- 18 6月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Being named "Crazed Snow-Weasel" instills a lot of confidence in this release, so I'm sure this will be one of the better ones.
-
- 06 6月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 25 5月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 12 5月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 08 5月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
Change the conditional of the outputmakefile rule to be evaluated entirely in make, and add a conditional to not touch the generated makefile when e.g. running 'make install' as root while the build was done as non-root. Also adjust the comment describing this, and move the message printing and redirection to mkmakefile. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 01 5月, 2006 1 次提交
-
-
由 Pavel Roskin 提交于
Remove *.mod files but not .tmp_versions for external builds When "make install" is run as root, .tmp_versions is re-created and becomes owned by root. Subsequent "make" run by user fails because .tmp_versions cannot be removed. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 27 4月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 19 4月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 06 4月, 2006 2 次提交
-
-
由 Andreas Gruenbacher 提交于
When installing external modules with `make modules_install', the first thing that happens is a rm -rf of the target directory. This works only once, and breaks when installing more than one (set of) external module(s). With following fix we have the functionality: - for a in-kernel modules_install the $(MODLIB)/kernel directory will be deleted before module installation - for external modules the existing modules will be left as is assuming one may be building and installign several external modules Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
kbuild added an extra '/' after the directory - resulting in all files being rebuild in a subdirectory. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 05 4月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
This fixes single targets build so it now works relaiably in following cases: - build with mixed kernel source and output files (make single-target) - build with separate output directory (make O=.. single-target) - external module with mixed kernel source and output files (make M='pwd' single-target) - external module with separate kernel source and output files (make O=.. M='pwd' single-target) Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 03 4月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Close of the merge window..
-
- 26 3月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
gcc should handle this anyways, and it causes problems when sprintf is turned into strcpy by gcc behind our backs and the C fallback version of strcpy is actually defining __builtin_strcpy Then drop -ffreestanding from the main Makefile because it isn't needed anymore and implies -fno-builtin, which is wrong now. (it was only added for x86-64, so dropping it should be safe) Noticed by Roman Zippel Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 3月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
As a foundation for reliable stack unwinding, this adds a config option (available to all architectures except IA64 and those where the module loader might have problems with the resulting relocations) to enable the generation of frame unwind information. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org>, Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 3月, 2006 2 次提交
-
-
由 Sam Ravnborg 提交于
The checks performed by scripts/reference_* has been moved to modpost. Remove the files and their reference in top-level Makefile. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
FORCE was not defined => error. Use kbuild infrastructure to call down to the relevant Makefile. This enables us to use the FORCE definition from kbuild. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 20 3月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 13 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
I don't see any use case for the CONFIG_CC_ALIGN_* options: - they are only available if EMBEDDED - people using EMBEDDED will most likely also enable CC_OPTIMIZE_FOR_SIZE - the default for -Os is to disable alignment In case someone is doing performance comparisons and discovers that the default settings gcc chooses aren't good, the only sane thing is to discuss whether it makes sense to change this, not through offering options to change this locally. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 12 3月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
Gaah. Delayed. But all the better for it!
-
- 11 3月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
Rebuilding a previously built tree while using make's -j option from time to time results in the version.h check running at the same time as the updating of .kernelrelease, resulting in UTS_RELEASE remaining an empty string (and as a side effect causing the entire kernel to be rebuilt). Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 3月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
.PHONY: does not take patterns so use FORCE to achive same effect. Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 06 3月, 2006 1 次提交
-
-
由 Paul Smith 提交于
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: NPaul Smith <psmith@gnu.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 05 3月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
Added a dependency so we do full preparation before trying to build single file targets. This fixes a case where Andrew Morton did: make kernel/sched.o rm include/asm make kernel/sched.o -> splat Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 27 2月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 23 2月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
Rebuilding a previously built tree while using make's -j options from time to time results in the version.h check running at the same time as the updating of .kernelrelease, resulting in UTS_RELEASE remaining an empty string (and as a side effect causing the entire kernel to be rebuilt). Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 19 2月, 2006 7 次提交
-
-
由 Mattia Dongili 提交于
Workaround a cscope bug where a trailing ':' in VPATH makes it segfault and let it build the cross-reference succesfully. VPATH=/home/mattia/devel/kernel/git/linux-2.6: cscope -b [1] 17555 segmentation fault VPATH=/home/mattia/devel/kernel/git/linux-2.6: cscope -b Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Adrian Bunk 提交于
Emacs warns if an otherwise empty line starts with a tab. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Move $(CC) support functions to Kbuild.include so they are available in the kbuild files. In addition the following was done: o as-option documented in Documentation/kbuild/makefiles.txt o Moved documentation to new section to match new scope of functions o added cc-ifversion used to conditionally select a text string dependent on actual $(CC) version o documented cc-ifversion o change so Kbuild.include is read before the kbuild file Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Following patch enables depmod support when installing external modules. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
To avoid stale modules located in $(MODVERDIR) aka .tmp_versions/ always delete the directory when building an external module. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Martin Michlmayr 提交于
uname -m on MIPS can give a number of results, such as mips64. We need to add another substitution to the sed call for SUBARCH in the main Makefile. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Support building individual files when dealing with separate modules. So say you have a module named "foo" which consist of two .o files bar.o and fun.o. You can then do: make -C $KERNELSRC M=`pwd` bar.o make -C $KERNELSRC M=`pwd` bar.lst make -C $KERNELSRC M=`pwd` bar.i make -C $KERNELSRC M=`pwd` / <= will build all .o files and link foo.o make -C $KERNELSRC M=`pwd` foo.ko <= will build the module and do the modpost step to create foo.ko The above will also work if the external module is placed in a subdirectory using a hirachy of kbuild files. Thanks to Andreas Gruenbacher <agruen@suse.de> for initial feature request / bug report. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 18 2月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 16 2月, 2006 1 次提交
-
-
由 Benjamin LaHaise 提交于
Commit 296e0855: "kbuild: fix make -jN with multiple targets with O=..." causes a ~95% increase in build time for the kernel. Before: 4m21s after: 8m1.403s. Can we revert this until another approach is found? Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 2月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 03 2月, 2006 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 21 1月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
.kernelrelease was saved in same directory as kernel source also with make O=... Make sure we kick in the normal logic to shift to the output directory when we build .kernelrelease after executing *config. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> ---
-
- 17 1月, 2006 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Paul Mundt 提交于
Currently the CPU subtype options are cluttering up arch/sh/Kconfig somewhat. Given that, this moves all of that in to its own arch/sh/mm/Kconfig. Things like cache configuration are also moved to this new location. This also adds support for strict CPU tuning on newer cores, which requires the addition of as-option. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 1月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
The command 'make all modules_install install' would fail in a virgin tree - pointing at a non-existing directory under /lib/modules/xxx KERNELRELEASE is part of MODLIB and we need to create .kernelrelease before we can properly evaluate KERNELRELEASE, Changing MODLIB to the recursively expanded flavor let it pick up the correct KERNELRELEASE value. Reported by: "Hemmann, Volker Armin" <volker.armin.hemmann@tu-clausthal.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-