there. The subauths are 32 bit values, so there's no need to
use a "l" length modifier there.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

According to several places on the Internet and the samba winbind code,
this is hard limited to 15 in windows, not 5. This does balloon out
the allocation of each by 40 bytes, but I don't see any alternative.

Also, rename it to SID_MAX_SUB_AUTHORITIES to match the alleged name
of this constant in the windows header files

Finally, rename SIDLEN to SID_STRING_MAX, fix the value to reflect
the change to SID_MAX_SUB_AUTHORITIES and document how it was
determined.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

...and lift the restriction in id_to_sid upcall that the size must be
at least as big as a full cifs_sid.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

..nothing outside of cifsacl.c calls it. Also fix the incorrect
comment on the function. It returns 0 when they match.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

...instead of hardcoding in '5' and '6' all over the place.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Add a label we can goto on error, and get rid of some excess indentation.
Also move to kernel-style comments.
Reviewed-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Most of these are unsigned ints, so we should be passing "uint" to
module_param. Also, get rid of the extra "(bool)" in the description
of enable_oplocks.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

We had planned to upgrade to ntlmv2 security a few releases ago,
and have been warning users in dmesg on mount about the impending
upgrade, but had to make a change (to use nltmssp with ntlmv2) due
to testing issues with some non-Windows, non-Samba servers.

The approach in this patch is simpler than earlier patches,
and changes the default authentication mechanism to ntlmv2
password hashes (encapsulated in ntlmssp) from ntlm (ntlm is
too weak for current use and ntlmv2 has been broadly
supported for many, many years).
Signed-off-by: NSteve French <smfrench@gmail.com>
Acked-by: NJeff Layton <jlayton@redhat.com>

READ is zero so the "rw & READ" test is always false.  The intended test
was "((rw & RW_MASK) == READ)".
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull module fixes from Rusty Russell:
 "Module signing build fixes for blackfin and metag"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modsign: add symbol prefix to certificate list
  linux/kernel.h: define SYMBOL_PREFIX

Pull UBI changes from Artem Bityutskiy:
 "Fixes for 2 brown-paperbag bugs introduced this merge window by the
  fastmap code:

   1.  The UBI background thread got stuck when a bit-flip happened
       because free LEBs was not removed from the "free" tree when we
       started using it.
   2.  I/O debugging checks did not work because we called a sleeping
       function in atomic context."

* tag 'upstream-3.7-rc9' of git://git.infradead.org/linux-ubi:
  UBI: dont call ubi_self_check_all_ff() in __wl_get_peb()
  UBI: remove PEB from free tree in get_peb_for_wl()

Pull workqueue fixes from Tejun Heo:
 "So, safe fixes my ass.

  Commit 8852aac2 ("workqueue: mod_delayed_work_on() shouldn't queue
  timer on 0 delay") had the side-effect of performing delayed_work
  sanity checks even when @delay is 0, which should be fine for any sane
  use cases.

  Unfortunately, megaraid was being overly ingenious.  It seemingly
  wanted to use cancel_delayed_work_sync() before cancel_work_sync() was
  introduced, but didn't want to waste the space for full delayed_work
  as it was only going to use 0 @delay.  So, it only allocated space for
  struct work_struct and then cast it to struct delayed_work and passed
  it into delayed_work functions - truly awesome engineering tradeoff to
  save some bytes.

  Xiaotian fixed it by making megraid allocate full delayed_work for
  now.  It should be converted to use work_struct and cancel_work_sync()
  but I think we better do that after 3.7.

  I added another commit to change BUG_ON()s in __queue_delayed_work()
  to WARN_ON_ONCE()s so that the kernel doesn't crash even if there are
  more such abuses."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s
  megaraid: fix BUG_ON() from incorrect use of delayed work

Pull sparc fixes from David Miller:
 "Two small fixes for Sparc, nobody uses sparc, so these are low risk :-)

   1) Piggyback is too picky about the symbol types that _start and _end
      have in the final kernel image, and it thus breaks with newer
      binutils.  Future proof by getting rid of the symbol type checks.

   2) exit_group() should kill register windows on sparc64 the same way
      we do for plain exit().  Thanks to Al Viro for spotting this."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix piggyback with newer binutils.
  sparc64: exit_group should kill register windows just like plain exit.

The block device access simplification that avoided accessing the (racy)
block size information (commit bbec0270: "blkdev_max_block: make
private to fs/buffer.c") no longer checks the maximum block size in the
block mapping path.

That was _almost_ as simple as just removing the code entirely, because
the readers and writers all check the size of the device anyway, so
under normal circumstances it "just worked".

However, the block size may be such that the end of the device may
straddle one single buffer_head.  At which point we may still want to
access the end of the device, but the buffer we use to access it
partially extends past the end.

The 'bd_set_size()' function intentionally sets the block size to avoid
this, but mounting the device - or setting the block size by hand to
some other value - can modify that block size.

So instead, teach 'submit_bh()' about the special case of the buffer
head straddling the end of the device, and turning such an access into a
smaller IO access, avoiding the problem.

This, btw, also means that unlike before, we can now access the whole
device regardless of device block size setting.  So now, even if the
device size is only 512-byte aligned, we can read and write even the
last sector even when having a much bigger block size for accessing the
rest of the device.

So with this, we could now get rid of the 'bd_set_size()' block size
code entirely - resulting in faster IO for the common case - but that
would be a separate patch.
Reported-and-tested-by: NRomain Francoise <romain@orebokech.com>
Reporeted-and-tested-by: NMeelis Roos <mroos@linux.ee>
Reported-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

8852aac2 ("workqueue: mod_delayed_work_on() shouldn't queue timer on
0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in
megaraid - it allocated work_struct, casted it to delayed_work and
then pass that into queue_delayed_work().

Previously, this was okay because 0 @delay short-circuited to
queue_work() before doing anything with delayed_work.  8852aac2
moved 0 @delay test into __queue_delayed_work() after sanity check on
delayed_work making megaraid trigger BUG_ON().

Although megaraid is already fixed by c1d390d8 ("megaraid: fix
BUG_ON() from incorrect use of delayed work"), this patch converts
BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such
abusers, if there are more, trigger warning but don't crash the
machine.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Xiaotian Feng <xtfeng@gmail.com>

megaraid use INIT_WORK to declare a hotplug_work, but cast the
hotplug_work from work_struct to delayed_work and
schedule_delayed_work on it.  This is very dangerous, as other part of
delayed_work might be kernel memories allocated by others.

With commit 8852aac2 ("workqueue: mod_delayed_work_on() shouldn't queue
timer on 0 delay"), schedule_delayed_work() will check dwork->timer
before queue_work even when @delay is 0, this causes megaraid code to
hit the BUG_ON() in workqueue code.  Change megaraid code to use
delayed work.
Signed-off-by: NXiaotian Feng <dannyfeng@tencent.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Neela Syam Kolli <megaraidlinux@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org

As ubi_self_check_all_ff() might sleep we are not allowed
to call it from atomic context.
For now we call it only from ubi_wl_get_peb().
There are some code paths where it would also make sense,
but these paths are currently atomic and only enabled
when fastmap is used.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

If UBI is built without fastmap, get_peb_for_wl() has to
remove the PEB manially from the free tree.
Otherwise the requested PEB lives in two trees.
Reported-by: NZach Sadecki <zsadecki@itwatchdogs.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Newer versions of binutils mark '_end' as 'B' instead of 'A' for
whatever reason.

To be honest, the piggyback code doesn't actually care what kind
of symbol _start and _end are, it just wants to find them and
record the address.

So remove the type from the match strings.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>