The code incorrectly assumes here that the server name (or ip address)
is null-terminated.  This can cause referrals to fail in some cases.

Also support ipv6 addresses.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We plan to use this function elsewhere.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Whoever wrote this had a bizarre allergy to for loops.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This function is a little longer and more deeply nested than necessary.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow mount to do authenticated mounts below the root of the exported tree.
The wording in RFC 2623, sec 2.3.2. allows fsinfo with UNIX authentication
on the root of the export. Mounts are not always done on the root
of the exported tree. Especially autoumounts often mount below the root of
the exported tree.
Some server implementations (justly) require full authentication for the
so-called deep mounts. The old code used AUTH_SYS only. This caused deep
mounts to fail on systems requiring stronger authentication..
The client should try both authentication types and use the first one that
succeeds.
This method was already partially implemented. This patch completes
the implementation for NFS2 and NFS3.
This patch was developed to allow Debian systems to automount home directories
on Solaris servers with krb5 authentication.

Tested on kernel 2.6.24-etchnhalf.1
Signed-off-by: NE.G. Keizer <keie@few.vu.nl>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The fattrs used in the NFSv3 getacl/setacl calls are not being properly
initialized. This occasionally causes nfs_update_inode to fall into
NFSv4 specific codepaths when handling post-op attrs from these calls.

Thanks to Cai Qian for noticing the spurious NFSv4 messages in debug
output from a v3 mount...
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We *do* now allow bsd flocks over nfs.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Unfortunately, BUG_ON(IS_ROOT(dentry)) can happen inside
nfs_follow_mountpoint with NFS running Fedora 8 using a
specific setup.
https://bugzilla.redhat.com/show_bug.cgi?id=458622

So, the situation should be handled on NFS client gracefully.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Trond Myklebust <Trond.Myklebust@netapp.com>
CC: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Basically, try_module_get here are pretty useless. Any other module using
this API will pin sunrpc in memory due using exported symbols.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace NULL with ERR_PTR(-EINVAL).
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This patch fixes the following compile error caused by
commit f9247273
(UFS: add const to parser token tabl):

<--  snip  -->

...
  CC      fs/nfs/nfsroot.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/nfs/nfsroot.c:130: error: tokens causes a section type conflict
make[3]: *** [fs/nfs/nfsroot.o] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, if two processes are both trying to revalidate metadata for the
same inode, they will find themselves being serialised. There is no good
justification for this now that we have improved our ability to detect
stale attribute data, so we should remove that serialisation.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that it sets the inode metadata under the correct spinlock.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we're merely checking the inode attributes because we suspect that the
'updated' attributes returned by the RPC call are stale, then we shouldn't
be doing weak cache consistency updates or clearing the cache_validity
flags.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In the case where there are parallel RPC calls to the same inode, we may
receive stale metadata due to the lack of ordering, hence the sanity
checking of metadata in nfs_refresh_inode().
Currently, __nfs_revalidate_inode() is calling nfs_update_inode() directly,
without any further sanity checks, and hence may end up setting the inode
up with stale metadata.

Fix is to use nfs_refresh_inode() instead of nfs_update_inode().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we believe that the attributes are old (see nfs_refresh_inode()), then
we shouldn't force an update.
Also ensure that we hold the inode->i_lock across attribute checks and the
call to nfs_refresh_inode_locked() to ensure that we don't race with other
attribute updates.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently nfs_refresh_inode() will only update the inode metadata if it
sees that the RPC call that returned the nfs_fattr was started
after the last update of the inode. This means that if we have parallel
RPC calls to the same inode (when sending WRITE calls, for instance), we
may often miss updates.

This patch attempts to recover those missed updates by also accepting
them if the ctime in the nfs_fattr is more recent than the inode's
cached ctime.
It also recovers the case where the file size has increased, but the
ctime has not been updated due to limited ctime resolution.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Try to avoid taking and dropping the inode->i_lock more than once. Do so by
moving the code in nfs_refresh_inode() that needs to be done under the
spinlock into a function nfs_refresh_inode_locked(), and then having both
nfs_refresh_inode() and nfs_post_op_update_inode() call it directly.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add the following NFS-specific mount options to the parser.

    -o lookupcache=all          /* Default: cache positive & negative
                                   dentries */
    -o lookupcache=pos[itive]   /* Don't cache negative dentries */
    -o lookupcache=none         /* Strict revalidation of all dentries */
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The point of introducing text-based mounts was to allow us to add
functionality without having to worry about legacy binary mount formats.
The mask should be there in order to ensure that binary formats don't start
enabling features that they cannot support. There is no justification for
applying it to the text mount path.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add the flag NFS_MOUNT_LOOKUP_CACHE_NONEG to turn off the caching of
negative dentries. In reality what we do is to force
nfs_lookup_revalidate() to always discard negative dentries.

Add the flag NFS_MOUNT_LOOKUP_CACHE_NONE for enforcing stricter
revalidation of dentries. It forces the revalidate code to always do a
lookup instead of just checking the cached mtime of the parent directory.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of causing umount requests to block on server->active_wq while the
asynchronous sillyrename deletes are executing, we can use the sb->s_active
counter to obtain a reference to the super_block, and then release that
reference in nfs_async_unlink_release().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

After the BKL removal patches were applied to the rest of the NFS code, the
BKL protection in nfs_file_llseek() is no longer sufficient to ensure that
inode->i_size is read safely in generic_file_llseek_unlocked().

In order to fix the situation, we either have to replace the naked read of
inode->i_size in generic_file_llseek_unlocked() with i_size_read(), or the
whole thing needs to be executed under the inode->i_lock;
In order to avoid disrupting other filesystems, avoid touching
generic_file_llseek_unlocked() for now...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* Theodore Ts'o (tytso@mit.edu) wrote:
>
> I've been playing with adding some markers into ext4 to see if they
> could be useful in solving some problems along with Systemtap.  It
> appears, though, that as of 2.6.27-rc8, markers defined in code which is
> compiled directly into the kernel (i.e., not as modules) don't show up
> in Module.markers:
>
> kvm_trace_entryexit arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-intel  %u %p %u %u %u %u %u %u
> kvm_trace_entryexit arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
> kvm_trace_handler arch/x86/kvm/kvm-amd  %u %p %u %u %u %u %u %u
>
> (Note the lack of any of the kernel_sched_* markers, and the markers I
> added for ext4_* and jbd2_* are missing as wel.)
>
> Systemtap apparently depends on in-kernel trace_mark being recorded in
> Module.markers, and apparently it's been claimed that it used to be
> there.  Is this a bug in systemtap, or in how Module.markers is getting
> built?   And is there a file that contains the equivalent information
> for markers located in non-modules code?

I think the problem comes from "markers: fix duplicate modpost entry"
(commit d35cb360)

Especially :

  -   add_marker(mod, marker, fmt);
  +   if (!mod->skip)
  +     add_marker(mod, marker, fmt);
    }
    return;
   fail:

Here is a fix that should take care if this problem.

Thanks for the bug report!
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: N"Theodore Ts'o" <tytso@mit.edu>
CC: Greg KH <greg@kroah.com>
CC: David Smith <dsmith@redhat.com>
CC: Roland McGrath <roland@redhat.com>
CC: Sam Ravnborg <sam@ravnborg.org>
CC: Wenji Huang <wenji.huang@oracle.com>
CC: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: call touch_softlockup_watchdog on resume
  kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: gart iommu have direct mapping when agp is present too

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: workaround for bogus gcc warning in ide_sysfs_register_port()
  ide-cd: Optiarc DVD RW AD-7200A does play audio
  IDE: Fix platform device registration in Swarm IDE driver (v2)
  ide-dma: fix ide_build_dmatable() for TRM290
  ide-cd: temporary tray close fix

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP27: Fix build errors if CONFIG_MAPPED_KERNEL=y
  [MIPS] Fix CMP Kconfig configuration and mark as broken.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits)
  V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue
  V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U
  V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.
  V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.
  V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.
  V4L/DVB (9053): fix buffer overflow in uvc-video
  V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow
  V4L/DVB (9037): Fix support for Hauppauge Nova-S SE
  V4L/DVB (9029): Fix deadlock in demux code
  V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick
  V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick
  V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600
  V4L/DVB (8963): s2255drv field count fix
  V4L/DVB (8961): zr36067: Fix RGBR pixel format
  V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h
  V4L/DVB (8958): zr36067: Return proper bytes-per-line value
  V4L/DVB (8957): zr36067: Restore the default pixel format
  V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open
  V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800)
  V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.
  ...

The atmel-mci driver sometimes fails data transfers like this:

   mmcblk0: error -5 transferring data
   end_request: I/O error, dev mmcblk0, sector 2749769
   end_request: I/O error, dev mmcblk0, sector 2749777

It turns out that this might be caused by the BLKR register (which
contains the block size and the number of blocks being transfered) being
initialized too late. This patch moves the initialization of BLKR so
that it contains the correct value before the block transfer command is
sent.

This error is difficult to reproduce, but if you insert a long delay
(mdelay(10) or thereabouts) between the calls to atmci_start_command()
and atmci_submit_data(), all transfers seem to fail without this patch,
while I haven't seen any failures with this patch.
Reported-by: NHein_Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The softlockup watchdog needs to be touched when resuming the from the
kgdb stopped state to avoid the printk that a CPU is stuck if the
debugger was active for longer than the softlockup threshold.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius).  As a result, thermal throttling kicks in
and knock the system down to its shoes.

Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.

On my box it was caused by:

commit 691874fa
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Tue May 27 21:19:51 2008 +0100

    x86: I/O APIC: timer through 8259A second-chance
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

and the whole story is described in this (huge) thread:

    http://marc.info/?l=linux-kernel&m=121358440508410&w=4

Matthew Garrett told us about that happening on the nx6125:

    http://marc.info/?l=linux-kernel&m=121396307411930&w=4

and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:

    http://marc.info/?l=linux-kernel&m=121401068718826&w=4

As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.

It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: NJason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Because sync-r4k.c doesn't build.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Reported-by: N"Steven Noonan" <steven@uplinklabs.net>
Suggested-by: N"Elias Oltmanns" <eo@nebensachen.de>
Cc: mingo@elte.hu
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The Optiarc DVD RW AD-7200A can play audio, but tells it could not.
Signed-off-by: NBodo Eggert <7eggert@gmx.de>
Tested-by: NNick Warne <nick@ukfsn.org>
Received-from: Borislav Petkov <petkovbb@googlemail.com>
[bart: keep "audio" quirks together]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes,
judging from the code immediately preceding this check.  So, we must never try
to "split" the PRD for TRM290.

This is probably never hit anyway -- with the DMA buffers aligned to at least
512 bytes and ATAPI DMA not being used for non block I/O commands...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>