- 30 12月, 2008 5 次提交
-
-
由 James Smart 提交于
- Fix lock up on rmmod with vports defined by having lpfc_pci_remove_one() invoke fc_vport_terminate() to remove all the vports before invoking fc_remove_host() for the physical port - Fix echotest failure when NPIV is enabled - Add the vport_disable function to the physical port's transport template to make the vport disable attribute visible - Set the vport state to DISABLE on create if the disable flag is true - Call lpfc_alloc_sysfs_attr() for vports so that statistical data collection works on them - Support setting a vport's symbolic name via sysfs by writing to /sys/class/fc_vport/vportX/symbolic_name - Fix create vport fails when link is down or in loop mode. Should be able to be create vports any time NPIV is enabled - Fix slow vport deletes when deleting multiple vports at once Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
In the IOCB completion handler, always check if the node is valid before accessing the node object. Added lpfc_initialize_node() to initialize nodes. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Add kernel-doc function headers to lpfc_scsi.c Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Implement lpfc_pci_suspend_one() and lpfc_pci_resume_one() and register them in the pci_driver table. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Rework RSCN netlink event to send entire RSCN payload Also replaces (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX) with LPFC_NL_VENDOR_ID Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 13 10月, 2008 14 次提交
-
-
由 James Smart 提交于
Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Added new sysfs attribute lpfc_max_scsicmpl_time. Attribute, when enabled, will control target queue depth based on I/O completion time. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Revert the target busy response in favor of the transport disrupted response for node state transitions. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Add support for MSI-X Multi-Message interrupts. We use different vectors for fast-path interrupts (i/o) and slow-patch interrupts (discovery, etc). Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
[jejb: drop rejecting hunk altered by target busy patches] Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Add support for PCI-EEH permanent-disabling a device via lpfc_pci_remove_one() Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous Fixes: - Fix the wrong variable name used for checking node active usage status - Fix numerous duplicate log message numbers - Fix change KERN_WARNING messages to KERN_INFO. - Stop sending erroneous LOGO to fabric after vport is already terminated - Fix HBQ allocates that were kalloc'ing w/ GFP_KERNEL while holding a lock. - Fix gcc 4.3.2 compiler warnings and a sparse warning - Fix bugs in handling unsolicited ct event queue - Reorder some of the initial link up checks, to remove odd VPI states. - Correct poor VPI handling - Add debug messages - Expand Update_CFG mailbox definition - Fix handling of VPD data offsets - Reorder loopback flags - convert to use offsetof() Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Update driver for new SLI-3 features: - interrupt enhancements - lose adapter doorbell writes - inlining support for FCP_Ixx cmds Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous Discovery fixes: - Fix rejection followed by acceptance in handling RPL and RPS unsolicited events - Fix for vport delete crash - Fix PLOGI vs ADISC race condition Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
The fc class now calls scsi_target_unblock after calling the terminate callback, so this patch removes the calls from the drivers. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
We do want to call right back into the queuecommand during the race, so we can just use SCSI_MLQUEUE_TARGET_BUSY. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Acked-by: NJames Smart <James.Smart@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 24 8月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
[jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 12 7月, 2008 5 次提交
-
-
由 James Smart 提交于
Update lpfc driver version to 8.2.7 Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous Fixes: - Fix bug in mbox sysfs interface that locked in EAGAIN if discovery stalled. - Fix missing error message when npiv and loop are true when link up occurs. - Fix panic in lpfc_scsi_cmd_iocb_cmpl: scsi_buf was NULL, but created race conditions with other code paths. - Fix error in sysfs mailbox structure that didn't rezero on next use. - Add missing mempool_free() to attachment failure path - Fix missing put of ndlp structure during driver unload. - Fix applications unable to send mailbox commands during discovery. - Remove unused argument (type) from function lpfc_post_buffer() API - Fix vport name is not shown after hbacmd vportcreate. - Remove repeated code statements. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Rework of the worker thread to make it more efficient. Make a finer-grain notfication of pending work so less time is spent checking conditions. Also made other general cleanups. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
- Fix ADISC timeout on initiators causing devloss timeout on targets - Correct FAN processing : port state vs unreg rpi's wasn't consistent - Correct mismatches between ASICs and PLOGI that would skip PLOGI Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Prior handler was only waiting for I/O on one lun to finish before returning completion. Now, wait for all LUNs on the target. Also performed some rudimentary cleanup while in this code. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 23 4月, 2008 1 次提交
-
-
由 Hannes Reinecke 提交于
lpfc and qla2xxx overwrite the standard 'state' attribute with custom callbacks. So rename the custom attributes to 'link_state' and retain the original meaning of the 'state' attribute. Signed-off-by: NHannes Reinecke <hare@suse.de> Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: NJames Smart <James.Smart@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 20 4月, 2008 1 次提交
-
-
由 Tony Jones 提交于
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: NTony Jones <tonyj@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 4月, 2008 4 次提交
-
-
由 James Smart 提交于
Update lpfc driver version to 8.2.6 Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous Fixes - Allow WRITE_VPARAM command when the virtual port is in a stopped state - Fixed handling of our queue depth max that was unconditionally raising the depth on all vports, rather than just the vport affected. - Fix race in interrupt handler for mailbox processing that did not take out the host lock. - Removed unused functions: find_node, findnode_rpi, and fabric_abort_flogi - Correct misspelled word unsolicited in message 0146 - Correct HW-error 5 handling - it should not reset the adapter - Correct handling of IOCBs, which did not null out our pCmd field before invoking the midlayer io done function. - Changed our maximum supported target id to 4096 Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
PCI Parity and EEH handling Fixes: - Under a PCI Data Parity Error, remove a completion routine callback that was on a command that we had already failed and released. - Under PCI parity error, we were not reinstalling the interrupt handler in the slot_reset callback, so we never became functional again. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 23 2月, 2008 1 次提交
-
-
由 Matthew Wilcox 提交于
Commit 3163f725 introduced locking in lpfc_sli_hbqbuf_fill_hbqs, but missed unlocking on one exit. Reported-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Acked-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 22 2月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch makes the needlessly global lpfc_disable_node() static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NJames Smart <James.Smart@Emulex.Com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 12 2月, 2008 6 次提交
-
-
由 James Smart 提交于
Update lpfc driver version to 8.2.5 Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Fix buffer leaks: - HBQ dma buffer leak at dma_pool_destroy when unloading driver - Fix missing buffer free in slow ring buffer handling Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous discovery fixes: - Flush RSCN buffers on vports when reseting HBA. - Fix incorrect FLOGI after vport reg failed - Fix a potential fabric ELS race condition - Fix handling of failed PLOGI command under high lip rates - Fix FDISC handling - Fix debug logging for npiv handling Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Miscellaneous fixes: - Fix ERRATT flag which was overlapping - Allow RESTART mbx commands through when stopped. - Accept incoming PLOGI when connected to an N_Port. - Fix NPort to NPort pt2pt problems: ADISC and reg_vpi issues - Fix vport unloading error that erroneously cleaned up RSCN buffers - Fix memory leak during repeated unloads - in mbox handling - Fix link bounce vs FLOGI race conditions Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 James Smart 提交于
Correct ndlp referencing issues: - Fix ndlp kref issues due to race conditions between threads - Fix cancel els delay retry event which missed an ndlp reference count Signed-off-by: NJames Smart <james.smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-